About standalong DB system

dear all,
I want to install standalong db system.
I've installed oracle client software and CI on the host A, and oracle server software on the host B.
Now I install DBI on the host B with error.
[the error message|http://www.flickr.com/photos/24250547@N06/2919332890/]
Best regard!

Brian,
I hope you've followed the installation guide for doing the installation
you can find the inst guide for ERP, at service.sap.com/instguides >SAP Business suite > ERP > Installation > Select SAP ERP 6.0 SR3 - Installation docuement.
The error screen shows "sap/sapmnt doesn't exist"
have you verified, this is there or not..? sapmnt is the share point name for /usr/sap. if not done already, you can right click on sap folder, sharing and security, add the share name as sapmnt.
hope this helps,
Debasis.

Similar Messages

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

Need Info About Document Management System

Hi All,
I need information about Document Management system.
How it is linked with KM
Thanks
Arun

Hi Arun,
DMS is available in R/3 Systems as a individual module and can be linked with KM using DMS Connector for KM. Find the links below..
Check this out...
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/30/08a037b9e62417e10000009b38f889/frameset.htm">DMS</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=26682">Thread 1</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=235959">Thread 2</a>
Hope this helps.
Regards,
Venkat.

Gripe about the points system...

To whom it may concern,
I have a gripe about the points system used on the forums.Let me start by saying I like the general premise the points system offers but... I have noticed that I certain cases I will receive SEVERAL equally good, helpful, and valid replies to a post. My gripe is that when it comes time to award points I see a problem. In the above scenario AT LEAST one posts MUST get solved points while the others only get helpful points. I don't like this as oft times I believe EVERY answer deserves equal points. I would like to see the system at least allow for all posters to receive helpful points. I feel that in some cases this would keep things fair. Thank you.
Chris
G4 466 Digital Audio 1.5 gB RAM 30 GB HD Mac OS X (10.4.6) Pioneer DVR-111DBK

Thanks for the chance to vent!
Cheers,
Chris

Disappointment about the security system

Dear Apple,
Myself Gokulakrishnan, I am a new I Phone user, i am very very disappointment about your security system because of your siri application.
i have this problem i need a perfect explaination about this,
here i stated my problem,
I use passcode lock for the security purpose, but when i try to call my friend using siri before enter the passcode. the call is activated i am really shacked, how come the calling is going? if any one use my phone like this who will bare that charges?
i already check the options but i can find the way. please give the prapare solution or explanation.
i am witing for your reply.
thanks
krishnan

I'm not aware of any built in method to accomplish this. You'd have to come up with the custom way of doing it. You could put a web page in front of the main peoplebooks page that asks for login credentials and link that to PS somehow. Maybe use LDAP? In any case, it sounds messy and doesn't really seem like it's worth the investment. -Mike

Doubt about the distribution system

I have a doubt about the distribution system.
We have made a publication and download it and have it in our iPad. The client does not want tosell or that anyone other than its 15 commercial rest her ipad. How can we host it in those 15ipads?, Do I need any of the subscription programs adobe?
Thanks!

function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}Matthew Laun wrote:
Yeah... Someone did that yesterday with 70-something users all trying to get the updated folio at once, and it caused server outages. I've got a feeling we may modify the user agreement to limit this. Not saying for sure, just a word of caution.
Matthew
I don't understand this reply at all. Many of us have been using acrobat.com in exactly this fashion, and I've posted about it many times; including a full review:
http://forums.adobe.com/message/3853106#3853106
Did Adobe not see this coming? How would you limit the download amount without gutting the functionality? Would this apply to paid acrobat.com accounts as well?
I'm about to upgrade my acrobat.com account this week to host more than 1 folio. You need to clarify what you mean by 'modify the user agreement' ASAP.

The Problem about clearing the system cache

Hi, there!
I'm trying to draw a lot of image in iPhone programming.
I used [UIImage imageNamed].
but it doesn't clear immediately the system cache.
At last it occurs the out of memory.
So I thought using imageWithContentsOfFile, but it works very slowly.
Does anybody know how to clear the system cache?

Read Position.flx can execute much faster than 5 ms but as it reads a register that is updated every 5 ms on the board, it reads the same value multiple times.
To get around this problem there are two methods:
Buffered High-Speed-Capturing (HSC)
With buffered HSC the board stores a position value in it's onboard buffer each time a trigger occurrs on the axis' trigger input. HSC allows a trigger rate of about 2 kHz. That means, you can store a position value every 500 µs. Please refer to the HSC examples. You may have to look into the buffered breakpoint examples to learn how to use a buffer, as there doesn't seem to be a buffered HSC example available. Please note that you need an external trigger-signal (e. g. from a counter of a DAQ board). Please note that the amount of position data that you can acquire in a single shot is limited to about 16.000 values.
Buffered position measurement with additional plugin-board
If you don't have a device that allows you to generate a repetitive trigger signal as required in method 1.), you will have to use an additional board, e. g. a PCI-6601. This board provides four counter/timers. You could either use this board to generate the trigger signal or you could use it to do the position capturing itself. A PCI-6601 (or an M-Series board) provides can run a buffered position acquisition with a rate of several hundred kHz and with virtually no limitation to the amount of data to be stored. You could even route the encoder signals from your 7350 to the PCI-6601 by using an internal RTSI cable (no external wiring required).
I hope this helps,
Jochen Klier
National Instruments

Hi where to specify in XI about the target system

Hi!
I have a j2EE application(servlet) that receives XML file from XI. Where should i specify in XI about this?
Its urgent.
Your help is greatly rewarded.
Thanks

Just curious if anyone had any resources on where to start out on this.
We have a handheld phone system our material handlers use that is radio based. They were working fine for a while but for some reason we are getting a ton of static over the system now. I don't know much about radio systems but I'm always looking for something new to nerd out on and was curious if anyone had any suggestions on where to start to track down the source of this interference and figure out a way to fix it.
Any advice is greatly appreciated
This topic first appeared in the Spiceworks Community

About sap bw system Copy or backup ?(URGENT)

Hi gurus:
     Hi friends,I saw many theads about this subject,and I found many documents,But STILL I can't find the way to solve my problem.
     It is: How to export the objects I created in develop system to a harddisk, then import it to the QA system . Dev to QA with harddisk NOT online?
     And can I backup the whole bw system in the harddisk,and restore the bw system in the qa system istead ? how to backup the bw system ?
All useful reply will assign points
thx
chan

Hi Zegion,
I think the following may help you:
Purpose: Preserves logical system dependent objects for restoration in case of a system copy issue when a logical source system is deleted or deactivated. BW will auto re-generate a lot, but not these objects.
1.     Create on a development system like BWD, because the system is set as a development system in SCC4 and can create and export transports, and will include all objects. A dummy can be used for comparison if the system to be copied is production or test.
a.     If creating on another system, like BW test (BWT) or production, you must first open the system in
   i.     SE06 System Change option modifiable /BIC and /BI0
   ii.     SCC4 client settings set like in BW Development system (BWD)
   iii.     STMS in client 000 from BWD (domain controller)
            1.     Remove BWT from transport path
            2.     Setup new 2-system path BWT-BW? (BWS or virtual system). This creates a ZOUO transport layer, allowing creation of non-local/not $TMP package transports (see complex sample below)
2.     Go to RSA1-Admin workbench, Transport Connection
    a.     Select Object Types
    b.     Set for Grouping-Save for system copy
    c.     Set for Start manual collection
    d.     Set for Display List
3.     Drag and drop source system (select from select objects list and transfer selection) to collection window, example SCEM, SC0CLNT575, DEVCLNT100, SAP_DEMO. I recommend only doing one source system at a time for maximum flexibilityand because the R3 sources are very large.
    a.     Then execute collection Gather dependent objects
    b.     Select each category (mainly Transfer Rules, Transfer structure and InfoPackageswhatever is selected. On each header, right click and select transfer all below
    c.     Validate that there are no objects in the $TMP development package (DevClass). If it is, select the object and change package button to set to ZAWB. (Anything but $TMP (local))
    d.     NOTE- To reset transport connection, select anything on the left frame of the screen to refresh
4.     You are now ready to transportselect the truck icon to create
    a.     Call it Save for System Copy and the source system name
    b.     Go to SE09/SE10 and release it and tasks to the OS level
5.     Cleanup reset STMS and distribute, reset SCC4 and SE06 on BW0/Source BW system
6.     Verify RSA1- Tools mapping of source system names on target BW system (i.e. BWU) for source system of transport (i.e. SC0CLNT575).
7.     Verify RSA1- Modeling-Source system connection checks OK on target system
8.     Manually import transport in STMS Import Queue, extras, other requests, Add (to buffer). Import single with right click or partially loaded truck icon, select options as below:
9.     LAST STEP Validate import logs and activated objects. If there is an error, ensure the link to the new system is active, the RSA1-Tools-Mapping of source system names converts properly from say DEVCLNT100 to TSTCLNT200 (correct frame of reference) and reimport.
if it helpful reward point are appreciated

About assigning logical system name to client

Hi:
    the SAP landscape is:
    CRM DEV CR0 (CLIENT 200)        -
>    CRM PRD CR1 (CLIENT 800)
                  \|/                                                                        \|/
      ERP DEV MZ0 (CLIENT 200)      -
>   ERP PRD MZ1 (CLIENT 800)
   the crm dev is connected the erp dev and the crm prd is connected the erp prd.
   the CRM version is CRM2007 and the ERP version is ECC 6.
    My question is :
   Can the logical system name of the prd client 800 be same with the dev 200?
   Could you give me any advice?
THANKS.
Edited by: Xiaofeng Qiu on Jun 5, 2009 11:27 AM

Hi,
The logical system must be unique company-wide. In a production system, the logical system must not be changed.
Goto SCC4-->Double click on any client number. You will see logical system text. Select it & press f1 you will below information about logical system.
"The distribution of data between systems requires that each system in the network has a unique identification. The logical system is used for this purpose.
In the SAP System the client corresponds to a logical system.
When you maintain the logical system, note the following:
The logical system must be unique company-wide. It must not be used by any other system in the ALE integrated group. In a production system, the logical system must not be changed."
Thanks
Sushil

About careful update,system maintaning and dangerous packages to hold

-I want to know about which packages you usually prevent from updating?And how to do it?
-With what command i can delete everything the package i have installed?Including config files.
-Upgrading often is more convenient way for ArchLinux?
-If you reinstall or install Arch on other machines,have you written install guide or script for yourself,can you share it?
-Best aides for pacman(yaourt is a good one i know)

Paingiver wrote:-I want to know about which packages you usually prevent from updating?And how to do it?
-Upgrading often is more convenient way for ArchLinux?
I've been thinking more seriously about update frequencies recently. Especially considering the varying levels of brokenness I experience which takes quite some time to fix. This includes minor software compatibilities eg. firefox extensions. Or major functionality problems eg. broken suspend. Or worse, superhard to track show-stopping evil bugs.
The consensus seems to be update often and fix/downgrade as you go along.
http://wiki.archlinux.org/index.php/Downgrade_packages
However, if you want to fix stuff less often, you should update less often. Afterall, bugs introduced by bleeding edge packages might be fixed later on even newer ones. Updating less often allows you to see less of these buGs. Of course, this still doesn't solve the issue of experiencing "bugs" when you finally decide to update.
http://arm.nrk.cc/ (More info in the wiki)
To minimise this issue, I'm thinking of using the "Arch Roll back machine". The idea is that you update at a lower frequency of 3 months(variable) and when you finally do update, sync your system 1 week(variable) late. The idea is that by the time you sync, all the show-stoppers or bugs and their "solutions/fixes" are clearly spelt out in forums and the net. Thus, allowing you to fix stuff easily.
On the whole this results in a highly maintainable system which is as bleeding edge as you desire. If you need specific applications to be updated more frequently, just update those alone. Conversely, if you want your all your apps to be bleeding edge but not the kernel and other hardware stuff, you can blacklist those in pacman.conf.
Last edited by onguarde (2009-05-12 11:18:17)

Technical reference about the apple system preferences files

Hi Community,
is there a technical reference or at least a short description about apples system preferences files in Snow Leopard available? I don't mean the structure of references files as a whole but the meaning and functionality of a specific plist.
Thx & Bye Tom

Dave Sawyer wrote:
[com.apple.loginitems.plist]
Yes this was my thought too but it didn't drop the login items after I
threw > the loginitems.plist.
Some apps may automatically add themselves to this list, controlled by their
own preferences. But that is indeed the preference that controls that list.
I'm confused because after this experience I found a lot of tutorials, documentations and forum discussions which describes the loginwindow.plist as the responsible plist for the login items. My suspicion was that the loginitems.plist rebuild process take notice about the content of loginwindow.plist, which is in the root of the matter the same as in loginitems.plist.
But I couldn't answer this question competent and that's the reason why I'm searching for detailed informations about this "forgotten" loginitems.plist. Forgotten? Try to search for it. Its unbeleavable, 99% of the hits you get belongs to the loginwindow.plist and the description sounds very similar to the functionality of loginitems.plist. But maybe you're right and the applications try to put themselves back into the startup item list. But this doesn't answer the relation between this two plists.
Thy & Bye Tom

Partitioning External Hard Drive- questions about software & filing system

I just got my macbook and I want to use my older external hard drive to transfer data between the macbook and my PC desktop. I have a Maxtor OneTouch II 300gb with only one partition. I have about 80gb of data already on the Maxtor. So my two questions are . .
1. What is the best software (prefer freeware) to partition my Maxtor and keep the data I already have on it? Or is there a better way?
2. What is the best setup for the filing system for the partitions? NTFS for one and FAT32 for the other or something else? I want to be able to both read & write to the Maxtor from both the PC and Mac. Appreciate any help anyone can throw my way.
Macbook- Black model Mac OS X (10.4.6)

I'm not quite sure of what you mean by:
I would like to avoid
moving all the stuff from the external drive to the
mac, and then having to move it all back onto the
external drive.
But most external drive was formated using fat 32 which theoretically limit to 2 TB and file size limit to 4 GB. Just put a useless file from your pc, and connect your external to your MacBook ,and see if you can copy and or delete that file from your Mac.
You can also check your HD format on PC side by: go to my computer, right click the external HD icon and select properties, and it will shows you the hd was formatted with,...
If you mean you want to format to mac format "on the fly", they might be some utilities for that on Mac side, but I'm not aware of, but why you want to re-format it if the external work for both sides without getting new format, since format that using MAc extended journaled wight result unreadable on your PC side.
Good Luck

About E-mail system

hye
i'm about my final project....and i need to code of E-mail system,because my project about it,it's for intarnet system.....i mean, code about how can i send,open,write,delet...etc
plz help me if you don't mind
and thank you
all of you

Good luck, best wishes, etc. (You weren't expecting someone to post the code for that, were you?)

What about these file systems: ext4, reiserfs, and jfs?

I use ext3 as my file system now.
It said that these three file systems are better than ext3.
Ext4 is a successor to ext3. I think it must be better.
Reiserfs is very fast.
And jfs is effective(low usage of CPU).
Could anyone talk about the experiences of using these FSs?

EXT4: should mature into an awesome FS: faster than JFS, and more fault-tolerant. I'll try it one of these months.
XFS: nice. By design, it throws away files on an unclean mount, though. I never had FS corruption, but it would just up and get rid of critical files, like fstab, if I had just edited them and then had a nasty shutdown. Maybe it's a good /tmp FS?
RFS3: it used to be fast with all but large (hundreds of MB) files. IME, the maturing of the 2.6 CFQ and deadline schedulers took care of that. Fsck was never a strong point.
RFS4: what happens to a jet airplane if a bird gets sucked in an engine? It was kind of like that.
EXT3 (as a preface to JFS): from early 1998 up to late 2007, moving from 6.4 to 8.4 to 2x6.4+8.4 to 10 to 20 to 120GB, and well over 100 2000 and XP boxes serviced...I had significant corruption of NTFS FS or files all of three times, and none rendered the system unusable (it took a Win98 low-level FAT32 working trojan to do that...friggin' thing had a low threat level according to Semantic, but ate almost all my C: drive). Since moving to Linux in late '07, I've now had at least six partitions made FUBAR, and a handful that went to read-only at the slightest provocation (to give credit where it's due: I could get data off of those before wiping the partition). I've been working with itty computers lately, and EXT3 has been nothing but trouble (many hard-locks, kernel panics, app crashes while writing, etc.--a little hard on the FS). It seems to be fine on machines running all the time, that do their writing sparsely.
JFS: fast as EXT3, and seems to always recover on an unclean mount. On very slow hardware, it is definitely faster than EXT3...but I mean hardware competitive with Pentium MMXs, where EXT3 regularly maxes out the CPU. Cons? You'd best have your data backed up (but, if you trust any single copy of your data, you're asking for trouble, regardless of FS). It generally can bring your FS back to an old good state. But if not, it will happily throw files away, to make the FS itself clean quicker. So far the worst I've lost were Firefox cookies and other such goodies (never my session, luckily), but it's enough to show the possibilities.
Last edited by cerbie (2009-02-22 10:50:35)

About standalong DB system

Similar Messages

Maybe you are looking for