About the STM tool~

Dear Sir:
I sent a question to SAP as follow~:
I download the SAP Tools for MS SQL Server STM but can't start.
I restore the MS SQL 2005 DB from R/3 4.7 x110 32 bit windows source
system to R/3 4.7 x110 64 bit target system.
And I followed the 683447 note and 551915 note and 151603 note tried to
migrate DB from source DB to target DB.
but I can't start the STM it just stop and tell me to contact to the
support team.
Please tell me what's wrong.
my OS is Windows 2003 64 bit NT R2 64bit.
MSSQL 2005
R/3 4.7 x110
and SAP reply~:
Dear customer,
Please set up the WTS connection according to the attached SAP note
"605795". And to open the service connection, please refer to the
documents available at the following URL.
http://service.sap.com/access-support -> 'Connect to SAP'
-> 'Documentation'.
Best regards,
Nay
SAP Network Support
Actually I don't know how to set up WTS connection & what's the essential for doing it.
I only wanna solve my problem about STM tool and finish DB migration.
Can anyone give me a suggestion?
Or any knows how to solve my problem?
Regards
Jack lee

Dear Sir:
I followed the note 605795 and added a new MIS in System Data,but I can't set up the windows terminal server.
Here is my saprouttab,is anything wrong with that?
What should I do next?
P/S/D source dest dest-serv passwd
SNC connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.1 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.2 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.3 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.6 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.12 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.13 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.13 3389
SNC-connection from SAP to local R/3-System for pcAnywhere
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapwas 5631
SNC-connection from SAP to local R/3-System for SAPtelnet
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapwas 23
SNC-connection from SAP to local R/3-System for Netmeeting
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapwas 1503
Access from your local Network to SAPNet - R/3 Frontend
#P 192.6.* 194.39.131.34 *
P * * *
All other connections will be denied
#D * * *

Similar Messages

I want to know more about the Sanapshot tool. What is its purpose? how do I use it?

I want to know more about the Sanapshot tool. What is its purpose? how do I use it? I have searched Firefox Help, but did not find a clear answer.

That is not part of Firefox. It is either an add-on for Firefox which you installed, or it is a separate program you have.
Also, is '''Sanapshot tool''' the correct name? Or did you mean '''''Snapshot'''''?

Suggestions about the best tool for quality check for an ADF application

Hi All,
I need a few suggestions about the best tool for quality check in our ADF applicaiton.
ours is a small size WebCenter Portal application which neither uses any task flows nor consumes any portlets.
It has many jspx pages that use ADF components like table etc, consume web services using web service clients, and has some java classes.
We have come across below option to implement the code quality tools.
1. Jdeveloper inbuilt Staus option in View tab
2. PMD extension for Jdeveloper
3. Red Samurai
Few more suggestions or best practices would be really helpful.
Thanks,
Usha

Some general ADF / Webcenter coding standards -
http://umeshagarwal24.blogspot.com/2012/06/adf-coding-standards-check-points.html
You can use JAudit as well as mentioned in the blog.

A little question about the pencil tool

I have just a tiny guestion about the pencil tool in illustrator.
When i want to draw like it is a real pencil and make a lot of lines with it, then everytime when i'm drawing lines are disappearing because i'm drawing it again.
Maybe thats because i'm drawing over the other lines...but is there a simple way to make new lines all the time, so i can draw a bunch of lines over each other and agross etc.
hope you understand my crappy english.
with love,
Linda

Double click the pencil tool icon and check the options. You won't want to "edit selected paths"

Strange observation about the straighten tool

I found, that after making adjustments with the straighten tool, other's like exposure or saturation, that usually are quite fast become very sluggish. Disabling the straighten adjustment temporarily makes the other adjustments sliders react fast again.
Now the strange part:
Sometimes making an additional adjustment makes the before sluggish sliders react fast again WITHOUT deactivating the straighten adjustment before.
Example:
making a straighten adjustment -> exposure slider is now very sluggish
now making an additional shadows adjustment -> exposure slider is no more sluggish
So even Aperture now has to do more calculations the GUI is faster. Weird!
I found, that the problem with the straighten tool occurs more often, if it is the first adjustment you apply.
I didn't find a way to make the behavior 100% reproducible. It is somewhat random.
Would be nice, if someone else could investigate into this issue as well.
I suspect, Aperture somewhat mixes up the order in which it applies the adjustments. When the other sliders show the sluggish behavior, Aperture probably recalculates the straightening adjustment from the RAW for each screen refresh, while it uses an already straightened cache file, when the sliders work fast.
If Aperture has an issue with the optimal processing order with other adjustments as well, this may be an explanation for the hugh differences in GUI performance experience, that are reported here for nearly identical hardware.
Peter
Quad G5, GT 7800 Mac OS X (10.4.8)

David,
it is not just the Shadows/Highlights.
I extended my test a bit. Below you find a list. All effects with a + increase the speed:
Red Eye Correction -
Spot & Patch -
Levels +
Highlights & Shadows +
White Balance -
Color +
Monochrome Mixer -
Color Monochrome -
Sepia Tone -
Noise Reduction +
Sharpen +
Edge Sharpen +
During that test with enabling/disabling each adjustment, it happened occasionally, that after enabling/disabling an additional adjustment, the Brightness slider kept the speed gain (with only Straighten enabled). Disabling and re-enabling Straighten brought back the sluggish behavior.
Your Viewer window must have a minimum size to show the effect . If the actually displayed picture size is below approx. 720x540 px for 4:3 or 724x480 px for 3:2 pictures, enabling the Straighten tool doesn't slow down the Brightness slider (and other adjustments) noticeable and thus there is not speed gain by enabling other adjustments.
I suspect it has something to do with the amount of memory in the graphic card. I disconnected my second monitor to see, whether the cutoff now shifts towards a larger Viewer area (assumed memory for second display would now be available to Aperture). Result: No it didn't change. So there might be an limitation within core image, that is independent from the graphic card memory.
Nevertheless it would be interesting, if others could check, what's the maximum Viewer size they can use, before the speed penalty dials in, when enabling the Straighten tool. I'm especially interested in reports from people with an 128 MB and 512 MB graphic card (mine is 256 MB).
To do this test, choose Basic view (Viewer at top, Browser at bottom), maximize the Browser area by dragging the window separator towards the bottom, rotate a RAW file with the Straighten tool and then drag the Brightness slider. It should move very sluggish (if not you're a lucky guy). Now diminish the Viewer area, until the Brightness slider moves smoothly. Play around with the size of the Viewer window, until you get the exact size, where the behavior changes. Now make a snapshot (cmd-shift 4) of the displayed picture (actual picture area, not whole viewer window), and check for picture dimensions with Get Info. Post your results here.
The above observations make me to over-think my current dual monitor workflow. Instead of using both displays with Aperture, with Projects, Browser and Adjustments on my 24" LCD and the pictures displayed on my carefully profiled high-end CRT, it might be a faster workflow, to drag over the whole Aperture window to the CRT, make sure the Viewer window is not wider than 720 px and do my adjustments there. A bit annoying to have a setup similar to that in these cool, stylish Aperture ads from Apple, but have to work on a single monitor with a tiny Browser window to get acceptable speed when adjusting my pictures.
The fact that an additional adjustment can speed up things, when using a larger Browser window or full-screen mode, shows, there is still something to improve with Aperture's performance. I hope Apple will investigate into this issue.
Btw.: Does anybody know, how I can make Apple aware of my findings? Or do they know already, because they monitor this list?
Peter

True or False about the pen tool in Photoshop?

Since Photoshop is mostly a raster image program,
and the Pen Tool is better for vector drawing in vector programs,
the Pen Tool is virtually useless in Photoshop, even if you want to
outline and mask something.
I always thought it was easier to use the paintbrush.
The pen tool in Photoshop is just silly.

Buko:
Don't be silly. I use the pen tool all the time (for cutouts, as a tool, text on path, you name it). Read post 17 -- 75 hours a week for four months cutting paths. Only cutting paths. A client that wanted the path between the dark and light pixels in the USM halo. The psychological damage is probably starting to surface now.
I understand how paths can be useful. I also wonder if their usefulness might have run its course. The reason I used paths 10 year ago was that I **had** to use paths. Don't you use them less for your mag now than you used to? Aren't you a big proponent of PSD outlines? In my workflow I find less and less of a need for them. But I make Medicaid brochures. It would be great to hear from some folks who use vector masks and need them for x reason.
I'm having trouble visualizing x.
J

(CS4) Question about the gradient tool

There was a time when the default behavior for the gradient tool was "foreground to transparent"
Then, at some point, the default behavior became "repeat last gradient" - even if the last gradient was an FX applied to a layer.
I find the latter annoying as hell, and slowing me down considerably, in that I have to click on the gradient and manually select "foreground to transparent" every time I need to use it.
Is there any way to change this default behavior?
Thanks!

Nope. I filed a bug report on this way back then, but apparently it was not important enough to be changed back in a patch update.
Mylenium

Three questions about the developer tools

At my company we have evaluated this very handy tool, and we have only three questions...
* Will the autocomplete feature be more intelligent. For example pl/sql developer recognize partially written table names and suggest a full name.
* How to debug and step through the procedures?? This is a MUST!!!!
* Is it possible to add source control integration (source safe) for the packages/procedures?
With these features, it will be super!!
/henrik

When I was at the VSLive in San Francisco back in February, I spent some time at the Oracle booth and I asked for Source Control also.
I was told to my happy suprise that lots of other developers had been asking for that also but I was shocked when the Oracle reps told me that they didn't understand why people would want this feature or how they would use it. They tried to convince me that "Generate Create Script" was what I wanted.
Btw, "Generate Create Script" ticks me off. It always sticks the package owner in the create script and when I check it back in VSS I have to go in and edit it back out!!!
It seems to me that the mindset behind many Oracle tools is to work "on the database". I will admit that I don't use many Oracle tools. I used Procedure builder a few times but thats about it. To me it seemed pretty clunky, but it was nice to be able to debug a stored procedure. Or it was until you crashed the SP and it became locked in the database and un-updatable without a bounce ;)
Most developers that I know, prefer to work "on their hard-drives" and publish to the database or some variation on that.
I would love to see a tool for editing SPs and Packages where I could check out my code, make a change, compile it on the DB, and check my changes back into the source control. One more catch, we use VSS's ability to update the version number in a source code file on check-in so the version that ends up in the DB should have the "new" version number in the comment header.
Also, the "Auto Code Generation" tool is not geared towards the type of code I write. I thought we were supposed to get away from writing data access code in our forms? Yet, this tool throws all kinds of stuff in for doing just that and no tools to make it easier (that I could find) to create a data acces layer for wrapping my stored procedures and packages. Where are these tools, Oracle? Help us write better code, not worse.
The autocomplete is nice, but I have trouble with it. For example, if I type a table name and "." it will bring up all the columns in the table. If I type "R" it scrolls to the first column that starts with "R". But if I type "S" next, instead of scrolling to the first column that starts with "RS" it spits out the currently selected column and sticks an "S" on the end. Other times it doesn't work at all.
The "Query" window is next to useless. It should work more like a SQL Plus (DOS) window. Or at the very least more like a SQL Server Query Analyzer Query window. I'll keep my SQL Plus until this is way better.
Hopefully the next version (or 2 or 3) will be better. I hope Oracle is listening. They did acknowledge that other developers were asking for some of the same improvements.

How can I get the ruler tool to show length in inches?

This doc says the units the ruler tool shows length in are changed using preferences:
http://helpx.adobe.com/en/photoshop/using/positioning-ruler-tool.html
This document says the ruler tool always uses pixels unless you change measurement scale on a per image basis:
http://livedocs.adobe.com/en_US/Photoshop//10.0/help.html?content=WS3D3EF585-502B-49d2-85F F-537E9DC25C21.html
So far, the latter seems to be the case, but that's horribly inconvenient. Is there something I'm doing wrong or is there some setting somewhere that will make the ruler tool display measurement length in inches (or what ever I set in preferences)?
Note that I am not talking about the units shown at the top and left side when the ruler is in view, I'm talking about the ruler tool's position and length data, whether or not the ruler is in view.

Trevor,
Unfortunately, that only changes the ruler units, not the mouse coordinates displayed when taking measurements using the ruler tool.
gener7 nailed it though.
rgr

I can't use the cut tool above the primary timeline...

I can't use the cut tool above the primary timeline...
it only works on the primary timeline. why and what can I do?
thanks

Are you talking about the blade tool? You can use that on any clip, regardless of where it is. If you talking about using the keyboard shortcut, then the connected clip has to be selected. It doesn't have to be a storyline.

Elements 8...where is the lasso tool option??? not showing in toolbox

I am working on a project and have read about the lasso tool but the icon option for it cannot be found in my toolbox selections. what has to be done to include that option in my toolbox???????????

The lasso tools are nested. Right click where indicated on the print screen:
http://www.pixentral.com/show.php?picture=1DOvCXWzPSsgHQMcURvrdNdJiCTjo
That should open it up for you.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

Hello, my name is Todd, I recently dowloaded PS CC 2014. I have used PS for decades. The crop tool will show the progress bar, then at about 25% it will totally stop. What can I do? Thanks

Hello, my name is Todd, I recently dowloaded PS CC 2014. I have used PS for decades. The crop tool will show the progress bar, then at about 25% it will totally stop, even on VERY small 72dpi images. What can I do? Thanks!

Double check all the settings in the crop tool, and make sure you aren't telling it to create a HUGE image as a result of your settings.

When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the resulting segment. What causes this?

When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the bounce. What causes this?

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Where can I find information about using the measurement tool and log?

Am try to use the measurement tool to measure perspective plain; any ideas?

No one can remotely have "any ideas" to help you when you don't even mention what your problem is nor what your system and workflow are like.
Of course, when you post here,one assumes you have done your due diligence, read the documentation, the user guide, the Help files in the Photoshop Help menu, as well as done Google and forum searches, etc, and we would expect some sensible, detailed information from you.
Teaching someone Photoshop from scratch, step by step, exceeds the scope of this forum—or any other forum.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

About the STM tool~

Similar Messages

Maybe you are looking for