About the shift sequence setup in capacity categary

Hi
Harish here
Can any body give me the technicality behind the planning, how shift sequence will consider.
For ex: i have created the wc and for that i have created the capacity as machine. in the capacity header i have entered the factory calendar and start time as 9.00 am and end time 5.30 pm and break as 1h. also i have created the group of shift sequence in that i have taken as general shift. that is only one sequence ( 9AM-5.30PM no break consider) that has been assigned to above category
How the system is selecting the sequence for the group (enter in capacity catagory) as well as calendar and arrives the dates of schedule.

...

Similar Messages

Shift sequence in available capacity

hi, all SAP experts,
my question is as follows
I created grouping in which shift sequences are defined and i assign this group to work center in capacity header. So work center should have to select shift sequence in capacity tab but i enter manually start time and finish time in capacity header.So why systm can't show interval of available capacity daywise automatically through grouping or is there any setting for this?
thanks in advance
i will look for points also
regards
Nitin Nerkar

Dear,
In work center change transaction capacity view
assign this grouping no XX.
Enter active version = 1
Then Click on interval and shift push button (left top)
follow the menu path Edit>insert>insert interval
enter
valid from and valid from field
enter shift sequence and remove the data if there in any other filed and click on ENTER. all the days in week are defaulted with the shift seq you defined.
It will work for you.
Regards,
R.Brahmankar

Every time my curser rolls over a picture on a webpage I get a little pop up telling me about the shift+r function,can I this off?

This is really irritating as it pops up on any picture and I have to move the cursor before it goes.

Looks that your ISP is sending pages compressed and images in a lower quality to speed up the page loading and adds a script to each page to enable viewing the images in their original quality.
You will have to check the connection settings via your ISP's website to see if you can disable that feature.

Shift sequence in CO11N ?

Dear guru ,
in the confirmation of the operation of a production order (CO11N) i want to enter the shift sequence
for the work centre capacity involved.
Itu2019s this field available in this transaction ?
Thanks a lot.

Dear,
Shiftwise confirmation is now part of SAP standard! The new functionality is now part of ECC6.00 Enhancement Package 3, see help.sap.com for further information and assistence,
http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/f2a5ce3cd767f9e10000000a1553f7/frameset.htm
Use Release Ecc6.00 with enhancement 3
Otherwise you need to go for Z development.
Regards,
R.Brahmankar

Shift sequences

Hi team,
plz can anyone tel me how to define the shift sequence in detail,i have been through this path but the sequence key its not taking ,on what basis it should be given
SAP Reference IMG u2013 Production Planning for Process Industries u2013 Master Data u2013 Resource u2013 Capacity Requirement Planning u2013 Available Capacity u2013 Define Shift Sequence

Dear Pravin,
Step wise try to do like this newly,(T.code = OP4A)
1) Groping:- Define new group say -95 ok with name TEST.
2)Then Click on Work break schedules:- New entry-
0001 0 BK1 12:00:00 12:30:00        0,50
0002 0 BK2 18:00:00 18:30:00        0,50
0003 0 BK3 03:00:00 03:15:00        0,25
3)Define Shift definitions like as,
A First Shift 01.01.0001 31.12.9999 07:00:00 15:00:00 7,50 0001
B 2nd Shift 01.01.0001 31.12.9999 15:00:00 23:00:00 7,50 0002
C 3rd Shift 01.01.0001 31.12.9999 23:00:00 07:00:00 7,75 0003.
4) Define Shift sequences
SH1 1   Frist Shift       A A A A A A A
SH2 2   Second shift   B B B B B B B
SH3 3   Third Shift       C C C C C C C
Then Assign it to your work center.
Regards
R.Brahmankar

Shift sequence of a workcenter changed AFRU not updated

hi all,
i have an issue with the change in work center's capacity.
by changing the shift sequence of a work center and then booking the hours against it, i can not get any update in AFRU in neither of its field ISM01, ISM02 ISM03....
what could be the reason? or am i missing anything? do i need to do anything more after changing the capacity related parameters?????
waiting for your master comments, valuable inputs?
best regards,
Maulin

hello Thaila,
first of all thanks for yout reply,
in fact we have a schenario where we book the hours with event type B10 and B40. without any yeild confirmation.
and we consider the duration between the B10 and B40 as activity duration (in terms of hours).
so when i change the shift timings in the work center and post the hours in B10 and B40, there is a miss match. e.g. B10 i posted at 17.06.2009 10:30:00 and
B40 i posted at 17.06.2009 16:30:00 so in ISM01 or in ISM02 (based on activity and std values maintained) it should updated as 6 hours....
so it may possible that after changing the shift i am missing some other procedure.....
i hope this would have clear the question you had...
best regards,
Maulin

Opening an application while pressing the shift key

Recently, Microsoft Word 2011 failed to open and showed the message, "Microsoft Word has encountered a problem and needs to close." I followed troubleshooting instructions on the Microsoft website. Nothing cured the problem, but creating a new user account did enable Word 2011 to open normally. That seemed to imply that "a corrupt user account" was causing the problem. I could not find any instructions about how to repair that, but at some point I came across the suggestion to "hold the shift key down and click on the Word icon in the dock." I did this and Word opened normally in my account. After this, Word opened normally without holding down the shift key. Apparently this fixed the problem.
My question is, what does pressing the shift key do while you open an application? What's different? Why did it work? What's special about the shift key in this situation?
Thanks.

It may be something specific to Word/Office. Individual applications may accept different launch arguments passed to them via key combinations, such as holding the Option key when launching iTunes to invoke the option for choosing the library to use.

Why does Premiere render the same sequence sometimes fast and sometimes really slow?

I use Premiere Pro CC 2014.
I have a Nvidia GTX 590
Intel Core i7 X990 @ 3.47GHz
24GB RAM
Windows 7 (64)
200GB free space on an SSD drive and 2 more drives with each 1TB free.
I'm having trouble with performance when rendering sequences.
The sequences themselves are pretty simple. They contain MOV files from my Canon EOS 5D Mark III and transparent PNG files as overlays for titles and additional graphics.
I also use lumetri looks and have turned on Cuda rendering. As a codec for exporting I use H264 (fullhd, 25fps, 20mbits, 2pass, max render quality, max depth)
Whether or not I export in Premiere or via AME doesn't matter, the problem stays the same.
Now, when I start exporting, at one point, which is seemingly random (sometimes at 35%, sometimes at 60%, sometimes at 2% - I'm talking about the same sequence!) rendering becomes really really slow (~1 hour for a 3min video), and I don't understand why. I keeps slow until the whole sequence is finished. But before that, rendering was fast!
But sometimes, I'm lucky, and - after restarting my computer and Premiere, the same sequences render in whole, in under 2 minutes!
So obviously my computer is able to render fast. But it does not always do that. Sometimes - even after a fresh reboot, I'm out of luck and the same sequence renders in an hour - but only after a random point in the sequence.
It's as if Premiere stumbles and can't get up again. The only thing that CAN help (though does not alway), is rebooting the system and hoping for the best.
Where does this strange behaviour come from? I use ordinary footage, ordinary filters and an ordinary export codec. I have lots of RAM and lots of disk space
I have not found a topic in this forum with a similar problem

Similar problem here but on a Mac. AME is always much slower than directly exporting from Premiere, but if I start to get slow renders a reboot always sorts the issue out.

On Premise Exchange to O365, What is the migration sequence?

I am about to migrate from an On-Premise exchange to O365.
DirSync - What sequence are the objects and attributes synchronized? Hierarchically?, AD Schema?
Exchange Sync - What sequence are the mail objects synchronized? inbox, calendar, notes etc or using another flow process?

Hi,
I didn't find any information about the sync sequence when migrate to office365. However, I think the following article may give you some help:
Directory synchronization roadmap
Active Directory synchronization should be considered a long-term commitment to coexistence scenarios between your on-premises Active Directory and cloud. After you have activated directory synchronization, you can only edit synchronized objects in
your on-premises environment.
Synchronizing your directory with Office 365
This blog post provides the basic information you need to successfully implement DirSync. It also points you to more detailed information, for cases not addressed here. Specifically, it covers what you should review before you synchronize your directory
with Azure Active Directory. Office 365 uses Azure Active Directory for storing all user accounts, for all directory lookup, and for doing user sign-in authentication.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Hi all,
Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

Hi
If you are running three shifts ,please maintain the data as given belwo
start :00:00:00
End:23:59:59
Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
No.of individual capacity :1
System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
Hope this helps
regards
Prakash

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.
This has worked fine with MobileMe with only a couple of minor glitches in the past.
Any experience doing this the "right" way?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Question about the sequence structure

Hi,
If we want to get best performance when programming a sequence of functions or calculations, we should choose 'Stacked sequence structure' or 'Flat sequence structure'? or they have the same performance?
Thanks.

To the best of my knowlege there is no performance hit, the "Flat sequence structure" was a fairly recent addition to try and overcome one (of many) complaints about sequence structures in general, that stacked sequences obscure what is happening in the code. If the various sections of your calculation or functions have data dependency, i.e. the output of a calculation is fed into the subsequent calculation or function, then a sequence structure is probably not needed as, with data flow, the calculation that is "dependent" won't executed until all its inputs requirements are satified. If the "functions" are in the form of sub-vi's the method that is more "proper" is to inforce a dependency between subsequent vi's. This can be as simple as adding error in and out controls to the sub-vi's, even if they are only passed through the vi without actually performing an error function. This allows you to wire them together in the execution order that is required. Doing this on some of the early "built-in" functions that have remained in LabVIEW (the original timer functions) sometime requires putting a wrapper around them to make them sub-vi's with error passing, but in the latest versions of LabVIEW the compiler seems to do a good job of minimizing any performance hits this might appear to cause.
Putnam Monroe
LabVIEW Evangelist since 1992
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How do I know about the whole tables, sequences, triggers of the specific D

Hello,
I can check the whole tables of the db users with select * from tab; BUT can I know the whole META DATA of tables, sequences, triggers, procedures of a specific user?
Best regards

Raakh wrote:
Hello,
I can check the whole tables of the db users with select * from tab; BUT can I know the whole META DATA of tables, sequences, triggers, procedures of a specific user?
Oracle doesn't expose the metadata just like that but shows it in the various columns of various views based on the object type, for example like for tables, it would be in the user_tables and so on. If you are interested in knowing about the metadata of a specific object, you should use dbms_metadata package.
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e16760/d_metada.htm#ARPLS641
HTH
Aman....

About the shift sequence setup in capacity categary

Similar Messages

Maybe you are looking for