About the automation of "Adjust Transport Queue"

Hi, Experts.
I want to know about the automation of "Adjust Transport Queue".
Concretly, I want to copy Transport Data&cofiles
from Transport Domain Controler(DEV) to PRD System.
[Environment]
DEV -- Location A, Domain Controler
QAS -- Location A
PRD -- Location B ** different Location from Domain Controler **
Therefore when I execute Transport to PRD,
"Adjust Transport Queue " is necessary to do.
I know the JOB to refresh Transport List,
but I don't know the JOB to Modify transport Queue.
If you know it , please tell me the way.
Best Regards.
Toshikazu Takahashi.

Hi Pavan,
Thanks for your post.
What’s the version of your TFS?
How did you specific the file path in InvokeProcess activity? Where you stored this batch file, under a local path in your build agent machine?
As the TFS Build will running on build agent machine, so you can create the batch file under a local path in your build agent machine, for example C:\BAT\test.bat, then specific in this “C:\BAT\test.bat” as the
FileName in your InvokeProcess activity. You can refer to Hari’s reply in this similar post:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b8bcb19f-1296-441c-8356-e701b949445a/tfs-2010-how-to-execute-a-batch-file-after-build?forum=tfsbuild.
Each TFS build’s drop location copied from binaries folder, you can find the binaries folder from
C:\Builds\ID\teamprojectname\builddefinitionname\bin on build agent machine, so you can write your batch script to copy latest files form this binaries folder for each TFS Build.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Software Component Vector in Modification Adjustment Transport

Hello all,
We are in the middle of a support pack project for our SRM system, and I've run into a snag as I prepare to move them into QAS. We've had this system for many years, and when DEV was originally installed in 2000 it was as a B2B 2.0a system. It was upgraded to 2.0b before GoLive, and the QAS and PRD systems were installed directly as 2.0b systems. The entire landscape has been upgraded several times in the twelve years since, and today it is on release SRM 5.0.
The problem is that the DEV system still shows an installed software component of NDI_ERM (Extended Relationship Management) in release 20A. Obviously that is actually long gone, but it still shows up in SPAM in the Display Package Level function, and under Attribute SAPCOMPONENT in the properties of all transport requests released from this system. It should have been passively deleted during the first (or subsequent) upgrade long ago, but for whatever reason that didn't happen. This software component never existed in QAS or PRD and does not show up in SPAM in those systems.
This hasn't been an issue in the past, and so I've just ignored it as I always had bigger fish to fry. I've performed upgrades and support packages for these systems without an issue, but we hadn't done any of these tasks for the past three years.
Until now.
I successfully installed support package stack 28 for SRM 5.0 into DEV a few months ago, and I performed the required modification adjustments in SPAU, creating the usual modification adjustment transport. Now, however, when I am trying to import the support packs into QAS, I have a problem when defining the queue, at the step for adding the modification adjustment transport. The transport is marked with a Software Component Vector that includes the defunct ghost NDI_ERM 20A, and NDI_ERM doesn't exist in QAS. SPAM finds the transport, but marks it with a red light ("Transport does not fit"). Drilling into details shows me that everything matches perfectly except for my ghost. On that line I get "The software component is not installed," and SPAM will not allow me to add the transport into the queue.
I should point out that I can import regular transports just fine, and I'm pretty sure I could just import the queue without the modification adjustment transport, and then import it manually when SPAM gets to the step about performing the adjustment. No doubt that would work, and that's almost certainly what I'm going to end up doing. But it bugs me that I can't fix this.
I have some thoughts about fixes that might work, and I'd like input on whether anyone else has dealt with (and solved) this problem before.
I think that I could probably just delete the line in DEV in table CVERS for NDI_ERM and so have it no longer show up in the attributes of future transports. That might solve the problem going forward, though it won't fix the mod adjust transport I've already released. Any thoughts about this?
I was able to get the existing transport to no longer show NDI_ERM in its attributes by deleting the appropriate line in DEV in table E070A. After doing that the transport looked fine in the STMS queue for QAS when drilling into its properties. However, this apparently isn't enough for SPAM. As I had already uploaded the transport in SPAM once, SPAM 'remembers' it and seems to have therefore cached its properties, including the NDI_ERM software component. I haven't been able to figure out how to get SPAM to 'forget' this transport so I could completely upload it anew and hopefully get new attributes that will then match the correct software component vector for the target system. Resetting the queue status doesn't do it.
Any thoughts on where (what tables) SPAM stores information about modification adjustment transports, and how to clear that information out? Any thoughts on the (admittedly drastic) measures I've mentioned above?
Thanks in advance,
--Matt

Hello,
SAP strictly forbids the modification of those tables for specific Add-Ons or even essential software component. As you do not really delete those products from a SAP system. This will only partially remove meta information from a SAP sytem. After the "reinstallation" the data and many other log files are still exists and may have some really inconvenient side effects in a SAP systems (inconsistent installation, incomplete database table conversion, problems regarding maintenance via notes and support packages, modifications cannot be reverted...) .
Additionaly it will be very difficult or even impossible to resolve upgrade or maintenance issues.
If you have any issue regarding an installation of a SAP product, you should contact the corresponding SAP support. They will provide you the right solution.
Currently SAP only provides for a small subset of Add-Ons the deinstallation.
Thanks a lot for your understanding
with kind regards,
Thorsten Scheyter (Development support)

Adding Modification Adjustment Transports to SPAM queue

Hello;
As part of my upgrade, I need to remove a table column as the upgrade to component SAP_APPL will re-insert it. However, if I remove it separately from the upgrade, the activation of the table removes the data - which needs to be kept.
I've created a transport that will remove it. How do I include it in the queue when the the stack for SAP_APPL is imported? Will the Modification Adjustment displayed when "queuing" the SAP_APPL stack allow the transport to be imported with them? If so, how do I get the transport into the respective queue so SPAM will see it?
Thanks.
Jim

Hi Jim,
YOu can include Modification Adjustment Transport only in the SPAM import queue.
It is not possible for your to include a normal transport in the SPAM import queue.
for details, you can refer to the online help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/de/151042f664e12ce10000000a1550b0/content.htm
So my suggestion is to just do SPAM import on your DEV system, and when the import run into the SPDD phase, you can create transport and do modification adjustment for this table. When you do upgrade on QAS and PRD system, you can include the modification adjustment transport generated on DEV system in the SPAM import queue.
For details please refer to the online help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/53/5c36c25db111d2b414006094b9ea64/content.htm
With Best Regards
Julia

Does Charm supports the stms function "Adjust queue"

Hi Gurus.
Our SOLMAN Prod is on version 7.0 SP 25 and I'm trying to activate new system to use the CHARM for transports.
In the new satellite system, the "Adjust queue" function in STMS was used.
Does CHARM supports this function?
Any suggestions will be greatly appreciated.
Thanks,
Tess

Hi,
Yes, ChaRM support this functionality.
If you have configured transport routes between systems in different transport groups, the requests to which the transport files are to be transferred are displayed in the import queue of the target system.
Before you can import these requests, you have to transfer the data files and co-files belonging to the requests by Adjusting the Import Queue.
See also: http://help.sap.com/saphelp_smehp1/helpdata/en/06/ea457a12a711d3b46f006094b9ea64/content.htm
This is the only information i have. I hope that helps.
Thanks
Regards,
Vikram

HT1918 I cannot find information about an automated warning email, which tells me to view the (nonexistent) following info. Help!

I purchased a song from ITunes. Soon after I received an automated email which asks me about the security questions, saying I should consult the following info. It was a warning. There was no following info, and an automated email leaves me in the dark. I can't find anyway to contact the source. Can anyone help - I am not very savvy irtual-wise?
JohncSanRemo

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

Download- my computer os was wiped and i need to reinstall my acrobat application. who can i actually talk to about this? i just spent 10 minutes on the automated phone cycle, which was very unsatisfying How to talk to an actual person?

my computer os was wiped and i need to reinstall my acrobat application. who can i actually talk to about this? i just spent 10 minutes on the automated phone cycle, which was very unsatisfying How to talk to an actual person?

while waiting for a phone number, if you need an installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

To whom do I complain about the calendar on the iPad 2 with iOS 7? I can no longer read my appointments. Is there an adjustment I can make? Larger text size doesn't help.

To whom do I complain about the OS 7 calendar on the iPad 2? I used to be able to read my appointments. The new small font is horrible. Text size doesn't seem to change it. Can I change it?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
 Cheers, Tom

About the Transports

Hello Gurus,
I have created a query and I I saved the query elements under different Packages and requests. How to know what are all the paclkges that and requests that are involved in saving this query. Pls advise.
MSM.

Before closing if you figured out the answers just post it so that it will be easy for others.
Any way for this :
You can drag and drop the query in Transport connection and in that window you should be able to see the package as the last column and transport number in one of the columns.

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

Is it possible to automate software instrument parameters in a MIDI region? And alias the region with the automation?

I am trying to track down a detail about how automation works in Logic Pro X.
What I want to know is:
1. Can I draw control-point curves (and smoothly bend them) in a MIDI region to automate a software instrument parameter (and/or smart controls)?
2. Can a region containing this automation be aliased and reused around the timeline (without the automation points being duplicated)?
If this is possible, can someone please post a couple of screenshots - a MIDI region with MIDI Draw automating (for example) the cutoff of an ES M, and screenshots of aliases around the timeline?
thanks!!
H

First, I'd recommend going to Track>other>new with same instrument. This gives you a blank lane to make a region with no notes.
Now, there are two strategies: do some track automation and then convert it to region. You can go into the local view menu and find the option to view MIDI automation and still adjust it. Now you can make aliases of that region. You need to be careful of accidentally writing new track automation, which is easy to do and can happen if you have 'move automation with regions' on for instance. If you make sure and delete all the track auto for this parameter you should be good (the line should be barely visible black, if it is highlighted in color, that means there is at least one active node at the beginning). If the parameter freaks out, instead of following your curve, you can bet there is track automation fighting with the region automation, you might need to tell the automation menu in the track header to show the parameter in question. None of this is a big deal and after doing it once you'll see.
The other strategy is to assign a controller to a parameter (or use the quick MIDI things on certain instruments - you mentioned ES2, which has that) and you can use the hyper draw in the piano roll. The view tip from the first strategy still works so you can edit the automation in the arrange. I prefer the first strategy because the knob you are automating will still move.
If you go to audio tuts plus (something like that) you can find a tut on the first method that's a few years old, and from Logic 9. Basically the same, you just have to look through different menus for everything.

Adjust import queue

I want to adjust improt queue for a single request in PRD but when i press the zikzak symbol , It says transfer transport files for 61 transport request from import queue.As per my knowldge adjust of import queue for more then one request is not an issue. but client want to adjust sinle request .Kindly help.

Hi,
I am not sure if it is possible. Try using the filter option to have only the selected TR in the queue and adjust. SAP help document says "If you want to adjust only those requests from specific projects, choose the requests belonging to this project using the filter function."
Take a try.
Regards,
Sanujit

Adjust import queue Icon - Query

Hi
This is regarding the adjustment of import queue during the transport from QA to PRD. I have read the explanation in sap help as below,
http://help.sap.com/saphelp_46c/helpdata/en/44/b4a4617acc11d1899e0000e829fbbd/frameset.htm
USE: If several transport directories are configured in a domain, data must be transferred between these directories if a transport between systems with different transport groups is to occur.
My Question is,
Why the adjust import queue icon is displayed only for certain transport request and not for all requests?
In other words, which requests will have the adjust import queue icon as per the above definition?
Please explain with an example.
regards,
Vinodh.

Hi Vinod,
The concept of moving Change request mechanisum is move changes from on esystem to other systems which are in different domain.
For example you have created a CR in DEV system with DEVK900001.
Once you release this request Cofiles and data files will be created in DEV trans directory.
Now you want to add this request (DEVK900001) in to your system for example QAS.
First you need to place TR's in to you system ( Cofiles and data files ).
Now what happens is the TR's are added in you system OS level not in buffer.
Once you added these TR's at OS level chek in Buffer directory in trans/buffer. You can not find these requst numbers in Buffer folder. Once click on Refresh button in Target system you will get added these requests in Buffer of your system.
Now you are able to see these requests in STMS_IMPORT t-code.
Regards,
Suraj

Different change request about the same object

Hi Gurus,
I have some doubts about CR (change request) from one system to another, such as from development system to quality or quality to production.
If I have 2 or more CUSTOMIZING CR about the same object Can I say that they are however identical (they contain the same information)?
For example on the customizing table:
record1 contains value 'A' --> CR number 1 is opened
record1 contains value 'B' --> CR number 2 is opened
If now I transport CR number 1 I transport value 'B'.
And the same if I transport CR number 2.
Is it correct? Both CR points to the actual value of the record?
Instead if I have 2 or more WORKBENCH CR I know they "remember" the history of the modifications:
For example on a program with only 1 istruction:
data: x.
--> CR number 1
data: x,y.
--> CR number 2
What happen If I transport the 2 CR simultaneously (selecting both from STMS) ?
What will be the result in quality/production system? Which CR "wins"?
Thanks in advance
Guido

At time of release from DEV, the current object version or table content is written into the transport data file, thus "detached" from further changes in DEV.
Now if two transport requests 1 and 2 contain the same object in two versions (older and newer) and are being imported into QA, the following scenarios are possible:
- 1 is imported first, then 2: newer version will be in QA -> OK
- 2 is imported first, then 1: older version will be in QA -> not OK
- both are imported at same time: newer version will be in QA -> OK (STMS checks when the requests were added to the import queue and sorts accordingly)
Thomas

Can not find the Automation Folder.... neither its Key Command...HELP

I would be grateful to anyone who could find a solution to the following issue:
I have read in Logic's 7.2.3 help reference about track automation folder. The sort of arrange window that seems to lurk behind the main arrange page and the place where you can treat the automation data as proper region material. I have tried everything, .. there does not seem to be any key command of the sort, more over I can not find any other way that could give me access to such an editor like the Automation Folder.
Thank you for reading this.
Nik

• 1 • If you choose 'New Track' from the Menu, or use Control-Click-&-hold, you can select from the various options.
• 2 • No, you don't need to do anything — it's entirely voluntary… I feel guilty for even mentioning it… I just thought that since you seem to be genuinely grateful for the help you have been getting, you had probably not read the article fully. I see that you have just had a useful reply from John Alcock, so now's your chance!

Re: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't forget about the regular expression potential

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

About the automation of "Adjust Transport Queue"

Similar Messages

Maybe you are looking for