About Subnet with RV042

Good afternoon friends...
I have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 additionals workstations) and some times I see IP conflict message in my current workstations.
I had read about SUBNET like response about my problem, but I'm not sure about that and how to make subnet with my RV042.
Can you give me a idea about that...?
Thank you very much.
Rafael.

Mr. Thomas, sorry for the inconvenience...
I'm making test, with my new subnet (192.168.94.1; subnet mask 255.255.255.0) my workstations inside from new subnet has internet, mail, local system, etc... but I can't browse shared folder in workstation placed in subnet... and I can't shared folder from workstation placed in subnet to workstation placed in principal net)
I had set in local connection adapter (workstation placed in new subnet):
IP Address: 192.168.94.3
Subnet mask: 255.255.255.0
Default gateway: 192.168.94.1 (I made test with 192.168.95.1, but I get same problem)
Thanks for your patience...
Rafael

Similar Messages

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Computer won't start up after recent version of mountain lion. My power Mac was running extmely slow this morning, so i shut down to restart. As it is starting the screen goes black, says something about debugging with the word panic in parentheses. was

I upgraded to latest version of mountain lion yesterday, this morning my power Mac was running extremely slowly (while typing, had to wait a second or two for words to appear), I shut down to see if problem would clear up. When starting up, screen went black with programming jargon, something about debugging with the word panic in parentheses. Screen then goes back to gray, says Mac encountered a problem and has to restart once I push a key. Apple logo comes on gray screen, icon keeps circling and nothing happens. This has happened three times in a row after shutting down and trying to restart. Any thoughts?

When verifying disk, said could not repair disk, back up as many files as possible then re format disk. Computer now doing Internet recovery. Should I. Do the following in this order
1 restore from back up on time machine
2 re install osx
These are the options coming up on osx utilities window

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lighroom 5 if I upgrade from Snow Leopard to Lion?

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.

Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine.

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....

Question about function with in parameters

Hello,
I have a question about functions with in-parameters. In the HR schema, I need to get the minimum salary of the job_id that is mentioned as an in-parameter.
this is what I am thinking but I dont know if it's correct or not or what should I do next!
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
begin
SELECT min_salary INTO min_sal
FROM jobs
where job_id = get_minimum_salary(xy);
RETURN i_job_id;
end get_minimum_salary;
thanks in advance
EDIT
Thanks for your help all.
Is it possible to add that if the i_job_id which is the in type parameter does not have a minimum salary then use the following function to register an error:
create or replace procedure insert_error (i_error_code in number,
i_error_message in varchar2)
as
begin
insert into error_table (error_user, error_date, error_code, error_message)
values (user,sysdate,i_error_code,i_error_message);
end insert_error;
This function is basically to say that an error has occured and to register that error, at the same time I need to print out the error using the dbms_out.put_line.
Any ideas of how to do that?
Thanks again
Edited by: Latvian83 on Jun 1, 2011 5:14 AM

HI
I have made little bit changes in ur code. try this
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
v_Min_sal jobs.salary%type=0;---- Variable declaration
begin
SELECT min_salary INTO v_ min_sal
FROM jobs
where job_id = i_job_id;
RETURN v_Min_sal;
end get_minimum_salary;
Regards
Srikkanth.M

About bapi with help of example

about bapi with help of example plz dont give links.

With the correct customizing (order types, etc...) the following BAPI will create a PM order for you.
Naturally the master data is also required to be created in SAP (Technical objects, Work places, etc...)
*& Report Z_BAPI_ALM_ORDER_MAINTAIN_TEST                              *
REPORT z_bapi_alm_order_maintain_test.
TABLES: mara,
        resb.                               "anyagfoglalások táblája
DATA: it_methods LIKE STANDARD TABLE OF bapi_alm_order_method,
      wa_methods LIKE LINE OF it_methods.
DATA: it_header LIKE STANDARD TABLE OF bapi_alm_order_headers_i,
      wa_header LIKE LINE OF it_header.
DATA: it_operation LIKE STANDARD TABLE OF bapi_alm_order_operation,
      wa_operation LIKE LINE OF it_operation.
DATA: it_component LIKE STANDARD TABLE OF bapi_alm_order_component,
      wa_component LIKE LINE OF it_component.
DATA: it_component_up LIKE
                      STANDARD TABLE OF bapi_alm_order_component_up,
      wa_component_up LIKE LINE OF it_component_up.
DATA: et_numbers LIKE STANDARD TABLE OF bapi_alm_numbers,
      wa_numbers LIKE LINE OF et_numbers.
DATA: et_extension_in LIKE STANDARD TABLE OF bapiparex,
      wa_extension_in LIKE LINE OF et_extension_in.
DATA: et_return LIKE STANDARD TABLE OF bapiret2,
      wa_return LIKE LINE OF et_return.
DATA: it_resb LIKE STANDARD TABLE OF resb,
      wa_resb LIKE LINE OF it_resb.
DATA: lv_commit TYPE i.
PARAMETERS: p_test AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: p_create RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 4(30) text-rcr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: p_change RADIOBUTTON GROUP rg1.
SELECTION-SCREEN COMMENT 4(30) text-rch.
PARAMETERS: p_aufnr LIKE aufk-aufnr MEMORY ID anr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon AS CHECKBOX DEFAULT 'X'.
PARAMETERS: p_partn AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION.
IF p_aufnr IS INITIAL.
    MOVE '007321002921' TO p_aufnr.
ENDIF.
PERFORM it_methods_fill.
PERFORM it_header_fill.
PERFORM it_operation_fill.
IF p_compon = 'X'.
    PERFORM it_component_fill.
ENDIF.
REFRESH et_numbers.
break zaladev.
CALL FUNCTION 'Z_BAPI_ALM_ORDER_MAINTAIN'
    TABLES
      it_methods             = it_methods
      it_header              = it_header
*   IT_HEADER_UP           =
*   IT_HEADER_SRV          =
*   IT_HEADER_SRV_UP       =
*   IT_USERSTATUS          =
*   IT_PARTNER             =
*   IT_PARTNER_UP          =
      it_operation           = it_operation
*   IT_OPERATION_UP        =
*   IT_RELATION            =
*   IT_RELATION_UP         =
      it_component           = it_component
      it_component_up        = it_component_up
*   IT_TEXT                = it_text
*   IT_TEXT_LINES          =
      extension_in           = et_extension_in
      et_return              = et_return
      et_numbers             = et_numbers.
CLEAR lv_commit.
LOOP AT et_return INTO wa_return.
    IF wa_return-type = 'S' AND NOT wa_return-message_v2 IS INITIAL.
      IF p_test IS INITIAL.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        lv_commit = 1.
      ENDIF.
      EXIT.
    ENDIF.
ENDLOOP.
IF lv_commit IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ENDIF.
break zaladev.
*&      Form it_methods_fill
*       text
* --> p1        text
* <-- p2        text
FORM it_methods_fill.
IF p_create = 'X'.                               "LÉTREHOZÁS
    MOVE '1' TO wa_methods-refnumber.
    MOVE 'HEADER' TO wa_methods-objecttype.
    MOVE 'CREATE' TO wa_methods-method.
    MOVE '%00000000001' TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
    MOVE '1' TO wa_methods-refnumber.
    MOVE 'OPERATION' TO wa_methods-objecttype.
    MOVE 'CREATE' TO wa_methods-method.
    MOVE '%000000000010010' TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
    MOVE '2' TO wa_methods-refnumber.
    MOVE 'OPERATION' TO wa_methods-objecttype.
    MOVE 'CREATE' TO wa_methods-method.
    MOVE '%000000000010020' TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
    MOVE '3' TO wa_methods-refnumber.
    MOVE 'OPERATION' TO wa_methods-objecttype.
    MOVE 'CREATE' TO wa_methods-method.
    MOVE '%0000000000100200010' TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
    MOVE '4' TO wa_methods-refnumber.
    MOVE 'OPERATION' TO wa_methods-objecttype.
    MOVE 'CREATE' TO wa_methods-method.
    MOVE '%0000000000100200020' TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
    IF p_compon = 'X'.
      MOVE 1 TO wa_methods-refnumber.
      MOVE 'COMPONENT' TO wa_methods-objecttype.
      MOVE 'CREATE' TO wa_methods-method.
      MOVE '%00000000001' TO wa_methods-objectkey.
      APPEND wa_methods TO it_methods.
      MOVE 2 TO wa_methods-refnumber.
      MOVE 'COMPONENT' TO wa_methods-objecttype.
      MOVE 'CREATE' TO wa_methods-method.
      MOVE '%00000000001' TO wa_methods-objectkey.
      APPEND wa_methods TO it_methods.
    ENDIF.
    MOVE '1' TO wa_methods-refnumber.
    MOVE '' TO wa_methods-objecttype.
    MOVE 'SAVE' TO wa_methods-method.
    MOVE '%00000000001' TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
ELSE.                                            "MÓDOSÍTÁS
    MOVE '1' TO wa_methods-refnumber.
    MOVE 'HEADER' TO wa_methods-objecttype.
    MOVE 'CHANGE' TO wa_methods-method.
    MOVE p_aufnr TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
    IF p_compon = 'X'.
      MOVE 1 TO wa_methods-refnumber.
      MOVE 'COMPONENT' TO wa_methods-objecttype.
      MOVE 'CHANGE' TO wa_methods-method.
      MOVE p_aufnr TO wa_methods-objectkey.
      APPEND wa_methods TO it_methods.
      MOVE 2 TO wa_methods-refnumber.
      MOVE 'COMPONENT' TO wa_methods-objecttype.
      MOVE 'CHANGE' TO wa_methods-method.
      MOVE p_aufnr TO wa_methods-objectkey.
      APPEND wa_methods TO it_methods.
      MOVE 3 TO wa_methods-refnumber.
      MOVE 'COMPONENT' TO wa_methods-objecttype.
      MOVE 'DELETE' TO wa_methods-method.
      MOVE p_aufnr TO wa_methods-objectkey.
      APPEND wa_methods TO it_methods.
    ENDIF.
    MOVE '1' TO wa_methods-refnumber.
    MOVE '' TO wa_methods-objecttype.
    MOVE 'SAVE' TO wa_methods-method.
    MOVE p_aufnr TO wa_methods-objectkey.
    APPEND wa_methods TO it_methods.
ENDIF.
ENDFORM.                    " it_methods_fill
*&      Form it_header_fill
*       text
* --> p1        text
* <-- p2        text
FORM it_header_fill .
IF p_create = 'X'.                               "LÉTREHOZÁS
    MOVE '%00000000001' TO wa_header-orderid.
    MOVE 'D210' TO wa_header-order_type.           "rendelésfajta
    MOVE '2000' TO wa_header-planplant.            "tervező gyár
    MOVE '19' TO wa_header-mn_wk_ctr.              "fel.munkahely
    MOVE '2000' TO wa_header-plant.                "fel.munkahely gyára
    MOVE 'CUV-SZV-CSUR-ATEM-I...' TO wa_header-funct_loc. "műsz.hely
    MOVE '' TO wa_header-equipment.                "berendezés
    MOVE '' TO wa_header-material.                 "anyagszám
*    MOVE '' TO wa_header-LOC_WK_CTR.               "fel.munkahely
*    MOVE '' TO wa_header-LOC_COMP_CODE.            "vállalat
*    MOVE sy-datum TO wa_header-START_DATE.         "kezdés dátuma
*    MOVE sy-datum TO wa_header-FINISH_DATE.        "befejezés dátuma
*    MOVE '' TO wa_header-BASICSTART.               "kezdés időpontja
*   MOVE '' TO wa_header-BASIC_FIN.                "befejezés időpontja
    MOVE 'Teszt szöveg 1' TO wa_header-short_text. "szöveg
    APPEND wa_header TO it_header.
ELSE.                                            "MÓDOSÍTÁS
    MOVE p_aufnr TO wa_header-orderid.
    MOVE 'CUV-SZV-CSUR-ATEM-II..' TO wa_header-funct_loc. "műsz.hely
    MOVE 'Teszt szöveg módosítva 2' TO wa_header-short_text. "szöveg
    APPEND wa_header TO it_header.
ENDIF.
ENDFORM.                    " it_header_fill
*&      Form it_operation_fill
*       text
* --> p1        text
* <-- p2        text
FORM it_operation_fill .
IF p_create = 'X'.                                "LÉTREHOZÁS
    MOVE 10 TO wa_operation-activity.             "művelet
    MOVE ''     TO wa_operation-sub_activity.         "al-művelet
    MOVE 'PM01'     TO wa_operation-control_key.         "vezérlő kulcs
*    MOVE '19'   TO wa_operation-WORK_CNTR.            "munkahely
*    MOVE '2000' TO wa_operation-PLANT.                "gyár
    MOVE ''     TO wa_operation-standard_text_key.    "mintakulcs
    MOVE 'Művelet leírása 1.sor' TO wa_operation-description."leírás
    MOVE ''     TO wa_operation-vendor_no.            "szállító
*    MOVE 3      TO wa_operation-quantity.             "mennyiség
*    MOVE 'KG'   TO wa_operation-base_uom.             "menny.egys.
*    MOVE 500    TO wa_operation-PRICE.                "ár
*    MOVE 1      TO wa_operation-PRICE_UNIT.           "áregység
*    MOVE 'HUF' TO wa_operation-CURRENCY.             "pénznem
*    MOVE ''     TO wa_operation-PERS_NO.              "törzsszám
    MOVE 10      TO wa_operation-work_activity.        "művelet munkája
*    MOVE 'KG'   TO wa_operation-UN_WORK.              "művelet munkája
    MOVE 2      TO wa_operation-number_of_capacities. "szüks. kapacitás
    APPEND wa_operation TO it_operation.
    MOVE 20 TO wa_operation-activity.             "művelet
    MOVE ''     TO wa_operation-sub_activity.         "al-művelet
    MOVE 'PM01'     TO wa_operation-control_key.         "vezérlő kulcs
*    MOVE '19'   TO wa_operation-WORK_CNTR.            "munkahely
*    MOVE '2000' TO wa_operation-PLANT.                "gyár
    MOVE ''     TO wa_operation-standard_text_key.    "mintakulcs
    MOVE 'Művelet leírása 2.sor' TO wa_operation-description."leírás
    MOVE ''     TO wa_operation-vendor_no.            "szállító
*    MOVE 5      TO wa_operation-quantity.             "mennyiség
*    MOVE 'KG'   TO wa_operation-base_uom.             "menny.egys.
*    MOVE 500    TO wa_operation-PRICE.                "ár
*    MOVE 1      TO wa_operation-PRICE_UNIT.           "áregység
*    MOVE 'HUF' TO wa_operation-CURRENCY.             "pénznem
*    MOVE ''     TO wa_operation-PERS_NO.              "törzsszám
    MOVE 5      TO wa_operation-work_activity.        "művelet munkája
*    MOVE 'KG'   TO wa_operation-UN_WORK.              "művelet munkája
    MOVE 1      TO wa_operation-number_of_capacities. "szüks. kapacitás
    APPEND wa_operation TO it_operation.
    MOVE 20 TO wa_operation-activity.             "művelet
    MOVE 10     TO wa_operation-sub_activity.         "al-művelet
    MOVE 'PM01'     TO wa_operation-control_key.         "vezérlő kulcs
*    MOVE '19'   TO wa_operation-WORK_CNTR.            "munkahely
*    MOVE '2000' TO wa_operation-PLANT.                "gyár
    MOVE ''     TO wa_operation-standard_text_key.    "mintakulcs
    MOVE 'Alművelet leírása 2/1.sor' TO wa_operation-description."leírás
    MOVE ''     TO wa_operation-vendor_no.            "szállító
*    MOVE 5      TO wa_operation-quantity.             "mennyiség
    MOVE 'KG'   TO wa_operation-base_uom.             "menny.egys.
*    MOVE 500    TO wa_operation-PRICE.                "ár
*    MOVE 1      TO wa_operation-PRICE_UNIT.           "áregység
*    MOVE 'HUF' TO wa_operation-CURRENCY.             "pénznem
*    MOVE ''     TO wa_operation-PERS_NO.              "törzsszám
    MOVE 2      TO wa_operation-work_activity.        "művelet munkája
*    MOVE 'KG'   TO wa_operation-UN_WORK.              "művelet munkája
    MOVE 1      TO wa_operation-number_of_capacities. "szüks. kapacitás
    APPEND wa_operation TO it_operation.
    MOVE 20 TO wa_operation-activity.             "művelet
    MOVE 20     TO wa_operation-sub_activity.         "al-művelet
    MOVE 'PM01'     TO wa_operation-control_key.         "vezérlő kulcs
*    MOVE '19'   TO wa_operation-WORK_CNTR.            "munkahely
*    MOVE '2000' TO wa_operation-PLANT.                "gyár
    MOVE '11'     TO wa_operation-standard_text_key.    "mintakulcs
    MOVE 'Alművelet leírása 2/2.sor' TO wa_operation-description."leírás
    MOVE ''     TO wa_operation-vendor_no.            "szállító
    MOVE 5      TO wa_operation-quantity.             "mennyiség
    MOVE 'KG'   TO wa_operation-base_uom.             "menny.egys.
*    MOVE 500    TO wa_operation-PRICE.                "ár
*    MOVE 1      TO wa_operation-PRICE_UNIT.           "áregység
*    MOVE 'HUF' TO wa_operation-CURRENCY.             "pénznem
*    MOVE ''     TO wa_operation-PERS_NO.              "törzsszám
    MOVE 3      TO wa_operation-work_activity.        "művelet munkája
*    MOVE 'KG'   TO wa_operation-UN_WORK.              "művelet munkája
    MOVE 1      TO wa_operation-number_of_capacities. "szüks. kapacitás
    APPEND wa_operation TO it_operation.
ELSE.                                            "MÓDOSÍTÁS
ENDIF.
ENDFORM.                    " it_operation_fill
*&      Form it_component_fill
*       text
* --> p1        text
* <-- p2        text
FORM it_component_fill.
IF p_create = 'X'.                                   "LÉTREHOZÁS
    MOVE '0010'            TO wa_component-item_number.
    MOVE '000000023336110300' TO wa_component-material.   "cikkszám
    MOVE '2000'        TO wa_component-plant.      "gyár
    MOVE '0001'        TO wa_component-stge_loc.   "raktár
    MOVE 1             TO wa_component-requirement_quantity. "felh.m.
    MOVE '0020'        TO wa_component-activity.   "művelet
    APPEND wa_component TO it_component.
    MOVE '0020'         TO wa_component-item_number.
    MOVE '000000095000001900' TO wa_component-material.   "cikkszám
    MOVE '2000'         TO wa_component-plant.      "gyár
    MOVE ''             TO wa_component-stge_loc.   "raktár
    MOVE 2              TO wa_component-requirement_quantity. "felh.m.
    MOVE '0020'         TO wa_component-activity.   "művelet
    MOVE 'N'            TO wa_component-item_cat.   "tételtípus
    MOVE '0000000014'   TO wa_component-vendor_no.   "szállító
    APPEND wa_component TO it_component.
ELSE.                                                "MÓDOSÍTÁS
    SELECT * FROM resb
      INTO TABLE it_resb
      WHERE aufnr EQ p_aufnr.
    IF sy-subrc = 0.
      READ TABLE it_resb INTO wa_resb
        WITH KEY aufnr = p_aufnr.
      MOVE wa_resb-rsnum TO wa_component-reserv_no.
    ELSE.
      CLEAR wa_component-reserv_no.
    ENDIF.
    MOVE '0010'            TO wa_component-item_number.
    MOVE '0001'        TO wa_component-res_item.
*    MOVE '000000023336110400' TO wa_component-material.   "cikkszám
*    MOVE '2000'        TO wa_component-plant.      "gyár
*    MOVE '0001'        TO wa_component-stge_loc.   "raktár
    MOVE 6             TO wa_component-requirement_quantity. "felh.m.
    MOVE '0020'        TO wa_component-activity.   "művelet
    APPEND wa_component TO it_component.
    MOVE 'X' TO wa_component_up-requirement_quantity.
    MOVE 'X' TO wa_component_up-activity.
    APPEND wa_component_up TO it_component_up.
    MOVE '0020'            TO wa_component-item_number.
    MOVE '0002'        TO wa_component-res_item.
*    MOVE '000000095000001800' TO wa_component-material.   "cikkszám
*    MOVE '2000'        TO wa_component-plant.      "gyár
*    MOVE '0001'        TO wa_component-stge_loc.   "raktár
    MOVE 6             TO wa_component-requirement_quantity. "felh.m.
    MOVE '0010'        TO wa_component-activity.   "művelet
    APPEND wa_component TO it_component.
*    MOVE 'X' TO wa_component_up-material.
    MOVE 'X' TO wa_component_up-requirement_quantity.
    MOVE 'X' TO wa_component_up-activity.
    APPEND wa_component_up TO it_component_up.
    MOVE '0030'            TO wa_component-item_number.
    MOVE '000000023336110400' TO wa_component-material.   "cikkszám
    MOVE '2000'        TO wa_component-plant.      "gyár
    MOVE '0001'        TO wa_component-stge_loc.   "raktár
    MOVE 7             TO wa_component-requirement_quantity. "felh.m.
    MOVE '0020'        TO wa_component-activity.   "művelet
    APPEND wa_component TO it_component.
ENDIF.
ENDFORM.                    " it_component_fill

NAT to another subnet with another BM server

setting up a GWGuardian server with 2 groupwise systems...
i successfully NAT local groupwise to GWGuardian...
now having trouble with the other Groupwise system
this groupwise system is on different subnet with a different Bordermanager
server
this bordermanager server handles the NAT to the groupwise system...
when i changed the NAT to the GWGuardian server... nothing happens...
no email goes through and the NAT doesn't reponse to pings
this site with the different BM and groupwise is in different city...
and connected by a cisco router
i would like to know if this can work...
thanks

both LANs have there own BM servers...
connected by the Cisco routers through the internet...
at both sites...
there is BM, GW, there own subnets and own public IP addresses....
both BM handles NAT to the mail servers...
setup GWGuardian...
have to change the NAT to the GWguardian workstation...
GWguardian handles all the external emails comes in the email server and
send all good email to the GWserver
the remote place...
i am trying to Static NAT public address(public address of mail server) to
private address of GWguardian server...
the GWguardian server is located on a different subnet with different BM
server...
GWguardian has ability to have 2 gw server on it...
we want to have both GW servers using GWguardian as the mail gateway
but the static NAT doesn't seem to work for the remote place..
thanks for your fast response...
sorry for not explaining it correctly... i hope this explains it more

Question about Communication with Oracle 7

Hi,
Generally we use Oracle Snapshots for Communication, but since Oracle 9.2.0.5 do not work with Oracle 7.1.5.2.4. we are thinking about do use Oracle Interconnect for this Link.
Now I have the following two Questions about Communication with Oracle 7:
1. Is an Adapter for Oracle 7.1.5.2.4 available?
2. From your experience, does it make sense to install Oracle Interconnect for implementation of only one read only Link with 3 Tables if an OAS for BI is available?
Thanks,
Hannes

1. The Oracle database adapter is for Oracle 8i and up. I checked the code needed in the database and doubt that will work in Oracle 7.
1. The other option Advanced Queuing also needs 8i and up.
2. For me it doesnt make sense that you want to connect to Oracle 7. Oracle 7 is unsupported and should not have to be developed against. Also the license costs for Oracle Interconnect ~17K without any discount is a bit steep for read only links to three tables. Having the OAS means you wont have to pay another additional ~17K for the apps server.

MY FONT SELECTION IN ELEMENTS 8 HAS WENT FROM HUNDREDS TO ABOUT 20 WITH NO WAY TO SCROLL FOR OTHERS?

MY FONT SELECTION IN ELEMENTS 8 HAS WENT FROM HUNDREDS TO ABOUT 20 WITH NO WAY TO SCROLL FOR OTHERS? ANYONE HAVE ANY CLUES DELETED OF COMP AND RE INSTALLED AND STILL THE SAME ON WINDOWS 7

See if this helps:
http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html

What's the different about sa38 with or without variant?

dear all,
What's the different about sa38 with or without variant?
I don't have the idea.
Best Regard!

Hi
Variants allow you to save sets of input values for programs that you often start with the same selections. You can use them for any programs except subroutine pools. Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values. You can also use variants to change the appearance of the selection screen by hiding selection criteria. This is particularly useful when you are working with large selection screens on which not all of the fields are relevant.
So basically variants are use to ease your work directly or indirectly. Otherwise every time you need to give input to those values. To avoid doing the same steps again and again for selection screens you can create variants.
Hope this helps!!
Thanks and Regards
Esha Rajpal

Can u send me the link which describes me in about bdc with direct method

Can u send me the link which describes me in about bdc with direct method with examples in detail

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
reward if useful
regards,
Anji

This is about issues with the approval of product registration.

Hi.
This is about issues with the approval of product registration.
In the absence of category for my problem dealing with Office 2007, I had to choose one of the enlightened choice categories. My proglem. Office 2007 is all well installed and functioning satisfactorily, except Picture Manager section. Every time I choose the
display of an image through Microsoft Picture Manager, I asked about registration. Several times I answered yes, and license code, implementation of tracing the proceeds smoothly. The problem is that by next preliminary to display images with Picture Manager
and it does not hsuker that I am registered and authenticated user.
What to do and what can I check out?
In advance thank you.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Is it Possible to Promote DC on a Subnet With Connectivity to a Site DC But Not DC with FSMO Roles???

I apologize in advance for the rambling novella, but I tried to include as many details ahead of time as I could.
I guess like most issues, this one's been evolving for a while, it started out with us trying to add a new member
to a replication group that's on a subnet without connectivity to the FSMO roles holder. I'll try to describe the
layout as best as I can up front.
The AD only has one domain & both the forest & domain are at 2008R2 function level. We've got two sites defined in
Sites & Services, Site A is an off-site datacenter with one associated subnet & Site B with 6 associated subnets, A-F.
The two sites are connected by a WAN link from a cable provider. Subnets E & F at Site B have no connectivity to Site A
across that WAN, only what's available through the front side of the datacenter through the public Internet. The network
engineering group involved refuses to route that WAN traffic to those two subnets & we've got no recourse against that
decision; so I'm trying to find a way to accomplish this without that if possible.
The FSMO roles holder is located at Site A. I know that I can define a Site C, add Subnets E & F to that site, & then
configure an SMTP site link between Sites A & C, but that only handles AD replication, correct? That still wouldn't allow me, for example,
to enumerate DFS namespaces from subnets E & F, or to add a fileserver on either of those subnets as a member to an existing
DFS replication group, right? Also, root scalability is enabled on all the namespace shares.
Is there a way to accomplish both of these things without transferring the FSMO roles from the original DC at Site A to, say,
the bridgehead DC at Site B?
When the infrastructure was originally setup by a former analyst, the topology was much more simple & everything was left
under the Default First Site & no sites/subnets were setup until fairly recently to resolve authentication issues on
Subnets E & F... I bring this up just to say, the FSMO roles holder has held them throughout the build out & addition of
all sorts of systems & I'm honestly not sure what, if anything, the transfer of those roles will break.
I definitely don't claim to be an expert in any of this, I'll be the first to say that I'm a work-in-progress on this AD design stuff,
I'm all for R'ing the FM, but frankly I'm dragging bottom at this point in finding the right FM. I've been digging around
on Google, forums, & TechNet for the past week or so as this has evolved, but no resolution yet.
On VMs & machines on subnets E & F when I go to DFS Management -> Namespace -> Add Namespaces to Display..., none show up
automatically & when I click Show Namespaces, after a few seconds I get "The namespaces on DOMAIN cannot be enumerated. The
specified domain either does not exist or could not be contacted". If I run a dfsutil /pktinfo, nothing shows except \sysvol
but I can access the domain-based DFS shares through Windows Explorer with the UNC path \\DOMAIN-FQDN\Share-Name then when
I run a dfsutil /pktinfo it shows all the shares that I've accessed so far.
So either I'm doing something wrong, or, for some random large, multinational company, every sunbet & fileserver one wants
to add to a DFS Namespace has to be able to contact the FSMO roles holder? Or, are those ADs broken down with a child domain
for each Site & a FSMO roles holder for that child domain is located in each site?

Hi Matthew,
Unfortunately a lot of the intricacies of DFS leave my head as soon as I’m done with a particular design or troubleshooting situation but from memory, having direct connectivity to the PDC emulator for a particular domain is the key to managing domain based
DFS.
Have a read of this article for the differences between “Optimize for consistency” vs “Optimize for scalability”:
http://technet.microsoft.com/en-us/library/cc737400(v=ws.10).aspx
In brief, I’d say they mean:
In consistency mode the namespace servers always poll the PDCe for the latest and greatest information on the namespaces they are hosting.
In scalability mode the namespace servers should poll the closest DC for information on the namespaces they are hosting.
The key piece of information in that article about scalability mode is: “Updates are still made to the namespace object in Active Directory on the PDC emulator, but namespace servers do not discover those changes until the updated namespace object replicates
(using Active Directory replication) to the closest domain controller for each namespace server.”
I read that as saying you can have a server running DFS-N as long as it has connectivity to a DC but if you want to make changes, do them from a box that has direct connectivity to the PDCe. Then let AD replication float those changes out to your other DCs
where the remote DFS-N server will eventually pick them up. Give it a try and see how you get on.
That being said, you may want to double check that you have configured the most appropriate FSMO role placement in your environment's AD design:
http://technet.microsoft.com/en-us/library/cc754889(v=ws.10).aspx
And a DFS response probably wouldn’t be complete without an AskDS link:
http://blogs.technet.com/b/askds/archive/2012/07/24/common-dfsn-configuration-mistakes-and-oversights.aspx
These links may also help:
http://blogs.technet.com/b/filecab/archive/2012/08/26/dfs-namespace-scalability-considerations.aspx
http://blogs.technet.com/b/josebda/archive/2009/12/30/windows-server-dfs-namespaces-reference.aspx
http://blogs.technet.com/b/josebda/archive/2009/06/26/how-many-dfs-n-namespaces-servers-do-you-need.aspx
I hope this helps,
Mark

About Subnet with RV042

Similar Messages

Maybe you are looking for