About the SAP SD certification

Hi all ....i am doing MBA SAP ERP under the SAP University alliances Program certified.....i am very much interested to do certification in SD........can i eligible to attend the certification exam?....I attended so many seminars conducted by SAP education partners...They suggested me, If i want to do certification, compulsarily i have to do SAP training......otherwise i am not eligible to attend the certification...IS IT TRUE?.....please guide me to do certification.....

Please go for training + certification
Direct certification is only for candidates who have completed one full lifecycle of implementation and this experience has to be approved of by the employer and SAP Education.
Cheers!
Zub

Similar Messages

I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for thi

Hi,
I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly . I would like to prepare or get trained well before taking the exam as I see it costs around $500.
Thanks in advance for your help in this regard!
Sincerely,
J

Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
Please use some summarized title for your query.

What is the correct approach to the SAP HR Certifications?

Hi Experts,
I was contemplating on taking the SAP HR Certification and wanted to know if it is really useful. I also read a few threads in which people were rushing to take the certification right after their initial training. I personally believe that unless you have the relevant experience in using the system it would not really matter. Could you please give me an insight and also advise on what should be the correct roadmap and if any books would be helpful?
Thanks,
Swami

Hi,
1. What is the Certification for HR functional consultants?
Visit [SAP HR Certification Test|http://www12.sap.com/services/education/certification/certificationtest.epx?context=%5b%5bC_THR12_05%5d%5d%7c].
Visit [SAP Eduction|http://www12.sap.com/asia/services/education/schedule/schedule_IN.htm] under section Human Capital Management ECC 6.0.
2. How do I prepare for the Certification? What material do I need and where can I get it, books and eBooks etc?
You would attend the certification course if you are not an experienced consultant. If you are an experienced consultant and do not want to attend the certification, you will need your company to provide you required documents to submit to SAP.
You can find books at [SAP Press|http://www.sappress.com/].
3. Do we need some type of training?
You will have to attend training if you are not an experienced consultant.
Also, visit:
Re: Guidance.
Regards,
Srilatha.

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

Please let me about the SAP transaction code(s)

Please let me about the SAP transaction code(s) from which I will get monthly data of the folowing:
Material or product wise listing of raw materials used in WIP & converted to Finished goods remaining as closing stock

Dear parameswar
The simple work is go to MM60, give material type ROH (for raw material) and execute. You will get list of all raw materials. Make a note of it and now go to MB51, give those material codes and give movement type 261 for issue from stores and execute. You will get raw materialwise details of how much quantity has been issued to WIP. The same exercise you have to do for FERT.
thanks
G. Lakshmipathi

Please let me about the SAP transaction code(s) from which I will get month

Please let me about the SAP transaction code(s) from which I will get monthly
Material or product wise listing of cost of finished goods sold & lying as stock

Dear parameswar
Go to SE16, give the table MBEW and select the following fields:-
VERPR - If you want to see the moving average price of that particular material
STPRS - If you want to see the Standard price of that particular material
SALK3 - If you want to see the total valuated stock of that particular material
To see how much stock is available, run MMBE and execute. You can also check in MC.9 (mcdot9)
thanks
G. Lakshmipathi

Query About the SAP ABAP Module

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

Question about Associate SAP HR certification

Hii All,
I am thinking of taking Associate SAP HR certification. I actually took a training for 6 weeks. Is it possible to take the exam without work experience. Do i need work experience to take the certification. Is the certification worth taking to land a job?
I appreciate any reply.
Thanks

Hi vimal,
definetely you can take the certification, and it will help you to fetch a job but domain experieince will be added advantage
regards,
ram

Please guide about the steps of certification

hi dear
i m ameet and i m working in the oracle development track so would any of you gudie me proper wether i do certification of oracle 9i developer track or i can do certification of oracle developer 10G.
please tell me all papers code and guide properly how i can achieve the certiification means please experience person guide me about the way to prepare about ceritification.
my email address [email protected]

Hello,
You have provided your email address below. You should beware of unscrupulous people who will contact you trying to sell you braindumps and other illegal exam prep materials. It is your responsibility to be absolutely sure that the materials you use to prepare for your exam are valid and approved by Oracle and are NOT considered cheating. Cheating to obtain certification will quickly be found out by potential employers and if it is discovered by Oracle, we will remove your credential and ban you from taking exams for at least one year. You can determine if a company is legitimate or not by checking with CertGuard http://www.certguard.com/search.asp.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager

About the sap script .......

wat does this statment means? can any one explain each of the line .........................
POSITION YORIGIN '+.0' LN
BOX WIDTH '24.0' CH FRAME 10 TW
BOX XPOS '+24.0' CH WIDTH '24.0' CH FRAME 10 TW
BOX XPOS '+48.0' CH WIDTH '24.0' CH FRAME 10 TW

[Edit section] 3.2.3 Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
[Edit section] 3.2.3.1 BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position. Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame. Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below. Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
[Edit section] 3.2.3.2 POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
Reward if helpful.
rajyalakshmi

A question about the SAP Demo Example: OfficeControl in WebDynpro ABAP

Hello Experts,
I find some examples about WDA UI Element "OfficeControl" in packet SIOS. But some standard functions of Word are deactivated.
e.g in the following screenshots, MailMerge function is deactivated.
[screenshot|http://picasaweb.google.com/meerwu/DropBox?authkey=Gv1sRgCJy33JuwwsSVDQ#5390235805723698882]
Do you know, is it possible to activate all the word functions inside WebDynpro?
Many thanks!
meer
Edited by: Meer Wu on Oct 8, 2009 4:35 PM
Edited by: Meer Wu on Oct 8, 2009 4:36 PM

Any inputs?

How about the Internet DBO certification?

Hi, My friends:
I am preparing for Oracle 8i Database operator exam(#1ZO-411). After searching on the Amazon,I only found one book for this exam(The book I found is Jason Couchman's DBO certification exam guide-0072123613, published by Oracle in 2000). Unfortunatelly, This book actually is for Oracle 8 DBO test that has expired in March, 2002. I will appreciate if you can give me some advice on how to prepare this exam and which other books I need to prepare this exam since this single book seems not good enough. Thanks for your help!
Sincerely,
Jun Cai
05/29/2002

Hi, My friends:
I am preparing for Oracle 8i Database operator exam(#1ZO-411). After searching on the Amazon,I only found one book for this exam(The book I found is Jason Couchman's DBO certification exam guide-0072123613, published by Oracle in 2000). Unfortunatelly, This book actually is for Oracle 8 DBO test that has expired in March, 2002. I will appreciate if you can give me some advice on how to prepare this exam and which other books I need to prepare this exam since this single book seems not good enough. Thanks for your help!
Sincerely,
Jun Cai
05/29/2002

About the sap mails

if sales order or purchase order rises then automatically send sap mail to the customer or vendor. and tell me how to use the nace t-code.

for sending sap mail   ,
create    a z object of your sales order   or purchase order   , by copying the standard   program and include the logic of creating spool request for sending it as   mail . please use the below link for logic of   sending as mail.
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
then , place the z object   which you have created in the   NACE transcation , output types for   sales order or   Purchase order .
there will be an option in the   output types   as tabstrip as' mail'    , call   the   z program and give the layou also either z layout or original   layout as per Country specific .
reff : you can see the default program where it is called in general data , the program and formroutine are called    yo can   give the same in the mail   tab also .
Regards,
welcome your Queries
Regards ,
Girish

Is it the right time for me to get SAP SD Certification?

Greetings everyone!!!
For the past few days, I have been thinking alot about taking my career to a new step and get SAP SD certification.
But before venturing further into it, let me briefly explain about my Background.
I am a marketing Post Graduate and an MBA with an Experience of 10 months in the field of Sales and Business Development, in the Wellness Industry. (I have attached my curriculum vitae for you all to study and help me in selecting the right path)
As of now, I think of two possible ways of going about the SAP Certification. (Since I have more or less decided to do it anyway)
1. To get more experience in the domain and then get the certification
2. To get the certification right away
I should also declare this before hand that i have no hands on experience with any of the ERP software in practice today. But i do know little bit about Tally. And, if I have to get that before taking us SAP Certification, then that would mean searching for a new job and working in the new job for some time to get to know the basics.
Also, after visiting the SAP Academy in my city, they offered me two options -
a) ILT (Instructor Led Training)
b) E Learning
I wanted to know if there will be a vast difference between the learning outcome from these two, and which one should i prefer joining. Its just that, If i go for the ILT, I will have to quit my job, where as on the other hand, I can pursue the course without leaving the job, but within 200 Hrs of Campus E Learning.
Also, considering my background, is Sales and Distribution the correct module for me or should i consider doing any other course.
Apart from all the above, is there ANYTHING ELSE i am missing?
Kindly show me the light.
Thanks and Regards,
Vedansh

Hi Vwdansh,
generally SD modules are taken by MBA or related professionals because of having a domain knowledge in Sales and Distribution area, so your choice is good, however there are some more functional module exits in SAP which can be taken as an career option like CRM etc, for details about the major SAP functional module you can search on Google on in SCN.
When it comes to taking a training , you can opt for weekends classes as it is a suitable option for a working proffessional, the concern is that while having a online training , you may face some problem in which online suggestion will not provide you any fruitful meanings as your learnings, so a classroom training should be prefferable.
As you have working experiences so i will suggest you to take training from any authorised training center, ask the councellor that you wants weekends classes so that your present work will not get interrupted.
Finally, SD module is a right choice for you but once you should search some more major module that may suits you, because in SD there are so many people already working, but its not the case with CRM.
If you have any further query, please revert.

Confused about the Business Component Developer Certification

Excuse me, I´m confused...
How many certifications are about the Business Component Certification? Three??
I thought there was just one, the Business Component Developer, which is the 1Z0-860 code...
but I also have seen these:
Java EE 6 Enterprise JavaBeans Developer Certified Expert Exam - 1Z0-895
Java EE 6 Java Persistence API Developer Certified Expert Exam - 1Z0-898
and now I don´t know which one to study for...
Are these better? Or just different? Or are the last ones just the new ones and the 1Z0-860 is obsolete?
Thanks in advance!

938334 wrote:
Excuse me, I´m confused...
How many certifications are about the Business Component Certification? Three??
I thought there was just one, the Business Component Developer, which is the 1Z0-860 code...
but I also have seen these:
Java EE 6 Enterprise JavaBeans Developer Certified Expert Exam - 1Z0-895
Java EE 6 Java Persistence API Developer Certified Expert Exam - 1Z0-898
and now I don´t know which one to study for...
Are these better? Or just different? Or are the last ones just the new ones and the 1Z0-860 is obsolete?
Thanks in advance!The basic answer to look at the question topics for each exam and and see what fits you. The question topcis should yield insight.
Additionally the following exam is an OCP
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_860
The other two are OCE, as far as I can tell. Typically more of an area in depth, but OCE's can vary.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_895
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_898
I also notice the earlier exam is J2EE5; the later exams are J2EE6
Hope this helps a little, but this java stuff is too hard for me and i must stackdump.

About the SAP SD certification

Similar Messages

Maybe you are looking for