About the package fl.*

Hello guys !
Is it possible to have information about the package fl.* (like import fl.transitions.Tween)
Because i'm trying to use it with intelli J and i have compilation problem.
And by the way there is no trace of fl.* in the ActionScript Class Diagram
Thx

Ok thx
But i would like to use the package fl.* without using flash
In a pure actionScript 3.0 project, and when i try to import this package manually Intelli J (in my case) do not find this package.
So we can only use fl.* in flash or is there an other way to use it ?

Similar Messages

Specification about the package oracle.cle.process or oracle.clex

Where can i find specification about the package oracle.cle.process or oracle.clex?, particularly the class oracle.cle.process.ProcessInfo. I have not could find this specification anywhere, please help me to find it!
i wait for your help

This class is part of the MVC Framework. The homepage of this framework on OTN is http://otn.oracle.com/products/ias/9ias_utilities.html#mvc. You can download the user guide and javadoc there. The source code is not publicly available.
Steven Davelaar,
JHeadstart Team.

Dear sir , i was wondering about the package summer sim . It forever or just fo

Dear sir ,
i was wondering about the package summer sim . It forever or just for limited time if is limited what going on after two months ?
i'm glad to hearing from you .

For 2 months you get 100GB data free each month having topped £10 to buy the initial pack. Thereafter it becomes an ordinary PAYG SIM where you just make calls /texts against your credit or buy packs.

Question about the packages for OS Linux

Hi all,
this is little weird question but I could not find the answer on net so trying to get some out here:
I need to have list of package requires for oracle (9.2.0.4 & 10.2.0.4) vesion for OS Linux
I know it is old versions of oracle but app and management requires this soon!! please guide!!
thanks

Hi,
Below note mentioned required packages
Requirements For Installing Oracle10gR2 On RHEL 5/OEL 5 (x86_64) (Doc ID 421308.1)
For oracle 9i, below packages are required
$ rpm –q make-3.79.1
$ rpm –q gcc-3.2.3-34
$ rpm –q glibc-2.3.2-95.20
$ rpm –q compat-db-4.0.14-5
$ rpm –q compat-gcc-7.3-2.96.128
$ rpm –q compat-gcc-c++-7.3-2.96.128
$ rpm –q compat-libstdc++-7.3-2.96.128
$ rpm –q compat-libstdc++-devel-7.3-2.96.128
$ rpm –q openmotif21-2.1.30-8
$ rpm –q setarch-1.3-1
Kernel parameters
Kernel
Parameter     Setting To Get
You Started     Purpose
Shmmni     4096     Maximum number of shared memory segments
Shmall     2097152     Maximum total shared memory (Kb)
Shmmax     2147483648     Maximum size of a single shared memory segment
Semmsl     250     Maximum number of semaphores per set
Semmns     32000     Maximum number of semaphores
Semopm     100     Maximum operations per semop call
Semmni     128     Maximum number of semaphore sets
file-max     65536     Maximum number of open files
ip_local_port_range     1024 - 65000     Range of ports to use for client connections
rmem_default     1048576     Default TCP/IP receive window
rmem_max     1048576     Maximum TCP/IP receive window
wmem_default     262144     Maximum TCP/IP send window
wmem_max     262144     Maximum TCP/IP send window
For more information kindly refer installation guide
Thanks,
Krishna

How to knoq the package name

hai
how can i know about the package name
suitable answer will be given suitable points
kumari

Hi
Very simple
Click on systems in menu bar and click on Status
Click on programme name
Then Go Goto in the menu bar and click attributes u can see the package namelike pbas
All the best
madhu

Info about the linux-firmware package and rt2780-usb-fw

Hello,
I have a have question about the linux-firmware package in the repo.
Recently there was an update for this package and when I checked its contents I saw that it also updates rt2870usb-fw.
Maybe I am a bit confused about the all kernel modules / firmware, but since I need to compile the latest kernel (linux-mainline from AUR) to get my buffalo wireless usb work(my rt2870 is supported from rc4), would it be possible to update only this package and use the kernel in the arch repo?
I can't test it myself because I am out of town for while.
Thank you

Hello,
I have a have question about the linux-firmware package in the repo.
Recently there was an update for this package and when I checked its contents I saw that it also updates rt2870usb-fw.
Maybe I am a bit confused about the all kernel modules / firmware, but since I need to compile the latest kernel (linux-mainline from AUR) to get my buffalo wireless usb work(my rt2870 is supported from rc4), would it be possible to update only this package and use the kernel in the arch repo?
I can't test it myself because I am out of town for while.
Thank you

Questions about the 'filesystem' package

After reading some recent threads and bug reports about the 'filesystem' package, I have the following questions:
1. What is the reason for adding systemd-related users and groups to this package? Why not add them using the install script in the systemd package?
2. Why ship /etc/{shadow,gshadow} files at all? Why not create and manage them by `pwconv`, `grpconv` and such (perhaps by an install script in the shadow package)?
Last edited by ackalker (2014-06-27 17:12:52)

I didn't mean the dev ML, arch-general will do just fine. arch-dev-public is read-only fro non-devs and non-TUs.

I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference my self, how do I go about doing that? I have not open the packaging yet.

I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference, how do I go about doing that? I have not open the packaging yet.

Hi
Thanks for that. Yes, the ipad was purchased recently. I called Apple last Friday and they ask for the receipt. I wonder if anyone were able to swap their ipad for a larger storage in the past at the apple store without a receipt? 16Gb is such a small storage.

Question about xmonad package in the repos.

When I
sudo pacman -S xmonad
it installs xmonad and ghc goodness. But one thing that has always bothered me is that I had to hunt down a default .xmonad/xmonad.hs config file for xmonad. Can anyone explain why the package doesn't come with a default configuration file?

xmonad's "default config" is no config. i believe the file you want is buried somewhere in /usr under a different name. if you poke around xmonad.org you can find the path/name to that file but also a copy/pastable (albeit older) version of it.
i think it's done this way b/c the tweaking method is different with xmonad. it's not like editing /etc/xmonad.hs and putting it in ~, you actually /load/ the defaults into ~/.xmonad/xmonad.hs and then /override/ them with your changes. this is done with a simple main function like this:
main = do
xmonad $ defaultConfig
and whatever's between { } (explicit commands or calling of functions) is passed through the defaultConfig, picking up any settings not yet set, then fed to xmonad.
so unlike other WMs where you copy a default config and edit it from there. in xmonad, you load the default config into yours with $ defaultConfig and put your tweaks (and only your tweaks) in xmonad.hs. bit of a change in thinking.
/edit: yes Xyne, i second Ashren. it's a wonderful WM and haskell's awesome. my xmonad.hs is available in my sig if you want it, i'm fairly proud of it.
Last edited by brisbin33 (2009-07-31 16:49:10)

About the use of JWSDP-1.2 package

I had installed the JDK1.42 and JWSDP-1.2 package in Win2000.According to
the Jwsdp's documents, I had set the some environment variables, like "java_home"
"jwsdp_home","path'. When I used the examples of Jwsdp, using Ant to compile and run is ok; but when I compile it mannully, this is to say ,using the javac instruction, error ocurred for it cannot find the package of javax.xm.*.
How can i set my environment variables to use the Jwsdp easily?
thanks.

copy the jwsdp library jars to either $JAVA_HOME/lib/ext/ (find the lib directory and inside that the ext directory). Any jars in this directory will be included when you compile/execute.
or set your class path whilst compiling
javac xx.java -classpath $JWSDP_HOME/saaj/lib/saaj-api.jar:$JWSDP_HOME/saaj/lib/saaj-impl.jar
(use : in linux, ; in windows to seperate jar files)

About the class packaging problem

I used JBuilder 3 and 4 before and packaged some java classes together
but now when I want to use earlier version of the JBuilder like 2007, the import can't resolve some of the packages.
Any suggestions please.

I think it doesn't know them.
Do I need to add a JAR to the project manually? Yes, when you add a JAR you are telling JBuilder where to look which in turn sets your classpath, without this it will never find it.
Do I need to do other operations before to add it?
Because when I choose "Add JARs", there is nothing
for me to add.Well I take it that it opens a File Chooser of some sort, you should then navigate to your JAR on drive.

I didnt found Sim eject tool at the package i want to complain about it

hello
i didnt found the Sim eject tool in the package
i want to make a compalin

You are not speaking to Apple here, just other users.
iPhones that come with a SIM do not include a ejector tool. No SIM free iPhone 6es are sold in the US at this time.
Use a paper clip.

Re: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't forget about the regular expression potential

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

How can I have an english interface to labview if the package is in german

Hi ,
I'm a student that makes a project in Germany using labview ... the problem is that my german is not that good , and the labview is in german so here is my question :
how can I have an english interface to labview if the package is in german (labview 7 )
Any help would be apprecieted.

The only way to really have everything in English is to install an English version of LabVIEW. You may want to talk to your local NI sales representative about the possibility of getting a different version.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

About the package fl.*

Similar Messages

Maybe you are looking for