About the incoming call display

As I see the demonstrations of iPhone, when there are incoming calls, the caller's picture is just very small, at the top left corner, while the background is the wallpaper. But that isn't the case in my own iPhone, how can I make it like those demonstrations?

This depends on how you added the contact photo to the contact.
You can either add a photo to a contact via the iPhone or you can add a photo via a contact via the contact program you use that communicates with iTunes and syncs into phone. Most of the programs below support adding some sort of photo to a contact. Some may not.
Outlook 2003 Service Pack 3
Outlook 2007 Service Pack 1
Mac Address Book
Windows Address Book
Windows Contacts
Entourage
Google and Yahoo Address Book

Similar Messages

Full screen incoming caller display 2730 classic

Is there a way of making the phone display the incoming caller display larger, when your driving and using Bluetooth its almost imposable to read the number or name of caller
I know the font size can be changed for other applications but this one is a must as it could be quit dangerous to try and read who is calling when driving
A full screen would be better

Is there a basic nokia phone that just makes and receives calls, text, and with Bluetooth with extra large fonts so the phone can be read, mostly for incoming calls
My 10 year old 6310i was good but the bluetooth let it down

Get info about the current call

I need a solution (eg ANE) for information about the current call - event of success, of duration, of ending.
Is that possible?

thx,
the example below shows some basic information.
Display myDisplay = Display.getDisplay(this);
Displayable dis = myDisplay.getCurrent();
int high = dis.getHeight();
int width = dis.getWidth();
boolean isCol = myDisplay.isColor();
int nubCol = myDisplay.numColors();more detailed information about model, aren't available through the standard api, on blackberry's there some restricted apis that provide these device-type and other detailed information...
for more basic information, just look at the class-methods from display and displayable...
mmkl

The J5780 answer anywere to the incoming calls

Dear Customer support,
I've already setted up the J5780 in the menu 4 - 2 for NOT AUTOMATICALLY ANSWER, but the machine always answer to the incoming calls.
We use that for only SEND faxes and we want disable the answering options.
I done something wrong?
Can you help us?
Thanks a lot!
Francesco Rondoni

To the best of my knowledge.
Yes device will be registered on network and will "receive calls" - the person who has it should not have option to pick those with lost mode.
wifi connection is usually not automatic, unless device is around previously known network, but cellular connection is established and reconnects.
Information that police gave you, about ability to trace IMEI is unknown to me, but I do not work for the police, they know better. (hopefully)

My phone is not ringing on all incoming calls (the switch on the side is on at the time of the incoming call), what can I do to have all calls ring?

My iPhone 5 is not ringing on all of the incoming calls even though the side switch is on. Not sure what to do? Anyone else having this problem with incoming calls?

I had a friend with the same problem, he had Do Not Disturb ON, you can see if yours is ON, if it is, turn it OFF.
You can learn more about it here, Use Do Not Disturb on your iPhone, iPad, or iPod touch

Why did Apple change the incoming caller photo Id to a small picture in a small circle instead of the large full screen picture when calls are received? This is useless. If it isnt cchanged back to the way it was I am done with the iphone. Hello Galaxy

This will be my last iphone if thhis minor software issue is not cleared up. I hate the new caller ID incoming picture. Too small

We are all users like yourself. No one here is an employee or representative of Apple. We cannot know why the photo of the incoming caller was changed. We can only say that it is what it is. If that feature change is enough to make you want to change phones then get the phone that best suits your needs. In the meantime you can send feedback to Apple here:
http://www.apple.com/feedback/iphone.html

How to show company name and contact name on the incoming calls of iPhone 4

Kindly provide me with a useful solution of how to show company name and contact name on the incoming calls of iPhone4.
even with an application or from the setting of the iPhone itself, but without telling me a solution like writting the company name in the contact name field.
This is a very important option, i think it is a must, not an option and apple should fix this problem fastly. because it is already available in the older models of iPhone like iPhone 3G and 3GS.
How an important feature like this could be available in old models, but in the later models is not available?

Currently not possible without putting the company name in the contact name's field. AFAIK, it's never been available on any iOS version.
You might check the App Store for an app that can do this although I'm pretty sure you won't find one.
http://www.apple.com/feedback/iphone.html

%CALL_CONTROL-6-CALL_LOOP: The incoming call has a global identfier already present in the list of currently handled calls.

000049: Oct 26 14:51:04.181: %VOICE_IEC-3-GW: H323: Internal Error (H323 Interwo
rking Error): IEC=1.1.127.5.21.0 on callID 261 GUID=80316352D0FE011E02002302A5CC
B8F9
000050: Oct 26 15:24:50.315: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a
global identfier already present in the list of currently handled calls. It is b
eing refused.
000051: Oct 26 15:24:50.315: %VOICE_IEC-3-GW: CCAPI: Internal Error (Incoming lo
op): IEC=1.1.180.1.28.0 on callID 0
000052: Oct 26 15:24:50.315: %VOICE_IEC-3-GW: H323: Internal Error (H323 Interwo
rking Error): IEC=1.1.127.5.21.0 on callID 363
According to Cisco it says:
It means that the voice gateway has detected a loop in the call route
What debugs can I do to track this problem down.
All dial peers are like this. They are all voip dial peers with different destination-patterns and different session target IP addresses. No PSTN dial peers at all.
dial-peer voice 30000 voip
huntstop
destination-pattern 3[01]...
session target ipv4:192.168.99.4
dtmf-relay h245-signal
ip qos dscp cs5 media

Q: How long has this system been in place - is it a new system, or is this something that just started on a system that has been in place for awhile?
A: My customer says to me that this system has been in place for nearly a year and the problem started only a couple of days ago.
Q: If so were there any changes to the infrastructure, or the dialplan in particular?
A: Again this is the first question I asked and he said “NO CHANGES”. But that is what most customer say – right?
Q: Have you seen this occur in the past in the logs? If so how often do you see it?
A: Started on 26th Oct 2010. Since the problem started the router has been reloaded and the problem is still there. It is very intermittent and I have to do the debug when I get the problem.
Q: Have you tried to establish what is causing these: H323: Internal Error (H323 Interworking Error) ?
A: Not sure how to troubleshoot this. The explanation of this message on CCO is not that great.

How do you adjust the number of rings before the incoming call goes into voicemail?

How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

Set by your carrier, so contact them.

My i phone ringer is giving me a lot of trouble. It does not play any sound or music, the incoming call ringtone is working, but no music is playing. The problem itself disappears , and then reoccurs again. Anybody with same kind of problem, plz help !!!

the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!

Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback

HT2905 I do not have the so called "display exact duplicate" option... what do I do? I just updated itunes the other day. Yeah, I'm not happy!

I do not have the, so called, "display exact duplicate" option... what do I do now? I just dowloaded the new version of itunes the other day... yeah, I'm not happy!

Option + View > Show Exact Duplicates

HT1688 when traveling foreign countries, want to block the incoming calls for my iphone. 4

When traveling foreign countries,block the incoming calls. What is best way without turn off power? Thanks. camano8218

Put it in airplane mode (you can then enable wi-fi if you wish to use it).

How could I block the incoming calls to a specific number

How could I block the incoming calls and text messages to a specific number?

Contact your cell service provider.
Message was edited by: deggie

The incoming call screen

the incoming call screen, optional, i would like to see more information. Like company, job title, a special note

If you can somehow cram all of that info in the name field, otherwise no.

How to know if the incoming call is a diverted cal...

Hi,
I've Nokia 5230 mobile.
How can I know if the incoming call is a diverted call from another number?
Say I have two numbers A and B and I activated all calls divert from B to A.
If some one calls to B, it gets diverted to A. Then I've to find out in mobile A that this call is a diverted call.
In many other Nokia phones, it will show a small arrow next to phone symbol when the phone is ringing if the incoming call is diverted from another number.
Nokia 5230 also shows this small arrow but only for very short duration (1 sec). Generally no one will be looking at phone waiting for a call. when a call comes, we hear the ring tone and look at the mobile,, by this time the diverted arrow symbol is gone.
Is there any other way to find out if the incoming call is a diverted call? is there any application available for this kind of purposes?
Thanks,
Kamal

In your scenario phone A should show an incoming call from phone number B - is that not enough to recognise that the call is diverted from that number ?

About the incoming call display

Similar Messages

Maybe you are looking for