About the setMode method of Camera

Quoted from here:
Sets the camera capture mode to the native mode that best meets the  specified requirements. If the camera does not have a native mode that  matches all the parameters you pass, Flash Player selects a capture mode  that most closely synthesizes the requested  mode. This manipulation may involve cropping the image and dropping  frames.
Does it mean that the frames captured is not necessarily the same as required by setMode(width:int, height:int, fps:Number, favorArea:Boolean = true) ? The actual frame captured may be either wider/narrower,higher/lower in size and have higher/lower frequency than required ,is this true?

It's going to depend on the camera and whether it supports what you have set. Nowadays drivers are pretty good and support all kinds of sizes and framerates. The flash will do it's best to give you what you want, but it all matters on whether or not the driver for the cam will support it.
Graeme Bull
www.fmsguru.com

Similar Messages

  • A question about the getProperty method defined in the Security class

    Hello Everyone!
    I would like to ask a question about the getProperty method defined in the
    Security class.
    public static String getProperty(String key) Do you know how can I exract the list of all possible keys?.
    Thanks in advance,

    I found the answer, in fact the keys are defined in the java.security file.

  • About the tab "Method"  in definition of  activity

    In the tab "methods" in the definition of activity, what's meaning of Modal call and how to export paramaters and import parameters there.

    Try searching the SAP Help first for secondary methods in workflow. It is amazing how many answers are in there. And as an added bonus you also comply to the forum guidelines.
    Regards,
    Martin

  • About the setting method of  Instant Messaging(collabo4.01)

    Please teach me the setting method of Instant Messaging ID ( yahoo ).
    Although an icon is displayed, it will not be in an offline state.

    Hi,
    You can debug you JSPDynpage either from NWDS with the help of break points or by writing log statements in your code which will be written in defaultTrace log file.
    Check this to debug from NWDS:
    NetWeaver Portal Debugging
    Check this to write log statements:
    http://help.sap.com/saphelp_nw70/helpdata/EN/b0/003c41325fa831e10000000a1550b0/frameset.htm
    Netweaver Portal Log Configuration & Viewing (Part 3)
    Regards,
    Praveen Gudapati

  • About the read() method; it returns an integer

    when I us the read method (from the filereader class) to read from a file , it retyrns an ASCII representation of the character.
    However , I can't display character on the screen like that (numbers). so, how can I turn them back to characters, so I can show them properly?
    Another Question: How can I set the position of components inside a panel. I don't like the way the layoutmanager sets their location. I want to do it myself
    Thanx

    so I can show them properly?Cast to char: System.out.print((char) inputCharacter);
    I want to do it myselfSet the layout manager to null and position the components with setBounds or setPosition and setSize. Good luck making it look right when the fonts and font sizes change or the container is resized.

  • About the sort method of arrays

    Hi,
    I found that for primitive types such as int, float, etc., algorithm for sort is a tuned quicksort. However the algorithm for sorting an object array is a modified merge sort according to the java API. What is the purpose of using two different sorting strategy?
    Thanks.

    The language knows how to compare two ints, two doubles, etc. For Object arrays, however, it's not a simple matter of comparing two reference values as ints or longs. We're not comparing the references. We have to compare the objects, according to the class's compareTo() method (if it implements Comparable) or a provided Comparator. The size of an int is known, fixed, and small. The size of an object is unknown, variable, and essentially unbounded. I don't know for sure that that difference is what drove the different approaches, but it is a significant difference, and mergesort is better suited to use cases where we can't fit the entire array into memory at one time. It seems reasonable that we'd get better locality of reference (fewer cache misses, less need to page) with an array of ints than with an array of objects.
    Edited by: jverd on Mar 18, 2011 3:16 AM

  • Does anyone know about the update that just came out for the s3 a few days ago.

    does it fix all of the bugs that people like me were having with 4.3 like apps crashing, huge battery drain and phone lagging. I have not heard anything about it and I want to hear more about it before I start to download the update in case it completely messes up my phone. I hope it fixes my problems and does not give me anymore problems.

    It simply just allows roaming on the Canadian Telus network.  That's all folks,
    http://www.androidcentral.com/verizon-galaxy-s3-update-enable-roaming-canadas-telus

  • I need suggestion about the way , method, or path of learning GUI

    Since there are many IDEs that are capable of developing the Java GUI quickly, one of my friend suggest me to learn GUI using code instead of drag and drop GUI component. He said when your boss ask you to fix the error/bug for the front-end part of the program, which is written in code only.
    Another situation is that when you are working with a team and your team members using code instead of these drag&drop, he said i have to adapt to using these code to write the GUI.
    Actually he has point. what do you guys think? please post your opinion.

    roadorange wrote:
    Since there are many IDEs that are capable of developing the Java GUI quickly, one of my friend suggest me to learn GUI using code instead of drag and drop GUI component. You should go through the Swing tutorial and perhaps the 2D demo that comes with the JDK. Look at the code, run the examples, step through it or whatever you want. But I personally don't think you get much (except a massive, lasting headache) from writing the code by hand.
    He said when your boss ask you to fix the error/bug for the front-end part of the program, which is written in code only.Huh?
    Another situation is that when you are working with a team and your team members using code instead of these drag&drop, he said i have to adapt to using these code to write the GUI.I'm starting to lose you here...
    Actually he has point. what do you guys think? please post your opinion.I say use the GUI tools (don't fight evolution)

  • Questions about the ipod camera connector...

    Hi,
    i got some questions about the ipod camera connector.
    1)Is the camera connector compatible with the Sony camera DSC-P93A ?
    In fact, this camera got PTP protocol.
    PTP (Picture Transfer Protocol) Oui
    Marque PIM (Print Image Matching) Oui
    PictBridge™ Oui
    So, do the camera need to have the three following protocols to be compatible with the camera connector ?
    =>Mass Storage, PTP, and Type 4
    Or maybe does it need only one of it??
    2) Is it compatible with a USB memory card reader?
    Thank you

    Wel, if i've right understood what you said, my camera is compatible because it got PTP protocol ?
    That's weird, cause i wrote a mail to sony to ask them about the compatibility of my camera, but they answered that it wasn't. But of course, i'll prefer to believe you than them !

  • What are the preferred methods for backing up a cluster node bootdisk?

    Hi,
    I would like to use flarcreate to backup the bootdisks for each of the nodes in my cluster... but I cannot see this method mentioned in any cluster documentation...
    Has anybody used flash backups for cluster nodes before (and more importantly - successfully restored a cluster node from a flash image..?)
    Thanks very much,
    Trevor

    Hi, some backround on this - I need to patch some production cluster nodes, and obviously would like to backup the rootdisk of each node before doing this.
    What I really need is some advice about the best method to backup & patch my cluster node (with a recovery method also).
    The sun documentation for this says to use ufsdump, which i have used in the past - but will FLAR do the same job? - has anyone had experiance using FLAR to restore a cluster node?
    Or if someone has some other solutions for patching the nodes? - maybe offline my root mirror (SVM) - patch root disk - barring any major problems - online the mirror again??
    Cheers, Trevor

  • The problem about the signal of JNI

    Hello,
    When the system (it creates by the C language) created here is operated on Solaris and javaVM is operated using a JNI, the phenomenon which the core file outputs within the JIT compiler of java (libsunwjit.so) has occurred.
    Although it had generated twice until now, since it had collided with the signal which the signal has generated in one of the another threads, and it uses internally by JavaVM from the contents of a core file when it generated first, it had generated.
    However, although the core file was investigated when it generated at the 2nd times, there was no trace that another thread generated the signal.
    Is there any case where collide with the signal currently used by JavaVM, and also a signal is generated in a JIT compiler?
    What thing has an obstacle used as the factor which a JIT compiler makes have generated the signal in the past again?
    Please give me the reply to the above-mentioned question for a cause elucidation.
    As appending data, the contents which referred to the core file are described below.
    (gdb) thread 1
    [Switching to thread 1 (LWP    163        )]
    #0 0xfe359d88 in __sigprocmask () from /usr/lib/libthread.so.1
    #1 0xfe34eb34 in __sigredirect () from /usr/lib/libthread.so.1
    #2 0xfe351a10 in thrpkill_unlocked () from /usr/lib/libthread.so.1
    #3 0xfe239470 in abort () from /usr/lib/libc.so.1
    #4 0xfb49353c in panicHandler ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/classic/libjvm.so
    #5 0xfb798084 in intrDispatchMD ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/native_threads/libhpi.so
    #6 0xfe359348 in __libthread_segvhdlr () from /usr/lib/libthread.so.1
    #7 0xfe35bdf0 in __sighndlr () from /usr/lib/libthread.so.1
    #8 0xfe3586f8 in ?? () from /usr/lib/libthread.so.1
    #9 0xfb3bd8bc in JITPerformDynamicPatch ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/libsunwjit.so
    #10 0xfb3de848 in JITResolveConstPoolEntry ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/libsunwjit.so
    #11 0xb945908 in ?? ()
    #12 0xc5054e4 in ?? ()
    #13 0xe2974c in ?? ()
    #14 0x851b75c in ?? ()
    #15 0x7c3841c in ?? ()
    #16 0xb917560 in ?? ()
    #17 0x8a9b6d4 in ?? ()
    #18 0xb8e18e0 in ?? ()
    #19 0x71377d8 in ?? ()
    #20 0x7137784 in ?? ()
    #21 0x7d7d7f4 in ?? ()
    #22 0xc67c4b0 in ?? ()
    #23 0x913998c in ?? ()
    #24 0xb2bf58 in ?? ()
    #25 0xc51a854 in ?? ()
    #26 0x8794c7c in ?? ()
    #27 0xfb3de980 in JIT_INVOKER_MARKER ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/libsunwjit.so
    #28 0xfb494cec in notJavaInvocation ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/classic/libjvm.so
    #29 0xfb457674 in jni_Invoke ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/classic/libjvm.so
    #30 0xfb45930c in jni_CallVoidMethod ()
    from /opt/fujitsu/jasmine/JasEMedia/jre/lib/sparc/classic/libjvm.so
    #31 0xfbee0d7c in ChartJem_Generate ()
    from /opt/fujitsu/jasmine/EMImageChart/lib/GKM0JEMC.so
    #32 0xfb7630a4 in ?? ()
    from /opt/fujitsu/jasmine/data/default/methods/JasEMedia/lib043C.so.2.0
    #33 0xff2b106c in odb_OmsPcExec () from /opt/fujitsu/jasmine/lib/libjas.so
    Please contact me, if the core file is required. Separately, I will send.
    In that case, also about the transmission method, please unite and contact me.
    The system configuration is as follows.
    Operation System:SOLARIS(7)R00081
    Java version:1.2.2 Classic VM (build JDK-1.2.2-W, green threads, sunwjit)
    I'm hoping someone can help me out.
    Thanks!

    After that, a problem is not solved. Would you teach, if there is the method of something saying?

  • ByteBuffer: how come the abstract methods work?

    I am confused about the abstract methods in ByteBuffer class. Many of the methods in that class are declared abstract but yet I am able to use them without a problem.
    For example, put(byte b) is declared abstract in the java docs. But I am able to use that method ( I did not have to extend ByteBuffer and implement this method). I know I must be missing something here...any help would be appreciated.
    thanks

    Those responses should certainly do the trick. But I love hearing myself type, so here's an example:abstract class Fred
         public abstract void hiThere();
    class SubFred extends Fred
         public void hiThere() { println("Greetings Professor Falken"); }
    }Somewhere some method says it returns an object of type Fred. To do this they might (as far as you know) create an instance of SubFred and return that to you. SubFred is of type Fred. Your code doesn't know or care (usually) what the ACTUAL class is, as long as it matches what you expect Fred to be from the documentation.

  • Can anyone give me some tech info about the camera on my Pre?

    I'm about to set off on a long, lightweight trip and plan to use the Pre as my only camera on this trip.  I have a few questions about the pre camera which I can't seem to find answers to on the phone itself:
    1.  Is there any way to set the 'picture quality' on the camera - ie, low-res / hi-res - or do I just get what I'm given.
    2.  How 'big' is the filesize of each picture going to be - in other words, how many will I get before my 8Gb pre is 'full'
    3.  Is there any way to zoom with the camera?  I think not, but thought I'd ask...
    4.  To get the pictures off the phone, I plan to send them as attached files with text messages or email, back to base.  Then I could delete them from the pre, to create space. Will this method attach only low quality versions of each picture, or will the original-quality picture be sent?
    Thanks for being here.
    Jeff
    Post relates to: Pre p100ueu (O2)

    In answer to your questions,
    1. No, there is no way to change the resolution.
    2. It depends on the picture you take. I have not seen a spec. on the default file size. I suspect they will be in the KB range.
    3. No, no way to zoom.
    4. When you send the picture it should not change the resolution.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/emea/pre/p100eww/​o2/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

    I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • A few years ago I bought music from Itunes.  Recently I deactivated all computers in order to add a new computer.  Most of the music I purchased came through, but I am still missing about 30% of it.  How can I download all the music I have purchased from

    A few years ago I bought music from Itunes.  Recently I deactivated all computers in order to add a new computer.  Most of the music I purchased came through, but I am still missing about 30% of it.  How can I download all the music I have purchased from Itunes?

    Might have luck with that here >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store.
    Make sure and use the same Apple ID that was used for the original purchases.

Maybe you are looking for