About the sap mails
if sales order or purchase order rises then automatically send sap mail to the customer or vendor. and tell me how to use the nace t-code.
for sending sap mail ,
create a z object of your sales order or purchase order , by copying the standard program and include the logic of creating spool request for sending it as mail . please use the below link for logic of sending as mail.
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
then , place the z object which you have created in the NACE transcation , output types for sales order or Purchase order .
there will be an option in the output types as tabstrip as' mail' , call the z program and give the layou also either z layout or original layout as per Country specific .
reff : you can see the default program where it is called in general data , the program and formroutine are called yo can give the same in the mail tab also .
Regards,
welcome your Queries
Regards ,
Girish
Similar Messages
-
The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?
You hit the target CT.
It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
I hope to make some sense here. -
Can any one explain about the SAP Testing process in Implementation Project
Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..
hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus -
Please let me about the SAP transaction code(s)
Please let me about the SAP transaction code(s) from which I will get monthly data of the folowing:
Material or product wise listing of raw materials used in WIP & converted to Finished goods remaining as closing stockDear parameswar
The simple work is go to MM60, give material type ROH (for raw material) and execute. You will get list of all raw materials. Make a note of it and now go to MB51, give those material codes and give movement type 261 for issue from stores and execute. You will get raw materialwise details of how much quantity has been issued to WIP. The same exercise you have to do for FERT.
thanks
G. Lakshmipathi -
Please let me about the SAP transaction code(s) from which I will get month
Please let me about the SAP transaction code(s) from which I will get monthly
Material or product wise listing of cost of finished goods sold & lying as stockDear parameswar
Go to SE16, give the table MBEW and select the following fields:-
VERPR - If you want to see the moving average price of that particular material
STPRS - If you want to see the Standard price of that particular material
SALK3 - If you want to see the total valuated stock of that particular material
To see how much stock is available, run MMBE and execute. You can also check in MC.9 (mcdot9)
thanks
G. Lakshmipathi -
Query About the SAP ABAP Module
Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj ChaturvediHello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi -
Question about the new Mail shiped with Lion
Hi,
I've this quick one to the Dev's which have already worked with Lion's Mail.
Would it be possible to do simple file copy from Snow Mail to Lion Mail ?
I am not asking about the migration possibilyties during upgrade because my current MBP is a Core Duo one and therefore can't use them for Lion.
My MBP 2006 needs to be upgraded soon :-) and will take place in the comming weeks. And I am wondering how to transfer my current mails to the new platform OS since Lion Mail is upgraded as well.
Is the Filesystem Layout from Lion Mail the same as in Snow Mail which allows me to do a plain FS copy ?
Thxs in advance
olboHi,
I've just spent a good hour or so trying to work out how I can move my existing emails and mail accounts from my MacBook Pro (Snow Leopard) machine to my brand new iMac (Lion) machine.
Have not had much luck.
I copied over ~\Library\Preferences\com.apple.mail.plist and the files in ~\Library\Mail and ~\Mail Downloads.
When I start mail in Lion, it asks me for new email account information so has no idea of my existing accounts. Once I re-enter one of my email accounts, I get all my old folders but all the emails are missing....
Is there a simple way to copy accross the accounts and existing mails. I have tried the Migration Assistant, but I dont want to end up with a new account on the machine just to get the mail accross.
I'm pretty sure I did the same process between two snow leopard machines and it worked fine....
thanks for any help... -
About the sap script .......
wat does this statment means? can any one explain each of the line .........................
POSITION YORIGIN '+.0' LN
BOX WIDTH '24.0' CH FRAME 10 TW
BOX XPOS '+24.0' CH WIDTH '24.0' CH FRAME 10 TW
BOX XPOS '+48.0' CH WIDTH '24.0' CH FRAME 10 TW[Edit section] 3.2.3 Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
[Edit section] 3.2.3.1 BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position. Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame. Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below. Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
[Edit section] 3.2.3.2 POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
Reward if helpful.
rajyalakshmi -
About the SAP SD certification
Hi all ....i am doing MBA SAP ERP under the SAP University alliances Program certified.....i am very much interested to do certification in SD........can i eligible to attend the certification exam?....I attended so many seminars conducted by SAP education partners...They suggested me, If i want to do certification, compulsarily i have to do SAP training......otherwise i am not eligible to attend the certification...IS IT TRUE?.....please guide me to do certification.....
Please go for training + certification
Direct certification is only for candidates who have completed one full lifecycle of implementation and this experience has to be approved of by the employer and SAP Education.
Cheers!
Zub -
About The E-Mail Accounts in My Apple iPhone 4
I'm Using My E-Mail in My Apple iPhone 4 & My All My E-Mail Accounts have 0 E-Mails in them but in 1 of them I Have a GMail Account & I Don't have any Messages E-Mail in it at all & in that Account it has 1 E-Mail in it when I Really don't have No E-Mail in it at all, how do I Fix it where it can say 0 Again? I Tried Deleting the e-mail account & putting it back, still does the same thing, what happened? what do i do?
Hi Byron,
this is your friend Barbara - I'm just using a different name now.
Takes a while to get used to the new format, doesn't it? It's getting a little easier for me - finally! And that's how I finally found your question.
I see Ralph has answered your question - he is really good with iPhone stuff.
Oh, and don't forget to add your iMac to your equipment - this was difficult for me because I have so many different things, so there wasn't enough room to add it all. You might have to cut down and only list your iPhone once so you'll have room for the iMac. -
Sending mail to the sap mail box
In BP
what type of communication method to be maintained if i want to send message through actions to the creators sap inbox.Hello
Check the official SAP note>
Note 691303 - Sending E-Mail from message after status change
download Send_Mail_via_action.zip and what it
Note 733511 - ST 3: Sending e-mail with a link to a message
In case of issue post message, I did it at SOLMAN SPS 15 version 4.0/7.0 and it works.
Peter -
A question about the SAP Demo Example: OfficeControl in WebDynpro ABAP
Hello Experts,
I find some examples about WDA UI Element "OfficeControl" in packet SIOS. But some standard functions of Word are deactivated.
e.g in the following screenshots, MailMerge function is deactivated.
[screenshot|http://picasaweb.google.com/meerwu/DropBox?authkey=Gv1sRgCJy33JuwwsSVDQ#5390235805723698882]
Do you know, is it possible to activate all the word functions inside WebDynpro?
Many thanks!
meer
Edited by: Meer Wu on Oct 8, 2009 4:35 PM
Edited by: Meer Wu on Oct 8, 2009 4:36 PMAny inputs?
-
Function module to send the SAP mail to the recipient inbox. ...
Hi,
Can any one help me to send Email from function mudule to Reciepient inbox. For that do we need to configure SMTp/Exchange connector. Please suggest.
Thanks
Chimsik<b></b>Hi chimsik K:
Excellent, SAP 4.7E is built on WAS6.20 you can enable the SMTP plug-in; follow the steps mentioned in the following OSS Note 455140, let me know if you have additional questions.
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700011536752001
Regards,
Federico -
About the BB Mail developpin​g
I send a mail with an annex,using the bb's original program.Then I read that mail,using my own's program,but I cannot figure out that whether the annex is with the mail.
I have tried the following functions:
1,getContentType():the return is text/plain;
2,isMimeType("multipart/*"):the return is false;
3,getContent():the ruturned object type is TextBodyPart;
I am totally confused.
Solved!
Go to Solution.This is not the right board for this type of discussion.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
I'm a bit confused about the new Mail, Contacts prefs
Is anyone else a bit confused with all the new sharing features in the Mail, Contacts & Calendars panel? If I can create address book accounts directly, why would I need to share the "on my Mac" contact list?
Why is it that I can use the Microsoft Exchange for Google on my iPhone but it won't work in Lion? Has anyone gotten it to work?
Can anyone share how they have theirs setup and what do they use each one for?Yes, you can create a new site, publish to MobileMe and redirect your domain name to it. More info on that can be had here:
http://discussions.apple.com/thread.jspa?threadID=1164519&tstart=0
http://docs.info.apple.com/article.html?path=MobileMe/Account/en/acct17114.html
http://iwebfaq.org/site/iWeb_Domains.html
FWIW MMe tends to be much slower overall and has no ear to ear support in case you need it. For a personal site it's OK but for a commercial site you would be better off on a commercial hosting server.
OT
Maybe you are looking for
-
I want to downgrade my iphone 4 to IOS 6.1.3
Plz solve my problem as soon as possible
-
Outlook 2007 on XPsp2 OEM unable to connect to Exchange Server 2003??
Hi My outlook 2007 came part and package of the Microsoft Office 2007 Enterprise Edition, and our SBS server runs Exchange 2003. After setting up the connection in Outlook to connect too Exchange (when clicking test (check name) on configuration it i
-
How do I get photos from aperture to iPhone?
so far, photostream seems to be working fine as far as moving pics from my iPhone to Aperture 3/iPhoto. After the IOS5 update, I realized I have none of the pictures on my phone I originally had. Is there a new process to get pictures from Aperture /
-
WLC WLAN SSID L3 Security Passthru
With passthru security the end user get a pop-up warning about accepting the self signed certifcate from the virtual ip 1.1.1.3. Is there a way to replace the certificate with a trusted public certificate?
-
DOES Lightroom tether Canon 7D mike?
tried once - failed. have usb 3 ports on my mac. old 7D worked