About statistics and dblink

dear gurus.
facts: bd 9204 (aix) and bd 11.1.0.6 (linux)
Every night i run a process that collect data from 9i database and update a table in 11g database. through dblink.
The statistics that i run every night in 9i database (before i run my 11g update process) will be useful for 11g database?
thanks a lot !!!

I went into the same situation
Every day I select data from remote data base (10g) and update a local table (10g) using these data coming through dblink.
Of course statistics or re-organisation (shrink for example) of remote table can influence your update in the local data base. I advise you to read the following link for a concrete situation I went in last month.
Why this update suddenly needs a locally partitioned index to run fast?
Regards
Mohamed Houri

Similar Messages

A strange error about cursor and dblink

My dbms:Oracle8i Enterprise Edition Release 8.1.7.4.0
I have a stored procedure, which inserts records from a remote database into a local table.
The 'insert' statement have similar pattern:
insert into table_a
select table_b.columns from table_b@dblink
where table_a.column in (select table_b.column from table_b@dblink);
commit;
There are about 100 'insert' statement in my procedure. But there is same error messages at the same
place when the procedure is run. The error messages:ora-01000:maximum open cursors exceeded,ora-02063:
preceding line from dblink. I have manually run the 'insert'statements before the error place and after the error place.
The before and after statements are both OK.
From google.com, I have learned that 'commit' will clear the implicit cursors from 'insert' statement. So I think
the problem is ora-02063. Again, keywords 'ora-01000 ora-02063'from google.com, I found 'alter session close
database link dblink' might solve the problem. I have add the 'alter session' statement after each 'commit' in
my procedure. Unfortunately, same error happened again at the same place.
I am puzzled. Would you like to give some advice? Thanks a lot!

Hello
Well, the best place to lookup error messages is here....
http://www.oracle.com/pls/db92/db92.homepage
It's also where all the rest of the database documentation is. As for this error, too many open cursors, as it suggests, one session has too many open. From the statement you are using to select the data, it seems like you are forming the statements dynamically, is this the case? If so, you're using cursors, and so there's a good chance you aren't closing them.
HTH

Error while executing procedure in TOAD which contains parameter and dblink

Hi all,
I am getting error while executing the following code in TOAD and APEX.
It contains parameter( start_date and end_date) and dblink(@TO_FUT).
When I hardcode the parameter values, It works fine.
When I dont give hardcoded values in the procedure, the error comes.
When I comment the lines whereever parameter comes, still the error comes.
I am not sure whether it is parameter issue or dblink issue or some other issue
Is anybody having any clue about this error?
Your help is very much appreciated.
The code:
CREATE OR REPLACE PROCEDURE PROC_ENR_ACC(START_DATE DATE,END_DATE DATE)
AS
BEGIN
EXECUTE IMMEDIATE 'TRUNCATE TABLE OUTPUT_TABLE';
INSERT INTO OUTPUT_TABLE
(FIRST_NAME ,LAST_NAME,HID ,EFF_DT,CID,PLAN, FLAG)
SELECT
TEMP1.FIRST_NAME,
TEMP1.LAST_NAME,
TEMP1.HID,
TEMP1.EFF_DT,
TEMP1.CID,
TEMP1.PLAN,
NVL((SELECT 'Y'
FROM FADMIN.MEMI_TABLE@TO_FUT MEMI
WHERE MEMI.MEME_CK = TEMP1.MEME_CK
AND MEMI.TXN_EFF_DT = TEMP1.EFF_DT
AND MEMI.PBP = TEMP1.PLAN
AND MEMI.MEMI_TXN_CD IN ('AC','RE')
AND MEMI.MEMI_SEQ_NO = (SELECT MAX (MI.MEMI_SEQ_NO)
FROM FADMIN.MEMI_TABLE@TO_FUT MI
WHERE MI.MEME_CK = MEMI.MEME_CK
AND MI.TXN_EFF_DT = MEMI.TXN_EFF_DT
AND MI.PBP = MEMI.PBP
AND MI.MEMI_TXN_CD IN ('AC','RE')
AND MI.MEMI_INTF_STS = 03 )),'N') AS FLAG
FROM
( SELECT
M1.FIRST_NAME ,
M1.LAST_NAME ,
M1.HID ,
M1.EFF_DT,
M1.CID,
M1.PLAN ,
(SELECT MEME.MEME_CK
FROM FADMIN.MEME_TABLE@TO_FUT MEME, FADMIN.GRGR_TABLE@TO_FUT GRGR
WHERE MEME.M_HIN = M1.HID
AND MEME.GRGR_CK = GRGR.GRGR_CK
AND GRGR.GRGR_ID = M1.GRGR_ID
)AS MEME_CK
FROM FADMIN.METR_TABLE@TO_FUT M1,
( SELECT M3.HID, M3.EFF_DT FROM FADMIN.METR_TABLE@TO_FUT M3
WHERE M3.TYPE IN ('60','61')
AND M3.REPLY IN ('117','118')
AND TRUNC (M3.METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
AND M3.SYIN_INST = (SELECT MAX (M4.SYIN_INST)
FROM FADMIN.METR_TABLE@TO_FUT M4
WHERE M4.HID = M3.HID
AND M4.TYPE IN ('60','61')
AND M4.REPLY IN ('117','118')
AND TRUNC (M4.EFF_DT) = TRUNC (M3.EFF_DT))
) TEMP
WHERE M1.TYPE IN ('60','61')
AND M1.REPLY ='011'
AND TRUNC (M1.METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
AND M1.SYIN_INST = (SELECT MAX (M2.SYIN_INST)
FROM FADMIN.METR_TABLE@TO_FUT M2
WHERE M2.HID = M1.HID
AND M2.TYPE IN ('60','61')
AND M2.REPLY ='011'
AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
AND M1.HID = TEMP.HID (+)
AND M1.EFF_DT = TEMP.EFF_DT (+)
AND TEMP.HID IS NULL
UNION
SELECT
M1.FIRST_NAME ,
M1.LAST_NAME ,
M1.HID ,
M1.EFF_DT,
M1.CID,
M1.PLAN ,
(SELECT MEME.MEME_CK
FROM FADMIN.MEME_TABLE@TO_FUT MEME, FADMIN.GRGR_TABLE@TO_FUT GRGR
WHERE MEME.M_HIN = M1.HID
AND MEME.GRGR_CK = GRGR.GRGR_CK
AND GRGR.GRGR_ID = M1.GRGR_ID
)AS MEME_CK
FROM FADMIN.METR_TABLE@TO_FUT M1
WHERE M1.TYPE IN ('60','61')
AND M1.REPLY IN ('016', '017', '022', '023')
AND TRUNC (M1.METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
AND M1.SYIN_INST = (SELECT MAX (M2.SYIN_INST)
FROM FADMIN.METR_TABLE@TO_FUT M2
WHERE M2.HID = M1.HID
AND M2.TYPE IN ('60','61')
AND M2.REPLY IN ('016', '017', '022', '023')
AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
)TEMP1 ;
END;
The error:
ORA-00918: column ambiguously defined
ORA-02063: preceding line from TO_FUT
ORA-06512: at "PROC_ENR_ACC", line 5
ORA-06512: at line 5

Okay
Here's the code formatted
CREATE OR REPLACE PROCEDURE PROC_ENR_ACC (START_DATE DATE, END_DATE DATE)
AS
BEGIN
   EXECUTE IMMEDIATE 'TRUNCATE TABLE OUTPUT_TABLE';
   INSERT INTO OUTPUT_TABLE (FIRST_NAME,
                             LAST_NAME,
                             HID,
                             EFF_DT,
                             CID,
                             PLAN,
                             FLAG)
   SELECT   TEMP1.FIRST_NAME,
            TEMP1.LAST_NAME,
            TEMP1.HID,
            TEMP1.EFF_DT,
            TEMP1.CID,
            TEMP1.PLAN,
            NVL (
                 (SELECT   'Y'
                  FROM   MEMI_TABLE MEMI
                  WHERE       MEMI.MEME_CK = TEMP1.MEME_CK
                  AND MEMI.TXN_EFF_DT = TEMP1.EFF_DT
                  AND MEMI.PBP = TEMP1.PLAN
                  AND MEMI.MEMI_TXN_CD IN ('AC', 'RE')
                  AND MEMI.MEMI_SEQ_NO = (SELECT   MAX (MI.MEMI_SEQ_NO)
                                          FROM   MEMI_TABLE MI
                                          WHERE   MI.MEME_CK = MEMI.MEME_CK
                                          AND MI.TXN_EFF_DT = MEMI.TXN_EFF_DT
                                          AND MI.PBP = MEMI.PBP
                                          AND MI.MEMI_TXN_CD IN ('AC', 'RE')
                                          AND MI.MEMI_INTF_STS = 03)
                  ),'N') FLAG
   FROM (SELECT   M1.FIRST_NAME,
                  M1.LAST_NAME,
                  M1.HID,
                  M1.EFF_DT,
                  M1.CID,
                  M1.PLAN,
                  (SELECT   MEME.MEME_CK
                   FROM   MEME_TABLE MEME, GRGR_TABLE GRGR
                   WHERE       MEME.M_HIN = M1.HID
                   AND MEME.GRGR_CK = GRGR.GRGR_CK
                   AND GRGR.GRGR_ID = M1.GRGR_ID) MEME_CK
         FROM   METR_TABLE M1,
                (SELECT   M3.HID, M3.EFF_DT
                 FROM   METR_TABLE M3
                 WHERE   M3.TYPE IN ('60', '61')
                 AND M3.REPLY IN ('117', '118')
                 AND TRUNC (M3.METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
                 AND M3.SYIN_INST = (SELECT   MAX (M4.SYIN_INST)
                                     FROM   METR_TABLE M4
                                     WHERE   M4.HID = M3.HID
                                     AND M4.TYPE IN ('60', '61')
                                     AND M4.REPLY IN ('117', '118')
                                     AND TRUNC (M4.EFF_DT) = TRUNC (M3.EFF_DT))
                 ) TEMP
         WHERE   M1.TYPE IN ('60', '61') AND M1.REPLY = '011'
         AND TRUNC (M1.METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
         AND M1.SYIN_INST = (SELECT   MAX (M2.SYIN_INST)
                             FROM   METR_TABLE M2
                             WHERE       M2.HID = M1.HID
                             AND M2.TYPE IN ('60', '61')
                             AND M2.REPLY = '011'
                             AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
        AND M1.HID = TEMP.HID(+)
        AND M1.EFF_DT = TEMP.EFF_DT(+)
        AND TEMP.HID IS NULL
        UNION
        SELECT   M1.FIRST_NAME,
                 M1.LAST_NAME,
                 M1.HID,
                 M1.EFF_DT,
                 M1.CID,
                 M1.PLAN,
                 (SELECT   MEME.MEME_CK
                  FROM   MEME_TABLE MEME, GRGR_TABLE GRGR
                  WHERE       MEME.M_HIN = M1.HID
                  AND MEME.GRGR_CK = GRGR.GRGR_CK
                  AND GRGR.GRGR_ID = M1.GRGR_ID) MEME_CK
        FROM   METR_TABLE M1
        WHERE   M1.TYPE IN ('60', '61')
        AND M1.REPLY IN ('016', '017', '022', '023')
        AND TRUNC (M1.METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
        AND M1.SYIN_INST = (SELECT   MAX (M2.SYIN_INST)
                            FROM   METR_TABLE M2
                            WHERE   M2.HID = M1.HID
                            AND M2.TYPE IN ('60', '61')
                            AND M2.REPLY IN ('016', '017', '022', '023')
                            AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
        ) TEMP1;
END;
/When posting code if you put {noformat}{noformat} (with the curly brackets and in lower case) above and below it you can preserve formatting.
To your original question...
Is the link name supposed to be variable?
What do you mean by 'hard coding' the values, do you mean in the procedure itself so you'd actually PROC_ENR_ACC();?
What happens when you run this?DECLARE
start_date DATE;
end_date DATE;
BEGIN
start_date := '01-JAN-2009';
end_date := '01-FEB-2009';
PROC_ENR_ACC(start_date, end_date);
END;
I need to know exactly how to recreate your error...
Cheers
Ben
http://www.munkyben.wordpress.com
+Don't forget to mark replies helpful or correct+ ;)

Need details about Statistics - Internals

Hi,
I am aware of Statistics and how it helps CBO. I would like to know more about internals of Statistics, I know Oracle
maintains certain details in the below views, also in Columns and Partitions Metadata views.
DBA_TABLES
DBA_TAB_STATISTICS
DBA_INDEXES
DBA_IND_STATISTICS
I know it maintains NUM_ROWS and LAST_ANALYZED details in DBA_TABLES and DBA_INDEXES.
Please provide details about the data being maintained in other views.
I'm aware of Histograms, it maintains actual details about Data Distribution. I would like to know how the Normal Statistics differs from Histograms,
it uses the same parameter method_opt with different values.

845956 wrote:
I know it maintains NUM_ROWS and LAST_ANALYZED details in DBA_TABLES and DBA_INDEXES.
It actually maintains much more than just the NUM_ROWS and others you specified.
DBA_TABLES
DBA_TAB_STATISTICS
DBA_INDEXES
DBA_IND_STATISTICS
Regards,
P.

Differences between DB Statistics and BW Statistics

Hi,
I have a doubt what is the exact difference of BW Statistics and DB Stattistics and where exactly these are useful.
Please clear my doubt.
Thanks in advance
venkat
[email protected]

Hi Venkat,
DB statistics are used by the optimizer for retrieving data on database level.
cf. http://help.sap.com/saphelp_nw04/helpdata/en/19/f832ac5d4611d4aa1500a0c9430730/content.htm
BW statistics are about the usage of different objects (queries, InfoCubes, ...) in your system
cf. http://help.sap.com/saphelp_nw04/helpdata/en/f2/e81c3b85e6e939e10000000a11402f/content.htm
Best regards,
Björn
Message was edited by: Björn Grahlher

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

My homepage will load about 30% and then i'm dead in the water. when i close firefox it appears to close but when i try to reopen it tells me that it's already running. started with beta 6 i deleated and loaded ver 5 no change

when i start firefox, everything starts normal then my homepage (igoogle) starts to load, gets to about 30% and stops. from there i can click on links or bookmark and a new tab will open but no page will load. i can't get anywhere. then when i close firefox it appears to close normally but when i try to reopen firefox i get a message that firefox is still running but not responding and the only way to shut it down is to reboot. when it first occured i was running beta 6 (since it became available, i also used beta 4 & beta 5) i then uninstalled beta 6 and downloaded and installed ver 5 same problem. i then did a system restore to a time before the problem.. no luck. i'm not sure what to try next. IE & chrome both work fine

I'm in exactly the same boat - dead at blue screen, only option is to salvage using target mode.
I don't currently have access to another Mac to do target mode. I was planning to buy a new Mac this fall anyway, though. 2 questions in preparation for that purchase:
1) Is there anything I can do before buying a new Mac to make the salvage process more successful? ie, should I spend the time and money going to the genius bar to have them help me get from totally crippled to partially crippled? (As for expertise, I'm a proficient consumer-grade user, but Apple Support walked me through the safe-boot process, etc.)
2) Is Apple going to provide 10.5 once it is released to people who buy a new Mac in these 6 weeks pre-release?
Thanks for your help,
Bailey

Firefox will open 4 or 5 tabs fine, but then will not load any further websites after those first 4 or 5, or allow you to refresh one of those first tabs -- including about:config and the addon page

Firefox 5 worked fine. I installed Firefox 7, and when I ran it, tabs would just say "connecting to..." and hang. Restarting did not help. Websites open fine in IE and Chrome. Disabled all firewalls and antivirus, did not help. Uninstalled and reinstalled Firefox 5, everything worked fine again. This was using Vista 64-bit.
Upgraded to Windows 7, uninstalled Firefox 5, installed Firefox 7, had same problem. Uninstalled Firefox 7 completely (including the profile information, I saved that information in another folder), restarted computer, and installed Firefox 7 using a completely clean profile. Did not install any add-ons, checked to make sure all plug-ins were up-to-date, and updated plugins.
Now when I start Firefox, I can load 3 or 4 or 5 tabs fine -- after those first few tabs are open, I cannot open or refresh any other tabs -- including about:config and the add-on manager -- I have to restart Firefox. The hangup doesn't appear to be related to what websites I am attempting to open, but it looks like the number is the problem. I have run through all of the FAQ procedures, including changing the max number of network connections to 48, and the problem does not seem to go away.
As a side note, I had this same problem when I tried to go from version 5 to version 6 as well. Version 5 is the most recent version that worked on my system.

Can you try Aurora - download it from http://www.mozilla.org/en-US/firefox/channel/
And let us know how it works.

Each time I open my computer, I get a full screen about Firefox and a toolbar that needs a yes or no answer. How do I get rid of this?

I used to be able to press 1 button to get to my Google Home page, but now that I have downloaded the latest version of Mozilla Firefox, the "home page" is now information about Firefox and at the top of my computer, there is a question about security that needs me to say 'no' each time. I do not want to go through these steps every time I start my system.

See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

I'm trying to update my itunes to 10.5.2 but it freezes on about 55% and i can't sync my iphone 4s untill i updates... PLEASE HELP!

i'm trying to update my itunes to 10.5.2 but it freezes on about 55% and i can't sync my iphone 4s untill i updates... PLEASE HELP!

Have you disabled your virus protection?

My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody same..

My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody with similar problem....

Hm... Try this----> http://support.apple.com/kb/ht1808 or http://osxdaily.com/2010/12/04/ipad-dfu-mode/

Best avenue to file complaints about bill and have them resolved

I have been a customer since before 2005 and went with Ntelos in November, I called the night I was at Ntelos to ask Verizon what my contract buy outs were and I was given the prices. The representative tried to offer me whatever promotions she could offer (there wasn't many) and I declined service (there she should have took the initiative to ask about disconnecting). Since my bf opted to keep his number his phone disconnected automatically. I was told my Verizon phone would cycle off within 24 - 48 hours by the Ntelos rep. That was not the case so I called verizon to ensure my phone would disconnect and they told it would at the end of the billing cycle (december 20) which makes sense. I understand I would be responsible for the November - December. Anyways, December 20th rolls around and mind you I've called already to ensure it will take place and it doesn't. I phone in and come to find out the person who took my orders didn't complete the disconnection and now I have to wait until January 20th for it to cycle off and I can finally pay my bill! Well get this in my November - December bill they've charged me $51 for Monthly access (I have a work discount) and $49.99 for insurance and smartphone access for 12/21 - 1/20 and won't refund my $51 as they say that I called out on the phone. I turned the phone on and had voicemails that I think I checked around the time period that they are mentioning (1 day) and that data was used (1 day) I had no outbound calls after December 11th my birthday. Because there are no comments in my account (that I specifically asked them to make) my phone should have been disconnected when I had called in the first of December... really!?! The phone should have been turned off regardless and it was one day out of 30 seriously? I mean the phone has been turned off this whole time and literally only checked to make sure Verizon did their job. I CAN'T HELP IT YOU DON'T KNOW HOW TO DO YOUR JOB, I PUT THE EFFORT IN MULTIPLE TIMES TO LET YOU KNOW MY PHONE NEEDED TO BE DISCONNECTED YOU SHOULD HAVE KEPT RECORD OF IT!!! What really heats me up is that I was told a supervisor would give me a call back after they got out of a meeting and I have not rec'd a call back yet. VERIZON Reps/Supervisors your customers are the reason why you have get a paycheck, I suggest you start treating them a little better. You can't seriously tell me giving me back my $51 for service I DID NOT USE (except according to you for one day you can't even give me details about?) is really going to hurt your pockets. I've been jerked around by your reps for the last 2 months as one told me my contracts were up in January and I shouldn't' be charged for disconnection fees at all, she credited me those termination fees but they later got rejected (after she said her supervisor approved while I was on hold) and NO ONE HAD THE COURTESY TO NOTIFY ME!
I've worked in customer service before and I'll be first to tell you that your reps are not trained very well and you have horrible ethic! You should not charge your customers for an error that was your fault; especially since it was your reps that I asked specifically to note my account and didn't (this isn't my first rodeo with you all, it should be standard procedure to give your reps time to comment before throwing them into another phone call). I'm not doing this for my health here, that $51 could buy diapers and baby food for my daughter and you are crazy if you think I'm going to let it slip through my fingers to line your pockets. I will keep escalating it until you do something about it and I don't care that you already gave me an inconvenience credit I deserve that and my $51 so don't try to justify it that way! This has been way more than an inconvenience, so don't worry I'll inconvenience you as well!
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

With my new provider I am only using the chat function to settle anything with them so I can save the conversations I've had with them (not that I've had any issues thus far). It should be standard procedure for them to comment your account while they are on the phone with you before hanging up. I should have been annoying and asked them to read back their comments (hindsight ugh!). I'm sorry that you are having to deal with this as well, just know you are not the only one receiving horrible customer service. I'll share with you what I wrote on their Facebook page. They really should take some accountability for their actions and have better follow up on resolving issues (or train their representatives better). I can't stand having to talk to another person time and time again explaining the same thing i just explained to 3 people before them.
Almost immediately, I received some attention after posting this:
Dear Verizon,
I am appalled, especially after reading your credo, that you are refusing to credit back money that is owed to me because your representatives didn't take the necessary time that they should have to comment (after I specifically asked) in my account after I diligently called in multiple times to ensure that my disconnection took place when it was scheduled to and was told that it would (an ongoing issue since the beginning of December). Come to find out that the representatives I spoke with prior to December 20th didn't do their jobs correctly by not entering the disconnection orders in. "Verizon Credo- a set of principles that describes our culture of integrity, respect, performance excellence and accountability. The Credo is a blueprint that directs us to live up to the highest standards possible when serving our customers, shareowners, communities and each other." Let me school you on something here because it appears that you just put that mission statement up on your website 'cause it sounds good, you certainly do not follow through! Accountability: Noun - the quality or state of being accountable; especially an obligation or willingness to accept responsibility or to account for one's actions (i.e. public officials lacking accountability). It doesn't matter that you cannot find any proof in my statements it doesn't change the fact that it happened and I am not a liar. I seriously wouldn't exhaust this must effort had I been lying. I'll take this a step further and reference your statement "we focus outward on the customer, not inward. We make it easy for customers to do business with us, by listening, anticipating and responding to their needs." First of all, when I made my initial call to you all asking what my contract buyout prices were and your rep tried to offer me promotions (or lack there of) to keep me as a customer and I declined she should have "anticipated" my need for disconnection. I shouldn't have had to jump through so many hoops to get my service disconnected from you all and pay my final bill. It's not my fault that your representatives weren't trained well enough to correctly put through disconnection orders. Based on my interactions with your customer service I could see where people would disconnect their services regularly!!!!! You are not making it easy for me to severe ties with you and conduct BUSINESS and you are not responding to my NEEDS. I think you forget that I could be a potential customer in the future. If it's one thing I learned from my Communications Degree is that negative feedback will reach more consumers vs. positive feedback of a company and how they handle their business. I have 1,000 plus facebook friends and twitter followers so I'm pretty sure my negative experience could reach quite a few people! You say you have integrity? How is it moral uprightness to charge me for a whole month of service (regardless if the phone was turned on once) for a billing period that shouldn't have existed if your customer service reps did their job correctly? I suggest that you all take a good look at the way you are treating your current customers because we are the reason you get a paycheck! You should make your customers a priority especially if they've been with you for 10 + years regardless if they are disconnecting service or not! How about following through, taking ACCOUNTABILITY and having that supervisor representative call me back from my phone conversation last night like I am a priority (how every customer should be treated) and helping me get the money that I am owed, regardless if the phone had been turned on for a short period (your rep couldn't even tell me what numbers I supposedly called - exactly the phone has been off since December 20th if not before unless turned on to confirm disconnection)! Oh but let me guess did you all forget to put that in my account comments as well? Probably like there is no mention of the formal complaint I filed against some of your representatives that there was supposedly no ticket number for. I thought I was going to regret leaving Verizon for another provider but it turns out that I only wish I would have left sooner and actually gone to a authorized dealer/ Verizon Store to process my disconnection because your customer service line is a joke!

We have always used one iTunes account and I want to crate a new account for my daughter. What is the best way to go about this and will she need to download free apps again?

We have always used one iTunes account and I want to crate a new account for my daughter. What is the best way to go about this and will she need to download free apps again?

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Hi, I've just purchased and installed an upgrade from Lightroom 4 to 5. It doesn't seem to handle raw files authored with a new Nikon D750 camera. I spoke to the sales rep about this and he gave me a link to the 8.6 DNG converter page with instructions

Hi, I've just purchased and installed an upgrade from Lightroom 4 to 5. It doesn't seem to handle raw files authored with a new Nikon D750 camera. I spoke to the sales rep about this and he gave me a link to the 8.6 DNG converter page with instructions to download. 8.6 only works with Mac OS 10.7-10.9, according to the page. I'm running Yosemite, Mac 10.10. Please can you tell me my options? Lightroom 4 worked beautifully with my older cameras' raw files so I would like to continue using the application. What should I do? How soon will Lightroom 5 be able to deal with raw files from a D750. Many thanks, Adam.

Until the next version of Lightroom is released, you need to use the DNG Converter version 8.7RC to convert your RAW photos to DNG and then import the DNGs into Lightroom.

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

About statistics and dblink

Similar Messages

Maybe you are looking for