About the wifi disconnection problem that me and many of you have...
Before making a hasty post on this new chic discussions forum I went through the recent activity and found many of you randomly loose connectivity to their wifi routers. I recent bought a Belkin Surf 802.11n router and have been having similar problems. The Airport icon would show connectivity but safari would fail to load pages, including the router's gui page.
Upon reconnection things would work fine.
I found something common among all the times this happened to me. My iPhone 3G was placed just next to my MacBook pro, about 1 feet away, on the desk whenever this happened. also, it comes across the path of the MacBook pro and the router.
I'm wondering if this is a problem relating to signal interference. interestingly, the old router was a/b/g and the new is a/b/g/n and the iPhone 3g is only up till g. so it could possibly me a signal mix up of the two devices, MacBook on n and iPhone 3g on g.
has anyone of u too had a wifi device nearby when this happened, particularly an iPhone 3g.
also, if this problem is because of something else, please tell me what it is and what's the solution, if u know.
thanks.
Neerav
Message was edited by: AceNeerav
Hi Macybean,
Please continue your other thread here:
https://discussions.apple.com/message/15051193
You obviously haven't found a solution yet, and didn't add that detail there. It is better to finish one thread, get it answered completely, than interrupt another person's with a "me too" especially if there are numerous causes that could possibly cause the same issue. It is harder to isolate issues, if they are melded in the same thread. Now if you have a solution you can offer, that's fine.
Thank you.
Similar Messages
-
I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
My iPhone 5 is experiencing problems with the Wifi at home. It shows that it is connected to the wifi but anything that uses wifi (apps etc) doesn't load content and just looks like it's loading forever but nothing ever comes. However the wifi and wifi/internet dependant apps work sometimes but it's rare. How do I fix this?
Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist. -
Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone) so that person can find their iPad coz the police would of taken mine if I did not show proof of purchase
You are not communicating with Apple by posting here. Everyone here is just a fellow user and cannot fix anything.
The Find My iPad service may have indeed been accurate to the limits of the technology. Unless the iPad was a 3G unit, location is determined based on the nearest WiFi router which in your case could just happened to have been yours. The police may be the ones who need to "fix" their understanding of how the technology works and its limitations.
If you want to provide feedback to Apple on the matter, you can do so via their feedback pages:
http://www.apple.com/feedback/ipad.html
but to be of any good you'll have to provide them with more precise details.
Regards. -
Hello! Since the emergence of appstore, constantly worried about one very sereznaeya problem that is present on the iphone! When we are on top for free and paid apps, and that we search, choosing a specific application for viewing and after, not downloading the application, we find ourselves back to the top of the list and have to start looking (to scroll) back again!
It's very uncomfortable!
And as far as I know the company in the first place for the comfort of your users! Why for many years you have not solved this problem?
However, I want to say - thank you for your work! Looking forward to September 12th!
Sorry for the translation, it's google ...this is a user helping user forum apple don't read or write here if you want to complain or give apple advice use the feedback channel
http://www.apple.com/feedback/iphone.html -
What is the provisioning feature in the settings under, general>profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3
A profile is used on iOS device to add specific settings and similar things to an iOS device. Tryically, they are added when the iOS devices is controlled by a company or school.
However, some apps install a profile. If your iPod is not controlled by a company or school then it seems an app added the profile. You can good the title if the profile and see if that gives any info. -
product name - iPhone 4s
memory - 64 GB
storage capacity - 56.6 GB
version nos - 8.1.1(12B435)
the WiFi on my iPhone 4s is not working, i have gone to the settings and tried to switch it on but it shows the gray slide and refuse to turn on, what should i do about this.iOS: Wi-Fi settings grayed out or dim - Apple Support
-
I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
EyalI tried this! Somebody suggested it in another thread. It did not work, sadly.
-
curious about the iOS 5 software that is coming out. If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it? or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?
Keaten wrote:
Yea I would have to say wait until the release of IOS 5, because the phone will probably run it a lot smoother. I mean go ahead and buy the Iphone 4 if you are dying to have it, because you can just update it which is no big deal at all, but it would be the smarter thing to wait for the new updates.
And the networ issue as far as I am aware is fixed on the Verizon iPhones, so it really depends on which service you have.
- correct me if i am wrong
Have to disagree here, Apple have not even announced an iphone 5, it is pointless to speculate that we will see one or not see one until Apple actually releases a statement. ios was built and tested on the iphone 4 so there will not be any slowdown or laggyness compared to a phone that has not been released yet.
If we are advising potential apple product buyers then we should not be putting them off buying a iphone 4 on speculations alone. Just because apple have for the last few years released an iphone every june/july does not mean then have to stick to this approach.
Apple have not issued any statement regarding an iphone 5, until this time it does not exist, only in heresay on the internet.
Any one looking to get an iphone 4, to you i would say waiting until ios 5 is released is a personal choice, no matter if you wait or not you will be able to update via itunes. One way or another in the future you will have to do an ios update via itunes whether this is the 5.0 software or 5,2,1.
Please note that Apple are very closed mouthed about new hardware releases and potentially a new iphone could be round the corner, however there is no evidence to suggerst this, i.e Apple have not even mentioned an iphone 5 this year anything you hear towards the contrary is media spin thus far and speculation.
ios 5 was built and tested to work seamlessly on iphone 4, the beta software released to developers is being tested on iphone 4. Please do not listen to people telling you that the iphone 4 will not run this ios as well as a phone that does not exist yet. When iphone 5 launches it will most likely have dual processors and not until its launch will the next gen apps start appearing. -
My iPhone will no longer picks-up the wifi at home(comcast). My mom used to have comcast and I used to connect there as well, but she changed to verison and I connect there, but no longer can get the comcast wi-fi at home. The wi-fi settings are ok there, but blank at home now. The phone's network settings are fine because I can join other wifi networks. I've done a reset with no results. Is there a manual way for me to restore the comcast wifi from the router?
First thanks for the reply and second sorry about the confusion. I was unable to get the full message out, but here's the problem:
Like I had mentioned, for a long time both me and my Mom had comcast and as soon as I came into both dwellings the phone would automatically jump onto either wifi network. Then a while ago she verison and used the same Belkin router. So there was no problem and my phone jumped on her system as usual, but at some point something happened and when I got home I noticed that the phone asked to be put on my system. I would input the password, but it would say "unable to connect" to the network. I did the standard things like check the network settings on the phone itself and they were fine. Then I did a reset (actually twice) with the same result. It seems like the phone ability to pick-up wi-fi is ok because when I go to my University I can log-in with no problem. The only thing I noticed is when I look at the settings (on the iPhone) for the router at home the whole thing is blank. My question is: Is there a manual way to get the phone to pick-up my router? I need to have it on my network at home because I use DocumentsToGo a lot. Thanks again for your response again and I hope things are clear now. Have a great day.
Michael -
Public request to Apple about the WiFi mess
As a faithful Apple user I am deeply disappointed by the lack of response by Apple about the wifi problems many users (including myself) are experiencing. What makes the whole issue worse is the lack of a public statement by the company over this mess: calling the support doesn't take us anywhere as we are treated like idiots who can't use the device - "Are you sure your router is working properly?" - "Try with another wifi" - ""Have you tried to reinstall the Os"....
It's time Apple publicly acknowledges the problem and offer some sort of solution as more and more users (including myself) are swiftly thinking about switching to a more reliable company. It's very sad to witness the downfall of a good company like Apple who is basically refusing to acknowledge this problem. Leaving things in the dark won't help the reputation of the company, quite the opposite!
If it is not a hardware issue, as it maya well be, let us downgrade to a previous version of the iOS and check if it works.
I am on the verge of loosing my patience and frustration is building up too quickly. I have strong doubts I will be buying Apple's products in the future.WiFi problems have been around as long as there have been WiFi devices on all hardware. Go to support sites for any mobile device and you will see WiFi issues so buying other products may not solve your issue.
It may indeed be a hardware issue that became evident on your iPhone during the upgrade. Have you had your iPhone checked?
Apple rarely announces what they are doing with issues like this. With WiFi they might as well issue a blanket statement that they are constantly working on it (and they are). Go here: http://www.apple.com/feedback/ipad.html and enter detailed information about your issues and have your phone checked out. -
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
TS1559 Any Solutions to the WIFI Grayed Problem in 6.0.1?
Any Solutions to the WIFI Grayed Problem in 6.0.1?
I tried everything
NW reset
Restore
Freez
You name it, nothing works, its a software issue since bluetooth works fine and even the WIFI used to work fine under the 5.1.1 OS, the problem is in the new update 6.0.1 OS and whats bothering me the most is that Apple doesnt seem to care
Maybe you are looking for
-
MacBook Pro Cannot Connect To AirPort
Hey everyone, Today I opened up a brand new MacBook Pro to find that it couldn't connect to AirPort. I use a WEB 40/128-bit hex. Is that a problem? I use a D Link router. Every time it comes up with "There was a error joining the network "networkname
-
Gray and white smudges in MacBook Pro Screen
About 1 week ago, I noticed 2 faint grey smudges in the middle of my MacBook Pro screen. I dismissed it at the time because I could barely see them unless I looked extremely close on a dark screen. I opened my computer up yesterday to see that the am
-
Hi everyone I am still not 100% clear on the formats used by LR. I import my Nikon Raw files & convert to DNG. In LR I can do capture sharpening & most processing needed to most files. Using DNG format LR stores any data with the DNG & no sidecar fil
-
Export data to excel scientific notation
Hello, How can I export data to excel such as 9900007600000018463000, 9900007600000018473000, etc. without transforming them into scientific numbers like 9,90000760000001E+21 ? Thank you for your help
-
HT1212 How do I unlock and reset my 4s? . iPhone Disabled
I recently purchased an iPhone online and it is loced and disabled. I attempted to connect to iTunes and add new device however this has not worked. How do I unlock this phone and reset it?