About the BBM messenger registration status

I just bought my torch around a weeok ago, and I can't see someone else display picture in BBM and everytime i tried to do the messenger status is always failed and keep saying retry. Can you help me please! How to activate the messenger status.

27elzahraferdi wrote:
I just bought my torch around a weeok ago, and I can't see someone else display picture in BBM and everytime i tried to do the messenger status is always failed and keep saying retry. Can you help me please! How to activate the messenger status.
Hi 27elzahraferdi,
You need sufficient BlackBerry data plan. Contact your Service provider to add BlackBerry data plan.
Thanks!
Good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

Blackberry Messenger registration status

I downloaded the new bbm and when it asked for my blackberry id password i typed in the wrong one by accident and so now my phone is telling me to 'open the My Profile screen and check the Blackberry registration status.' - how do i do this?

you typed an incorrect password and your device told you so?
Then type it again without mistake.
do a battery pull first if need be.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

What about The MSN Messenger ?

I have seen the introduction of the new update for the iphone but I didn't ear nothing about of the msn messenger I don't Know but I think many people use this don't?

I found an interesting way around this today. It was quite by accident, but it worked. I have conversations with my father on MSN. They live several states away, and it is cheaper to do this than make a phone call. I had him send me an email to my phone (one before the iPhone) [email protected], where xxx-xxx-xxxx is my phone number. Well, his computer remembered that in his Hotmail, and when he opened MSN, I was listed as one of his "buddies" on the page. So, he clicked to send me an instant message, and it came across to me as an SMS. We carried on a conversation like that. Now, while you may not be able to initiate a conversation, because the address it came from was a jumble of numbers to start with, but did have his email address imbedded, it worked.
Maybe worth a try to start with.
Hope this answers you question somewhat. Not sure what the 2.0 firmware could bring!

Bbm messenger not showing on bridged playbook

hi everyone
im a newbie when it comes to blackberry, but my problem is when i bridge my playbook with my curve, the bbm messenger icon does not appear on the playbook,any ideas on how i can fix it?
Solved!
Go to Solution.

Hi there,
I found an article in the knowledge base that you might find interesting.
Here's the link. Check it out and let me know if it was useful....
http://www.blackberry.com/btsc/KB26542

Bbm messenger on playbook

I love my playbook and it work great but ever since the first software update i can no longer enlarge my bbn contacts photo. And the functionality of the bbm messenger is not as good as on the phone like saving photos sent to me by my contacts.
I am posting this to see if someone knows how to get this info to rims developers so they can rectify these problems

Hi there,
I found an article in the knowledge base that you might find interesting.
Here's the link. Check it out and let me know if it was useful....
http://www.blackberry.com/btsc/KB26542

TS3354 Cannot downloading TV movies. Itune attempts download but then freezes after about 1 minute into the download. Download status first states video will take 37 then 45 hours to download

Cannot downloading TV movies. Itune attempts download but then freezes after about 1 minute into the download. Download status first states video will take 37 then 45 hours to download. My computer more than meets the minimum requirement for HD downloads...not sure about the HDCP capability

Hi 1611kjb,
Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

BBM Across Platform, what about the older devices?

Yes, as we all heard is that bbm is coming to android and Iphone. We all know that BB10 does not us BIS and the older devicec need BIS to operate to the full, why can blackberry not open this to all so that i can bbm without BIS on my older device? yesBIS is nice but what about the people that want to use their older phones like the BB10.
Only some features work without BIS, like the excample whatsapp, browser but all the good stuff like Blackberry world are blocked as well as Blackberry Protect, Facebook and so i can go on ....
Let the people that want BIS get it like that and the other that want it without BIS get it like that then Blackberre will be more flexible.
Cant they see they will now loose more customers to the other platforms where they can keep the people on the older native devices ....Please Blackberry UNBLOCK US ....

Yes, 1.19GB of "other" is normal. Normal is a little over 1GB.

About the server handle status:OCI_ATTR_SERVER_STATUS

Hi All
From time to time, my OCI application got ORA-03113: end-of-file on communication channel. I add one function to dectect if server connection is fine.
by
OCIAttrGet((dvoid *)svr, OCI_HTYPE_SERVER, (dvoid *)&serverStatus, (ub4 *)0, OCI_ATTR_SERVER_STATUS, err);
if serverStatus=OCI_SERVER_NORMAL, then connection is ok.
if serverStatus=OCI_SERVER_NOT_CONNECTED then connnecion is gone.
, will reconnect.
But i found seems it does not detect te case for "end-of-file on communication channel". serverStatus return is fine, then execute command, still got this error.
any comments?
Thanks
Alex
OCI_SERVER_NOT_CONNECTED

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

BB Messenger registration failed

I just got a BB curve 9300 and email and internet are set up and working. Having difficulty setting up BBM though.
When I go into My Profile, it says Registration failed and if I click Retry it says
"BBM failed to register with the BlackBerry messenger service. Registration is necessary to use the features of this application. Please ensure your device time is correctly set, open the My profile screen and check the BBM registration status"...
Anyone have any light to shed on the matter? Living in South Africa- time zone set to Harare (GMT + 2)
Is there anything I can do?
Thanks!!

Hello achitas9300,
Did you change devices and had used your BlackBerry Messenger on a different device? If so, did you remove back up your BBM list using an email account? Is that email account associated to this device?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

BBM messenger conversation dissapear!

When I have several conversations in the BB messenger with contacts, and some conversations disappear after a couple of days.
Why are they being erased? I never erased them.
thanks

I don't believe you can store these conversations forever in BBM. If you want to maintain a history, in the conversation press menu/blackberry button and "copy history". You can go and paste it into notes/memo after that.
It may be getting deleted if you are running low on memory. Check Options>Status for your "file free" value. Keep that above 15000000 bytes as much as possible. Doing a Battery Pull helps as well:
1. Remove the battery while phone is turned on
2. Wait a few seconds before inserting it again
3. Allow the long boot up process to finish (takes a few minutes usually)
This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://software.crackberry.com/product.asp?id=27660
A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

My bbm messenger isent working curve 8520

My BBM messenger sent working curve 8520 ive tried turning if taking battery out and all I get is the 3 lines to say its sending but it never send to no one please help me

Hi and Welcome to the Community!
Given what you state, you are still using your home carrier SIM and are attempting to use your services via an International Roaming plan provided by your home carrier. Such can be challenging for some carriers to properly configure...I had two "failed" international trips before my prior carrier could properly configure my international roaming.
The challenge is that the configuration that your home carrier must do must be done while your BB is actually on your home carrier network; changes to the configuration cannot be done while you are actually roaming. To make this even more challenging, testing of the configuration cannot happen until you travel and attempt to use it.
This creates a great challenge -- if they configure it incorrectly before you leave your home network, and the testing fails when you travel, then they (your home carrier) typically can do nothing about it until your device returns to your home carrier network. (Hence those two "failed" trips of mine that I mentioned earlier.)
As far as I understand, your only option is to wait until you return home and then talk to your home carrier again, letting them know what happened, and hope that they can fix it for your next trip.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hello please i need some information about the blackberr...

hello please i need some information about the blackberry instant messenger is how does it work , i heard that i send messages for free from a blackberry to a blackberry is it true ? does it need internet ? and does it matter if the other phone is in another country'
thank you alot

Hello,
Here is a page with much information about BBM:
http://na.blackberry.com/eng/devices/features/im/blackberry_messenger.jsp
Hope that helps! If not, Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ISE 1.2 - Self-Provisioned devices still in pending registration status

Hi everybody,
I'm on ISE 1.2 patch 2, setting up single-SSID self-provisioning BYOD flow which works as expected except for a couple of issues:
first PEAP authorization always fails (no server certificate confirmation appears on device and no Endpoint Profile is assigned), second on goes through as expected and self-registration flow is started;
at the end of the flow, TLS certs are installed, device appears in endpoint database under user's account but "Device Registration Status" stays "pending" and this makes it impossibile to further authorized RegisteredDevices identity group;
single mobile devices gets different "Endpoint Profile" result at each subsquent access. For example: Android smartphones are profiled as Android or HTC device or HP devices or Samsung randomly.
I've tried to analyze log files but cannot extract a full dump of the profiling process that could help identify why all this happens.
Can you please help?
Regards,
L

Hi Kevin,
I did not find and answer. In subsequent patches the self-registration flow seems to have changed somehow and now I have more device in 'Registered' state, but still most of the time at the end of the process there is no guarantee that the devices will be in this stage. I've moved to more broad policies for authorization (i.e. if you have a valid certificate and login from one of the accepted profiles, we'll let you in).
Please let me know if you open a TAC case, what is the answer.
Regards,
L

About the template FSCM9.1 FP2 Peopletools 8.52.03 (v4 - July 2012)

Hello,
Just tested quickly this new template delivered 2 months ago (July 2012).
As far as I undestand, it is just a recut of the one delivered in April 2012. At least it solves the main issue I reported in that other About the template FSCM9.1 FP2 Peopletools 8.52.03 (v3) about the network prompt missing.
But I still have remarks/issues on the template FSCM9.1 FP2 Peopletools 8.52.03 (v4) released earlier in July 2012.
_1. First of all, there a lot of errors reported in /var/log/messages_
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.883:3): avc: denied { read } for pid=92 comm="restorecon" name="libc.so.6" dev=xvda2 ino=21 scontext=system_u:sys
tem_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.910:4): avc: denied { execute } for pid=92 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:5): avc: denied { read } for pid=296 comm="pam_console_app" name="ld.so.cache" dev=xvda2 ino=94143 scontext=s
ystem_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:6): avc: denied { getattr } for pid=290 comm="pam_console_app" path="/etc/ld.so.cache" dev=xvda2 ino=94143 sc
ontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:7): avc: denied { read } for pid=293 comm="pam_console_app" name="libc.so.6" dev=xvda2 ino=21 scontext=system
_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:8): avc: denied { execute } for pid=293 comm="pam_console_app" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 sco
ntext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: input: PC Speaker as /class/input/input3
Sep 13 05:02:55 localhost kernel: Initialising Xen virtual ethernet driver.
Sep 13 05:02:55 localhost kernel: Error: Driver 'pcspkr' is already registered, aborting...
Sep 13 05:02:55 localhost kernel: Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Sep 13 05:02:55 localhost kernel: floppy0: Unable to grab IRQ6 for the floppy driver
Sep 13 05:02:55 localhost kernel: lp: driver loaded but no devices found
Sep 13 05:02:55 localhost kernel: md: Autodetecting RAID arrays.
Sep 13 05:02:55 localhost kernel: md: Scanned 0 and added 0 devices.
Sep 13 05:02:55 localhost kernel: md: autorun ...
Sep 13 05:02:55 localhost kernel: md: ... autorun DONE.
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda2, internal journal
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526929.896:9): avc: denied { execute } for pid=965 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext
=system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda1, internal journal
Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 05:02:55 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvdb1, internal journal
Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526930.647:10): avc: denied { execute } for pid=989 comm="setfiles" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526942.398:11): avc: denied { net_admin } for pid=990 comm="setfiles" capability=12 scontext=system_u:system_r:setfiles
_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=capability
Sep 13 05:02:55 localhost kernel: hrtimer: interrupt took 35229469 ns
Sep 13 05:02:55 localhost kernel: Adding 2104504k swap on /dev/xvda3. Priority:-1 extents:1 across:2104504k SS
Sep 13 05:02:55 localhost kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.
Sep 13 05:02:55 localhost kernel: Loading iSCSI transport class v2.0-870.
Sep 13 05:02:55 localhost kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Sep 13 05:02:55 localhost kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Sep 13 05:02:55 localhost kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (cxgb3i)
Sep 13 05:02:55 localhost kernel: NET: Registered protocol family 10
Sep 13 05:02:55 localhost kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
Sep 13 05:02:55 localhost kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Jan 06, 2010)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (bnx2i)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (tcp)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (iser)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (be2iscsi)
Sep 13 05:02:55 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 13 05:02:55 localhost kernel: warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526970.336:12): avc: denied { sys_tty_config } for pid=1374 comm="consoletype" capability=26 scontext=system_u:system_r
:consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
Sep 13 05:02:55 localhost kernel: RPC: Registered udp transport module.
Sep 13 05:02:55 localhost kernel: RPC: Registered tcp transport module.
Sep 13 05:02:55 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 13 05:03:00 localhost automount[1769]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Sep 13 05:03:59 localhost kernel: type=1400 audit(1347527039.771:13): avc: denied { sys_tty_config } for pid=2029 comm="consoletype" capability=26 scontext=system_u:system_r
:consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
Sep 13 05:04:00 localhost NET[2061]: /sbin/dhclient-script : updated /etc/resolv.conf
Sep 13 05:04:01 localhost kernel: IPv6 over IPv4 tunneling driver
Sep 13 05:04:01 localhost NET[2219]: /opt/oracle/psft/vm/oraclevm-template.sh : updated /etc/resolv.conf
Sep 13 05:04:08 localhost NET[2472]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
Sep 13 05:06:08 localhost restorecond: Reset file context /etc/resolv.conf: system_u:object_r:etc_runtime_t:s0->system_u:object_r:net_conf_t:s0
Sep 13 05:08:19 localhost kernel: Slow work thread pool: Starting up
Sep 13 05:08:19 localhost kernel: Slow work thread pool: Ready
Sep 13 05:08:19 localhost kernel: FS-Cache: Loaded
Sep 13 05:08:19 localhost kernel: FS-Cache: Netfs 'nfs' registered for caching
Sep 13 05:08:19 localhost kernel: svc: failed to register lockdv1 RPC service (errno 97).
...Well, I don't know if it triggers others problems yet, but the last line could reveale an error within the /etc/hosts file which has not been properly modified during deployment (especially IPV6, it probably should be removed) :
[root@psovmfscmfp2 /]# more /etc/hosts
127.0.0.1       localhost.localdomain   localhost
::1     localhost6.localdomain6 localhost6
192.168.1.150   psovmfscmfp2.phoenix.nga psovmfscmfp2
[root@psovmfscmfp2 /]#_2. Now about the COBOL_
Despite I choosed to install Microfocus, COBOL does not work. Sample COBOL processes such as PTPDBTST and PTPDTTST finished in error.
The log is empty, here below the output from the file $PS_CFG_HOME/psft/pt/8.52/appserv/prcs/PRCSDOM/LOGS/stdout (psadm2) :
=================================Error===============================
Message:     Process 10899 is marked 'Initiated' or 'Processing' but can not detect status of PID
        Process Name: PTPDBTST
        Process Type: COBOL SQL
        Session Id:   9313
=====================================================================
OprId = VP1Note that I successfully tested AEs and SQRs.
Here is the command line fired that I can see from the process monitor > parameter (nga is being my run control id) :
PSRUN PTPDBTST ORACLE/F91TMPLT/VP1/OPRPSWD/nga/10899//0 I used the following trace setting on the PTPDBTST's process parameter (override) to see what happens :
%%DBTYPE%%/%%DBNAME%%/%%OPRID%%/%%OPRPSWD%%/%%RUNCNTLID%%/%%INSTANCE%%//%%DBFLAG%%But it does not generate more logs...
I also use "RCCBL Redirect =1" in psappsrv.cfg (reconfigure and restart appdom), then start the COBOL through menu PeopleTools > Utilities > Debug > PeopleTools Test Utilities, and run a "Remote Call Test".
I received "COBOL Program PTPNTEST aborted (2,-1) FUNCLIB_UTIL.RC_TEST_PB.FieldChange PCPC:2143 Statement:26", but it generated two empty files (PTPNTEST_VP1_0913064910.out and PTPNTEST_VP1_0913064910.err).
Next step, checking the folder $PS_HOME/cblbin, it is...er... empty... does this mean COBOL have not been compiled ? Hmmm, I'm pretty sure I replied 'yes' when it was prompted though (still have the screenshots)...
And we can see several folders dated from today and license seems ok from Microfocus directories :
[psadm1@psovmfscmfp2 tools]$ cd /opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ ls -lrt
total 264
-r--r--r-- 1 root root 10455 Nov 19 2009 ADISCTRL
dr-xr-xr-x 10 root root 4096 Nov 19 2009 terminfo
dr-xr-xr-x 2 root root 4096 Nov 19 2009 xdb
-r--r--r-- 1 root root 11949 Nov 19 2009 eslmf-mess
dr-xr-xr-x 2 root root 4096 Nov 19 2009 include
dr-xr-xr-x 17 root root 4096 Nov 19 2009 lang
dr-xr-xr-x 4 root root 4096 Nov 19 2009 es
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dynload
drwxrwxrwx 2 root root 4096 Nov 19 2009 deploy
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dynload64
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dialog
dr-xr-xr-x 2 root root 4096 Nov 19 2009 cpylib
dr-xr-xr-x 8 root root 28672 Nov 19 2009 lib
dr-xr-xr-x 3 root root 4096 Nov 19 2009 snmp
dr-xr-xr-x 8 root root 4096 Nov 19 2009 src
dr-xr-xr-x 28 root root 4096 Nov 19 2009 demo
dr-xr-xr-x 6 root root 4096 Nov 19 2009 docs
-rw-r--r-- 1 root root    49 Sep 13 05:13 license.txt
-r-xr-xr-x 1 root root 12719 Sep 13 05:13 install.orig
-r-xr-xr-x 1 root root 13006 Sep 13 05:13 install
dr-xr-xr-x 6 root root 4096 Sep 13 05:13 lmf
dr-xr-xr-x 2 root root 4096 Sep 13 05:13 aslmf
dr-xr-xr-x 6 root root 4096 Sep 13 05:15 etc
dr-xr-xr-x 4 root root 12288 Sep 13 05:15 bin
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ more license.txt
I
ORACLE-30DAYDEV64
01030 A0780 014A6 7980B A17CSo let's assume it has been properly installed and let's compile the COBOLs. Here we go :
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ cd $PS_HOME/setup
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
     Source: /opt/oracle/psft/pt/tools/src/cbl/
     Target: /opt/oracle/psft/pt/tools/src/cblunicode/
      Number of Copy Libraries Read: 71
                     Modified:       71
                 Not Modified:       0
      Number of Programs Read:       44
                     Modified:       44
                 Not Modified:       0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak: line 249: cob: command not found
cp: cannot stat `PTPCBLAE.gnt': No such file or directory
cp: cannot stat `PTPCBLAE.int': No such file or directory
cp: cannot stat `PTPCBLAE.lst': No such file or directory
...What about env. variables ? COBDIR, COBPATH and COBOL do not appears anywhere in PATH...
[psadm1@psovmfscmfp2 setup]$ env|grep -i cobol
[psadm1@psovmfscmfp2 setup]$Let's set the env variables as we could expect to be (page 27, step 17 of the given doc), and retry to compile the COBOL :
[psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
[psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
     Source: /opt/oracle/psft/pt/tools/src/cbl/
     Target: /opt/oracle/psft/pt/tools/src/cblunicode/
      Number of Copy Libraries Read: 71
                     Modified:       71
                 Not Modified:       0
      Number of Programs Read:       44
                     Modified:       44
                 Not Modified:       0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
Micro Focus LMF - 010: Unable to contact license manager.                                                                                                                              This product has been unable to contact the                                     License Manager.                                                                                                                                                Execution of this product has been terminated.                                                                                                                  This product cannot execute without the License                                 Manager. Contact your license administrator                                     or refer to the 'Information Messages' chapter                                  of the License Management Facility                                              Administrator's Guide.
cob64: error(s) in compilation: PTPCBLAE.cbl
cp: cannot stat `PTPCBLAE.gnt': No such file or directory
cp: cannot stat `PTPCBLAE.int': No such file or directory
cp: cannot stat `PTPCBLAE.lst': No such file or directory
...Ok, maybe a bit better, at least it is trying to contact LMF. Probably the LMF is not started. Let's try to start it :
[root@psovmfscmfp2 microfocus]# ./mflmman
MF-LMF:Thu Sep 13 07:19:37 2012: LMF Starting
[root@psovmfscmfp2 microfocus]#Good, it is starting, it means it wasn't (sic). Now retry to compile :
[psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
[psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
     Source: /opt/oracle/psft/pt/tools/src/cbl/
     Target: /opt/oracle/psft/pt/tools/src/cblunicode/
      Number of Copy Libraries Read: 71
                     Modified:       71
                 Not Modified:       0
      Number of Programs Read:       44
                     Modified:       44
                 Not Modified:       0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCURND.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPDBTST.cbl ...
<snipped>
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPWLGEN.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL programs have been successfully compiled.
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : The COBOL executables were copied to /opt/oracle/psft/pt/tools/cblbin
rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLP1.cbl': Permission denied
rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLUP.cbl': Permission deniedIt looks better, I think the last lines marked with "Permission denied" can be safely be ignored.
Those files are owned by psadm3 with a read only for other users (sic). But more concern, I'm wondering why it looks into apptools (???) whereas I'm using psadm1 (tools only, COBPATH=/opt/oracle/psft/pt/tools/cblbin).
Anyway, seems the *.gnt files required to run the COBOLs programs are now in bin :
[psadm1@psovmfscmfp2 setup]$ ls /opt/oracle/psft/pt/tools/cblbin
PTPCBLAE.gnt PTPDTTST.gnt PTPECOBL.gnt PTPLOGMS.gnt PTPRATES.gnt PTPSQLGS.gnt PTPTESTU.gnt PTPTSCNT.gnt PTPTSLOG.gnt PTPTSTBL.gnt PTPTSWHR.gnt
PTPCURND.gnt PTPDTWRK.gnt PTPEFCNV.gnt PTPMETAS.gnt PTPRUNID.gnt PTPSQLRT.gnt PTPTESTV.gnt PTPTSEDS.gnt PTPTSREQ.gnt PTPTSUPD.gnt PTPUPPER.gnt
PTPDBTST.gnt PTPDYSQL.gnt PTPERCUR.gnt PTPNETRT.gnt PTPSETAD.gnt PTPSTRFN.gnt PTPTFLDW.gnt PTPTSEDT.gnt PTPTSSET.gnt PTPTSUSE.gnt PTPUSTAT.gnt
PTPDEC31.gnt PTPECACH.gnt PTPESLCT.gnt PTPNTEST.gnt PTPSHARE.gnt PTPTEDIT.gnt PTPTLREC.gnt PTPTSFLD.gnt PTPTSTAE.gnt PTPTSWHE.gnt PTPWLGEN.gnt
[psadm1@psovmfscmfp2 setup]$Have a try to link COBOLs :
[psadm1@psovmfscmfp2 setup]$ ./psrun.mak
./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
./psrun.mak - Successfully created PSRUN in directory: /opt/oracle/psft/pt/tools/bin
./psrun.mak - linking PSRUNRMT for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
./psrun.mak - Successfully created PSRUNRMT in directory: /opt/oracle/psft/pt/tools/bin
[psadm1@psovmfscmfp2 setup]$The err files are empty :
-rw-r--r-- 1 psadm1 oracle     0 Sep 13 07:26 psrun.err
-rw-r--r-- 1 psadm1 oracle     0 Sep 13 07:26 psrunrmt.errSo far, so good now. We are able to test again the sample COBOL... until next failure.
Yes, unfortunately, it fails again. But good thing, the log is not empty now :
PSRUN: error while loading shared libraries: libcobrts64.so: cannot open shared object file: No such file or directoryThat's probably coming from some missing libraries during the psprcs.cfg configuration. Let's use the same env. variables settings as for psadm1 when compiling COBOLs.
[psadm2@psovmfscmfp2 appserv]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm2@psovmfscmfp2 appserv]$ export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
[psadm2@psovmfscmfp2 appserv]$ export PATH=$COBDIR/bin:$PATH
[psadm2@psovmfscmfp2 appserv]$ ./psadminReconfigure, restart prcs and re-test... SUCCESSFULLY !!!!!!!!!!!!!!!!!!!!!!!!!
Log from PTPDBTST process shows :
SUCCESSFUL DATABASE CONNECTION
SUCCESSFUL DATABASE DISCONNECTWhat a pain !
I did not go further, but we could expect the same issue within the Application COBOLs, since the cblbin directory is also empty out there.
According to psprcs.env, there're two values for COBDIR and the one for the applications cobol is empty :
[psadm2@psovmfscmfp2 PRCSDOM]$ more psprcsrv.env
INFORMIXSERVER=192.168.1.149
COBPATH=/opt/oracle/psft/pt/apptools/cblbin:/opt/oracle/psft/pt/tools/cblbin
PATH=/opt/oracle/psft/pt/apptools/bin:/opt/oracle/psft/pt/apptools/bin/interfacedrivers::/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:/opt/oracle/psft/pt/tools/appserv:/opt
/oracle/psft/pt/tools/setup:/opt/oracle/psft/pt/tools/jre/bin:/opt/oracle/psft/pt/bea/tuxedo/bin:.:/opt/oracle/psft/pt/oracle-client/11.2.0.x/bin:/opt/oracle/psft/pt/oracle-clie
nt/11.2.0.x/perl/bin:/usr/local/bin:/bin:/usr/bin:/opt/oracle/psft/pt/tools/bin:/opt/oracle/psft/pt/tools/bin/sqr/ORA/bin:/opt/oracle/psft/pt/tools/verity/linux/_ilnx21/bin:/hom
e/psadm2/bin:.
[psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/apptools/cblbin
[psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/tools/cblbin
PTPCBLAE.gnt PTPDTTST.gnt PTPECOBL.gnt PTPLOGMS.gnt PTPRATES.gnt PTPSQLGS.gnt PTPTESTU.gnt PTPTSCNT.gnt PTPTSLOG.gnt PTPTSTBL.gnt PTPTSWHR.gnt
PTPCURND.gnt PTPDTWRK.gnt PTPEFCNV.gnt PTPMETAS.gnt PTPRUNID.gnt PTPSQLRT.gnt PTPTESTV.gnt PTPTSEDS.gnt PTPTSREQ.gnt PTPTSUPD.gnt PTPUPPER.gnt
PTPDBTST.gnt PTPDYSQL.gnt PTPERCUR.gnt PTPNETRT.gnt PTPSETAD.gnt PTPSTRFN.gnt PTPTFLDW.gnt PTPTSEDT.gnt PTPTSSET.gnt PTPTSUSE.gnt PTPUSTAT.gnt
PTPDEC31.gnt PTPECACH.gnt PTPESLCT.gnt PTPNTEST.gnt PTPSHARE.gnt PTPTEDIT.gnt PTPTLREC.gnt PTPTSFLD.gnt PTPTSTAE.gnt PTPTSWHE.gnt PTPWLGEN.gnt
[psadm2@psovmfscmfp2 PRCSDOM]$The directory "/opt/oracle/psft/pt/apptools/cblbin" is owned by psadm3 and hosted on the database server (nfs mounted), so I assume we also need to set proper values for env variables, and compile the COBOLs before being able to use them.
To resume what I did to make the COBOLs working on this PSOVM :
1. As root, start LMF (this has to be done only once)
cd /opt/oracle/psft/pt/cobol/microfocus
./mflmman
2. As psadm1, set proper env. variable and compile (setting env variable has to be done each time you want to compile COBOLs)
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
export PATH=$COBDIR/bin:$PATH
cd $PS_HOME/setup
./pscbl.mak
./psrun.mak
3. As psadm2, set proper env. variable and reconfigure psprcs.cfg, restart, restart (setting env variable has to be done each time you want to start the process scheduler, so probably better to append these in the .bash_profile)
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
export PATH=$COBDIR/bin:$PATH
cd $PS_HOME/appserv
./psadmin
4. Same as step 2, but with user psadm3.
HTH,
Nicolas.
PS: will it be the same issue on the HCM template delivered at the same time ? To be tested as well.
PS2: and yes, I tested it twice before posting, result is same.
Edited by: N Gasparotto on Sep 13, 2012 5:17 PM

Fortunately, the COBOL issue does not exist on PSOVM HCM9.1 FP2 PT8.52.06 delivered in July 2012 (v3). COBOL are properly compiled (tools and app COBOLs), cblbin is not empty and they run successfully on the first shot.
Nicolas.

How do we let Apple know about the Apple ID Issue?

Hi, there seems to be an issue (Apple's end) with signing in to the Itunes store and the Mac App store. How do we let them know about the issue? Their service status shows all green lights so it seems they are not aware of the problem.... I don't know about you but I'm getting really frustrated.. !! PS It seems that my warranty has expired so I don't have direct access to their support ?! HEEEEEEEEELP! THAAAAAANX!!!!!
Milan, Italy, March 11

Hi valelorandi,
I understand that you are seeing an issue with your connection to the iTunes Store and Mac App Store. I have an article for you that will help you address this issue, and it can be found below:
Can't connect to the iTunes Store - Apple Support
https://support.apple.com/en-us/HT201400
Thanks for using the Apple Support Communities. Have a good one!
-Braden

About the BBM messenger registration status

Similar Messages

Maybe you are looking for