About the repairs function in SE10

Dear experts:
     Can anyone tell me the repairs function in detail  in tag 'Global Information' in T-code:SE10?
    Thanks,
     feng
Edited by: feng Qiu on Nov 14, 2008 8:31 AM

Anyone who know that please tell me ,thanks!
Regards,
feng

Similar Messages

  • Some question about the renegotiation function in SRM Contract (GOA)

    Hi All Expert,
    We are on SRM 5/4.6,  there is a question about the renegotiation function in SRM GOA.
    Can we renegotiate the price for some parts in the GOA items with this function ( e.g. Only renegotiate one item in the contract) ?
    Will the item price updated automatically after the renegotiation?
    Many thanks in advance!!!
        Wendrin

    Hi Sanjeev,
    Many thanks for your help.
    One more question, if I add a new item when we renegotiation, will it be transfered to contract and create a new item after that?
    Thanks and best regards
    Wendrin

  • TS2446 Hi,  had the disabled message this morning, but nervous about the reset function as asking me for my full debit card details.  Will change passwords regardless, but is this a scam or not?

    Had the disabled message on my email this morning.  Nervous about the reset function as asking for bank details.  Is this a scam?
    Thanks

    Hi,
    thanks for the comments and help guys.
    the email address i received from is this one "[email protected]",
    Which I would assume to be ok, but it is the payments link that I'm concerned about.  Wanting bank sort codes, security number, etc.  really not comfortable giving that out to anyone at any time

  • Can anyone tell me about the Training Function?

    Hi, friends
    I am a fresh man learning Siebel and I find very little information about the training function in Bookself. Can you tell me where I can find the related information?
    thanks.

    Hi,
    what kind of treinament you find? A techical/functional treinament, a user application treinament.
    If techinal treinament, the bookshelf is the better document to find information. You can use the forum, sites and Oracle Metalink to find you doubts.
    If user application treinament, where user use the application and find about how to execute a process, you can use IHelp or your company can use Oracle UPK (User Productivity Key). You can create treinament in this tool and your users can acess the treinaments.
    Regards.

  • About the filter function in OBIEE 11g

    Hi, all.
    when i use the filter function in OBIEE 11g, it turn out a wrong result.
    The operation steps and detail are described as follow:
    1. In the Column Formula pane, I typed the Formula of the column 'count of customer' as:
    FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))
    2. But the phisical SQL about this column in the NQquery file is that: "count(distinct(T11520.CUSTOMERID)) as c5, "
    which means that, the filter wasn't applied, right?
    If so, what shall I do in this situation, in other words , how can i make a Condition COUNT？
    Any Suggestion is appreciated!
    Thank you in advance~~O(∩_∩)O~

    Hi katherine,
    FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))I think your formula there is mistake like many braces...instead type this in your f(x)
    =>Filter(count(distinct customer_id) USING trade type='001')
    This filter function is same like a case statement,if you filter still gives error write a case statement
    CASE WHEN TradeType Dimesion.TradeType='001' THEN count(distinct customer info dimesion.customerID) ELSE 0 END
    Will it be helpful?,follow this etiquette http://forums.oracle.com/forums/ann.jspa?annID=939
    By,
    KK

  • I have a question about the Siri function.

    Here in Belgium, we speak Dutch and also French and English. But I think when you use the Siri function it is always easier to use it with your own language ( Dutch). 28th October, the iphone4S will be launched here in Belgium, but only with a Englisch version of the Siri function. So my question is that you have any idea when te Dutch version will be available in Belgium, or when i buy an iphone 4S with English version that I can update it to a Dutch version when it will be launched..
    Thank you for helping
    Dylan

    Nobody here can tell you anything more about Apple's plans than what they have already publicly stated, which is that more languages were promised for later (including Japanese, Chinese, Korean, Italian, and Spanish in 2012).

  • Please suggest about the MM;functional module.

    Hi All,
    Myself Megha, i am new in the SAP world and would like all you gurus to guide me with right path.I am an Engineer in IT with 2 years of work x in Network Aminstraton, As per my qualifications i am eligble for SAP technical module(Basis), but my personal intrest is in retail sector. So i want to go for MM module(Procurrement).
    If you guys can suggest me about the technical difficulties and future prospectives, then it will be a great help.
    THANKS
    Megha Mittal

    Hi..
    to sum up MM .. and life cycle
    MM – Material Management
    MM module allows the company  to manage  on time the
    stocks, procurement, and purchase templates.
    - Purchasing,
    - Inventory Management
    -      Consumption Based Planning
    -      Logistics Invoice Verification
    -      External Services Management
    -      Evaluation
    -      Supplier Workspace
    -      Information systems
    comming to procurement ..
    Procurement starts with requirement which is triggered by MRP. Requirement can be Dependent Requirement (Sale Order, Production Order) or Independent Requirement (Stationery Requirement).
    Procurement: Procurement just not involves procuring of material. When a Requirement Triggers, right from creation of Requisition to sending the Purchase order to vendor is taken care by Procurement. This involves creation of Requisition, approval of Requisition, creation of RFQ if needed, converting of Requisition to Purchase order, identifying medium to send PO to vendor, and PO monitoring.
    1.  Initial Screen    Dead Line  Purch Org  Purch Grp
    2.Collective
    3.Item Detail   Material  Qty
    4.VendorDetails
    Few Transaction Code:
    ME51n: Create PR
    ME52n: Change PR
    ME53n: Display PR
    ME54n:  Release PR individually
    In a PO, materials or services can be procured for all the Plants attached to the Purch
       Org. for which PO is created
    Standard PO, Subcontracting PO, Consignment PO, STO and Third Party PO are
          different types of PO and they are differentiated with Document Type.
    Document Overview screen PO, displays different Purchasing documents like RFQ, PR,      other PO’s.
    with regards,
    hari kv

  • Misconception about the LAG function's ... functionality?

    So I want to look at the value of a column on a current row, and the value of the same column on the most recently entered row, prior to the current. The problem I'm encountering is that for the current row, I'm only interested in those added last month. So, if the record that I'm seeking in the LAG function is prior to last month, it gets rejected from the resultset.
    create table check_lag
    (filenr number, code varchar2(2), create_date date);
    insert into check_lag values (1,'02',to_date('9/5/2008','MM/DD/YYYY')); -- current
    insert into check_lag values (1,'01',to_date('9/1/2008','MM/DD/YYYY')); --lag record, same month
    insert into check_lag values (2,'02',to_date('9/10/2008','MM/DD/YYYY'));-- current
    insert into check_lag values (2,'01',to_date('8/10/2008','MM/DD/YYYY'));-- lag record prior monthSo this query's results made sense
    SELECT FILENR, CODE,
           LAG( CODE ) OVER( PARTITION BY FILENR ORDER BY FILENR, CREATE_DATE ) AS PRIOR_CODE,
           CREATE_DATE
    FROM   CHECK_LAG;
    FILENR CODE PRIOR_CODE CREATE_DATE
    1      01              9/1/2008
    1      02   01         9/5/2008
    2      01              8/10/2008
    2      02   01         9/10/2008But as soon as I add a WHERE clause which set's a boundary around last month, I exclude a LAG record
    SELECT FILENR, CODE,
           LAG( CODE ) OVER( PARTITION BY FILENR ORDER BY FILENR, CREATE_DATE ) AS PRIOR_CODE,
           CREATE_DATE
    FROM   CHECK_LAG;
    FILENR CODE PRIOR_CODE CREATE_DATE
    1      01              9/1/2008
    1      02   01         9/5/2008
    2      02              9/10/2008I know that I could push this into an inline view, and provide the WHERE clause with the date range after the inline view is processed, but this is a huge table with an index on the CREATE_DATE, and so the following forces a table scan
    SELECT *
    FROM   ( SELECT FILENR, CODE,
                    LAG( CODE ) OVER( PARTITION BY FILENR ORDER BY FILENR, CREATE_DATE ) AS PRIOR_CODE,
                    CREATE_DATE
            FROM   CHECK_LAG )
    WHERE  CREATE_DATE BETWEEN TO_DATE( '09/01/2008', 'MM/DD/YYYY' )
                           AND TO_DATE( '09/30/2008 23:59:59', 'MM/DD/YYYY HH24:MI:SS' )
    AND    PRIOR_CODE IS NOT NULL;
    FILENR CODE PRIOR_CODE CREATE_DATE
    1      02   01         9/5/2008
    2      02   01         9/10/2008Is that just the way things are, or am I missing out on another approach?
    Thanks,
    Chuck

    Hi, Chuck,
    Thanks for including the CREATE TABLE and INSERT statements.
    When you use" ORDER BY <single_column>" in an analytic function, you can restrict it to a range of values relative to the ordering value on the current row.
    For example, you could say
    ORDER  BY create_date
    RANGE  BETWEEN  60 PRECEDING
               AND  30 PRECEDINGif you only wanted to consider rows that were no more than 60 days earlier, but at least 30 days earlier.
    It's a little more complicated for your problem, because you can't just hard-code numbers like 60 and 30; you have to compute them for every row.
    SELECT     filenr
    ,     code
    ,     LAST_VALUE (code) OVER
         ( PARTITION BY     filenr
           ORDER BY     create_date
           RANGE BETWEEN     create_date - ADD_MONTHS ( TRUNC ( create_date
                                        , 'MM'
                                   , -1
                                   )     PRECEDING
              AND     create_date - TRUNC ( create_date
                                 , 'MM'
                                 )          PRECEDING
         ) AS prior_code
    ,     create_date
    FROM     check_lag;You could probably get the same results using LAG, but this is exactly for what LAST_VALUE was designed.
    Windowing is described in the [SQL Language Reference manual|http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/functions001.htm#sthref972] in the section for "analytic functions" in general.

  • About the GetHostTCPSocketHandle() function

    Hello,
    I'd like to know if the 2nd parameter of the function is corresponding to the "SOCKET" type in the Windows SDK? Can you tell me the usage of this function? Thanks.
    David 

    Phototype:
    int GetHostTCPSocketHandle(unsigned int Connection_Handle,int *Socket_Handle);
    Connection_Handle: TCP Support Library conversation handle that you obtain from ConnectToTCPServer or ConnectToTCPServerEx or receive in a server callback as the handle parameter of a TCP_CONNECT message.
    *Socket_Handle: System socket handle for the connection that connectionHandle identifies. (passed by reference);
    Status: Return value indicating whether the function was successful. Unless otherwise stated, zero represents successful execution and a negative number represents the error code.
    You can call the GetTCPSystemErrorString function to obtain a system message that describes the error. The system messages can be more descriptive than the TCP Support Library error codes. To obtain the correct system error message, you must call GetTCPSystemErrorString immediately after calling the TCP Support Library function that failed.
    For functions that read or write data (ClientTCPRead, ClientTCPWrite, ServerTCPRead, ServerTCPWrite), if the function was successful, the return value is the number of bytes transferred.
    You can have a maximum of 255 concurrent conversations and up to 1,024 connections. If you exceed this limit, -kTCP_TooManyConnections will be returned. You may not be able to open the maximum number of connections allowed by LabWindows/CVI because of limitations imposed by the operating system.

  • Question about the Wait Function

    I wrote a VI to store the time stamps in a text file.
    I fond something strange in the text file (see the picture below).
    The time stamps weren't writen into the file every 10 ms! How could this happen? And how could I fix it and make the time stamp to be writen every 10ms?
    Thanks a lot!

    To further what was just said:
    The wait function will indeed wait 10ms, or near enough as I will soon explain.
    When used in a loop, the wait function will wait for 10ms AFTER the code inside the loop has been executed.
    Depending on your Operating System, and the speed of your PC, the code inside the loop could take several hundred milli-seconds to execute.
    So the total time for each loop iteration, and thus the time between file writes, will be (Xms + 10ms), where X is the time taken to execute the other code.
    Another thing to consider is that unless you are using a Real-Time OS, your Windows or Mac OS will not prioritise LabVIEW! The execution of your code must run alongside your virus scanner, email client, music player etc. etc. etc.
    As such, it is often asking too much to try to use labVIEW in accuracies of +/-1ms on the common desktop PC.
    As a final note: I cannot give facts on file writing, but just from my experience with LabVIEW a file write every 10ms is impractical as the write-to-file VI usually takes longer than 10ms to execute itself. Why not buffer up 10 writes/pieces of data/whatevers and then write them all to file at once? Whilst we are at it, why not buffer 100 pieces and then write them all at once?
    I have had this idea argued before, with people saying that if the system were to crash then the buffered up 100 reads would be lost. Remember guys: that labVIEWs write to file VI passes the data to the windows write buffer, and windows doesn't necessarily put it on disk straight away! That can only be guaranteed by closing the file reference or flushing the queue.
    Apologies, I have diverged.
    Rhys
    Applications Engineer
    National Instruments

  • Question about the alarm function.

    Has anyone used the alarm function on the iPhone?
    This may be a dumb question, but does the phone need to be in sleep mode, not shut off for alarms to work? If that is the case (I expect it is) would it be best to leave on while charging overnight for an early morning alarm to work properly?
    I think I've answered my own question, because I doubt an alarm can go off if the phone is off, but probably would if it was just asleep. Any thoughts on the alarm function in general?
    Thanks,
    CD3

    CD3, I would also assume the same but I do not really
    know the answer. To answer your question, yes. I use
    the Alarm function everyday thought I do not know why
    as I get up before the !@# thing wakes me up.
    Your answer is funny. I only need the alarm to wake me for a flight I'm taking to a show in Denver in Sept. Don't want to miss the flight because the alarm didn't work because the phone was completely off.
    So the non lazy way to answer my question...I'm going to try it myself. If it works one way or the other I'll mark my question answered and get myself a point or 2
    CD3

  • A question about the save function

    How does the save function work in the following flash
    application(in fact,this is a game)??
    Line
    Rider

    Good work
    There is something know as MMSave
    and also look out for file referrence class

  • Can someone tell me where to get information about the search function in Swift

    I need to put a search function into an app I am building and I have no idea where to look for information as to code, where to put the code and the text that it is going to search ( a book's worth) where do I put that file.  Any help would be great.  Thank you in advance.

    Dipak,
    Two things to try:
    1. Check the Oracle8i EJB and CORBA Developer's Guide. It is available online from OTN in the documentation area.
    2. Posting your note to the Oracle8i JVM technical discussion forum.

  • About the UPDQA** function

    HI Sap gurus,
    I have implemented a PCR for the Roll-Over of the vacation from this year to previous year.
    The PCR is
    VARSTCURMO
    (LEAVE BLANK)
    12
    VARSTREDAY
    (LEAVE BLANK)
    31
    HRS=FR02C
    ADDDB1234Z
    01 (IF IT IS JANUARY)
    VARSTREDAY
    (LEAVE BLANK)
    01
    HRS=L1234
    HRS?160
    (greater than)
    HRS-160
    UPDTQA02
    (less than or equal to)
    UPDTQA02
    But the value in the ABWKONTI table are not getting updated.
    I have called this PCR using ACTIO and P2006 but it didn't work .
    In the schema I have called it before CUMBT function.
    The Value is present in Time Type 1234 but it's not updating Quota's.
    Please help me in this matter as deadline for this task is approaching.
    Thanks,
    Leela.

    Hi Sagarika,
    It's working fine now, but we have set the recalculation date as 01/01/2003 for testing purposes.
    Even I run time evaluation with database update it's starting from 01/01/2007 which is hire date of the employee.
    If once Time Evaluation is Run and Database is updated then it should run from the Date from where the Time Data has been changed or from the last Date when the Evaluation is Run.
    Sagarika can you give it was running like this before implementing the above rule.
    But Now it's not doing that .
    Can you Explain.
    Thanks,
    Leela.

  • About the importData function

    Dear All,
    I wanted to load the xml file using url of a server. I have tried by putting the local url in the parameter section of ImportData() function.
    How to put url in that function
    Thank you
    Saroj Neupane

    The cDIPath parameter to importDataObject is defined in the API Reference as:
    > cDIPath
    > (optional) A device-independent path to a data file on the users hard drive. This path may be absolute or relative to the current document. If not specified, the user is prompted to locate a data file.
    Note that is says "on the user's hard drive". You cannot pass a URL to this function.

Maybe you are looking for