About snapshot types

hi all,
what is periodic snapshot and accumulating snapshot.
thanks and regards,
sri ram.

snapshots are a picture of system in a particular time. they holds info about top sqls by cpu, by db time, what the memory components' area size etc...
in periodic snapshots, (at default) every one hour, system take a picture and save it. so you can find info about what the top sqls was 5 hours ago.
in accumulating snapshot, a snapshot created first and then every one hour when a snapshot is taken, this info added to created one and averege info is shown in snapshot. for ex; first time buffer cache was 100M, at second snapshot, it was 120M then you will see 110M in your first snapshot anymore and this will go on by adding new snapshots. so you can find what the top 10 sql was in your system from 08:00 to 13:00.
sorry for my bad english.
Edited by: Mustafa KALAYCI on 06.Eki.2010 15:45

Similar Messages

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

In the URL bar, type about:config Type geo.enabled Double click on the geo.enabled preference Location-Aware Browsing is now disabled, does not work How do you turn this Off!

In the URL bar, type about:config
Type geo.enabled
Double click on the geo.enabled preference
Location-Aware Browsing is now disabled
Google will not remove their location aware feature saying it is picked up by the location aware feature in my firefox browser and referred me to your like where I found the above to disable this feature. It just sent me to a yahoo search page. How do you disable this I want to use US Google not Google.ua and you don't need this to help me locate anything in the Ukraine. When I take my laptop with me on trips does my firefox local change wherever I go?

See:
* http://www.mozilla.com/firefox/geolocation/
*http://browserspy.dk/geolocation.php

Documentation about variable types & their processing in i_step = 1, 2 etc.

Hello experts,
is there any documentation about variable types and their processing in i_step = 1, 2 etc.? I know there is note 492504 "Dependent customer exit-type variables", but I don't understand, whether a variable which is NOT "Ready for input" will be processed in i_step = 1 or not (quote of SAP library: "i_step = 1: Call takes place directly before variable entry."). I experienced coincidentally, that some variables not "Ready for input" will be processed there and some not.
Furthermore it is an error, isn't it? Why has a variable without input possibility to be processed before input? Is this really the case?
Confused, any hints are welcomed!
Regards M.L.

for I_STEP = 1
Call before the variable screen .
for I_STEP = 2
Call after variable entry. This step is only started up when the same variable is not input ready and could not be filled at I_STEP=1.
for I_STEP = 3
In this call, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called again.
for I_STEP = 0
The enhancement is not called from the variable screen. The call can come from the authorization check or from the Monitor.
There is a good HOW to Guide which explains the importance of I_STEP :
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000078090&_SCENARIO=01100035870000000112&_OBJECT=011000358700002762582003E
Another from SDN:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/bw-and-portals-05/five%20ways%20to%20enhance%20sap%20bi%20backend%20functionality%20using%20abap.pdf

How could I retrieve metadata about Array Type and Table Type?

I use DatabaseMetaData.getUDTs() method for obtain metadata about Object Types, but this method doesn't work with Array Type and Table Type.

JJ,
Go into the diagrams of the DBTools List Columns and DBTools Get Properties respectively. When you inspect this diagram, you will see the raw ActiveX properties and methods called to get the size information. The value of -1 means the requested recordset is already closed. This is the sort of thing that is controled by the driver (ODBC, OLE DB, Jet, etc) you are using. Notice that you can right click on the property and invoke nodes and get more information about these specific items directly from the ADO online help.
Crystal

Problem about Valuation Type For MRP

Dear all,
I am managing our materials by valuation type.
But, when I run MRP for these materials, I do not know which specific about valuation type.
Can you help me?
Thanks all
TINDT

As per my best knowledge in standard system you cannot force MRP to manage (plan) your goods based on valuation type.
In case of configurable materials you can do separate planning:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/504853a39a11d191930000e8a5f6e6/frameset.htm
Edited by: Csaba Szommer on Aug 5, 2010 10:06 AM
(If you are saying that the valuation type is not defaulted, please reade OSS note 15297)
Edited by: Csaba Szommer on Aug 5, 2010 10:10 AM

Plz tell me about different types of derived classes used in Java program

i wan't to learn about different types of derived classes used in Java programming

cool down bro i am new here i don't how it works
here.well i will try to be specific frm now on. thank
anywaysIt's not about "how things work here". The same is true for anything in life. How do you expect anyone to give you an answer when you cannot give a clear description.
You: "My car sorta ya know don't work. Canya sorta ya know fix it"
Mechanic:"WTF?"

What is the HyperV recovery snapshot type?

According to the CreateSnapshot there are two types of snapshot Full and Disc snapshot. But from MS samples (and MS patent) i found that there is also SnapshotTypeRecoverySnapshot
with id 32768 and name "Microsoft:Hyper-V:Snapshot:Recovery". I found that it is created very fast. Much faster then full and it works well. Who know what is that snapshot type and what is difference from Full and disc? (I found that when i
create recovery snapshot - the snapshot tree isn't created)

There are recovery checkpoints created within the OS.
There are checkpoints taken when you select 'create snapshot / checkpoint'
There are VSS snapshots taken by the VSS writer for backup purposes.
Since you are talking full and disk - I will narrow back to VM checkpoints - these happen very quickly, they simply add a differencing disk into the virtual disk path. And then all writes end up there. Copy on write was the very old name for
differencing disk files.
In the API there is the current configuration, and then there are checkpoint configurations. You don't query the configuration once and get the whole tree back.
A disk snapshot is equivalent to the VM not being powered on - no running memory state is captured.
Full is what is taken when a running memory state is included.
The recovery snapshot sounds like the VSS writer integration which has special hooks for Hyper-V that trickle the VSS snapshot action down into the VM. So that applications int he VM can flush cache to disk prior to the capture of the backup.
This is specific to backup. Not the same as a VM checkpoint.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

About value type and key figure type

Hello Gurus,
please explan the different usage of about value type and key figure type. what is the typical values for both infoobjects ?
Many thanks,
Frank

Hi,
0METYPE is a key figure-specific info object usually used to define semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values).
Its a bi specific field which is filled from extract structure field named MEASTYPE table COSR
Refer to OSS Note 523742 for how it is filled and the following link for additiona information.
http://help.sap.com/saphelp_nw70/helpdata/en/91/ddd52b9ef30645a338e28aae443807/frameset.htm
Note 523742 - BCT-CO: BW key figure model and R/3 tables for trans. data
This note provides information on the key figure model in the area of BW Content CO-OM. It also gives an overview of the DataSources for transaction data and the corresponding source tables and value fields in the R/3 System.
The key figure model for currency fields in the area of CO-OM contents affects the following info object of type key figure:
0AMOUNT Amount
The key figure itself does have any business semantics.
The semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values) is determined using combinations of values for the following key figure-specific info objects (see also the account model in SEM-BPS, note 407563):
0METYPE Key figure type
0VTYPE Value type for reporting
--> 0VTDETL Details of the value type
--> 0VTSTAT Statistics indicator for the value type.
For example, using transaction SE16, the possible characteristics of the values of this InfoObject can be taken from the above-mentioned master data tables in R/3.
The business key figures on the InfoCubes of the standard BW content were defined as restricted key figures using this semantics of the key-figure-specific characteristics.
The conversion of the R/3 transaction data in the BW key figure model is carried out in the extractors using the ROMI_GET_VTYPE_AND_DETAIL function module. It primarily happens using the specified conversion tables.
The following dependencies exist for the source tables of the DataSources:
COSP_VTYPE for COSS, COSP, COVP,
COSB_VTYPE for COSB,
BPXX_VTYPE for BPGE, BPJA, BPEE
If an R/3 source record cannot be converted using these tables, it may not be extracted to BW.The application log of the R/3 DataSource transaction RSA3 contains entries for the unconverted values after the test run.(The log function for the CO-OM DataSources was considerably improved by the correction for note 523655).
The application log for the extraction runs from BW can be evaluated using transaction SLG1 (Object: RSAP, object information: RSAP_INFO)
Furthermore, the semantics of a key figure are still determined by the time characteristics and the following key-figure-specific info objects:
0CURTYPE Currency type (for more information, see note 517909),
0DB_CR_IND Debit/credit indicator (for more information, see note 065075),
0VERSION CO version
-Vikram

About Document type: RE vs G2

Dear forummates:
I am working in SD (again), as I have been working in other SD areas in the past, I have a doubt about billing: The standard Return process: In my country every return must be documented with a Credit Note. As far as I have been researching the return process (Doc.Type RE) ends in a Credit Memo. It is required that this process ends with a Credit Note after the Credit Memo?, what depends on?
Tnahks,
Edited by: Francisco Maureira on Sep 22, 2008 3:05 AM

Hi,
As a terminology Credit note and Credit memo both are same and have same treatment in the accounting side. In case of customer returns, credit note is issued to the customer for return material and in case of any excess amount charged the customer then those times credit memo is issued.
Regards
Goutham

Java5: Can't find a way to get rid of warnings about generic types

Hi all,
i have this method:
    public static void insert(List list, int index, Object obj) {
        list.add(obj);
        int j = list.size() - 1;
        for (; j > index; j--) {
            list.set(j - 1, list.get(j));
        list.set(index, obj);
    }I get 3 warnings. All about:
Type safety: The method add(Object) belongs to the raw type List. References to generic type List<E> should be parameterized
I can't find a way to rewrite this method (Java5), that i get no warnings compiling it and calling it with:
List<AnyClass> list = new ArrayList<AnyClass>();
list.add(new AnyClass());
AnyClass ac = new AnyClass();
insert(list, 0, ac);May be you know another way to insert an element to a List?
Thanks

Never tried it and do not have 5.0 installed to test
it, but what if you define the ArrayList as follows?
List<Object> list = new ArrayList<Object>();
That should get rid of the warnings.

Clarification sought about Application type and library availability

I am new to Adobe's product line and am confused about something and would be grateful for some clarification.
In Flex Builder 3 when creating a new Project, there is an Application type radio button:
O Web application (runs in Flash Player)
O Desktop application (runs in Adobe AIR)
Is my understanding correct that if I choose "Web application", classes identified in the documentation as "AIR only" (e.g. HTMLLoader class) will be unavailable to my app?
Here's the source of my confusion. The class is called flash.html.HTMLLoader and the class is found in the flash.html package, but the documentation reads "(AIR only)".
Do I have to choose "Desktop application" when creating the new project if I want the app to have access to the HTMLLoader class (and others marked "AIR" in the docs)?
Thanks

Yes, that's exactly right.
I assume the source of the confusion is that the "AIR only" classes are still in the flash.* package. In the early days there was some discussion back and forth about the appropriate place to put AIR only classes. In the end it was decided that they would be in the same top-level package as the Flash Player classes.
(To add to the confusion, there is also an air.* package. That package contains classes that are AIR-only but are not built-in to AIR. In other words, they're additional code libraries that make certain functionality easier, but they're written in ActionScript and run on top of AIR just like any ActionScript code you write, rather than being part of the AIR runtime.)

Explain about Data Types INT1, INT2, INT3, INT4 & NUMC

could anyone explain about the data types and give examples.

INT1: 1-byte integer between 0 and 255. The length is set to 3 places for this data type.
INT2: 2-byte integer between -32767 and 32767. Fields of this type should only be used for length fields. These long fields are positioned immediately in front of a long field (type LCHR, LRAW). With INSERT or UPDATE on the long field, the database interface enters the length which was actually used in the length field. The length is set to 5 places for this data type.
INT4: 4-byte integer between -2147483647 bis 2147483647. The length is set to 10 places for this data type.
NUMC: Long character field in which only numbers can be entered. The length of this field is limited to a maximum of 255 places.
Check this:
http://help.sap.com/saphelp_nw70/helpdata/EN/cf/21f2e5446011d189700000e8322d00/frameset.htm
Thanks...
Shambhu

About Chart types in IChart

hai,
Can some one plz explain me what is the need of going for Group Bar,Pie, Regression , Coustom Charts in IChart and
im trying to plot Custom chart type with Tag Query values but iam not getting that chart with the TagValues
plz can u tell with which query template we can plot the Custom Chart
Thanks &Regards,
Apsara

Hi Apsara
Barchart: Bar charts are used for comparing two or more values.
Grouped bar chart: It is another type of Bar chart, with data values ordered by tagname/dataset, then by observation.
Pie Chart: It is circular chart and it is divided into sectors.
To see these charts:
http://localhost/LighthammerCMS/Help/Applet_Reference_Details/Applet_Overview.htm
To get info about other charts see this thread:
Regarding information about Chats
For custom chart:
When there is need to represnt diffrent type of datas like line chart and bar type chart in the same graph use the custom chart. To get the chart type, Go to the pen details tab and change the pen type from default to required type.
Hope this helps you.....
Regards,
Kishore

About snapshot types

Similar Messages

Maybe you are looking for