About the abap

hi,
i need the basic report and interactive report in abap..... along with validation........

Sorry Thomas.... I don´t!

Similar Messages

[newbie] about the ABAP trial

Hi all,
I have some little questions about ABAP trial that must sound like newbie questions ( that's why I tagged the title like that).
I would like to know if the trial contain all I need to train in ABAP devlopment such as workbench, sm30, Data Dictionnay, and tools needed to be efficient as an abap technical consultant ?
My second question is about the time limit of the licence ?
IS there a restriction or can I use it as lon as I wish ?
The goal for me is to learn technical points to improve my skills and I have no opprotunities to do it daily in my work.
Thanks a lot for help,
Regards
Morgan

Hi Morgan. Yes, the NetWeaver Sneak Preview system includes everything that you need to learn ABAP, it includes everything on the technology layer, so you will be good to go. The license is good for 90 days, but it can be renewed indefinitly every 90 days, so a couple days before your 90 days is up, simply go get another licence and apply it.
Regards,
RIch Heilman

Query About the SAP ABAP Module

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

The question about the HA installation on ECC6.0

Hi Experts,
We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation.
In the guide document, I got the following steps to process for realizing the HA of ECC6.0:
1. Run SAPinst to install the central services instance (ASCS) using the virtual host name on the primary cluster node, host A.
2. Prepare the standby node, host B, making sure that it meets the hardware and software requirements and it has all the necessary file systems, mount points, and (if required) Network File System (NFS), as described in Preparing for Switchover .
3. Set up the user environment on the standby node, host B. For more information, see Creating Operating System Users and Groups Manually. Make sure thatyou use the same user and group IDs as on the primary node. Create the home directories of users and copy all files from the home directory of the primary node.
4. Configure the switchover software and test that switchover functions correctly.
5. Install the database instance on the primary node, host A.
6. Install the central instance with SAPinst on the primary node, host A.
7.If required, install additional dialog instances with SAPinst to replicate the SAP system services that are not a SPOF. These nodes do not need to be part of the cluster.
My Question is that does standby node(host B in above context) need to install the ASCS, database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when the primary cluster node (Host A in above context) totally crash, such as power failure.

Hi Rong,
I would try to explain it in simple words...
My Question is that does standby node(host B in above context) need to install the ASCS,
database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when
the primary cluster node (Host A in above context) totally crash, such as power failure.
1. You don't need to install ASCS on Node B. You are installing it using a VIRTUAL HOSTNAME which represent cluster not individual node. VIRTUAL HOSTNAME is assigned to cluster package, so whichever Node is the owner of the package, will have the VIRTUAL HOSTNAME. (it will switch with cluster switchover)
2. It is actually a cluster package configuration magic. When Node A is active, cluster package owner is Node A. So all mount points (which is on SAN disk) is mounted on Node A. When you switchover the cluster, those packages will be mounted on Node B.
Some time single cluster package is used (which includes mount points for SAP instance + Database directories). You can also use 2 cluster package seperating SAP and Database directory structure.
Only OS related directories should be on servers local disk. All other application related mount points should be on SAN disk which is configured in "Cluster Package". (For example /sapmnt, /usr/sap, /oracle etc.)
You only need identical users and their enviornment settings on both Nodes.
In simple words, When primary node fails or crashed only users and thier enviornment setting will be lost. On second node, because of identical users and their profiles, same settings will be available to bring up the SAP system. Your all SAP and Database data is intact as it is on SAN Disk.
I hope, your confusion is cleared now...
Regards.
Rajesh Narkhede

Need info about c_taw12 abap certification exam

Hi All,
I have 3 years of experience in SAP ABPA and i would like to write the ABAP c_taw12 exam. Can any body please let me know what is producer to apply? What are the exam criteria (mean experience)? Please provide me more detail information about the ABAP certification exam.
Thanks in advance!
Regards,
Kannan

<b>http://www.sap.com/asia/services/education/centres/index.epx</b>
You can contact the education center nearest to ur location, they would guide you how to apply.
They generally ask for 1 year working expereince in the company from which u r applying, but its not mandatory. If u r company sponsred, then no such pre-requisites.
If u have 3 years exp in ABAP then clearing the certification wont be that tough, just follow the 5 books that SAP provides. The certification tests the conceptual knowledge of the candidate.
<b>Hope this is helpful.</b>

About send TCP package to other server program with the ABAP

I have a server program, it receipt the tcp data package,then process,then return the result with tcp package.
the data come from the sap system.
for example, the material master record.
I can use the abap to get the data,but i have no idea to send the data to server progam and receipt the result.
How to do it? Who can help me.Thanks a lot.
Best regards.
LnSinco.

> As an experiment, I tried going the other way. That it, I started up the
> Simple Data Server VI on the Windows PC. I then "pointed" my SGI client at
> the server on the PC. It works, ... sort of. I am getting an
> appropriately sized list of numbers displayed on the SGI host, but while
> most look like floating point values, some look like VERY large integers.
>
> I believe I have a data representation problem. That is, I don't know if I
> should expect to send (server-side) or see (client-side) C programming
> variables of type 4-byte floats, 8 byte doubles, or something else. Also, I
> am not certain how many values I should expect to send/see in each message.
> I think the default for the Simple Data Client/Server programs is 200
> points
, but I am not sure what that really means, either.
>
By default, LV converts all of the datatypes to be in big endian form.
I'm not sure about your SGI, but if it is a little endian machine, then
that will cause problems. If that is the case, you will want to swap
the words and bytes of the four byte values.
To debug this more easily, you might just make sure you send over very
predictable data such as 0, 1, 2, 3, etc. Lots of times these are
tested with random data, but that makes it pretty hard to see a pattern
when the data is wrong.
Greg McKaskle

SAP paging overflow when storing data in the ABAP/4 memory.

I am trying to create a data source in BI7.0 in the Datawarehousing Workbench. But along the process when i need to select a view i get an error detailed in the following error file extract: Please go through and assist.
untime Errors MEMORY_NO_MORE_PAGING
Date and Time 06.06.2009 14:21:35
Short text
SAP paging overflow when storing data in the ABAP/4 memory.
What happened?
The current program requested storage space from the SAP paging area,
but this request could not be fulfilled.
of this area in the SAP system profile.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The ABAP/4 runtime system and the ABAP/4 compiler use a common
interface to store different types of data in different parts of
the SAP paging area. This data includes the
ABAP/4 memory (EXPORT TO MEMORY), the SUBMIT REPORT parameters,
CALL DIALOG and CALL TRANSACTION USING, as well as internally defined
macros (specified with DEFINE).
To store further data in the SAP paging area, you attempted to
allocate a new SAP paging block, but no more blocks were
available.
When the SAP paging overflow occurred, the ABAP/4 memory contained
entries for 20 of different IDs.
Please note:
To facilitate error handling, the ABAP/4 memory was
deleted.
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 8176
Extended memory (EM)........... 13587912
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 40960
Maximum address space.......... " "
By calling Transaction SM04 and choosing 'Goto' -> 'Block list',
you can display an overview of the current roll and paging memory
levels resulting from active users and their transactions. Try to
decide from this whether another program requires a lot of memory
space (perhaps too much).
The system log contains more detailed information about the
termination. Check for any unwanted recursion.
Determine whether the error also occurs with small volumes of
data. Check the profile (parameter "rdisp/PG_MAXFS", see
Installation Guidelines).
Is the disk or the file system that contains the paging file
full to the extent that it cannot be increased, although it has
not yet reached the size defined in the profile? Is the
operating system configured to accommodate files of such a
size?
The ABAP processor stores different types of data in the SAP
paging area. These include:
(1) Data clusters (EXPORT ... TO MEMORY ...)
(2) Parameters for calling programs (SUBMIT REPORT ...),
Dialog modules (CALL DIALOG ...) and transactions
(CALL TRANSACTION USING ...)
(3) Internally defined program macros (DEFINE ...)
Accordingly, you should check the relevant statements in a program
that results in an overflow of the SAP paging area.
It is critical when many internal tables, possibly with
different IDs, are written to memory (EXPORT).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MEMORY_NO_MORE_PAGING" " "
"SAPLWDTM" or "LWDTMU20"
"TABC_ACTIVATE_AND_UPDATE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.

Hi Huggins,
Maintenance of the Paging File is owned by your basis team.
They should increase this in order for your transaction to process successfully.
Just for your reference, in case the OS used is windows server 2003, paging file value can be checked through;
Right click in the My Computer>properties.
Then go to Advance tab;
Then there should be a performance section, click the settings
Then Advance tab again. The paging file can be seen from there.
(and can be adjusted from there also)
The value of the paging file in general will be dependent with the available RAM from the hardware.
Hope this helps. Thanks a lot.
- Jeff

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Termination occurred in the ABAP program "RK2APA00_POST" - in

Hi everybody...I have a cancelled job when run only in applications servers , I see a dump "message typeX" , but when job run in Central Instance not cancelled and finish ok.
The name Job is Zcupon and attach to continue dump info , sorry for extended but I want send all information possible.
know if you can add a file with the abstract and not have to paste the text of the dump, thanks for the help they can deliver.
Regards....Freddy Solar....
Errores tiempo ejec.   MESSAGE_TYPE_X
Fecha y hora           18.11.2008 06:35:30
Texto breve
The current application triggered a termination with a short dump.
¿Qué ha sucedido?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Anál.errores
Short text of error message:
RFC_ERROR 4 Conversation 93690218 not found / CPIC-CALL: 'ThSA
Technical information about the message:
Message classe...... "KE"
Number.............. 628
Variable 1.......... "RFC_ERROR"
Variable 2.......... 4
Variable 3.......... "Conversation 93690218 not found / CPIC-CALL: 'ThSA"
Variable 4.......... " "
Last error logged in SAP kernel
Component............ "SAP-Gateway"
Place................ "SAP-Gateway on host SCPAPP1 / sapgw03"
Version.............. 2
Error code........... 728
Error text........... "Conversation 93690218 not found"
Description.......... " "
System call.......... " "
Module............... "gwxxrd.c"
Line................. 6156
The error reported by the operating system is:
Error number..... " "
Error text....... " "
Notas para corregir errores
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"RK2APA00_POST" "MESSAGE_TYPE_X"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Entorno sistema
SAP-Release 700
Application server... "SCPAPP1"
Network address...... "10.1.40.130"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "BALTICO"
Database type..... "DB400"
Database name..... "SCP"
Database user ID.. "R3SCPDATA"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jun 30 2008 00:10:07"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "DB4_53"
Patch level. 167
Patch text.. " "
Database............. "V5R3, V5R4, V6R1"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 159213920
Heap.... 0
Page.... 5660672
MM Used. 145143664
MM Free. 5680112
Usuario y transacción
Client.............. 400
User................ "ZUSRTARJETAS"
Language key........ "S"
Transaction......... " "
Program............. "RK2APA00_POST"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Info posición de cancelación
Termination occurred in the ABAP program "RK2APA00_POST" - in
"INSERT_CE4_FLUSH_BUFFERS".
The main program was "ZVI_CUPON ".
In the source code you have the termination point in line 100
of the (Include) program "RKEVRK2A_POST_COMMIT__FIX".
The program "RK2APA00_POST" was started as a background job.
Job Name....... "ZCUPON"
Job Initiator.. "ZUSRTARJETAS"
Job Number..... 02044200
Detalle código fuente
Lín.
Txt.fte.
70
subrc = sy-subrc.
71
CLEAR: g_t_ce4a_dbbuf[], g_t_ce4_dbbuf[].
72
73
case subrc.
74
when 1.
75
    Records were to be inserted into the acct.ref. table CE4xxxx_ACCT
76
    but the acct. reference numbers were already occupied. Most likely
77
    This problem is due to a explicit or implicit change to the
78
    number range COPA_OBJ (subobject is the operating concern)
79
    e.g. caused by illegally transporting the contents of CO-PA
80
    transaction data table contents (CE4xxxx / CE4xxxx_ACCT).
81
    Please check OSS for notes with keywords RKEVRK2A_POST, KF216
82
    and CE4XXXX_ACCT. If you do not find any applicable notes please
83
    log an OSS message.
84
MESSAGE x216(kf) WITH gc_ce4acct_name.
85
86
when 2.
87
    Records were to be inserted into the segment table CE4xxxx
88
    but the segment numbers were already occupied. Most likely
89
    This problem is due to a explicit or implicit change to the
90
    number range COPA_OBJ (subobject is the operating concern)
91
    e.g. caused by illegally transporting the contents of CO-PA
92
    transaction data table contents (CE4xxxx).
93
    Please check OSS for notes with keywords RKEVRK2A_POST, KF203
94
    and CE4XXXX. If you do not find any applicable notes please
95
    log an OSS message.
96
MESSAGE x203(kf).
97
98
when 3 or 4.
99
    Communication error in RFC-Call
>>>>>
message x628(ke) with 'RFC_ERROR' subrc msg_text.
101
102
endcase.
103
104
ENDFORM.
105
Edited by: freddy solar on Jan 2, 2009 8:39 PM

Hi,
it looks like you have some problem with RFC. It stopped on the following line:
* Communication error in RFC-Call
message x628(ke) with 'RFC_ERROR' subrc msg_text.
Ask your basis guy to check it. The job on application server tried to connect to the central instance and it failed. The job run on central instance does not need to make any RFC call. Hence there is no problem in this case.
Regards

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

Best Practice: Usage of the ABAP Packages Concept?

Hi SDN folks,
I've just started on a new project - I have significant ABAP development experience (15 years+) - but one thing that I have never seen used correctly is the Package concept in ABAP - for any of the projects that I have worked on.
I would like to define some best practices - about when we should create packages - and about how they should be structured.
My understanding of the package concept is that they allow you to bundle all of the related objects of a piece of development work together. In previous projects - and almost every project I have ever worked on - we just have packages ZBASIS, ZMM, ZSD, ZFI and so on. But this to me is a very crude usage of packages, and really it seems that we have not moved on passed the 4.6 usage of the old development class concept - and it means that packages do not really add much value.
I read in the SAP PRESS Next Generation ABAP book (Thomas Ljung, Rich Hellman) (I only have the 1st edition) - that we should use packages for defining separation of concern for an application. So it seems there they are recommending that for each and every application we write - we define at the least 3 packages - one for Model, one for Controller and one for view based objects. It occurs to me that following this approach will lead to a tremendous number of packages over the life cycle of an implementation, which could potentially lead to confusion - and so also add little value. Is this really the best practice approach? Has anyone tried this approach across a full blown implementation?
As we are starting a new implementation - we will be running with 7 EHP2 and I would really like to get the most out of the functionality that is provided. I wonder what others have for experience in the definition of packages.
One possible usage occurs to me that you could define the packages as a mirror image of the application business object class hierarchy (see below). But perhaps this is overcomplicating their usage - and would lead to issues later in terms of transportation conflicts etc.:
                                      ZSD
                                        |
                ZSOrder    ZDelivery   ZBillingDoc
Does anyone have any good recommendations for the usage of the ABAP Package concept - from real life project experience?
All contributions are most welcome - although please refrain from sending links on how to create packages in SE80
Kind Regards,
Julian

Hi Julian,
I have struggled with the same questions you are addressing. On a previous project we tried to model based on packages, but during the course of the project we encountered some problems that grew overtime. The main problems were:
1. It is hard to enforce rules on package assignments
2. With multiple developers on the project and limited time we didn't have time to review package assignment
3. Devopelers would click away warnings that an object was already part of another project and just continue
4. After go-live the maintenance partner didn't care.
So, my experience is is that it is a nice feature, but only from a high level design point of view. In real life it will get messy and above all, it doesn't add much value to the development. On my neew assignment we are just working with packages based on functional area and that works just fine.
Roy

FAQ's, intros and memorable discussions in the ABAP Objects Forum

Welcome to the SDN ABAP Objects Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
ABAP Objects
About polymorphism - still not sure after searching... => Polymorphism adaptation with referencing the source, and a Guest who did not...

Obsolete ABAP Statements from 2004s - what about your existing code-base? A great discussion about the changes in syntax checking between 46c and basis release 7.0.

What the **** is going on in the ABAP forums?!

I've been away from SDN for a few months due to work comitments and am only just starting to browse regularly again...
I can't believe how bad the standard of questions and answers in the ABAP-General forum has got. I thought it was as bad as it could get but i was wrong. Simple, repetitive questions. Massive cut and paste answers that often have nothing to do with the question. Everyone saying Please reward with points often after supplying a wrong/inacurate/irrelevant answer. Constant streams of interview questions. Same answers being copied and pasted again and again by different people... The problems go on and on and we've seen them all before, yet it still seems like hardly anything is being done about it.
Seriously, what is the point?! I know the moderators must be hard pushed to manage it all but isn't there a way to clean it up a bit please? It's painful to browse at the moment.
As far as I'm concerned, the forums are a bit of a waste of time and space at the moment as the content is so watered down with rubbish unless you are about to write your first ABAP program they are of no use to anyone.
Gareth.

I'm glad this topic still gets a lot of interest and there are still people on here who are actually bothered.
Rob, I think your answer is my favourite and is certainly the one my colleagues and I come up with the most.
As pointed out, there will always be people who are too lazy/uneducated/short of time/whatever to do their own job or to research a problem they are having. Nothing we can do will ever make that go away. The issue is how we react and deal with it.
I don't believe charging for SDN is the answer - a lot of people will move back to SAPFans.com and/or other sites and as someone else has said, people will feel they have the right to post the rubbish if they are paying.
We've all been over this topic numerous times and on each occaision a common output is everyone wants to see more and stricter moderation. I honestly believe a moderating approach similar to SAPFans.com would help a great deal in cutting out the root cause - things like people asking for points and people posting CV's are symptoms or effects of the fact original posters are allowed to ask stupid questions or ask for fake resumes. Things like using "Hi" in the subject of a message or not bothering to search before asking what regular SDN contributors/readers know is a common question can all be cut out with simple moderation.
So we come back to moderation of the forums - something we've gone over time and time before.
Blag, I can see you have been sorely missed in the forums - you were still very active last time I was on regularly and I can see a big difference between then and now. Although you may feel like it is an uphill struggle you were obviously making a big difference. It's a shame there aren't more of you
Nick, I've just seen your response whilst writing this and you raise an interesting point I've not considered before about managers having an input in the use of SDN. I think the problem here is that (certainly in my opinion) the majority of the noise appears to originate from off-shored resource which typically will be quite removed from their customer/manager/employer. In some ways I've always considered the explosion of the IT market in India for example to be working against itself - there appears to be more jobs that suitably qualified workers leading to the state we have now of fake CV's and people in jobs who don't know what they are doing. I'm guessing management in this scenario will be happier to have a team of people producing all of their work with SDN's help rather than a team of fully certified, heavily experienced consultants who are too expensive to obtain any off-shoring work...
I also agree that removing the points system won't necessarily solve all of the perceived problems - again I think points abuse is something else stricter moderation could help to remove.
Anyway, before I really get on my soapbox I'm going to stop rambling
Gareth.

FAQ's, intros and memorable discussions in the ABAP General Forum

Welcome to the SDN ABAP General Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- usefull coding examples from the [ABAP Code Gallery|https://wiki.sdn.sap.com/wiki/display/Snippets/CommunityCodeGallery]
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.

ABAP General
client dependant => Do not ask simple interview questions without enough information, because "it depends"...
Open Web browser => Different ways to start the browser on a hyperlink.
Icon on Selection -screen => Icons on either side of the selection-screen.
FM for uploading Image to SAP => Uploading an image to the MIME repository.
How to Send Email to Outlook? => Just as the subject title says... perhaps he read the forum rules before posting... ;-)
ABAP Commands - Unicode Upgrade => Usefull information about the impact of unicode conversions on ABAP.
Calling Multiple BAPIs in a single LUW => committed to the details of COMMIT WORK
Create a parameter to enter a password => Input parameters with hidden visibility.
Problem with statement "find all occurences of ..." => How to find all character sub-strings in a string using ABAP Char utilities.
retrieving internal table info. during runtime from callstack => Little tricks which become obsolete after a while ... :-)
Passing an Internal Table to a Report executed through 'Submit' => Rich demonstrates IMPORT and EXPORT statements.
Cannot decrypt password encrypted with FIEB_PASSWORD_ENCRYPT => Obsolete functions are dead. Long live released APIs.
express CR_LF and Remove of non-printable characters from string => ABAP Char utilities, find and replace '##' on the application server.
*NEW!!!*Rare 'bug' with SUBMIT => Interesting behavior of SUBMIT without VIA SELECTION-SCREEN addition
Last edited by: Thomas Zloch on Sep 18, 2011 10:10 PM
Edited by: Suhas Saha on Jan 31, 2012 11:55 PM

DDNTF_CONV_UC~" does not exist in the ABAP Dictionary

Hello Experts ,
We are migrating our ECC system from Oracle to HANA DB using DMO - during Post Processing phase we are getting the following error :
(screenshot attached)
4 ETG003 Table "DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTF~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT~" does not exist in the ABAP Dictionary\
1. Am not sure why Shadow tables are considered in this phase ?
2. What steps i can follow to fix this error ?[I tried activating those using se14 but activation button is disabled].
3. I have a option to ignore and move forward but am not sure about the side affects ?
Source ECC6 Ehp5 702 on Oracle.
Target ECC6 Ehp7 740 on HANA.
SUM SP12 PL02
Thanks
Dev

Hi Avinash,
two comments on this:
This is not an issue, as this text is NOT an error message.
(An error message lists the "E" as second character,
but the screenshot above shows a space as second character.)
The log handling for this phase will be adapted in SUM SP13, so that non-errors are not listed at this point, to avoid this confusion.
SUM 1.0 SP12 PL 1 to PL 3 must not be used any longer, see SAP Note 2122247.
Regards, Boris

About the abap

Similar Messages

Maybe you are looking for