About screen resolution for large displays

Can someone PLEASE tell me:
Is it possible to set the second display for your 15" Macbook Pro to higher than 1490x900 (somehow even if it's with third party software), up to for example 1920x1200 to utilise the new LED Cinema Display properly, or do you just run a blown up 1440x900?
This question applies to the new AND old Macbook Pros please...
Thanks

Hi pjmpjm: I run an external 20" from my MacBook Pro, it quite easily runs at it's native resolution of 1680X1050. When operating in extended desktop mode it will adapt to the native resolution of the external monitor.
Hope this helps
Stedman

Similar Messages

  • Resizing  Screen Resolution for Specific Apps?

    Hello team,
    Is it possible to resize screen resolution for specific applications? Most of my apps look fine at 1024x768, but there are a couple of older OS 9 apps that I need to run (talking school computers here) which are a bit on the small side when viewed at that resolution. Can I somehow set things so that when those applications are launched, the resolution changes to 800x600, and then reverts to 1024x768 when they're quit again? Any and all details about this will be most appreciated, and I thank you in advance for your help!
    Electronically yours,
    Erik D. Dahlin
    School-based Technology Specialist

    LCD panels must be used at their native resolution. Whatever it is for you monitor is what you must set it to.
    Bob

  • How we will maintain screen resolution for tmaintaining able control in BDC

    how we will maintain screen resolution for tmaintaining able control in BDC. can you give the code or how we have to set it

    Hi,
    You need to use the CTU_PARAM options with the call transaction method.This is used if you would like to do a commit work once call trnasaction is done. This has also got very important property, for example if your Screen resolution is different from others then the screen (Application) will be different that is you'll be having say 5 lines in your screen where as your friend will be having 8 or 10 so your program might fail in this case. If you set variable DEFSIZE as 'X' it will always use the default screen size and hence avoids error.
    Use CALL TRANSACTION 'XXX' OPTIONS FROM w_ctu_params.( type CTU_PARAMS)
    This structure contains the follwing.
    DISMODE : Display mode (like the MODE addition)
    UPDMODE: Update mode (like the UPDATE addition)
    CATTMODE: CATT mode (controls a CATT)
    CATT mode can have the following values:
    ' ' No CATT active
    'N' CATT without single-screen control
    'A' CATT with single-screen control
    DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
    RACOMMIT: Do not end transaction at COMMIT WORK
    NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
    NOBIEND : No batch input mode after the end of BDC data.
    The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
    'X' Yes
    This might help u in better understanding...
    Re: regarding bdc
    Re: ctu_params
    Regards
    Sudheer

  • 11gr1 - Handling different screen resolutions for an enterprise app.

    Hi,
    We are developing an enterprise application that will be deployed at different clients with different hardware.
    We are confused about how to handle different screen resolutions and wonder how others are handling this.
    We have some fixed size areas in our screens and liquid areas for content that may expand. The problem is say that you have a table with 6 columns. This table will be rendered nicely at 1280X800 but not at 1650X1050 or 800X600.
    At higher resolutions we will either end up having some blank space or expand one of the columns of the table , but can't expand every column proportionally and this will look ugly.
    For lower resolutions same problem in a different way will come into picture, we will not able to resize the columns and end up with scroll bars etc ...
    What is the best practice with handling different screen resolutions for components like table,panel splitter etc ?
    Thanks

    Hi Muhammed,
    I don't think that any better solution exists, you already use liquid layouts and define widths & heights with percentages etc. In my opinion using blank column at the end of table columns makes table's looking better. Additionally creating custom skin for table and defining column heights & widths with % or em may help you to stretch columns?

  • Optimum Screen Resolution for Slides

    I need to create a few slides which will be displayed full-screen. Since
    there's no way to know the resolution of the monitors of the many
    participants, how do I choose the resolution of my slides? Are they
    downsampled in any way by the Adobe server when I upload them? My screen
    resolution is 1920 x 1200 but I suspect a slide built to that resolution
    would create problems for viewers on smaller monitors. Am I right? Is
    there an optimum screen resolution for slides viewed during a Connect Pro
    session?

    Natively you'll get a resolution of 1440 x 900 or you can pay for an upgrade  to 1680 x 1050(current models).

  • Screen resolution for Fusion Applications?

    We are in process to set screen resolution standard for our ADF applications. We are much interested to know about supported screen resolution in fusion applications. Can any body let us know what is minimum required resolution for fusion applications? And what is recommended resolution?

    It is 1280*1024 as per
    Standard Screen Resolution for Fusion Apps

  • What is the optimum screen resolution for Macbook Pro 15 inch?

    Hi, can anyone please provide advice on the optimum screen resolution for a 15 inch MacBook Pro?

    Natively you'll get a resolution of 1440 x 900 or you can pay for an upgrade  to 1680 x 1050(current models).

  • Photoshop Resolution for Retina Display

    Hi,
    I am a iPhone/iPad UI designer. I have a question that I wanted to solve for a long time. I have created a graphics for native apps,i.e. 300x180 px with 72 ppi resolutions. Also created the same graphics 300x180 px dimension with 326ppi. For retina display will the both images be treated same? Is there will be any blurryness when zoom?
    I mean to say when I suppose to send the assets of the apps to developers 326ppi resulution is necessary? or 72ppi will create same effects with the same pixel dimension?
    Please find the attachments.
    Thanks in advance.
    72 ppi

    Hi ericsil24,
    Hold down the Option key while selecting a resolution for your display.
    OS X Mavericks: Adjust your display resolution
    Take care,
    Nubz

  • 24"iMAC optimal screen resolution for photo processing

    I have a 24" iMAC (matte) and do mostly photo editing. What is the optimal screen resolution for photo processing work?
    thanks
    a/d/

    All Screens are 72 dpi (dots per inch- in reference to pixels) no matter what screen resolution you use. The only difference the screen resolution will make is the size of the photo when you are viewing. Higher resolution means the picture will take up less space in you work area, but you will most likely have to zoom in to edit finer areas. Lower resolution will cause the picture you are editing to take up more of your work space and to see multiple photos side by side you will have to zoom out of fron the photos. So, really the choice is up to you.
    When creating the original document, this is where you need to monitor the dpi. The higher the dpi, the clearer your photo will look in print. A high dpi also means more disk space is being taken up by the photo. Generally a good dpi for print is 300 dpi. Anything that is only purposed for a screen based project (i.e. internet logos) should be saved at 72 dpi. Why use disk space and cause your pages to take longer load if no one will be able to tell the difference on screen between 72 and 300 dpi?
    Hope this helps!

  • Screen Resolution for CS4 apps?

    I'm finding my 22" screen distorts my files. What are some tips for the best screen resolution for the following:
    PhotoShop
    Illustrator
    InDesign
    Dreamweaver
    This is Windows XP Pro.
    Thanks for your help.

    LCD panels must be used at their native resolution. Whatever it is for you monitor is what you must set it to.
    Bob

  • Screen resolution for iPhoto

    Screen resolution for iPhoto-I keep getting the message when I open iPhoto,"screen resolution not optimal for iPhoto". How do I find what is the optimal resolution?

    See this previous discussion
    Re: When I open iPhoto I get on the screen The currant screen resolution is not optimal for iPhoto

  • Setting different resolutions for different displays?, setting different resolutions for different displays?

    Hi,
    I have a 30" dell display that I have used with my MBP. I recently got a MBA and installed mountain lion.  One of the things they inexplicably removed was the ability in the menu bar to set different resolutions for different displays. The only way I can get my Dell Monitor to work is to use mirroring. But I don't want mirroring. I want two separate displays.  In Snow Leopard, the drop down display menu in the menu bar allowed you to pick different resolutions for different displays. Is there any possible way to do that in Mountain Lion?
    Tom

    Yes, assuming that the 8" display has a resolution that the Mac can support. When you open the Displays system preference, you'll get a settings window on each display (as long as the option for Mirroring isn't checked).
    Regards.

  • Proper screen resolution for optimum work with SD

    A couple of questions.
    I've just set up a 27" IMAC with FC. What's surprised me is the poor quality of the SD image I'm getting in the Viewer and Canvas. Two years ago I edited another SD project on a system using two 24" Apple monitors, and at that time we were all amazed by the quality of the image. Hardly looked like SD at all. We were even impressed when we looked at the work on the full screen. Yet that's not what I'm getting now.
    I'm just wondering if there as been a change in the most recent version of FC. (Mine is FCP 7;I don't know what version I was using two years ago on that other project.) I looked in the manual and under "Viewer/Pop-Up Menu" I read: "+If the Viewer is scaled to anything other than 100 percent and you're displaying a DV clip, only one field is shown during playback or while scrubbing through the clip+." Has this always been the case with DV, which my SD footage is? Could my problem only be a problem with this latest version of FC?
    As it is, set optimally on the 27" with a second monitor for the Browser, my Viewer and Canvas are producing a 199% size image. So given that, plus the fact that I'm only seeing one field, maybe I shouldn't be surprised at the weak image I'm getting.
    Second question.
    After reading about this loss of one field when the DV image is other than 100% I thought I'd set the Viewer pop-up menu to 100% rather than "Fit Window". Problem here, of course is that my image is now very small - a diagonal of only 7 inches. To try and deal with this I've played around with the IMAC screen resolution and when I change it from 2560x1440 to 1920X1080 I can get a 100% two field image with a 9 1/2 inch diagonal. Not great but better.
    Does anyone think this is a recommended way to go? I'm always confused about how a monitor is reproducing a format that is 525 TV lines so the issue of the optimal resolution on my screen is confusing me. (I tried setting the screen to 1600X900. Now my 100% image is 11 1/2 inches but there is a very noticeable drop in image quality.)
    Thanks for any help or advice I can receive.
    John

    Has this always been the case with DV, which my SD footage is?
    Yes. Perhaps you old system had the Viewer and Canvas windows set to 100% and your new one doesn't.
    Could my problem only be a problem with this latest version of FC?
    Not likely.
    As it is, set optimally on the 27" with a second monitor for the Browser, my Viewer and Canvas are producing a 199% size image. So given that, plus the fact that I'm only seeing one field, maybe I shouldn't be surprised at the weak image I'm getting.
    BINGO!
    For best results, always use a properly calibrated, external TV monitor for critical viewing when editing.
    -DH
    Message was edited by: David Harbsmeier

  • Minimum Screen Resolution for Premiere Pro CS3

    I want to be able to run the package on my laptop when out and about, but the
    screen resolution is only 1024 x 768. Can anyone tell me whether it will run under said resolution, but with a crowded screen or will it simply not work. I have not yet bought the product yet, and this could be a deciding factor.
    Thanks in advance for any help.
    Maurice

    That's what I am running and it has been awesome over the last two days with the only exception being a "Desktop Display Mode has been reset because the video card returned an error." I thought I had this problem licked until I got it again this afternoon and now it won't go away.
    - Matt

  • Moan about screen resolution

    This is a general moan (hopefully Steve Jobs will read it and come up with a solution)...
    Like a number of other posters in this forum, I am finding the resolution of my new iMac 20" a real struggle. I want to display it at its natural resolution of 1680 x 1050 in order to attain a crisp, clean display. However at this resolution the navigators (gumdrops, scroll bars, twisties in Mail, etc) are only about 3mm wide. Now I'm pretty adept with a mouse, but I have to really look in order to click accurately on these navigators. It slows me down no end and is VERY frustrating.
    Surely it would be possible to have a System Preference for increasing the size of the general navigators, similar to present features that allow changing icon sizes.
    Regards,
    Mark.

    I am thoroughly confused by your question. It seems like you want to tackle this problem the wrong way around, a web page should be able to render on all resolutions you want to support, you do not start adjusting screen resolutions :s

Maybe you are looking for