About to throw this Envy17 out in the trash

While typing, the focus jumps from the active screen to who the hell knows where...  I lose entire documents, sometimes it opens odd windows and like on this post, it took me three runs to type this much...  
I have turned off the touch pad (no help)  and this GD thing is starting to really piss me off....
Anyone else see this?

If you still feel like throwing it in the trash just send me a PM and I will send you a prepaid shipping box addressed to me, made up to look like a wastebasket.

Similar Messages

  • About to throw this mb OUT THE WINDOW

    Ok bought a new 915p combo Motherboard and it posts and does all of that just fine.
    However Now I cant get it to boot Xp. And yea I know what your going to say fresh install xp
    but there is another glitch I cant even get it to run my harddrive utility disk or cd.

    Quote from: Grey Falcon on 20-February-05, 07:50:13
    OK I got to the 1st part of the setup
    Works fine up till the point of the 1st reboot then it just wants to restart back the begining again
    This might seem utterly, absurdly, stupidly obvious, but in my experience sometimes obvious solutions are the most difficult to arrive at. You say it wants to start back at the beginning after the first reboot: have you either taken the CD out of the drive or changed the boot order in then bios? I’ve seen the setup program just initiate itself on the first reboot when I hadn’t even touched the keyboard (you’re supposed to get the message “press any key to setup windows” or some such) That sounds like what might be happening.

  • Help before I throw this printer out of the window!!!!!!!!!!!!!!!!!

    I have just purchased a Deskjet 2540 all in one printer - I will only ever need to print boarding passes etc. -
    this looked so good on Amazon ideal for my iPad and said how easy to set up!!! In my dreams - I have now spent 10 hours
    Trying to set this up and last night was close to cracking:-
    I am setting this by wirless. I have the password and the printer showing on my iPad.
    Each time I try and load the softwear I am told an unexpected error has occurred please try again later - I
    Have tried and tried to no avail. Apple staff have said I do not need this softwear????????
    The network test results say:-
    1 check the printer network name ssid matches your wireless router network name ssid exactly!!!!!
    2 if they do not match exactly, run the wireless setup from the printer software to configure your hp printer!!!!!
    But no where can I find how to do this and sorry I really do not understand what this means.
    Reading Amazon some people have set up in 15 min!!!!
    The cost of bringing in an expert to set this up is worth more than the printer cost!!!!!!
    Thanks for reading feel better letting of steam will defiantly be a 0 from me for the feed back to Amazon

    Hello SueJon,
    Welcome to the HP Support Forums!
    I hope this reply finds you with the printer not thrown out of the Window. Regarding the Deskjet 2540 setup to work with the iPad, I would like to help.
    There are two ways that you can print from the iPad to the 2540. The first, Wireless Direct. Wireless Direct is a network that the printer broadcasts and the iPad would connect to it. This method will leave the iPad with no other network access while connected.
    Second, and more functional, is having the printer connected to the same network that the iPad is connected too.
    In order to setup this connection, follow the steps outlined below;
    Turn Wireless Direct on from the front panel button on the printer. (number 4).
    Connect the iPad to the printer network, Settings> Network> HP-Print-2540.
    Open Safari and type this I.P address into the address bar, 192.168.223.1 and hit Enter.
    Go to Network or Wireless and then Wireless Setup Wizard.
    Select your network and enter the needed information.
    Once connected, the Wireless light should be solid, connect the iPad back to your network. To print, open a document, hit the Share button (), and if an option to print is available you will be able to select the print option.
    I hope you find this information helpful.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • A/V not working...am ready to throw this modem out of the window

    got a Zoom 5560 Ethernet modem/router for my new iMac Intel core duo with built in iSight as the modem i ran on my old imac is not supported (USB OneTouch 330).
    I have done all i can as found in this forum:
    Mac OS X Firewall is off
    Quicktime streaming to 1.5 mbps
    iChat video to none (and also tried various settings)
    Ports open in NAT in Zoom modem/router (4099, 5190, 5193, 5297, 5298)
    Why can't i video chat via iChat, the old USB modem worked out of the box, but obvioulsy i can't use this unsupported device any more and my old iMac is no longer with me in this world.
    Please need help!!

    Great allows only 24 entries.
    I wanna try the DMZ feature but can't seem to find the right place to do it in the Zoom X3. As usual the help stuff is mainly in the installer and that being windows means its not accessible. Ifound this on the Zoom website:
    =============================================
    < Open the Zoom Web Console (<a class="jive-link-external-small" href="http://">http://10.0.0.2), click Advanced Setup, and click the Misc Configuration button.
    If you are using PPPoA encapsulation, from the PPP Half Bridge drop-down menu, select Enable.
    Click the Save Changes button and then the Write Settings to Flash and Reboot button.
    Now you must change encapsulation setting from the default the PPPoE LLCSNAP to PPPoA VCMUX. To do this, click Basic Setup. Then from the Encapsulation drop-down menu, select PPPoA VCMUX.
    Click the Save Changes button and then the Write Settings to Flash and Reboot button.
    Verify that your TCP/IP properties are set for DHCP. You may need to release and renew the IP address. Refer to the instructions in the Zoom ADSL Modem User's Manual (click on Documentation in the main installation menu of the Zoom ADSL CD). Note: The IP address should be the same as the WAN status IP Address, which is located on the System Status page of the Zoom Web Console>
    =============================================
    Okay, my biggest problem is that I'm in Austria with my iMac G5 and my mum is in England with her new iMac G5 intel duo core, so i'm trying to set her Zoom X3 up via telephone with my mum who is 65, yeah so thats the deal!
    So any help would be greatly appreciated.

  • HELP! I am about th throw this iPhone out the window!

    I have had to restore my iPhone TWICE now with tech support guidence. I've has nothing but TROUBLE since both the 3.0 AND the iTunes update, and am BEYOND frustrated!!! I won't even go into all of what else went wrong previously, but now my photos will NOT show up in iTunes to sync on to phone. I have troubleshooted by reading on here...I've tried everything. Before all this trouble I had done it so I know it's not just me. The folders show, but they say 0 pictures.
    Again I'm SO SO SO frustrated. A phone I LOVED and was thrilled with has been nothing but pure frustration since the 17th. Everything I do on it is nothing but a hassle and 2 hours of MY minutes with Apple techs!!! I ahve to admit I am in tears right now.
    I hope I get some replies (!!!!) and thanks in advance... why will my photos not show up? Just empty folders???

    OMG OMG I am so embarrassed....they DID go to the folder as PPSP files. I'm so sorry! Thank you though for taking your time on me. I will go change them all and see if that works. If not I promise i'll come back here before tossing the phone out the window Again I'm sorry...but hey, if it weren't for you I never would have checked. I don't know why it saved them like that!

  • I'm about to chunk this thing out of the window.

    I have never in my life owned a peice of apple products. I decided 2 months ago to purchase a 30gb Ipod for somewhere around $300 in order to provide me with music for my office. Well this has been the biggest waste of money in my life and I cannot get over the fact that this f**kin thing wont work. I have two computers (one at work, and one at home). My computer at home is my main linked computer, I have all my music on that machine and that is where I update my Ipod. Everything works fine there and has since the day I got it.
    The machine at work I just want to listen to the music on my ipod and this f**kin crap wont work. I called Apple 2 months ago when I first got it and all of their suggestions were failures. (do they even know what they are doing?) This is what has/is happening in the order in which it happened.
    1. I reformatted my computer.
    2. I installed itunes,quicktime, and ipod updater from the disc that came with my ipod (followed every instruction)
    3. restarted the machine per the request of the install.
    4. plugged in my ipod and ran the updater.
    5. itunes launched and there was no ipod recognized, but it was in my disc management list.
    6. i had to change the drive letter... i choose I:\
    7. Itunes now recognized my ipod and displayed the songs on the ipod, only in grey and i couldnt play them...????
    8. I ejected the ipod and restarted my machine.
    9. plugged in ipod, itunes launched and showed the same thing as before - all of my music was in grey and inactive.
    10. I went to my computer, now the ipod was not there.
    11. went to disk management, and the ipod was not there.
    This is the craziest f**kin thing ive ever seen and no one can give us an answer for it. It makes no sense that my machine at home it works fine (so no problem with the ipod software), yet the comp at work is not working...
    ive tested, reset and diagnosed all of the usb drives on my machine, they are all fine. this computer is a workhorse and has the same exact OS with the same updates as the one at home....
    WHAT IS THE DEAL APPLE??????
    I was actually thinking about purchasing a G5 to replace my home pc for my webwork.... well with mass problems like these and absolutely no help from the manufacturer.... i think ill just stick with my PC this is absolutely rediculous.... and if i call you, you want to charge me something like $30 an hour to help me when i already spent $300 on the f**kin paperweight in front of me..
    A sincerely unhappy customer
    30gb IPOD VIDEO   Windows XP   THIS IS CRAP

    It does pay to be nice sometimes. Apple employees do occasionally post on the boards, but I doubt that they monitor every last thread. And yes, they do charge for tech support, but it is not $30 an hour. It's $49 for one problem, or $59 for the Applecare plan. Which, to tell the truth, really isn't the worst thing to purchase for the iPod.
    Now, from reading your post, it looks as though you want to listen to the music that's on your iPod through a computer with an iTunes program on it that your iPod is not linked to.
    Do this:
    Connect your iPod.
    Click Edit > Preferenes
    Click the iPod tab
    Select "manually manage songs and playlists"
    Click OK
    Your iTunes will say "updating iPod Do Not Disconnect" at the top
    Wait for it to say iPod Update is complete
    Click on your Library in the source list
    Click on your iPod in the source list
    Are the songs lit up now?
    CG

  • Ok I am about to throw my mac out of the window. Again.

    I am trying to open iPhoto and I get the following message.
    Unable to write to the library "iPhoto Library"
    Check that you have permission to write to the library directory.
    Any suggestions before my mac is sat next to its maker Steve Jobbs?

    So I had to deliberately set the permissions incorrectly to no access and then allow the system to 'repair' the m
    permissions for it to work.
    Come on apple I am seriously losing faith and considering switching back to Microsoft. Surely the reason why we spend over the odds money is for our lives to be made simpler and for Apple products to work with a minimum of fuss. Mr Jobbs would be turning.........

  • Please help before i throw my laptop out of the window!!!!!!!!  :-)

    OK, so I have been surfing the net for help/solutions but to no avail...
    When I try and burn a disk from itunes on to a blank disk i get the 2131 error which judging by the ammount i have seen written about it, is VERY common.
    I am about to throw my laptop out of the window as I cant fix it and am have just spend my Christmas itunes vouchers on downloads!argggggggghhhhhhhh
    My cd driver is SN-S082H ATA ???? please does anyone have any ideas what i can do??????
    Many thanks, in advance! Jen.

    Since the issue really is not related to the focus of this forum...compatibility issues between Mac OS and Windows, you should 1. Try a different brand of discs. 2. Post your question on the iTunes forums: http://discussions.apple.com/category.jspa?categoryID=150 3. Post your question on a Windows forum such as those at http://www.windowsforums.org

  • I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the

    I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the window!! Can you tell me what is the problem? No it does not exceed 100 M. either.

    Adobe Reader never converted Publisher files to PDF, for free, never. I suspect you use to have the (paid for) Adobe Acrobat. Sometimes people have Acrobat (more than $300 worth) and install Adobe Reader over the top, losing that valuable software.
    That said, if you subscribed to PDF Pack it should do this conversion. What exactly happens now.

  • How do I get to the InDesign screen to begin testing this product out in the free trial?

    How do I get to the InDesign screen to begin testing this product out in the free trial?

    in ios 7 if you click the home button it takes you home. if you double click it it shows all the apps running in the multitasking bar. on ios 6 they looked like actual apps on ios 7 its the page of the app

  • I am trying to help a friend who`s imac is giving her trouble. when the user logon is typed the machine begins to load, then in about a minute, kicks back out into the logon screen. ANY insight to her problem will be greatly appreicated?

    I am trying to help a friend who`s imac is giving her trouble. when the user logon is typed the machine begins to load, then in about a minute, kicks back out into the logon screen. ANY insight to her problem will be greatly appreicated?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    http://support.apple.com/kb/ts1417

  • Can't get photos out of the trash?

    I just tried using iPhoto Diet on my library (around 10,000 photos & 9GB). It moved a bunch of photos into the Trash that, it turns out, aren't duplicates. So, I want to take them out of the Trash and put them in my main library.
    The trouble is, I can't seem to do that. I've created a new folder to put the files into, but when I drag the photos out of the trash the icon never changes to the green "plus" sign that you normally see. I've tried using the "Export..." command but it's greyed out.
    Is there any way I can get these photos out of the Trash? I'm a little confused right now! This is iPhoto 6.0.5 under OS X 10.4.8 (PPC).

    Hi Terrence,
    Sorry, you're right: what I meant was that I couldn't put them back in an Album, not a Folder. Interestingly enough, I just created another Album and tried it again. I selected all the photos (around 900) that were in the iPhoto Trash, then dragged them into my new album.
    The cursor turned into the green "plus" icon as if it were ready to let me move the files out of the Trash. Then, strangely, iPhoto didn't draw a black box over the destination album like it normally does. I clicked on the new album I'd just created, and it was empty. Stranger still, it looks like the photos have all been put back in their correct albums?!

  • How can I get photos back out of the trash

    How can I get photos out of the trash?

    Badmjam wrote:
    Where is the dock on the iPad?
    For answers on iPhoto for the iPad you need to post that forum - this is the iPhoto for Mac forum
    LN

  • I unintentionally deleted the first segment of some video.  I was able to get it out of the Trash and into "Finder", but I cannot restore it to iMovie and the original video.  Help!  How do I move the video (now in Finder) back to iMovie?

    I deleted (to Trash) a segment of "raw footage" from an iMovie project that I did not want to delete.
    I was able to retreive it from the Trash and move it to Finder, but I cannot figure out how to move it back to iMovie.
    How do I do this (restore the video segment to the start of the project)?
    Or, do I have to load the original video again from the camera?

    @ "Afterimages":
      Well, yes, I suppose I could re-import the video.  (LIkely ALL of it, dammit!) 
    So, unless I'm mistaken that would be the "long way" to resolving this issue.
    I was able the take the deleted video out of the Trash and now it's in Finder.  Why can't I simply re-insert it into iMovie where it orginally was?  That would be the simple solution, just "click and drag", or something like that, correct?  Maybe that's impossible?  (In which case, I must ask, "Wouldn't the creators of iMovie have considered this "boo-boo" and done something to remedy it easily?"  I doubt I'm the first vidiot to do this...

  • I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

    I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

    See
    Deleting backups via the Finder on Lion 10.7.x or later:
    http://pondini.org/TM/12.html
    Hold option (alt) while emptying the Trash.
    See also
    http://pondini.org/TM/E6.html
    Message was edited by: WZZZ

Maybe you are looking for

  • Access via 'NULL' object reference not possible.

    hi all,                    i am getting the following error in my application(getting data from 2 data base table and kept in internal table and binding that 2 internal table to two context) in st22 i have this. Error analysis     An exception occurr

  • -8 error

    I recently experienced a brief power outage and reset cable modem and router according to Comcast directions on the phone. I can no longer ichat (Mac) audio or video while going through the router. We've checked all the prot settings etc, and upgrade

  • Help with apache mod_perl

    I'm in the process of teaching myself perl, and I've also just set up a server. I'd like to combine my efforts .    I'd like to know how to set up apache with mod_perl. I gather it will probably need some sort of recompilation? I also don't see a mod

  • How to find the JavaScript Script Actions?

    Where can I find the JavaScript Script Actions for being executed in the Correlation Engine Java VM process? sonfan sonfan's Profile: https://forums.netiq.com/member.php?userid=692 View this thread: https://forums.netiq.com/showthread.php?t=42697

  • Security API  on web.xml

    hello i'm java junior programmer. my file web.xml bind the follow tag <security-constraint> <web-resource-collection> <web-resource-name>UIWebSecurity</web-resource-name> <description></description> <url-pattern>/</url-pattern> <http-method> GET</htt