About switching (newbie question #1a)

Coming from Aperture but trying LR4.1, I've found it painful to learn all the differences when you know Aperture well.
I do have Victoria Bampton's book, which I am slowly going through.
But some initial questions:
-I've seen some definite buggy behaviour (forget what the issue was now), but it went away when I relaunched the s/w:
how stable is LR generally? (being at the 4.1 release level, I thought it should be pretty stable; sounds like the Adobe s/w stability is not near Aperture from the reports I've seen about buggy behaviour (PS on the other hand I've never had a problem with; just upgraded to CS6 which is in part why I also got LR 4.1)
-I don't know if this is a bug or a user issue: in grid view for a folder I select a photo (a virtual version, if that matters), then switch to loupe view:
why does the arrow key (L or R arrow) jump wildly to some distant photo [relative to grid view and relative to filmstrip at botto] and back, instead of just moving along to the next/adjacent photo beside the current photo?
Just tried this again and now it is jumping to the adjacent photo AND BACK: eg keep pressing R arrow and it just toggles between these two adjacent images:
now I must point out that these two photos have a black and white diamond.
But I have loupe view not Compare view. So what is going on?
I just noticed if I clicked on one of the diamonds in the filmstrip I seemed to have exited that funky mode. But then somehow got right back in it. Then noticed I had my second display turned on and turning that off also got me out of the funny mode. This is really confusing.
It appears the secondary display can have its own display mode: eg I've selected Loupe view, but once the secondary display was enabled, it showed Compare view despite my having already chosen loupe view, seems turning on that second display lets LR ignore you're set view...and you have to manually change that second display view also to Loupe to fix the issue.
I think the issue is that the diamonds where on effectively putting me in compare view against my will/my command and against the displayed view mode shown in the View menu (all because the 2nd display was enabled and decided to use its own view mode!!). Does that sound right? Is that a bug or something Adobe would call an undocumented feature or what???
-brushes:
is there a way after I've applied one brush, then hit NEW to apply a second brush, for me to go back and further modify the first brush? EG add to or modify the strength of the first brush effect?
If so, I am not seeing where in the UI you would go to access that.
-keywords:
I imported a keyword list and this shows up fine.
I had a photo and dragged several keywords from this keyword list onto the photo and then let go (when I dragged onto the photo a green circle with a plus sign showed, suggesting I was adding the keyword to the photo).
But the published photo on smugmug showed no keywords.
So I go back to LR and look for the keywords but don't see anything.
Where do an images assigned keywords show up? Is it in the box below I've highlighted in red? I tried again, and after dragging and dropping a keyword on an image, that box remains empty!
Any help appreciated.
-Colin

I'll answer the questions that I can
how stable is LR generally?
Extremely stable for me and others, unstable for some
-I don't know if this is a bug or a user issue: in grid view for a folder I select a photo (a virtual version, if that matters), then switch to loupe view:
why does the arrow key (L or R arrow) jump wildly to some distant photo [relative to grid view and relative to filmstrip at botto] and back, instead of just moving along to the next/adjacent photo beside the current photo?
If you have multiple photos selected, for example one that is visible and one selected that you would have to scroll way down to see in the grid, the arrow keys in loupe mode will behave like this ... it will scroll left or right to the next selected photo, not the next photo
is there a way after I've applied one brush, then hit NEW to apply a second brush, for me to go back and further modify the first brush? EG add to or modify the strength of the first brush effect?
Sure. There is a "pin", actually a circular icon the represents the starting location of each brush. If you click on a pin, you can add additional edits or brush strokes
I had a photo and dragged several keywords from this keyword list onto the photo and then let go (when I dragged onto the photo a green circle with a plus sign showed, suggesting I was adding the keyword to the photo).
But the published photo on smugmug showed no keywords.
So I go back to LR and look for the keywords but don't see anything.
Depends on what you did. Publish to Smugmug, there is probably an option that removes metadata on export. This would be in the Export dialog box.
Go back to LR and the keywords aren't there ... did you by any chance re-import these photos?

Similar Messages

Newbie Question about FM 8 and Acrobat Pro 9

Hello:
I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
My newbie question is whether there is a way to create a PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
TIA,
Kimberly

Kimberly,
How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
Temporarily change the color definition for the color used in the cross-reference format to black.
Temporarily change the character format to not use that color.
Temporarily change the cross-reference definition to not used that character format.
Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
- Michael

Newbie question about saving files

Hi all,
A newbie question here, and maybe it is a dumb question, but I can't get my head around this and sofar found no answer in the forums here.
When I save a file on my macbook, I can only save it to "top" folders.
What I mean is I try to save a file for instance to documents/worddocs/lyrics just to say something, then I have to save the file first to documents, and the move it to the lyrics folder via finder or move it to :worddocs folder and then move it again to the lyrics folder. Hope you still get my drift here
Is there a way to just save it to the subfolders without going through all this moving around?
Thanks in advance for any advice
Peter

When you click File>Save As, you will see the Save As window pop up. At the top, you will see a box entitled Save As, which has a space for your to enter the file name. To the right of this box is an arrow pointing down. Click it. The full file hierarchy will be seen. Then you can save directly to the file you want.
Hope this helps.
Don

2 newbies question about diskgroups

Hi gurus,
I have 2 newbies question:
Im working in a RAC Database (11.2.0.3) on Redhat 5.3 with some disk groups. One of this groups have 6 disks on it with different space (134, 236G, 236G, 185G, 185G and 185G).
My questions are:
1) What would be happend when the lower space disk will be full?
2) At this moment the diskgroups are at 45% so i was thinking to change their spaces to have all with the same space (around 193G each), it would create any problem? i should restart database or can do it with database up?
Thanks

if a disk is filled, what would happen? could i resize the disks with same size without stop database and without affecting the data stored within each disc?
By the word 'disk' I assume you mean LUN . When a LUN in a disk group is filled, ASM will use the remaining LUNs to store the data. You should always use LUNs of uniform size to avoid uneven I/O .
could i resize the disks with same size without stop database and without affecting the data stored within each disc
You can get the Unix/Storage team to allocate more LUNs for this Server. Once these LUNs are added , check if the following pre-reqs are met for the LUN which is yet to be added to the disk group
v$asm_disk.HEADER_STATUS = 'CANDIDATE'
v$asm_disk.PATH = /dev/rdsk/youLUNname
v$asm_disk.NAME will be NULL
Now you can add the LUNs using
alter diskgroup DATA_DG01 add disk '/dev/rdsk/youLUNname' rebalance power 4 ; wait for rebalance to finish (check status in V$ASM_OPERATION)
Yes. The above can be done without stopping the DB. It won't affect the stored data either.

SG200-08 Newbie Questions

I have recently purchased the SG200-08 Smart Switch, but I have a few "newbie questions" about it as I get started using it.
The on board firmware shows 1.0.1.0. Is that the latest firmware to the switch?
Do I need to enable IPv6 Auto Configuration and DCHPv6 in my switch settings to be ready for IPv6 as my ISP rolls it out down the road?
How do I go about changing the switch's username? I was able to easily change the password, but having issues getting the username to change.
Do I need to do anything about the LLDP-MED settings? What exactly is that?
How do I confugure the System Time Settings so the switch functions in my time zone (USA Central Time)?
Thanks a bunch for any assistance!

Hi Nathan,
My guess is that NAT is already on - you have one public IP address from your ISP. Your router will use NAT (network address translation) to allow multiple clients (and either dynamically assign them private IPs via dhcp or you set them statically) to connect to the internet using the one public IP. It also sounds like your RV042G is assigning both ipv6 and ipv4 addresses, and theres nothing wrong with that. Unless you have specific information re: ipv6 from your isp, however, I would suggest not worrying about it until you hear from them. Are your macs connected to the router via the SG200 switch? If so, it looks like its passing ipv6 just fine. UPnP is something completely different - thats with opening ports like you mentioned - its a way that your devices can communicate with the router to automatically enable the proper port forwarding for the device/application.
Regarding the username, create a new user account. I don't think you can edit the cisco user, but try deleting it after creating and testing a new user account..
I'm not familiar with the Polycom system, but I would leave the settings as default unless you are using true IP phones (rather than an ATA adapter). From a quick google of the polycom device, I don't think you will gain anything from LLDP/CDP as the handsets use regular cordless phone freqs. With my setup, we use cisco IP desk phones and cordless wifi phones, CDP makes life easy as the cisco access point, wifi phones, cisco switch, and cisco desk phones (connected via ethernet) see each other and know what they're dealing with automatically.
I don't see the SNTP setting for unicast / broadcast that you're looking at. For the switch to get the time from a sntp server, under administration -> time -> sntp settings, add a server, and then back on time-> system time, enable sntp server as the main clock source. What are you using as your sntp source? Do you have an internal sntp server? You don't need to enable dhcp on the sntp server.
May I also point you to the two manuals, I think they may be helpful: RV042G & SG200
Hope thats helpful.
Best,
David
Please rate any helpful posts.

Some newbie questions

dear all smart men, i am a newbie in xml domain, there are some quiestions that i can't make sense yet, anyone can help:
1. dose the xml is independent from protocals? we can bind xml to http and sock too, and something this kind of?
2. soap is called a "protocol", but in fact it's a kind of xml application with standard format. we all know that xml is used for describing data, and soap has this functionality too, but why soap is isolatable from common xml? what is its purpose?
3. jxta is a set of protocols used for p2p purpose. most of these protocols are also used in xml, but how they get their goals. For exmaple the ERP protocol in JXTA, it can route the routine the message transimited. but it seems the network protocol can achieve, how the xml can do this? (i have read some docs about this i can't make sense about it yet)
all above are some questions i met by now, for i am a newbie in this field, so i may have some misunderstading about xml/soap/jxta, if any pls feel free to critise, that i can step further =).
Thanx, and good luck to you all.

Thanx Dodossot =)!
your answers are quite helpful really, now i feel the cloud dispersed already.
about the 3rd question, for you have answer the first and second, the third is not a problem now. what i need is to read more about JXTA protocols. if you are interested about them, you may find some docs at www.jxta.org for more inf.
at last i will say thanx again, and you don't hesitate to say you'r smart =).
best regards.

Multiple version of JRE in company..How to manage? (newbie question)

Greetings..this is a newbie question
We have 48 versions of JRE running in on XP IE6 in our company.
Some version beat up other JAVA applications.
It's a mess.
How can anyone manage this many versions?
Can we consolidate down to a few versions?
I saw some posts on changing the JRE dynamically or perhaps using a wrapper with a product from "sourceforge".
Are these viable?
Thanks in advance

We have 48 versions of JRE running in on XP IE6 in
our company.
Some version beat up other JAVA applications.
It's a mess.can you elaborate on how some versions "beat up" other apps?
How can anyone manage this many versions?you don't, each computer should periodically upgrade (IMO) but you shouldn't care. if you do, tell your users to load the latest version
Can we consolidate down to a few versions?sure
I saw some posts on changing the JRE dynamically or
perhaps using a wrapper with a product from
"sourceforge".
Are these viable?i have no idea what this is, but I have doubts about your problem, if it exists at all

Newbie question: ""dynamic"" casting

Hello all,
 
I have a quite newbie question. I have this class hierarcy:
 
A
|_A1
|_A2
|_A3
|_A4
|_A5
|_.....
 
in some part of my code I have this:
 
if (object1 instanceof A){
if (object1 instanceof A1) {A1 object2 = (A1) e;}
 if (object1 instanceof A2) {A2 object2 = (A2) e;}
 if (object1 instanceof A3) {A3 object2 = (A3) e;}
 if (object1 instanceof A4) {A4 object2 = (A4) e;}
 if (object1 instanceof A5) {A5 object2 = (A5) e;}
object2.callMethod();
 
Is there any way to do this type of casting just in one line? I mean, I just want to cast object1 to the class it is instanceof. If it is instance of A1, I want to be casted to A1, if it is A2 to A2, etc...
 
Thanks you in advance.

kamikaze04 wrote:
In fact I know what object1 is on execution time,Which doesn't help your compiler at all, when it's task to link and verify method calls.
because the code posted at the top is working well, i just want to avoid repeating that if's for all the new classes Ax I will create. Big "code smell" here.
In other words if i had from A1 to A200 i dont want to have 200 if's to cast it to the class it is and then execute it's method.You could call the method "doMagic()" and make it abstract in A. Then you can implement it in all Ax classes and would never have to worry about casting in the first place, because A.doMagic() would automagically do the right thing. Polymorphism.

WebDynPro Newb question

Hey All,
I need to begin working with WebDynPro. I have a couple of Newb questions:
1) I need to jump right in fairly quickly, so can anyone suggest any good documentation that could help me get the basics down about working with WebDynPro?
2) I loaded a Sample WebDynPro project into NetWeaverDev Studio, but I am unable to export this to our instance of EP on our Development Server. For a .par file its easy to do exports, but I can't for the life of me find where i go in NetWeaverDev Studio to do an export of a WebDynPro project. When I goto export in the WebDynPro perspective, it appears to only want to allow me to export locally, but I need to push to a different server. Can anyone help me with this?
I appreciate any advice and suggestions. Thanks All!!
Take care,
-Kevin

Hey Rich,
I have the Engine setup, but I do not get prompted for the SDM password, do I need to configure that somewhere? I get the following error when trying to deploy:
Jul 15, 2005 10:13:17 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[004]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
Thanks,
-Kevin

Newb Question for burning DVD/CDs

I have an external DVD writer on my iMac.
I got the thing last month and an completely new to Apple (sorta)
Now how do I make a data CD and DVD?
On Winblows XP all I need to do is select the files, right click and click on SEND FILES TO CD for making data CDs.
However for DVD I need 3rd party software.
Will iDVD do the trick?
Thanks for the looking at this simple newb question.
GeekyBoy

Now how do I make a data CD and
DVD?Drag the files to the icon of the
blank CD/DVD that appears in the
Finder.However for DVD I need 3rd party
software.You might want to try Patc
hBurn.Will iDVD do the
trick?No, iDVD is only for making video
DVDs and it requires a G4 processor.
Thanks for the tip Duane.
I was just reading abotu burning CD on another site. It mentions about what you said, drag the files to the CD.
However I am reading in my profiler that burning is NOT supported by OS X on this CD/DVD writer.
Will Patchburn or any other software overcome this?
Thanks

InDesign or Acrobat (newbie question)

Hi,
I tried posting this in the LiveCycle Designer forum, but I think it's a bit too much of a newbie question:
Once in a blue moon when I'm at work, someone will ask me if I can add text fields to a PDF form so that they can easily type onto it and print it out. I've always done that directly in Acrobat (on the few occasions that it's been requested from me). But I was curious about Adobe LiveCycle since it came with CS3, so I played around with it a couple of days ago. I added the text fields in LiveCycle this time, and it seems to have worked fine. Which is the better program for this kind of task? I'm not 100% clear on the *main* purposes of either program or how they compare. If anyone wanted to give me a clue about it, I'd appreciate it!
Thanks,
Phyllis

> I thought perhaps you could add that capability
You can (I said I was oversimplifying). However there are contractual
limits - to oversimplify (!) 500 users per form.
>Which would be preferable -- receiving form data from LiveCycle or Acrobat?
It depends what you want to do.
>
>I wish I knew what the difference was between these two programs. Is it purely a matter of emphasis on one task or another?
They come to the same problem in different ways. For a simple task
they may seem pretty much the same. Some differences:
* A form made in Acrobat is a PDF with form fields stuck on top; it
remains a normal PDF in every other way. Forms are almost always made
by preparing an existing PDF, then adding form fields.
* A form made in Designer is barely a PDF. It's a wrapper round an XML
file. You can no longer edit it in Acrobat, ever, even for the most
simple things. PDF files are imported and converted (sometimes with
loss of quality or features), or forms are made from scratch.
* Acrobat form fields are fixed size.
* Designer form layout can be dynamic.
Aandi Inston

A few newbie questions...Please help!

I'm brand new here - considering getting a Droid Incredible.
Please help me with the following (albeit somewhat random!) questions...
When I set up the phone, I only want to use Gmail. Will Gmail automatically be made my default email program, or will the regular HTC Mail program also be loading my Gmail? I'd rather not have conflicting notifications.
Voicemail. Thinking of getting regular Basic Voicemail. Do I get notifications every time I get a voicemail? When I click on it, will it take me directly to the voicemail, or will I still have to jump through the password junk? Does Voicemail integrate with the regular Phone app, or is it different?
Does Verizon give me my "Voicemail Pin" or whatever? Do they set it up at the store?
Browser. Is there any way I can set it so that it goes to my home page every time I open it? I hate when it continues from last time.
THANKS IN ADVANCE! I know that I might sound stupid - but this is my first smartphone. I want it to be efficant, easy to use, and slick. Based on the reviews, the Incredible is all that.

nytraveller53 wrote:
THANKS EVERYONE ALREADY! You've already helped me a lot. I think I'm going to take a trip to the Verizon Store today, and discuss some details with them as well.
A couple other questions I had, but I forgot to ask:
Task Killers. I know many Android fans swear by them, but most of the "Tech Experts" (PC World, Wired, etc.) claim that Android is designed to do it by itself. Is a Task Killer really necessary? I personally do not use task killers as they are glorifed battery killers.
How would I go about switching between open apps (WITHOUT using a third-party app), that is different from just going to the home screen again?
SO...Pressing down "1" to get to voicemail needs to be programmed in at Verizon, correct? Making it so that I don't have to enter the password needs to be done at Verizon, correct? And Verizon will give me my voicemail PIN and Password, correct? Call *86 to get to VM. Once there, you will set up your VM and assign a pin. Just follow the instructions.
The Droid Incredible was released almost a year ago now. Does it even make sense to sign up for a smartphone already that old, when I have to have it for 2 years? I'm thinking it might be better to wait for the new Thunderbolt. Your opinion? That is strictly a personal preference. If you are not near an area where LTE service will not be for a while, maybe the cheaper Incredible will be fine for you.
Hulu. Am I correct that Hulu does NOT work on Android, even with Flash? Hulu has blocked access from phones except MAYBE iPhone, but I am not sure
Can someone please give me a list of ALL the apps that CAME with the phone when you got it? (You know, calendar, mail, etc.) Too many to list. What you see is more than waht we got originally. More were added when Froyo came out.
Do I NEED Adobe Reader to see pdf email attachments, or will the "Office" thing display all documents just fine? What does that built in app support anyway? Download the reader
What "Verizon" apps comes with the phone? I don't want VCast and all that, just an app to monitor my minutes. I really hope Verizon doesn't load crapware (cough, HP, cough) onto the phone, do they? Vcast 'Comes' on the phone. You will see it and other apps you may never use on the 'Running' list, but do not dwell on it. If you want an explanation as to why they are 'Running', do a search. Simply they do not use resources unless you ARE using them.
On the phone, are there both "HTC Sense" versions of apps AND regular stock Android apps, or is it all combined? I don't want two contacts apps, for example. You will end up with dup apps if you DL another app. But you can hide the one you do not want to use, if it came with the phone.
Visual Voicemail. I'm considering it, it's just $2.99. And I'm NOT messing with Google Voice. Is VVM integrated with the regular dialer, or is it a seperate program? I've heard reports from both sides on this topic.
How can I make it so the Browser starts up at the home page every time (NO Task killer, please!) You mean have a favorite web page open when you open the browser???
How do you change the address in the web browser without navigating to "Menu" - "Go to" (that's a real pain). Is there a shortcut? Thanks! Bookmarks are your friend
I plan on using this phone for maybe an hour in the morning, not very much during the day, and then about two or three hours total in the afternoon. Will the battery last without me having to turn off different features? I actually WANT the 3G, sync, etc. running! battery life depends on many factors.... Do a search of 'Battery Life' to have help with that
I have super high speed Wifi in my home. When I set up wifi on the device initially, will the phone automatically connect to Wifi instead of 3G everytime I go home? Or do I do this manually? If you keep the WiFi switch on, yes. But keeping it on away from home KILLS the battery as the phone searches and searches
Thanks again - I know these are very nitpicky and detailed questions, but I'm so close to getting the Incredible...I want the full scoop!!
Thanks! I'll probably have more questions, thanks for helping me out! Forgive my stupid questions!

Newbie question. coldFusion w/ Flex 2 tutorial

Hello.
I am very new to F2 and CF. Fairly proficient at Flash, DW,
css, html, etc. I have purchased and worked through a couple really
great F2 and CF books. I am able to construct some good basic stuff
with either. But am not really finding a tutorial or book that is
exclusively committed just to the subject of to using CF with Flex
2. There always seems to be a just a cursory mention, or a
brush-by, but not much more than that. I get it: if you got this
far, you probably arlready know everything about the two and
shouldn't need such.
If you could point me to a couple good references, I'd be
very appreciative. I'm looking for a good step-by-step, just on
this subject.

Thank you. You are right on with the direction of your
answer.
Immediately, I am just trying to create a simple method of
add/edit/delete records to tables from forms that I could access
remotely with Flex 2. I just assumed that CF would be the best
method, both being Macradobe products. If I am wrong about that, so
be it. Utlimately, I would like to print specific "quotes" relative
to specific customers and products to .pdf. This is for my own
personal use (as an insurance broker). Not commercial. Nor is
anyone paying me to develop this.
Maybe a better newbie question would be: what would be the
preferred method to add/edit/delete records, remotely, from a Flex
2 application for later printing to .pdf based on various selection
criteria? I have figured out how to do this on my own stand-alone
machine. Now I want to be able to do it remotely from anywhere.
I'm
not looking for instruction from anyone here, just direction
to your favorite learning tools so that I can dig in and learn.
I bought the books you recommended (adding to my own Library
of Congress).
Thanks again!

RV042G Newbie Questions

I have the new Cisco RV042G router, and I have just a few "newbie questions" about it as I get started using it:
The firmware on board is v4.2.1.02. Since this is a brand new router, is that the latest firmware?
Under Time>DST Dates, what do I need to configure in there? I'm in the US, Central Time.
I want to use Back to My Mac from iCloud (formerly MobileMe). Under the iCloud preferances pane on my Mac, it's saying: "Back to My Mac may be slow because NAT Port Mapping (NAT-PMP) or Universal Plug and Play (UPnP) is turned off on your router. Turn on NAT-PMP or UPnP." What should I enable on my router in order for Back to My Mac to better function?
I'm using a VOIP phone on the network (only 1 device with a couple phones). Are there any QoS settings I should tweak for better performance of my VOIP phone? I did change the port the VOIP phone is connected to to High (instead of Normal) under Port Settings. Will this help boost performance?
I also want to setup a VLAN on a port for guests to access the Internet, but not have any access to my personal network. Here's the steps I've done so far. Is this sufficient or is there anything else I need to do?
I went to Setup>Network, enabled Multiple Subnets.
I added 192.168.254.1/255.255.255.0 as a subnet.
I went to Port Management>Port Setup, set the port I wanted to use (Port 4) to VLAN2.
I went to Firewall>Access Rules, added two rules:
Deny All Traffic from 192.168.254.0 to 192.168.1.0.
Deny All Traffic from 192.168.1.0 to 192.168.1.0.
Thanks everyone for your help!

Easy. just goto the DHCP field and fill in the Static DHCP fields.
Assigning static IP addresses by adding devices from a list
Click Show unknown MAC addresses. The IP & MAC binding list appears. If the web browser displays a message about the pop-up window, allow the blocked content.
The devices are listed by the IP address and the MAC address. (Typically the MAC address appears on a label on the bottom panel or back panel of a device.) If needed, you can clickRefresh to update the data.To select a device, first enter a descriptive Name. Then check the Enable box. Alternatively, select all devices in the list by clicking the check box at the top of the Enable column.
Click OK to add the devices to the Static IP list, or click Close to close the pop-up window without adding the selected devices. After you click OK, a message appears. The message includes important information. Read it before clicking OK. Keep the browser open and wait until the selected MAC addresses appear in the Static IP list.
Modify or remove list entries, as needed:
To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can click Add New to de-select the entry and clear the text fields.
To delete an entry from the list: Click the entry that you want to delete, and then clickDelete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
Assigning static IP addresses by entering devices manuallyIn the Static IP Address section, add or edit entries as needed. Remember that the settings are not saved until you click the Save button.
To add a new device to the list: Enter the following information, and then click Add to list.
Static IP Address: Enter the static IP address. You can enter 0.0.0.0 if you want the router to assign a static IP address to the device.
MAC Address: Enter the MAC address of the device. (Typically the MAC address appears on a label on the bottom panel or the back panel of a device.) Enter the address without punctuation.
Name: Enter a descriptive name for the device.
Enable: Check this box to assign the static IP address to this device.
To add another new entry: Enter the information, and then click Add to list.
To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can clickAdd New to de-select the entry and clear the text fields.
To delete an entry from the list: Click the entry that you want to delete, and then click Delete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
Using the Static IP List to Block Devices
You can use the Static IP list to control access to your network. You can block access by devices that are not on the list or do not have the correct IP address.
Add devices to the Static IP list as described in Static IP Addresses.
Enable or disable the following features:
Block MAC address on the list with wrong IP address: Check this box to prevent a computer from accessing your network if its IP address has been changed. For example, if you previously assigned a static IP address of 192.168.1.100 and someone configures the device to use 192.168.149, the device will not be allowed to connect to your network. This feature discourages users from changing their device IP addresses without your permission. Uncheck the box to allow access regardless of the current IP address assignment.
Block MAC address not on the list: Check this box to block access from devices that are not included in the Static IP list. This feature prevents unknown devices from accessing your network. Uncheck the box to allow access by any connected device that is configured with an IP address in the correct range.
Hope that helps.
Regards Simon
http://www.linksysinfo.org

Trouble backing up Macbook (10.4.11) and some newbie questions...

I am using a MacBook OS X 10.4.11 and do not have Time Machine. I have a couple newbie questions...
What is the best way to back up everything? I am using Disk Utility's Restore tab but it is taking forever. I first tried to do it though Disk Utility's First Aid tab but it wouldn't let me make a New Image because the "source was in use", I think it is because I don't have the Install Disc to begin with (http://support.apple.com/kb/ht1553).
Secondly, does this include everything in "Home" (bookmarks, iPhoto library, iTunes library and so forth), Documents, and Desktop? Or must these be archived and transferred to the external hard drive separately from Macintosh HD?
Thanks in advance for any help!

I tried restarting the phone and switching to another USB cable and now it is working so never mind.

About switching (newbie question #1a)

Similar Messages

Maybe you are looking for