About T410S frezze problem.(I read all relate topic and using latest drivers)

Hi all, I bought a new T410s in Lenovo US online shop in Jan 2011.
T410s 2901 CTO
i5 560M
4G RAM*1 (added another 4G by myself)
Intel 160G SSD
Switchable GPU/ Intel HD+NVS3100M
Mulit-touch screen
Gobi2000 3G WWAN card.
Intel 6200 AGN WIFI card.
OS: Windows 7 x64
basic configuration as above.
I have a despairing frezze problem of this T410S. It's totally random. when it happened, everything is frezzed and the computer is totally dead.
I read the related topics in this forum, my T410s DON'T have overheat issue, when using integrated graphic card, the CPU
temperature is about 50C/122F, the fan speed is about 3000.
I also installed latest drivers form lenovo website, and the machine BIOS is v1.41.
I tried:
Remove the 4G memory which added by myself. ---No effect
Disabled the switchable graphic card in BIOS. -----No effect
help~plz~ . bcz it's a new machine, I do not want ask lenovo to replace the motherboard.
Any suggestions?
ThinkPad T410S, X61T, T42
Solved!
Go to Solution.

Hi and welcome to the forum!
If BIOS' downgrade doesn't fix it, then try booting from LiveCD of Ubuntu, if the system also freezes in linux then it would be hardware issue, try running complete system test through ThinkVantage toolbox.
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?

When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?

If your on 10.6.8 like you should be for security/stability updates, somewhere along the line a later Bootcamp version was issued and only supports Win 7.
You can read my post here for a alternative solution, running a virtual machine software
https://discussions.apple.com/thread/3772839?tstart=0

Problem in reading no. of files and writing into a single file

Hi,
Iam with Problem in reading no. of files and writing into a single file....
Iam reading no. of files stored in local directory.......
Iam able to read and print the data in files successfully....but while writing..only first file is being written...and the next files are not written in my output file...
plz tell me my mistake....I hope Iam doing some mistake while writing into file...PLz help.....
Basically my code structure is like this....
import java.io.*;
import java.util.regex.*;
import java.util.*;
import java.text.*;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hssf.usermodel.HSSFWorkbook;
import org.apache.poi.hssf.usermodel.HSSFSheet;
import org.apache.poi.hssf.usermodel.HSSFRow;
import org.apache.poi.hssf.usermodel.HSSFCell;
class Writing {
public static void main(String args[]) throws Exception {
          FileOutputStream fileOut = new FileOutputStream("ServerResult.xls"); //my output file
          int counter = 1;
          File dir = new File("C:/Perform/ServerLogs");
          String[] children = dir.list();
          if( children == null)
               System.out.println("The Directory mentioned does not exist");
          else {
               for (int fileNo = 0; fileNo < children.length; fileNo++ ) {        //Files iteration starts
                    String filename = children[fileNo];
          File logFile = new File(filename);
FileReader logFileReader = new FileReader(logFile);
BufferedReader logReader = new BufferedReader(logFileReader);
StringBuffer sBuf = new StringBuffer(5000);
          HSSFWorkbook wb = new HSSFWorkbook();
          HSSFSheet sheet = wb.createSheet();
          HSSFRow rowTitle;
          HSSFRow rowReq;
          HSSFRow rowRes;
String aLine = null;
boolean skip = false;
boolean readed = false;
boolean initReq = false;
          boolean flag = false;
long requestTime = 0;
long responseTime = 0;
long recdTime = 0;
long sentTime = 0;
          long hasTime = 0;
          long presentTime = 0;
          int hasCalls = 0;
Pattern startMessage = Pattern.compile("^<MESSAGE.*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern requestMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<ActName>(.*)</ActName>.*", Pattern.DOTALL);
Pattern requestMessage1 = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<Svc id=\"(.*)\">.*", Pattern.DOTALL);
Pattern responseMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"HostConnInit\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initResMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*", Pattern.DOTALL);
Pattern initResIDMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*<IATA>"+args[0]+"</IATA>.*", Pattern.DOTALL);
          Pattern sentMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgSentInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
          Pattern rcvdMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgRcvdInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss.SSS");
DecimalFormat dcf = new DecimalFormat("########.##");
String actName = "";
          if (fileNo ==0)
          rowTitle = sheet.createRow((short)0);
          rowTitle.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)0).setCellValue("Req/Res");
          rowTitle.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)1).setCellValue("Action");
          rowTitle.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)2).setCellValue("Server Time(in ms)");
          rowTitle.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)3).setCellValue("Request Vs Response Time in Server(in ms)");
          rowTitle.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)4).setCellValue("Time Taken By HAS/HOST(in ms)");
          rowTitle.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)5).setCellValue("No. of HAS calls");
          rowTitle.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)6).setCellValue("Data Size");
          //wb.write(fileOut);
while((aLine=logReader.readLine()) != null) {
if(aLine.startsWith("<MESSAGE TYPE=\"EVENT\"")) {
Matcher m = startMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
initReq = false;
m = initMessage.matcher(aLine);
if(m.find()) {
initReq = true;
} else {
if(initReq) {
m = initResMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
} else if(aLine.startsWith("</MESSAGE>")) {
if(!skip) {
sBuf.append(aLine);
readed = true;
} else if(!skip){
sBuf.append(aLine);
if(!skip && readed) {
String tempStr = sBuf.toString();
if(tempStr.length() > 0) {
boolean reqMatched = false;
Matcher m = null;
if(initReq) {
m = initMessage.matcher(tempStr);
actName = "Intialization";
} else {
m = requestMessage.matcher(tempStr);
String time = "";
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
} else if(!initReq){
m = requestMessage1.matcher(tempStr);
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
if(time.length() > 0 ) {
try{
requestTime = sdf.parse(time).getTime();
}catch(Exception ex){}
System.out.println("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
                              //bw.write("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
                              String reqDataSize = dcf.format(((double)time.length()/1024.0))+"K" ;
                              rowReq = sheet.createRow((short)counter);
                                   rowReq.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)0).setCellValue("Request");
                                   rowReq.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)1).setCellValue(actName);
                                   rowReq.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)2).setCellValue(time);
                                   rowReq.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)3).setCellValue("");
                                   rowReq.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)4).setCellValue("");
                                   rowReq.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)5).setCellValue("");
                                   rowReq.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)6).setCellValue(reqDataSize);
                                   counter = counter +1;
                                   System.out.println("counter is "+counter);
                         Matcher l = sentMessage.matcher(tempStr);
                         Matcher k = rcvdMessage.matcher(tempStr);
               if(l.find()) {
                                        for (int i=1; i<=l.groupCount(); i++) {
     String groupStr2 = l.group(i);
try{
sentTime = sdf.parse(groupStr2).getTime();
}catch(Exception ex){}
                    if(k.find())
                                             for(int j=1;j<=k.groupCount(); j++) {
                                             String groupStr1 = k.group(j);
                                             try{
recdTime = sdf.parse(groupStr1).getTime();
}catch(Exception ex){}
                                             presentTime = (recdTime - sentTime);
                                             hasTime = hasTime + presentTime;
                                             hasCalls = hasCalls +1;
if(!reqMatched) {
if(initReq) {
m=initResIDMessage.matcher(tempStr);
} else {
m=responseMessage.matcher(tempStr);
if(m.find()) {
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
try{
responseTime = sdf.parse(groupStr).getTime();
}catch(Exception ex){}
                                             String resDataSize = dcf.format(((double)tempStr.length()/1024.0))+"K" ;
                                             rowRes = sheet.createRow((short)(counter));
                                             rowRes.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)0).setCellValue("Response");
                                             rowRes.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)1).setCellValue(actName);
                                             rowRes.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)2).setCellValue(groupStr);
                                             rowRes.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
                                             rowRes.createCell((short)3).setCellValue((responseTime - requestTime));
                                             rowRes.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
                                             rowRes.createCell((short)4).setCellValue(hasTime);
                                             rowRes.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
                                             rowRes.createCell((short)5).setCellValue(hasCalls);
                                             rowRes.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)6).setCellValue(resDataSize);
                                             hasTime = 0;
                                             hasCalls = 0;
                                             counter = counter + 1 ;
sBuf.setLength(0);
readed = false;
          wb.write(fileOut);
          } // End of for (int fileNo = 0; fileNo < children.length; fileNo++ )
}     //End of else
          fileOut.close();
} //End of public static void main
} // End of Class

First of all, use [code]-tags to make your code readable, please.
I didn't do a complete inspection of your code (because it's too much and unreadable as it is) and I don't know POI, but creating a new HSSFWorkbook for each input file sounds fishy to me ... try re-using the workbook and just creating a new sheet in each iteration.

When I downloaded the new Firefox about a week or two ago all my bookmarks, and add-ons disappeared and I want you to give them back to me asap?

When I downloaded the new Firefox about a week or two ago all my bookmarks, and add-ons disappeared and I want you to give them back to me asap?

You shouldn't wait that long to ask advice. Firefox only keeps a (rotating) backup of bookmarks for the last 5 days that you started Firefox. So you may be out of luck.
You can check that you still use your old default profile that had your bookmarks.<br />
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Lost_bookmarks
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
For the extension, see "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

CD/DVD drive does not read all DVD formats and regions

Hi
My Teac-dw-224e-a does not read all DVDs formats and regions.
It does read CDs but no DVDs at all.
Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
I have reinstalled the driver and also tried with different software.
What can I do?
Please help!

Hi
It is possible that your DVD drive has wrong region settings.
In this case it is not able to watch all possible DVD movies from different regions.
Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

TS1406 I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Can I use ICloud to store all my data and use it seamlessly with my devices and Mac?

Can I use ICloud to store all my data and use it seamlessly with my devices and Mac. I.E. I want to use it as I use my time capsule and get rid of all this stuff I have in my office.

Yes.
Apple - iCloud - Learn how to set up iCloud on all your devices

Query to get all ports assigned and used by EBS instance.

Hi,
Can some one pleaase help to get
Query to get all ports assigned and used by EBS instance.
Help is appreaciated.
Regards,
Milan

MILAN RATHOD wrote:
Hi,
Can some one pleaase help to get
Query to get all ports assigned and used by EBS instance.
Help is appreaciated.
Regards,
MilanIn addition to the thread referenced above by Helios, please check the context files and (Oracle E-Business Suite R12 Configuration in a DMZ [ID 380490.1] -- F. List of Ports to Open in a DMZ Configuration).
Thanks,
Hussein

Reading all related keys from a properties file

I have in my propeties file, keys the following way:
FIRST_DATASOURCE=COM.XYZ.ABCSERVER.JDBC1
SECOND_DATASOURCE=COM.ABC.SERVER2.JDBC1
FIRST_DATASOURCE=COM.123.SERVER3.JDBC3What is the solution to read all the keys wit _DATASOURCE and return as a string array?
Thanks in advance.

Thanks kajbj..
The problem here is the datasources are added from
time to time and the program should pick-up
dynamically.
If I hardcode for the existing available datasources,
how can it handle for the future?
Appreciate your thoughts.Many answer can be found by reading API
http://java.sun.com/j2se/1.4.2/docs/api/java/util/Properties.html#propertyNames()

LightScribe DVD±R/RW is no longer able to read all lightscribe discs(Blank/used)

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply. However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data CD/DVD-RLightScribe discs, I found that HP optical driver was unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
I was told 'I suspect the culprit might be hardware and lightscribe dive might be
corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-...'
Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
When clicking on drive 'duble-click', I found it opens like a USB FlashDrive or With a CD,DVD player, however, : Bare in mind that 'with CD/DVD Player' is grayed out)
Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
a USB FlashDrive or With a CD,DVD)::
My LightScribe System Software version is:
I've tried installed the latest version of lightscribe software, then I run
the diagnostic utility, however, the problem still persists.
My HP CD/DVD DVDآ±R/RW specs are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data of dignostic utlity
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the HP Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while my optical drive of my desktop was connected to the primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS. However, the optical drive was not. Th I tried clicking on it on BIOS and then clicking on 'enter' to try to let the device be re-recognized. However, that made no difference. I had to take part my computer ,and then reconnected the optical drive onto the secondary slave IDE , and let HDD connected to the same primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS
What is meant with with double Layer Support.
How much does it cost?

Sparkles1 wrote:
HI @cooperator
I understand that you are having an issue with your battery and the lightscribe drive. You would also like to know about DL(Dual Layer) support.
Here is a link to Troubleshooting the notebook battery to assist with the battery concern.
You asked what dual layer support is , here is a definition from webopedia for the explanation.
What is dual layer support
As you stated in your post your system supports reading
The DL refers to dual layer, it does not list a CD DL. What type of disk are you using?
From your post I noticed it does read the title of the disk but is unable to read the file.
Did you use any form of compression software when writing the files?
Would you try inserting a supported blank disk and writing to it. If you can do this and read the disk after your drive is functioning.
The only other way to check would be to remove and reinstall it into another computer to test if it works there.
Yes there is a bios update listed on the driver page for your notebook.
HP Pavilion dv6-6093ex Entertainment Notebook PC Drivers
Updating the bios does have a potential to cause damage, for this reason I suggest contacting HP support for assistance.
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
I hope this helps!
Thanks a lot,
I wish that Paul_Tikkanen could have participated in solving this issue since I know he has insight in such problems.
Could you please be a little bit patient with me and go through all my points below and answer me::
IF you had had a close look at my screen shots before, you would have seeing I have classified the disc haveing and not having the problem into three categories each of which has its screen shots under it.
Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal
Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like a USB FlashDrive or With a CD,DVD)::
First The kind of discs I have been used to using, and seeing in the market are only:
CD-R, C-RW, DVD-R, DVD+R, DVD-RW, DVD+RW.
However, I never ever used or saw 'CD-ROM, DVD-RAM, DVD-ROM CD-R DL, CD+R DL, DVD-R DL, DVD+R DL, CD-RW DL, CD+RW DL, DVD-RW DL, DVD+RW DL.
Thus, Could you please be a little more detailed about each of the above disc types?
Second: I don't know if I can see 'DVD+R DL' written on the cover of DVD like what I am accustomed to see 'DVD-R'?
Third: What difference is there between 'DVD-RW', and 'DVD-RW DL', and 'DVD-R' and 'DVD-R DL'?
Sparkles1 wrote:
HI @cooperator
From your post I noticed it does read the title of the disk but is unable to read the file.
Did you use any form of compression software when writing the files?
NOTE, those discs are for HP Factory Recovery Discs.I have created those Discs via HP Recovery Manager. After creating them, I have labelled them with lightscribe software. ALL LightScribe are not read well and are unknown. Thus, my answer for your question is No, I don't use compression software unless if the program 'HP Recovery Manager' used a compression built-in tool while creating those discs'
Moreover, I have even restored my laptop from the HP factory Recovery discs which means everything must have been OK
Sparkles1 wrote:
HI @cooperator
Would you try inserting a supported blank disk and writing to it. If you can do this and read the disk after your drive is functioning.
Have you seen my screen shots well?
The key of my problem as to unable to reading LightScribe is the answer of this question of mine: Why do I see 'RAW' or 'unknown' as a file system for disc inserted whenever I insert a ligthSribe disc into drive?
All Blank Or containing data CD/ DVD ±R/RW lightscirbe are unable to be read by optical drive. When clicking on drive 'duble-click', I found it opens like a USB FlashDrive or With a CD,DVD player, however, 'with CD/DVD Player' is grayed out) When I chose 'like a USB FlashDrive, I found there was no disc inserted, although it was.
If you mean other discs not LightScribe, then I would be saying YES. And they all worked well, except the lightscribe(Blank, or containing data) were not read well at all.(all are unknown).
Sparkles1 wrote:
HI @cooperator
The only other way to check would be to remove and reinstall it into another computer to test if it works there.
You mean I need to remove the optical drive and install on another laptop brand. If so, It would be compatible with any laptop brand?
NOTE: the reason around this problem is not lightscribe discs(I think) since any optical drive without having a lightscribe feature can read lightscribe discs. For instance the Dell laptop(Windows 7) could read all lightscribe disc or non lightscribe discs, even although it doesn't have any lightscribe feature, nor a disc recording software, except the Windows built-in default tools. Dell optical drive, although not having a lightscribe feature, read all discs no matter the disc type is. Thus, In my HP optical drive having a lightscribe feature, I have decided to get rid of (lightscribe feature by removing the lightscribe system software, and all Cyber DVD-Suite). However, the problem is still with reading lightscribe discs.
Sparkles1 wrote:
HI @cooperator
Yes there is a bios update listed on the driver page for your notebook.
HP Pavilion dv6-6093ex Entertainment Notebook PC Drivers
Updating the bios does have a potential to cause damage, for this reason I suggest contacting HP support for assistance.
Updating the BIOS
First:: I have updated my BIOS from F.05 into F.1B by using HP Notebook System BIOS Update (Intel Processors) (sp55068) F.1B hoping to get rid of this problem, but that made no difference at all.
NOTE
Other suggested that I insert an empty rewritable CD and try running the following command: format e: /fs:UDF
I did, but it didn't help.
Other suggested to download the latest version LightSribe system software, but I would be saying how to do that as long as HP would be phasing out HP LightScribe Direct Disc Labeling technology. HP will gradually transition products to comparable optical disc drives without LightScribe technology.
Second:: I've also been searching in HP forums, but always they said nonsense comments which I don't put up with. Take this one for example,
I'd be happy to do all I can to help with your lightscribe.Please note:Beginning May 2011 and throughout the year, HP will be phasing out HP LightScribe Direct Disc Labeling technology. HP will gradually transition products to comparable optical disc drives without LightScribe technology. While this transition may affect other HP products, this document is specific to HP notebooks.- Source
This might be helpful too; Creating disc labels with LightScribe
NOTE:Hewlett-Packard's LightScribe website is no longer active. LightScribe software and disc utilities
may be found on a number of public websites. Search the Internet for LightScribeto find these pages.
This blurb and much more information can be found in the following document; Creating Disc Labels with LightScribe
The compelet discussion is here.
Finally I would be saying that LightScribe website is no longer available(discontinued). As HP said. IF HP customer care couldn't help their customers, I think it would be better to completely discontinue selling HP products.

Can't save-All-relative files and don't see check_cs5.css under tab index.html

after closing check_cs5.css in the second tutorial I was suppose to get two tabs (source and check_cs5.css) which I could click on (underneath the index.html document tab). I don't see these. I can't get both the Design window AND the check_CS5.css code window. I only get the code for index.html and the design window. For some reason when I was suppose to save "all-relative-files" ... that was grayed out so I "saved ALL". I don't know why that was but it probably had something to do with the problem I just mentioned. This occurred near the end of tutorial 2 of the beginner tutorial.
Dave

This post seems to be the contuation of an earlier conversation but I don't know which earlier thread you're referring to.
Which tutorial are you doing?
Was this thread yours or someone totally different?
http://forums.adobe.com/thread/862565?tstart=0

Problem connecting (read only) to Sybase Server using Crystal XI

Hi,
I'm having a very similar problem to Renuha in the thread 'Problem connecting to Sybase Server using Crystal XI-Version-11.0.0.1994'
The thread is marked as assumed answered but I suspect not!
I am experiencing this issue in Crystal XI R1 11.0.0.2495, post SP4 install.
Though the issue was exactly the same pre SP4 install, when it was a vanilla install @ version 11.0.0.1282.
I am trying to connect to a Sybase database via Crystal > Start Page > Standard Report Wizard > Standard Report Creation Wizard > Sybase Server > Make New Connection
I enter the details, of my read only user account, and select my desired database, from the (successfully) populated 'Database' drop down.
After some time, in the 'Standard Report Creation Wizard' window I get the server listed under the Sybase Server branch, but, on expanding the server I only get '...no items found...'. However ,if I use the sa account, after selecting a particular database, I can see all the available database objects under the Sybase Server > [server] node.
I am on Windows XP Pro SP3, with Sybase Open Client v12.5.2
I assume my Sybase Open client is correctly installed as I am able to successfully connect using the sa account.
I am trying to connect to a Solaris 10 (5.10) system running Sybase @@version= Adaptive Server Enterprise/15.0.3/EBF 16548 ESD#1/P/Sun_svr4/OS 5.8/ase1503/268
Our database vendor/supplier has said:
"...Crystal reports is not handling the granularity of the Sybase revoke permissions and assuming we've revoked all access to any table where we have revoked only write access.
Is anyone able to assist?
Thanks,
Matt

Don,
Thanks again for the response and my apologies for the delay in reply - they keep giving me other work to do!!
Anyway.
CR XI R2 SP6 successfully installed.
Same outcome on Sybase connect, with a full read/write sa account
i.e. successfull connect and sight of all database objects within my chosen database.
Same outcome on my restricted read only account
i.e. I am able to successfully authenticate and choose which database I wish to select but subsequently, still, 'no items found' is displayed when I expand my database node.
I believe it is a problem with the read only account as both accounts are able to connect, as shown by the availablilty of the dropdown, listing the available databases within the specified Sybase instance.
The reasons for going down this path are as you suspect - I've been asked to provide access which is not full!
As far as the testing via test tbl creation.
I know very little of Sybase (?!) and all our Sybase DBA activities are carried out by our system/dB vendor/supplier.
To do further testing I would have to go back to our dB vendor/supplier but, as mentioned, (I get the impression) they already beleive they have carried out all required of them by providing locked down read only access.
I ought to mention that the database trying to be accessed is a restored copy of "the previous days" live data, on an MIS server. The read-only account comes over as with full privileges, and it is a script, subsequent to database restore, which knocks down the accounts privs, to read-only. Given this scenario what would I have to ask of them re further testing/troubleshooting?
Thanks,
Matt

Read all the groups and the OU's into my code

dears
i want to read all the group names that are under a certain Organization Unit into my code
how to achevie this
for example
a as string []
a = readAllGroups()
Help please?!

I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy.

Reading all files on directory using "utl_file" package...

I need to read all files in directory via PL/SQL. I don't know
name files (are data dynamics create for automation system),
only I know your extensions.
Can I do this using the package "utl_file" or I need to create
program in another language (C, C++, for example)?
Any ideas...
Thanks.

Hi,
you can't do that with the UTL_FILE package (it can't retrieve
file names).
A very simple solution would be, if you created on OS-level a
file which contains the filenames of directory and then read this
file using UTL_FILE. With the information on all file names you
can enter a loop which opens and reads all files again using
UTL_FILE.
A more mundane solution could be to use the features on the iFS.
Cheers
Gerald

About T410S frezze problem.(I read all relate topic and using latest drivers)

Similar Messages

Maybe you are looking for