About stocktype, stockcat, Indicator: Valuation of Special Stock

Hello Gurus,
        please show me where can I get values and values' meaning for stocktype, stockcat, Indicator: Valuation of Special Stock?
Many thanks,
Frank

HI
data comes from related data  0FRE_STKEXC data source; 0FRE_ANA_STCKEXC_1... InfoCube: 0FRE_C04 / 0FRE_C24
0FRE_C04 retrieves the F&R relevant master data from InfoObject 0MAT_PLANT.
0FRE_C24 (new as of release 7.0.3) is similar to 0FRE_C04, but uses DSO (DataStore Object) 0RT_DS01 instead of 0MAT_PLANT to retrieve the following F&R relevant master data:
hope it helpfull...
thx vijju

Similar Messages

  • Fill field Valuation of Special Stock (EKPO-KZBWS) BAPI_CONTRACT_CREATE

    Can any body help with this, I need to fill the field Valuation of Special Stock (EKPO-KZBWS) in the BAPI_CONTRACT_CREATE.

    OK

  • Valuation of special Stock

    Hi Friends,
    Can anyone explain briefly about the sales order stock valuated by the moving average and standard price .  How the system response for these prices ?  difference specially for sales order stock
    Thanks & Regards,
    Renuga.A

    Hi,
    Price control depends S or V on ur bussiness requirement but you can go for V.For more check the links:
    http://help.sap.com/saphelp_470/helpdata/en/90/ba6cba446711d189420000e829fbbd/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/90/ba6cc7446711d189420000e829fbbd/content.htm
    Regards,
    Biju K

  • Special stock valuation

    Dear Experts,
    Can any one tell me whre we will do project stock valuation .
    and how the table QBEW-LBWST will get updated
    Thanks
    Bhaskar

    Dear Bhaskar,
    Materials with project stock and standard price price control are valuated as per the following strategy is HARDCODED in the system:
    1. looks into QBEW if any GR/IR has already taken place.
    2. runs user Exit COPCP002 / EXIT_SAPLCK36_001 which is designed
       exclusively for valuated sales order stock.
    3. looks for a marked sales order cost estimate.
    4. looks for planned costs of a production order (preliminary costing).
    5. CU50 if configurable material (only for project stock)
    6. standard price from MBEW (standard cost estimate)
    The first time a goods movement is carried out the system will go through this strategies until it can find a valid price, and then will write an entry in QBEW. The successful strategy number is also written to field LBWST. From then on, the price from these tables will be used for valuating the special stock in every other goods movement.
    You can find this part of the coding in Function Module CK36_STANDARD_PRICE_GET > Form PRICE_STRATEGY_NEW.
    Note 520000 which provides more information about this logic.
    Best Regards,
    Antje

  • Infrastructure for special stock data

    DeDear Experts,
    Is there any infrastructure for stock detail where special stock data is available like sales order stock and project stock.
    Free stock is available in S032 info structure, I want the same for special stock.
    Please suggest me in this regards as I need to develop the stock report in alternative unit of measure.
    Regards,
    vgl.

    As per OSS note 581240 only certain special stocks are updated in info structures S031-S039:
    The following special stocks are always updated:
    Special stock 'O': Stock of material provided to vendor
    Special stock 'W': Consignment stock at customer
    Special stock 'V': Returnable packaging stock at customer
    The following are never updated:
    Special Stock 'K': Vendor consignment stock
    Special stock 'M': Returnable transport packaging
    The following stocks are updated DEPENDING ON YOUR VALUATION TYPE (Special Stock Valuation indicator):
    Special stock 'E': Sales order stock
    Special stock 'Q': Project stock

  • Special stock T for valuated SIT

    Hi Experts
    The valuated SIT is referred with special stock indicstor T.
    But i am unable see the special stock indicator in MB52 as like consignment stock/subcontractor stock.
    Please give any clue.
    thanks
    ramSiva

    Hello,
    you can also see special stock T in MMBE. It´s necessary to add field KASIT to one of the Display version (you can customize it in path Material management --> Inventory Management --> Reporting --> Define Stock List Display --> Rules for display of stock balances).
    You can see final result in attached screen shot.
    To resume. You can analyze T special stock in:
    MBBS
    MB5SIT
    MMBE (customizing Display version with new stock type).
    Best regards.

  • Special Stock indicator Setting in SD

    Hi all,
    I had created the normal delivery Sales Order. But when i'm trying to make delivery against the Sales Order. It gaves me error, Coz some how the Delivery item have Special Stock indicator set to 'E'.
    from where i can remove this setting.
    Pls note I had Checked the SO Item Category, Schedule line, Account assignment cateogry and the Delivery item Category, but couldnt trace out this Setting.
    If any one knew about it, then let me know.
    Regards,
    S Anand.

    Dear Sheo singh
    Special stock indicator is set only in Item category with regard to SD that is in VOV7
    You can also check in the requirement class details in OVZG
    For this you need to find out what is requirement type maintained in your sales order in VA02 procuremet tab
    In OVZH you need to see what is the requirement class assigned to your  requirement type
    In OVZG for your requirement class details you can see whether any special stock indicator is maintained
    But here also the value flows from what is maintained in VOV7
    Hope this information helps you
    Regards
    Raja

  • Customer Stock (Special stock indicator B and item category C)

    Dear All,
    I am mapping my service center scenario in sap,
    We are consumer product manufacturer when material is wthin warranty or outside warranty, for any defects or replacement customer come with defective material to my service center.
    When i will post receipt for the material it should be the CUSTOMER stock,
    For that i need detailed information about special stock indicator B and movement type combination.
    also item category C in purchasing documents.
    plz tell me that i can directly configure these things in sap or B and C both are standard provided by sap.
    I am using 4.7 in my system B and C both are not available.

    Hi
    In the Standard Sytem these are the special Stock Indicators
    E     Orders on hand
    K     Consignment (vendor)
    M     Ret.trans.pkg vendor
    O     Parts prov. vendor
    P     Pipeline material
    Q     Project stock
    V     Ret. pkg w. customer
    W     Consignment (cust.)
    Y     Shipping unit (whse)
    I have not found B - Special Stock indicator.
    You can use Accotunt assignment Category D  - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
    Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
    Thanks & Regards
    Kishore
    Thanks & Regards
    Kishore

  • Special stock indicator in requirement class

    Hi
    While trying to create a new requirement class or while changing an existing requirement class, the special stock indicator is always greyed out. Can anyone suggest why?
    Thanks.

    You need to talk to your CO consultant and make sure that the account assingment settings are done for valuation, only after the special stock indicator can be activated

  • Project Special stock indicator PROJ-KZBWS

    Hi,
    I created a project with TCODE CJ20N.
    The project's valuation indicator(KZBWS) is assuming "M" and this field was not visible at moment of creation,
    Is there any config  to define "A" ?
    Regards,
    Menoita

    Hello Riten,
    You can control this in your Item Cat (use VOV7) in Special Stock in Business Data section.
    Hope it can assist you.
    Thanks & Regards
    JP

  • Report by month with Valuated stock and special stock by storage location

    Dear All,
    I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
    I try it with MCBE tcode, but i only get  "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
    Does anyone know how can solve it?
    Thanks in advance,
    Sebastiá

    Hi,
    Use MC.9 T.code.
    click on "switch drilldown" and select storage location.
    Regards
    Hari

  • BAPI_ALM_ORDER_MAINTAIN not Updating Special stock indicator field

    Hi Experts
                  I am using BAPI_ALM_ORDER_MAINTAIN to create and  then update a Customer Service Order. When am trying to update the Special stock indicator field in the Components Tab(of IW32) through BAPI, its not doing so, and no error is thrown as well.
    The required qty and the batch field in the components tab get updated which ensures that the logic am using is the correct one.
    Please let me know if anyone has faced such a situation before. Any workaround(some other FM) to update this field is also welcome.
    Points guaranteed.
    Thanks
    Kulpreet Singh.

    Hi!
    BAPI_ALM_ORDER_MAINTAIN is only updating a field, when you set the update flag also in CHANGE method.
    So if you are maintainig the IT_COMPONENT table, you have to put an 'X' into the same field in the IT_COMPONENT_UP table also.
    And of course don't forget to commit the modification.
    Regards
    Tamá

  • Change component level special stock indicator for Purchase Ord-through CIF

    Hai,
    my requirement is to change the the spoecial stock indicator at the component level for the PO .
    The purchase reqqusition is available in APO system.At the time converiosn to PO, the PO will get created in R/3 through CIF.
    When the Purchase Order is getting saved in R/3 then I need to check the component level Special stock indicator(SOBKZ) & I need change its value.
    I am currently using the user exit 'EXIT_SAPLCPUR_001' to change the same.in this user exit, I am changing the component level SOBKZ in the table IT_INPUT & I am also setting X in IT_INPUTX table.
    But the changes are not reflecting in the newly created PO.It always shows the value 'E' for SOBKZ.
    can any one tell me is this the right user exit to change the above value? if yes please expalin me in rdetail on how to change this.
    Thanks,
    Bhaskar.

    Hai Saurabh,
    I have tried changing the CP_POSITION-SOBKZ field in the user exit EXIT_SAPLMEPI_006.This one changes the SOBKZ of the item of PO i.e, the change reflects in EKPO table.
    What I am looking for is to change the Component level SOBKZ of the ITEM of the PO.The change reflects in RESB-sobkz table.
    I think,  In the User exit EXIT_SAPLCPUR_001, the field IT_INPUT-SP_STK_IND is meant for this.But this is not working.
    Please inform me how the RESB-SOBKZ can be changed?
    Thanks,
    Bhaskar

  • Special stock indicator for the sales order (VBAP-SOBKZ=)

    Dear All,
    I am getting a warning message while making an initial entry of stock with Mov.Typ : 561 and Special Stock Indicator (E), i.e., "The special stock indicator for the sales order (VBAP-SOBKZ=)is different from the special stock indicator in the goods movement.
    The system is allowing to post the initial entry of goods but when I am trying to do a PGI, it is throwing an error saying that, deficit of stock in the specific storage location.
    Can anybody help me out with this problem ?
    Reward points shall be awarded.
    Rgds,
    Indrajit Dey

    Hi Indrajit,
    Please post the stock with Special Stock Indicator (E), and againest sales order and item.
    Go to MB1C transaction enter Movement type,Plant and special stock indicator E.
    After that you enter Sales order Number and Item then save the document.
    Noe you try to do PGI,
    I hope it will help you,
    Regards,
    Murali.

  • Special stock indicator for component in process order

    Hi,
    There is a field in process order where we can maintain special stock indicator for component.
    In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
    Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
    Q - where to define this master data. I could not see such fields in BOM?
    regards,
    Mohit

    Hi Sunderesan,
    Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
    My requirement is that system should propose '3' in special stock indicator in process order.
    Request to look into this.
    regards,
    Mohit

Maybe you are looking for

  • Back to My Mac and Vonage Linksys RTP 300 Router

    I am trying to get Back to My Mac to work with my iMac running 10.6.2 and my PowerBook G4 running 10.5. But I have a problem with my router... I use the Vonage (RTP-300) and it is not one of the supported routers on the list. I basically have the sam

  • What will be Apple's response to Kindle's WhisperCast?

    I am the IT Director at a school in Chicago and we recently went to iPads in the classroom.  Since they are the property of the individual, we have a hard time telling the students what can and can not be on the device.  However, it seems like Kindle

  • Scanning batches of photos as one time

    Is there an easy way to scan a batch of photos on the flatbed of a scanner and have the software recognize them as distinct images?  And then save them that way?

  • What is the best way to get a ratio between two waveforms?

    I'm reading in multiple channels on a PCI 6143 and I want to get the Voltage Standing Wave Ratio (VSWR) between two channels. Right now I have a choice of outputting a 2D DBL or 1D waveform from the daqmx read vi. With the 2D DBL I can use a For Loop

  • JDev 1013 BUG? EJB, CMR, DTO and session facade.

    I've created two CMP Entity EJB's, CourseEJB and PupilEJB, and defined a M:N relationship between them. A course has many pupils and vice versa. Each bean has only two attributes, id (Long, part of PK) and name (String) for simplicity. 1. Generated D