About the subform sets samples.
I was going through the samples, and I noticed that I couldn't find the source of the data in the samples. The files used are DataA.xml and DataB.xml, however, there is no Data Connection defined anywhere, or at least I can't find it. However, if I delete the xml files, an error shows, so it's obviously using them, somehow.
Also there is no info in the Data View tab, and when I create a new Data Connection, there is always something there.
Thanks!.
Yeah, I could find after some research where the data was coming from, thanks anyway.
In a related issue I'm having, if you have any idea why would this be happening, I'd greatly appreciate it!.
I work with a colleague that is the one in charge of assembling the final pdf documents, when I give him the xdp and the xml file, it works ok if he opens it in Designer, however, in the Adobe Livecycle process, the data is not recognized, and the document renders as if there is no data present.
I wonder, could this happen because the preview data feature is reserved for tests only?, and I would need to pass the data in another way?.
Thanks!.
Similar Messages
-
I get an error about the registry settig when I try and launch Tunes. Also when I try to burn a playlist, it says "no recorder found"
This may help:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Also try the driver section of:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Help!!! The problem about the layout set
I have created my own layoutset for the navigation and set it.Here is the question, I navigate from the iview for which i have created the layout set to a new page.there is a return link on the new iview,i click the link of return the Browser go back to the frist iview but the layoutset i have set is gone. When return from the iview how can i keep the layoutset .
Any one know the answer please tell me , thxHi Mike,
Thank you very much for your help. I think itis better to choose another kind of smart sensor with rs232 I/O port. It is easier to connect the eight sensors to the eight bluetooth servers. The eight sensors are fixed on the different bearing surfaces and rotate with the machine, it's difficult to use one turning adapter to connect them. So I have to use eight bluetooth servers to connect to the eight sensors.
The key problem ishould I use 8 bluetooth servers or 1 bluetooth server or the bluetooth vi of labview to receive the data from the other servers and how can I drive them. Just like question 3 and 4 following:
(3 key question) I skimmed through the forum and noticed labview can support bluetooth. But I want to know that: If the bluetooth function of labview 8 can receive the data from the eight bluetooth servers on the machine in the same time, how could I do? If not,
should I use the same kinds of eight bluetooth servers to receive the realtime data in the same time, which are connected to pc I/O ports(if they are enough), or just use only one server connected to pc to receive the data from the servers in the same time ?
(4 question) I noticed that the bluetooth servers should use drive software or programe. If necessary, how could I do for the eight servers on the machine and on the pc? -
About the Font Setting in Swing (Multi-Font) !!!
HI:
I want to set a new Font to JButton or JTextField....
usually, we can invoke the method of setFont(..), but I want to set different Language with different font in one Component (e.g: JButton).
For example:
English ---> Tahoma, 11
French ---> Times new roman, 14
Chinese ---> SimSun, 12
HOW TO SOLVE IT!!!What's wrong with setFont(Font) again?
If you need a different font by locale, you just have to make sure you read the font name out of the resources instead of hard-coding it. If you need a different font for one button, setFont(Font) will work just fine by itself. -
Help !! About the PostProcessing SPI Sample
i was deployed the sample.
but i don't know whether it completed.Hi,
from UIViewController Class Reference:
+- (void)loadView+
+%< (SNIP) >% -+
+The default implementation of this method looks for valid nib information and uses that information to load the associated nib file. If no nib information is specified, the default implementation creates a plain UIView object and makes it the main view.+
+If you override this method in order to create your views manually, you should do so and assign the root view of your hierarchy to the view property. (The views you create should be unique instances and should not be shared with any other view controller object.) Your custom implementation of this method should not call super.+
+If you want to perform any additional initialization of your views, do so in the viewDidLoad method. In iOS 3.0 and later, you should also override the viewDidUnload method to release any references to the view or its contents.+
So if you want to create a view (background image) which loads from a nib you need to add additional views (scrollview) in viewDidLoad by adding the as subviews to self.view.
- (void)viewDidLoad
// Step 1: make the outer paging scroll view
CGRect pagingScrollViewFrame = [self frameForPagingScrollView];
pagingScrollView = [[UIScrollView alloc] initWithFrame:pagingScrollViewFrame];
pagingScrollView.pagingEnabled = YES;
//pagingScrollView.backgroundColor = [UIColor blackColor];
pagingScrollView.showsVerticalScrollIndicator = NO;
pagingScrollView.showsHorizontalScrollIndicator = NO;
pagingScrollView.contentSize = CGSizeMake(pagingScrollViewFrame.size.width * [self imageCount],
pagingScrollViewFrame.size.height);
pagingScrollView.delegate = self;
[self.view addSubView:pagingScrollView];
// Step 2: prepare to tile content
recycledPages = [[NSMutableSet alloc] init];
visiblePages = [[NSMutableSet alloc] init];
[self tilePages];
Dirk -
HT201363 I cannot get the e-mail about the re-set questions and the password.
!!!!!!
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102564) -
Adobe Interactive Form - SubForm Set
Hi Helper
Could someone please tell me what a 'Sub-form Set' is and What it is used for - ThanksHi,
A subform set is a grouping of two or more repeating or multipage subforms. You can use the subform set to control the order in which Adobe document services renders the subforms within the set, based on the order that the subforms appear within the set.
The subform set has two options for rendering the subforms within the set:
Use All Subforms in Order: All subforms appear in the output and the order is same as the order in Subform set.
Select one subform from alternative:
one subform appears in the final output, you can define the codition in Edit alternative button, that enables once you select this option from the Object tab.
Hope this helps you,
Amit -
Choice Subform Set Data Binding
We would like to use the choice subform set to display different subforms based on whether a hasScore value is set to YES or NO. This will be done repeatedly in the form so we want to try and map all the choice subform sets that use the hasScore value to the same data instance in our XML. When I attempt do this only the first choice subform set works. The rest default to the first subform in the choice subform set. The only way I get the rest of the choice subform sets to work is to duplicate the data instance in our XML to match the number of choice subform sets in the form.
Any way to get all the choice subform sets to use the same data instance in the XML? Or is there a better way to do this without resorting to javascript to show/hide the subforms? The choice subform set looks nice but we don't want to duplicate the XML data to get it to work.
What I have to do when I have 3 choice subform sets that use the hasScore value:
<?xml version="1.0" encoding="UTF-8"?>
<
loan_info>
<score>
<hasScore>YES</hasScore>
</score>
<score>
<hasScore>YES</hasScore>
</score>
<score>
<hasScore>YES</hasScore>
</score>
<scoreValue>742</scoreValue></
loan_info>
What I would like to when I have 3 choice subform sets that use the hasScore value:
<?xml version="1.0" encoding="UTF-8"?>
<
loan_info>
<score>
<hasScore>YES</hasScore>
</score>
<scoreValue>742</scoreValue></
loan_info>Paul,
I couldn't figure out how to reference the dataset value using the subform set. Not real easy to figure out with the UI for the subform set. Would prefer to just be able to put the JavaScript in the subform set selection code without having to do the dataset selection first. Makes some pretty strange looking data bindings for the subforms that are part of the subform set. Probably could use some more documentation on how to set these bindings up in the Designer help.
We ended up going with a top level ready:form script that could check the credit score Y/N value:
loan_info::ready:form - (JavaScript, both)
if (xfa.datasets.data.loan_info.form_extensions.forminator.hasCreditScore.value == "Y")
loan_info.Page1.Score.presence = "visible";
loan_info.Page1.NoScore.presence = "hidden";
xfa.resolveNode("loan_info.Page1.#subform[3].Score[1]").presence = "visible";
xfa.resolveNode("loan_info.Page1.#subform[3].NoScore[1]").presence = "hidden";
xfa.resolveNode("loan_info.Page1.Score[2]").presence = "visible";
xfa.resolveNode("loan_info.Page1.NoScore[2]").presence = "hidden";
else
loan_info.Page1.Score.presence = "hidden";
loan_info.Page1.NoScore.presence = "visible";
xfa.resolveNode("loan_info.Page1.#subform[3].Score[1]").presence = "hidden";
xfa.resolveNode("loan_info.Page1.#subform[3].NoScore[1]").presence = "visible";
xfa.resolveNode("loan_info.Page1.Score[2]").presence = "hidden";
xfa.resolveNode("loan_info.Page1.NoScore[2]").presence = "visible";
Too bad we couldn't use the subform set. I liked seeing them in the hierarchy - makes ir pretty easy to see what's going on vs. JavaScript buried in the top level ready:form event.
We also had a case where we would have needed to turn on two of the three subforms in the subform set. Might want to consider multiple selection for the subform set in future versions.
Thanks,
Steve -
Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.
A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting.
(10.4.10)
Use Software Update to update your OS to last version of Tiger. Install all the other updates that goes along w/it. -
I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
So confused about the size.... how exactly should i set them?
i've written codes like:
JFrame fr = new JFrame ("FR");
JTabbedPane tp = new JTabbedPane();
JPanel pa = new JPanel();
JTextArea ta = new JTextArea;
fr.add(tp.add(pa.add(ta)));
Questions:
1. How do I set the SIZE (dimension) of the GUI (the whole thing)
2. How do I set the size of the TextArea
I was thinking:
setSize = set the default size of a panel/compent
setMaximumSize = set the maxium area of that panel/compent (that'll allow you to drag to )
setMinimumSzie = set the smallest window/pan/comp that you can drag to
i tried fr.setSize or whatever... nothing just work.....!!
Sorry... im really a beginner and i don't know where can I have a good read about all these Java.awt objects... JPanel/Frame/tabbedPanel/TextArea/button/watever.... sooo many and so easy to be confused....
sorry i about the poor english... hope someone can help me out....
thanks!Some helpful resources in the tutorial:
Trail: Creating a GUI with JFC/Swing
1 - Lesson: Using Swing Components
a) - A Visual Index to the Swing Components
b) - Using Top-Level Containers
2 - Lesson: Laying Out Components Within a Container
For the JFrame or other top-level container we use the "setSize" method.
For JTextArea the api recommends we set the rows and columns to provide size information for the parent layout manager. For example - "new JTextArea(6, 18)"
Some layout managers, such as FlowLayout and GridBagLayout will use the preferredSize for sizing components so you can use the "setPreferredSize" method (in Swing and in j2se 1.5+ AWT). -
My wife's 4s needed to update the software. when it was updated/downlaoded the Wi-Fi would not work. It is currently grayed out and under General, About: the Wi-Fi is N/A. Does anyone have a suggestion to correct. I called Apple support and they felt it was the software update because it worked prior to the update however they wanted to charge 19.95 to assist. Thank you all.
If it is a hardware issue, then you don't get charged the $19. But, if it turns out to be a setting you messed up, then YES, they will want to charge you $19 to help you learn how to use your phone after your 90-days of FREE phone support expired. Or you could read the manual or articles that are available for free online.
Basically, if you want someone to hold your hand, then you'll pay for it.
However.... having said all of that, try this article: http://support.apple.com/kb/ts1559 -
Revision: 5554
Author: [email protected]
Date: 2009-03-25 13:46:00 -0700 (Wed, 25 Mar 2009)
Log Message:
Updating airframework and flex4 sample eclipse projects to more closely match the options set in the equivalent build.xml.
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/airframework/.actionScriptProperties
flex/sdk/trunk/development/eclipse/flex/airframework/.flexLibProperties
flex/sdk/trunk/development/eclipse/flex/flex4/.actionScriptPropertiesIf you're still using Buckminster 3.6, I strongly suggest switching to 3.7 - it has a number of bug fixes and improvements. This applies to both headless, and the IDE (assuming Eclipse 3.7 Indigo).
Matthew -
Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laciOption 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Apple company . Most of iPhone 4g phone users complain about the OS7. Set as a survey of users of iPhones 4g to roll back the OS 6.1.3. Apparatus doesn't work as has to work. Constant lags am feeling it is not iPhone. It is Android or is worse than the Chinese phone.
Apparatus doesn't work as has to work.Constant lags am feeling it is not iPhone.It is Android or is worse than the Chinese phone. Phone simply brakes... to it чото doesn't suffice
Maybe you are looking for
-
Mac OS-X 10.6.8, Safari 5.1.9, Flash Player 11.7.700.169 , all i get is "Blocked Plugin,
Mac OS-X 10.6.8, Safari 5.1.9, Flash Player 11.7.700.169 , all i get is "Blocked Plugin, I have tried for 3 days to install. Unable to watch any videos on youtube. Keep getting prompted to download, says install complete, but every time i click on
-
Mail app marked an email as junk, missed job opportunity. How can I fix this?
I pipe my school email to my gmail account, which I use the mail app to view. It usually works nicely, but I was going through my junk folder and noticed I missed a job opportunity because mail app sent it to junk. This has never happened before. I a
-
Having trouble getting my online albums saved onto my hardrive . . .
I am a new user for the Photoshop Elements 8 and I have also just recently purchased a new computer and a new camera. All these new things are not making for very easy time for me! I did manage to get all of my pictures onto the PE8 but when I firs
-
How to see Control chart for a specific date range in QGC3
Hi I am developing SPC for my client.I am facing one problem. I am using one control chart for all inspection lot for a particular MIC.Free inspection point is used in inspection plan. Control chart is used 516.(XMR chart) Now when i am calling contr
-
Search cluster PCL4 user-exit or BADI, enhancement
Hi, i need to add some code when the system has finished to record the PCL4 cluster (HR), but i don't find user-exit or BADI's. Thanks for your help.