About test
Hai,
ide:NetBeans 5.5
server:SunApplicationServer
I developed the webservice .In this no errors when i am testing the webservice it gives the error like Service Class Not Generated
why it is giving like that .
If you know please send the reply as early as possible
if i used Netbeans 5.5 beta version it is not giving any error(means it gives the result)
Thanks,
Radhi.
Hi
After the data is loaded for the datasource to the respective targets (ODS or Cubes)
Step 1
After loading , go to Ecc type T code RSA3 . here give the datasource name
Step 2
Execute press F8 ( increase Data Records / Calls by 1000 and Display Extr. Calls by 100)
Step3
Now you will find the number of records which is there in ECC. Note down the number
Step 4
Log on to the Bw system , RSA1----> go to the cube ---> right click on it and manage
Step 5
Find the number of records added and transfered , if both are same then you ecc records and Bw records are matching
in case if the records are not same check make sure that your start routine and field routins are corrected.
hope this helps
santosh
Similar Messages
-
''locking - dupe of https://support.mozilla.org/en-US/questions/976623''
there is an icon in the upper right hand corner about test your internet connection speed. is this malwareCan you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Got an e-mail from Apple Software Customer Seeding about testing software-is it for real?
I recently received an email about testing pre-release software from Apple Software Customer Seeding.
It's asking me to log in with my ID and accept a confidentiality agreement. Is this a scam?Actually, I was surprised to find this email in my inbox this morning, on a US holiday, sent from the Pacific Time Zone at 7 a.m.!
I don't even have Lion installed, so the only reason I can think they are interested in my opinion was due to my public criticism of Lion and the cost of upgrading software (over $5000 in my case, being in the print and design industry) just to take advantage of the iOS-flavored features.
Suspicious of its offer, I viewed the email in "Source" (yes, I still use the much-stable Office 2004 with Entourage) and was able to see "who" really sent the email (someone with ties with Apple, but based on her Facebook profile, I think she's an outsource ... Quiltmaking seems to be her thing!)....
Then I came to the Apple Discussions and saw not one, but two discussions about this possible spam/phishing letter. So, yes, it turns out to be real, but again, my initial thought was this was Apple's way of silencing one of their critics.
Yes, conspiracy theories abound when the company you love and love to hate is so secretive (gosh, they can even get the SF Police to cooperate in searching someone's house!). -
Hi,
will you please provide some document about testing for BI datawarehouse?
Many thanks,
FrankHi Frank,
Check this thread:
BI Upgradation-Tests
Testing
SAP BI 7.0/ BW Testing
Also, there are some testing tools available:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/c96642804a173be10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/cc/9e138e14ae11d2bd11080009b4534c/frameset.htm
Hope this helps you..!
-Pradnya -
I want know about test scripts
hi every one
i want know about test scrips and in real time what i had done the customized data what we havt to test,please tell me any one
thanking youHi Muttus,
Please follow th below link which will throw light on this.
http://help.sap.com/saphelp_erp2004/helpdata/en/39/2f333bf40bc633e10000000a114084/content.htm
regards,
Chitnan Joshi. -
About Test (webservices)
Hai,
ide:NetBeans 5.5
server:SunApplicationServer
I developed the webservice .In this no errors when i am testing the webservice it gives the error like Service Class Not Generated
why it is giving like that .
If you know please send the reply as early as possible
if i used Netbeans 5.5 beta version it is not giving any error(means it gives the result)
Thanks,
Radhi.can anyone help me about that?
-
{color:#0000ff}Hi Team
Can any one help me regarding testing process in D2k,
My client ask about testcase and i know some testcase like
1
checking GUI format and
Checkign LOV
but this are very simple format....
plz share the format
My mail id is [email protected]
Advance Thanks
{color}
Edited by: User01515 on Oct 20, 2008 10:52 PMNo problem. What are you willing to pay?
-
Hi i am doing the project in core java with threading concept.I need to test my product.Can anyone give the idea about the testing tools in java and also about the testing process.
Hi i am doing the project in core java with threading concept.I need to test my product.Can anyone give the idea about the testing tools in java and also about the testing process.
-
About test a web dynpro application
Hi, experts
When i test a web dynpro application, the IE
web page constantly refresh.
Who encounter this issue?
This is a very strange problem.which IE are you running?
Internet Explorer 5.5 or higher or Firefox 1.0 or higher, will work
Mine is Internet Explorer 6.0, sp2 working fine.
No Support for '_' in Host Names
The browser does not accept cookies if a host name contains the underscore character '_'.
Since Microsoft Internet Explorer 6.0 and MS Internet Explorer 5.5 including security patch MS01-055 cannot accept any domain names with underscore characters, session cookies cannot be saved. This will result in terminations when navigating within a Web application.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Abhi -
AutoDiscover is a new feature in Exchange 2007, to provide access to Microsoft Exchange features (OAB, Availability service, UM) for Outlook 2007
clients or later.
We can determine whether problems related to AutoDiscover via OWA.
For example:
OOF is not working in Outlook Client but it is working in OWA.
When we realized this issue is not related to Outlook Client side and network side after performing some troubleshooting steps, it should be something
abnormal on AutoDiscover.
There is a common tool to check AutoDiscover in Outlook, Test E-mail AutoConfiguration.
Today, we will introduce AutoDisocver and “Test E-mail AutoConfiguration” in details. Hope it is helpful for AutoDiscover troubleshooting and self-learning.
1. Differences between “Test E-mail AutoConfiguration” and other tools
The “Test-OutlookWebServices” cmdlet allows us to test the functionality of the following services:
Autodisocver
Exchange Web Services
Availability Service
Offline Address Book
When we run “Test-OutlookWebServices”, it returns all the web services’ states.
However, some information are useless for some scenarios.
For example:
We just want our Exchange 2010 Server working internally. So it is unnecessary to enable Outlook Anywhere.
However, when we run “Test-OutlookWebServices”, it returns Outlook Anywhere errors because the Outlook Anywhere does not need to been enabled.
In contrast, using “Test E-mail Autodiscover” is more intuitive.
If there is any problems, it will return error code from the test result, like 0x8004010F etc. We can do some research from TechNet articles or MS
KBs.
Although it is difficult to say where the specific problem is just via the error codes, we can combine with IIS logs to perform troubleshooting and
find the root of problem.
2. How to use “Test E-mail AutoConfiguration” Tool
a. Open Outlook, we can find there is an Outlook Icon at the right bottom of System tray. Holding down “Ctrl” button and right click the Outlook Icon, we will see “Test E-mail
AutoConfiguration” option. Please see Figure 01.
Figure 01
b. Click “Test E-mail AutoCofiguration” and input user name, uncheck the “Use Guessmart” and “Secure Guessmart Authentication” checkboxes, then click “Test”. Please see
Figure 02.
Figure 02
c. “Test E-mail AutoConfiguration” result panel and log panel. Please see Figure 03 and Figure 04.
Figure 03
Figure 04
3. How to understand “Test E-mail AutoConfiguration” result
According to the Figure 03, we found there are many URLs in the “Test E-mail AutoConfiguration” result panel. Let us understand the details of these
URLs.
If we these URLs are not the correct ones, we can re-setting or re-creating them via commands.
- Internal OWA URL:
https://vamwan310.vamwan.com/owa/
OWA internal access.
- External OWA URL:
https://mail.vamwan.com/owa/
OWA external access.
- Availability service URL:
https://vamwan310.vamwan.com/EWS/Exchange.asmx
Free/Busy, OOF and meeting suggestions.
- OOF URL:
https://vamwan310.vamwan.com/EWS/Exchange.asmx
Out of Office access.
- OAB URL:
https://vamwan310.vamwan.com/OAB/023ef307-b18a-4911-a52c-de26700f6173/
OAB access.
- Exchange Control Panel URL:
https://vamwan310.vamwan.com/ecp/
ECP access.
4. AutoDiscover Tips
- AutoDiscover Service itself is a web application running on the AutoDiscover virtual directory (not a server service) designed to provide connection information to various
clients.
- The AutoDiscover service is automatically installed and configured when CAS role is added to any Exchange Server.
- AutoDisocver virtual directory is created in IIS within the Default Web Site.
- A Sercive-Connection-Point (SCP) object is created in AD.
- The SCP contains a URL to the AutoDiscover service. This is for intranet clients so they do not have to use DNS to locate the AutoDiscover service.
- In AD this object is located at the following location:
DC=<domain>, CN=Configuration, CN=Services, CN=Microsoft Exchange, CN=First Organization, CN=Administrative Groups, CN=Exchange Administrative
Group, CN=Servers, CN=<CAS Name>, CN=Protocols, CN=AutoDiscover, CN=<CAS Name>
- Setup creates the AutoDiscover URL based on the following structure:
<CASNetbiosName>.domain.com/AutoDiscover/AutoDiscover.xml
If a PKI certificate is not already present, a self-signed certificate is installed on the Default Web Site.
To help allow this certificate pass the Issues to test it is set up with a Subject Alternative Name containing urls.
If a PKI certificate is present, that certificate is utilized and configured for use in IIS.
The Outlook Provider is used to configure separate settings for the Exchange PRC protocol (internal to network), Outlook Anywhere (Exchange HTTP protocol), and WEB:
EXCH, EXPR, WEB
The
EXCH and EXPR setting are vital for the proper configuration of Outlook.
5. AutoDiscover Workflow
General Process flow:
There are various components surrounding the AutoDiscover Service and all are necessary to complete a request. Including IIS, AutoDiscover service
itself, the provider, and AD.
a.
Client constructs service URL and submits Autodiscover Request. First attempt to locate the SCP object in AD. So, DNS is not needed.
b.
IIS Authenticates User.
c.
Is the Autodiscover service in the appropriate forest?
+ If YES.
1)
Parse/Validate Request
2)
Is there a provider that can service the Request?
++ If YES
a)
Config provider processes request and returns config settings.
b)
Return config setting to client
++ If NO
Inform client we cannot process request
+ If NO.
Redirect client to Autodiscover service in the appropriate forest.
Methods to find Autodiscover services: SCP and DNS
Domain-joined
a. Find SCP first.
The SCP contains the URL to the AutoDiscover service.
URL: https://CAS01.contoso.com(CAS’ FQDN)/AutoDiscover/AutoDiscover.xml
If more than one SCP object is found in AD (it means there are multiple CAS servers in the Exchange organization), Outlook client will choose one of the SCP entries that
are in the same site to obtain the AutoDisocover URL.
b. If we cannot find SCP object, then Outlook client will use DNS to locate AutoDiscover.
Outlook parses out the domain (SMTP suffix) via your EmaiAddress, then attempts to connect to the predetermined order of URLs via the suffix.
For example: If my email address is
[email protected]
Outlook tries POST commands to the following order of URLs:
https://contoso.com/autodiscover/autodiscover.xml
https://autodiscover.contoso.com/autodiscover/autodiscover.xml
NOTE: The URLs above is by design, hardcode
and cannot be changed.
c.
If those fail, Outlook tries a simple redirect to another URLs in IIS:
http://contoso.com/autodiscover/autodiscover.xml
http://autodiscover.contoso.com/autodiscover/autodiscover.xml
If none of these URLs work then DNS is most likely not set up correctly.
We can test that by pinging one of the above URLs.
If that is successful, we must ensure the URLs contoso.com or autodiscover.contoso.com are actually pointing to the CAS server.
If the ping fails then there is a chance that DNS is not set up correctly so be sure to check that the URLs are even registered.
NOTE: If contoso.com is a non-CAS server,
we should add a Host record with just AutoDiscover. And point that entry to your CAS server that is running AutoDiscover.
d.
If still failed, we can use DNS SRV lookup for _autodiscover._tcp.contoso.com, then “CAS01.contoso.com” returned. Outlook will ask permission from the user to continue
with AutoDiscover to post to https://CAS01.contoso.com/autodiscover/autodiscover.xml
Non-Domain-joined
It first tries to locate the Autodiscover service by looking up the SCP object in AD. However the client is unable to contact AD, it tries to locate
the Autodiscover service by using DNS.
Then, same as step b, c, d in
Domain-joined scenario.
6. How to change the AutoDiscover
service location order forcibly?
By default, Outlook client locates AutoDiscover service in that order above.
We can also change the order forcibly.
a.
If we want to locate AutoDiscover service via one of the autodiscover URLs, please running following command in EMS:
Set-ClientAccessServer -identity <servername> -AutodiscoverServiceInternalUri https://autodiscover.contoso.com/autodiscover/autodiscover.xml(URL
that you want)
b. If we want to locate AutoDiscover service via
SRV record, please follows this KB to set up SRV:
http://support.microsoft.com/kb/940881
7. How to check AutoDiscover Healthy
a. We should make sure the AutoDiscover
is healthy before using AutoDiscover to perform troubleshooting.
b.
We can browse following URL in IE explorer:
https://autodiscover.vamwan.com/autodiscover/autodiscover.xml
If it returns “code 600”, that means AutoDiscover is healthy.
Screenshot as below:
c. AutoDiscover itself returns errors to the requesting client if the incoming request does not contain the appropriate information to complete a
request.
The following table explains the possible errors that could be returned.
Error Value
Description
600
Mailbox not found and a referral could not be generated.
601
Address supplied is not a mailbox. The provided email address is not something a client can connect to. It could
be a group or public folder.
602
Active Directory error.
603
Others.
The 600 “Invalid Request” error is returned because a user name was not passed to the service. That is OK for this test because this does confirm
the service is running and accepting requests.
d.
If AutoDiscover service is not working well, I suggest re-building the AutoDiscover Virtual Directory for testing.
Steps as below:
1) Running following command in EMS to remove the AutoDiscover VD (we cannot delete it via EMC):
Remove-AutodiscoverVirtualDirectory -Identity "CAS01\autodiscover(autodiscover.contoso.com)"
Please refer:
http://technet.microsoft.com/en-us/library/bb124113(v=exchg.141).aspx
2)
Running following command in EMS to verify whether we have removed the AutoDisocver VD successfully:
Get-AutodiscoverVirtualDirectory | FL
Please refer:
http://technet.microsoft.com/en-us/library/aa996819(v=exchg.141).aspx
3)
Running following command in EMS to re-creating a new AutoDiscover VD:
New-AutodiscoverVirtualDirectory -Websitename <websitename> -BasicAuthentication:$true -WindowsAuthentication:$true
Please refer:
http://technet.microsoft.com/en-us/library/aa996418(v=exchg.141).aspx
8. Common issues
a. Outlook Disconnection
Issue and Troubleshooting
Issue:
Sometimes the Outlook clients cannot connect to the Exchange server after migrating to a new Exchange server or changing to new CAS. The Outlook clients
always connect to the old CAS server.
Troubleshooting:
To solve this issue, we should change the SCP via following command:
Set-ClientAccessServer -Identity
<var>CAS_Server_Name</var> -AutodiscoverServiceInternalUri
https://mail.contoso.com(newCAS’FQDN)/autodiscover/autodiscover.xml
b. Autodiscover
Certificate issue
Tips on Certificate:
Exchange requires a certificate to run an SSL protocol such as HTTPS. We can use the certificate that supports subject alternate names (SAN) in Exchange.
This is to allow the certificate to support resources that have different names, such as Outlook Anywhere and the Autodisocver Web application.
Issue and Troubleshooting
Issue:
We receiver the Certificate Principal Mismatch error when we use a SAN certificate.
Troubleshooting:
1) Please determine the FQDN that the client
uses to access the resource. Steps as below:
OutlookàToolsàAccount
SettingsàE-mailàclick
the Exchange accountàChangeàMore
SettingsàConnectionàExchange
Proxy Settingsànote the FQND that list in the
Only connect to proxy servers that have this principal name in their certificate box.
2)
Please using EMS to determine the value for the CerPrincipalName attribute: Get-OutlookProvider
This command returns the result for the EXPR name.
3)
Please re-setting the CertPrincipalName attribute to match the FQDN via following command:
Set-OutlookProvider EXPR –CertPrincipalName: “msstd:<FQDN the certificate is issued to>”
9. Resource for reference:
Autodiscover and Exchange 2007
http://technet.microsoft.com/en-us/library/bb232838(v=exchg.80).aspx
White Paper: Understanding the Exchange 2010 Autodiscover Service
http://technet.microsoft.com/en-us/library/jj591328(v=exchg.141).aspx
Certificate Principal Mismatch
http://technet.microsoft.com/en-us/library/aa998424(v=exchg.80).aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.HI,
I get following? when run the test? user is login to Domain A but accessing exchange in Domain B? -
Question about Test Form Builder
Can someone validate my understanding?
I have an application view which has one service. The parameters for
adding a service is the service name,desc, input schema and output schema.
Now I want to test the service after deploying it.
My understanding is the TestFormBuilder.java will construct the test form
based on the
input schema i defined for the service. Is this correct?
Thanks in advance.Kishore,
TestFormBuilder.java does build the test form, but only for the DBMS adapter.
This class is an example of how you would do this for your Adapter specific
service parameters. It is too error prone to make TestFormBuilder generic
enough for all potential adapters.
Cheers,
Chris
Kishore R wrote:
Can someone validate my understanding?
I have an application view which has one service. The parameters for
adding a service is the service name,desc, input schema and output schema.
Now I want to test the service after deploying it.
My understanding is the TestFormBuilder.java will construct the test form
based on the
input schema i defined for the service. Is this correct?
Thanks in advance. -
Confused about testing/firefox dependencies [SOLVED]
In trying to install firefox-3.6.2 from testing, I get a message saying that there's a dependency conflict with fontconfig-ubuntu, which I installed some time ago in an attempt to improve my screen fonts.
When i check the explicit dependencies for firefox-3.6.2 in testing, I see only desktop-file-utils and xulrunner. When I check the dependencies for those two packages (desktop-file-utils in extra and xulrunner in testing), I still don't see mention of fontconfig.
Is there a way to work around this? I'd rather not undo my font display configuration just to test the current version of firefox, but I would rather use a firefox package for 3.6 than the mozilla.org package.
Thanks for any advice.
Last edited by dhave (2010-01-25 04:08:33)Thanks very much for the advice. One question, though. If
wonder wrote:better update fontconfig-ubuntu to the latest version. WARNING. you have to rebuild yourself cairo-ubuntu to link against libpng 1.4.0 if you don't do that you'll have a broken system.
is "A" and
better revert to stock and after the upgrade is complete, use *-ubuntu again.
is "B",
are you recommending A or B? -
Some question about Test Stand
First question
1. I want to remove the path witch appears in each report file (MainSequence)
2. Other question it is regarding the Include limits in report file or not. I my project I need to change during execution this property.
It is possible to change this property during execution, if Yes please send me an example.
Thank you,The step that adds the sequencefile path is named “Add Sequence Name”, in the “Main” stepgroup, of the sequence “AddSequenceResultToReport”, in the sequencefile “reportgen_html.seq”. It can be found in the same folder as the default process models. Either remove the step or set its Run Mode to “Skipped”. This is the case if you are using html reporting (you should be able to find a similar step in the corresponding sequencefiles of the other two report types). Also, you must have chosen in your Report Options to use Sequence instead of DLL for the reporting.
The limits for any step should be a part of your Context container. There are many different places where they reside within that container as different properties depending on which step is currently executing. The easiest way is to change their value for their own step. Just use a pre- or post- expression to change the value of Step.Result.Limits.high (or low). If you are changing the limits of a step from another step within the same sequencefile, you might use a lookup string that looks like this: RunState.SequenceFile.Data.Seq["MainSequence"].Main["Numeric Limit Test"].Limits.Low.
I hope that you find the answers to these two questions helpful. You should have all of the information that you need to accomplish these two tasks. Take care and good luck!
Regards,
Aaron B.
National Instruments -
Hi, all
I'm doing some test that involves alert popup windows. During the test the button's click event is dispatched and an alert window is poped up to confirm the operation. The program will not proceed unless the "OK" button of the alert window is clicked. However I can't find the reference to the alert window and the button on it. Can someone give me some hint, please. Thanks alot~
spt.Ideally the code should expose the Alert instance that was created so
the test could access it. If that isn't possible Alert instances are
managed by the PopUpManager, which if you muck with the instance's
mx_internal popupInfo you could get a reference to the Alert.
-- Daniel R. <[email protected]> http://danielr.neophi.com/
On Mon, Aug 23, 2010 at 6:55 AM, sotestspacetimeriskind -
Unit testing or integration testing?
Here it says that this example is more of an explanation of framework than best practice because of the conflation of integration/unit testing concepts: http://docs.flexunit.org/index.php?title=Using_Asynchronous_Startup
My question is, how do you define a line here between unit testing and integration testing? What kind of UI components asynchronous tests are then considered to be unit tests and not yet integration tests? Many books recommend having 100% code coverage with unit tests. How would this example look like, to be considered only a unit test and not integration test?The question about which levels of testing to do are really dependent upon you. Let me explain a bit more.
If you are building an application, and only an application, then functional testing probably covers most of your needs. In an application environment, you have a relatively narrow pathway of options and interactions that a user might follow. So long as you test those options well, your app will probably work as well.
Where I see the real value of unit testing is testing for the unknowns. If you have a class that will be used in multiple applications in multiple ways, or perhaps it is intended to be a reusable class where others in your organization will use it in the future, then you want lower level testing. You want to have the best coverage you can because you want to know that, regardless of the way someone chooses to use the code, it will likely function or at least fail gracefully.
The same is true for integration. If I am creating a Flex component, then I can unit test part of it, but not all. So, I want to use integration tests to ensure that it works in as many circumstance as possible. Further, Flex components have a life cycle, so testing them when they are not on the display list isn't really a valid test..
So, to summarize, I see unit and integration w/Flex about testing possibilities and trying to achieve realistic code coverage for known and possible use cases. I see functional testing as testing those components in very specific use cases.
Which do you need? Depends. Are you developing reusable components across (n) projects, likely the first 2 and maybe the last. Are you an application developer testing that an application works in documented business cases? Just functional will likely work.
Hope that helps,
Mike
Maybe you are looking for
-
I connect my intel mac mini to my widescreen monitor through a mini dvi to vga adapter, bought at an apple store. This use to show correct diplay settings and I used 1440x900. About a month ago there was an update and now I cant see the option for 14
-
How to load data from text.txt fiel and tokenize it into JCombo box???
Hi Everyone, I am new to Java and Netbeans. I am working on the same GUI project and need your Help!! I have two queries and since i am new,please if possible explain step by step 1.) How can I load the contents of data stored in sometext.txt file wh
-
Nvidia card giving me same trouble as Ati card
Okay, originally I was using a Radeon 9500 Pro video card. The problem was that anything OGL accelerated completely froze my system; I couldn't run glxgears without it freezing. I tried and tried and tried to find a solution to the problem, using t
-
MultiMapping: Varialbe file name
Hi, I am using multimapping with 3 target message types. For each message type a file needs to be created. Is it possible to use variable substitution for generating different file names for each message type? For example, I am using MT1,MT2 and MT3
-
How to install both solution manager and ECC Development
Hi All, Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup. Pls let me know. Regards, Karthik