About the working area...

Hello everyone!!! I'm quite new here if you've never seen me
before...I'd be thankful if one of you answer my question...
I set up my working area as 550x440 pixels, but at the moment
I run the SWF it shows all the objects as their original size, not
only what I placed into the "white" working area...I mean, the
canvas...
After all I placed a mask to the entire animation and my
problem seemed to be solved but soon after I realized that this
mask slows down many frames of the animation I don't know why....Is
there another solution for that problem??? Because when I don't use
the mask everything runs very well but the problem of the objects
size is still there...
THANKS!

Edit > Preferences > General - Test movie - uncheck
open in tabs
Also, that is for testing only, you don't need to mask the
stage. When you
put it on a web site, or make a projector, the stage size is
honored and
anything outside of it will be clipped as you'd expect.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Similar Messages

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How to make the CTI respond to the work area again?

Hello,
i suddenly have a unusual problem (4 me). I work on a project and i noticed today that the CTI dose not act according to my work area when i RAM preview. After pressing 0 it just goes after the end of the work area continuing to render
. (green line)
And also it does not start to render at the beginning of the work area. It uses somehow the comp's lenght...
Please advise.
Thanks!
I attached a photo so you can see what is it about.

If you leave "From current time" enabled, you can use 0 to audio preview from the current position or shift-0 to audio preview from the beginning of the comp.

Report RSWUWFML to send mails to Outlook about the work item Arrival

Hello,
Report RSWUWFML to send mails to Outlook about the work item Arrival - Can we make settigns so that only work items pertaining to Leave Requests are sent to the Outlook.
Please help.
Regards,
Poornima

Hi Poornima,
RSWUWFML is very old, you should use RSWUWFML2 at least but if you are on release Basis 6.40 or above you should use Extended Notifications. As mentioned in the other posts you need to restrict your selection criteria by task TSXXXXXXX. The task associated with the work items you want to send a notifcation about. You need to open the workflow definition and open the step in th definition that corresponds to the work item.
Another way would be to highlight one of the work items in the users inbox SBWP in the backend and click the "Details" button in the toolbar. You will see the task ID listed there.
Regards,
Eddie

Using The Work Area Like A Camera?

Hey everyone.
Okay so I'm doing a flash project for Uni.
I am making a sequence with a treasure map and Xs and dotted
lines & what not.
The only problem is that the Map is about 2 times the length
of the work area.
Usually I would just key the map to move up wards, but I have
multiple layers which
wont comply with that.
I was wondering if there is a way to move the focus of the
work area & use it like a camera
I guess.
Thanks.

http://www.oreillynet.com/pub/a/javascript/2004/08/17/flashhacks.html?page=2

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How to delete a shortcut favorite from the browser in the WORK Area

Hiho,
creating a shortcut favorite icon of a browser-website in the work area shows up a symbol to use this shortcut. In the private area I can delete this favorite-symbol by tapping longer on the icon an a trashcan shows up, so I can delete the icon (and the browser favorite from the private area). Not so in the work (buisiness) part of the BlackBerry, there is no possibility to delete this icon. I can't find a policy on the BES10 server or thomething on the Z10, any ideas how i can remove the icon?
Greetings... Ifrani

Hi Ifrani!
I´ve the same problem on my Z10!
CommanderApollo

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

Item & for schedule line & is in the work area

Hi All,
We added some custom fields on the schedule line tab and also in VBEP table. For thie same we also added code in the PBO module of SAPMV45A/4500 screen#. Since we added the code we are getting the error message# V1357 with description 'Item 000010 for schedule line 000040 is in the work area'.
I did check the forum and found couple of notes with this error and some replies say that it is for the quality issue. I tried going to OQ77. But i am pretty sure it is because of what i codded. Because When i comment my code so error shows up. But I am not sure what is the problem with my code.
Here is the sample of my code that i wrote in my PBO module:
    IF XVBEP-VBELN IS NOT INITIAL.
        INPUT = MARA-BRGEW * XVBEP-WMENG.
        PERFORM CONVERSION.   "This is the module that i wrote to convert from G to LB.
        XVBEP-ZTOTALWT = OUTPUT.
        xvbep-updkz = 'U'.
        modify xvbep index ivbep-tabix.
    ENDIF.
Please let me know if i am doing wrong anywhere in the code.
Thanks,
Karuna.

Issue: I got the issue resolved. The mistake i made was the local structure was holding last item which has 1 schedule line and the my first item10 was having more than 1 schedule lines and trying to loop all the schedule lines. As the last item has only one schedule line i was getting the problem.
Solution: I reset the structure to that it will loop from the first line item instead of it holding the last item#.
Hope this helps.
Karuna

Problem in Printing the work area

Hi Everybody,
I'm working in upgrade project.
in 4.7 version, directly trying to print the work area and assign to some other fields.
Eg: write: Mara.
text = mara.
but in 6.0, its not allowing to assign directly like this.
Plz help me urgently. B'coz, we struck in middle.
Thanks in advance.
Regards,
JaganMohan.

Hi,
basically the problem might be in the ecc 6.0 for the attributes of the program where u r writing it might be u checked the unicode check box if it so remove it and then try or else it is proiblem with the unicode in the ecc 6.0 system where u r working
plzz reward if it is usefull
plzz dont forget to reward...

The work area itab is not enough

HI all,
i have written the following code to print data from yemptab
But i'm gettin an error saying that "the work are itab is not enough ". can anyone please guide me here. i'm a fresher in abap.
REPORT YEMPDETAILS.
TABLES: YEMPTAB.
DATA: BEGIN OF ITAB OCCURS 20,
          EMPNO TYPE YEMPTAB-EMPNO,
          EMPNAME TYPE YEMPTAB-EMPNAME,
          EMPCITY TYPE YEMPTAB-EMPCITY,
       END OF ITAB.
SELECT * FROM YEMPTAB INTO TABLE ITAB.
LOOP AT ITAB.
WRITE: /
    ITAB-EMPNO,ITAB-EMPNAME, ITAB-EMPCITY.
ENDLOOP.
Edited by: user2487 on Jul 2, 2010 12:29 PM

Hi,
Use TYPES and Workarea.
types : begin of ty,
       EMPNO TYPE YEMPTAB-EMPNO,
       EMPNAME TYPE YEMPTAB-EMPNAME,
       EMPCITY TYPE YEMPTAB-EMPCITY,
     end of ty.
DATA: itab type standard table of ty,
      wa type ty.
SELECT * FROM YEMPTAB INTO TABLE ITAB.
LOOP AT ITAB into wa.
WRITE: /
wa-EMPNO,wa-EMPNAME, wa-EMPCITY.
ENDLOOP.
Regards
Vinod

Centering the Slide in the work area?

Anyone know how I can get the general work area to display slightly differently?
Specifically, Keynote insists on the slide being shoved up against the top-left corner and I would prefer to have the slide centered in the work area so I can see things "bleeding" off of the page.
I don't get this at all and it's a bit frustrating. Is it me?
Dex

I'd like to see this as well so sent in a feedback form.
http://www.apple.com/feedback/keynote.html
a sort of workaround I've been using is selecting the object I want to move into the slide, anchoring it's move end point and manipulating it's startposition in the metrics tab of the inspector. It works if you're using straight motion paths but if you want to use a curved path or move off the slide, it doesn't always work.
also if you want to move a slide off the left or top of the slide, you can drag past the left/top boundary and even off the keynote window. the anchor will move past the edge. unfortunately the only way to edit it at that point is to delete the action and start over...major PITA.
guess we'll wait for KN09' or maybe Keynote"X"

Pe10: opening a previously saved and rendered project, the work area indicates non-rendered sections

Pe10: when I open a previously saved and rendered project, the work area indicates a majority of non-rendered sections.
When I open a previously saved and rendered project, the work area indicates non-rendered sections. My project is approximately 59 minutes and 27 seconds.
What must be done to have a saved and rendered project, when open again, be rendered?

TRUE_SEEKER wrote:
The price tag of $245 for the Prodad's Mercalli video software is too steep for me right now.
Corel's Avid VideoStudio Pro X4 Ultimate (what a mouthful) includes Mercalli SE. It was on sale at half-price on Amazon Black Friday and I missed it - mostly because I was trying to find out what the 'SE' part of it meant.
Annoyingly (very much so) it seems that Mercalli SE is pretty much the whole deal - a YouTube review of the Mercalli feature in VideoStudio by ProDAD (the Mercalli authors) included all the features I would expect to use.
So it seems that the $80 VideoStudio product includes the $150 Mercalli plug-in. Thus a workflow starting with Mercalli stabilisation in VideoStudio and then switching to PRE is viable. I can't really afford the full price VideoStudio product so I'm hoping for a similar 50% reduction after Christmas.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Error while initializing the work area SYST

Hi Experts,
we did a kernel upgrade in NW 2004 from Kernel 640 to Kernel 700.
OS : UNIX DB: Oracle
At Os Level SAP and Oracle started.
when we try starting the SAP,
it shows the following error : error while initializing the work area SYST
Thanks in Aavance,
Satish T.

> Did you get the solution for this? if so, could you please share the same with me. I also got same error after installing the SAP. From OS level everything looks fine but getting the same error while trying to login from SAP GUI as you reported.
The answer is simple: Use the proper kernel
If this is a new installed system and you can't logon please post the logfile dev_w0 here.
Markus

The work area "IT_ITAB" is not long enough

I created a interna table IT_ITAB with OCCURS 0, But it's giving error as
The work area "IT_ITAB" is not long enough.
So pls send the correct syntax to solve the error....

data : it_data like standard table of mara occurs 0 with header line.
Above syntax is not working...its giving error as "OCCURS 0 is not expected".
I have one more dought...In the report I am providing some of the fields from my own database table.
1. Can I provide the fields when using the WITH HEADER LINE concept.?
2.Can I avoid BEGIN OF after "DATA :"?
3.Pls tell me the exact use of STANDARD key word.
4.What is the memory sys assigning dynamically when using OCCURS 0?
5.What is the syntax to increase the memory?

About the working area...

Similar Messages

Maybe you are looking for