About tpbegin,need help!!!
when i use tpbegin before call a remote service,what should i do to set the
environment,and whether the database(Oracle) must support XA ?
if i use transaction in my application,what should i do? environment£¿
ubbconfig£¿bdmconfig? or others
fish
You can, however, since you can only sync with one iTunes library at a time, if you elect to sync your music, all music on the phone will be wiped out and replaced with what's currently on the computer.
Similar Messages
-
i have installed a vncserver from solaris companion CD. when i start the server by using #vncserver command, i can connect it use IE with http://192.168.1.10:5801, but it just is a console window, not my solaris JDS3 desktop, BUT i just want to see the desktop.
What should i do?is there any other way?
thanksyes, i have changed the last line of .vnc/xstartup from twm to gnome-session. BUT, the problem is the same. Any suggestion?
-
since ive moved, i dont have my coputer i set my phone up on.
can i update my iphone on any computer as long as im logged into my apple acount?????
thanks!You can, however, since you can only sync with one iTunes library at a time, if you elect to sync your music, all music on the phone will be wiped out and replaced with what's currently on the computer.
-
So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?
Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.
-
This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though. WHATBCAN I DO TO MAKE MY APPS STOP CRASHING. I ALREADY TURNED IT OFF THEN ON AGAIN AN IT STILL CRASHES. HELPPP!!!!
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Hi All,
Em..i just need some advice about choosing correct career path.I graduated with a first class in IT with business information science in 2009. In 2009 after looking for jobs for few months i took a manager post in a petrol station which i never wanted.(Due to the credit crunch & the Family financial reasons) .Then unfortunately i had to stay out of work for 18months due to a serious spinal code operation i had to face.now in 2011 July im fit & ready to start my life again. but im lost where to start/ which career path to choose. (i've still got the job at the petrol station as the manager)
ive liked data base management subject when i was in the University so, Ive been reading OCA-051 & interested on OCA qualification I just want to know what are the possible jobs i can apply if i get the certification? Basically what should i do to get any IT related job? :( ( i dont like programming)..
Please be kind to reply.
ps:i live in the Uk.
Thanks.872882 wrote:
Hi All,
Em..i just need some advice about choosing correct career path.I graduated with a first class in IT with business information science in 2009. In 2009 after looking for jobs for few months i took a manager post in a petrol station which i never wanted.(Due to the credit crunch & the Family financial reasons) .Then unfortunately i had to stay out of work for 18months due to a serious spinal code operation i had to face.now in 2011 July im fit & ready to start my life again. but im lost where to start/ which career path to choose. (i've still got the job at the petrol station as the manager)
ive liked data base management subject when i was in the University so, Ive been reading OCA-051 & interested on OCA qualification I just want to know what are the possible jobs i can apply if i get the certification? Basically what should i do to get any IT related job? :( ( i dont like programming)..
Please be kind to reply.
ps:i live in the Uk.
Thanks.You'll sit on your bum and ruin your back again with most IT jobs. With your government shrinking, OCA qualification won't have much worth unless you personally know someone in the private sector that needs help. An operator job with your petrol company (assuming it's not just a mom 'n pop station) would probably require heavy lifting.
IT is a good, solid, growing career path, but most of the work is still programming, and most ways up to better jobs go through that experience. You might be an exception if you have a way to join other skills with your IT education, such as business analysis or sales or web prettyfying. Perhaps the determinants are your personality and goals.
I know, it's tough, but if you are honest with yourself and check out some of the "what color is my parachute" kinds of career advice books, you can find a happy medium. There actually are some benefits in starting a career during economically troubled times, but you only see that in retrospect. You have to decide on goals, pursue them vigorously, and reevaluate when it doesn't work for you. -
Need help about Hidden Markov Model model
I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanksHave you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM -
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)
Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule -
I bought my iPad off a friend and it is hacked. I can't upgrade the software to iOS 5.1 it says unable to update. And something about me not being eligible. I need help please
If the device is jail broken - and the message is that the iPad is not eligible for the requested build - there are tons of articles on the internet that discuss how to fix the iPad. Use Google.
-
what do yu mean by security software....is it all about disabling my antivirus....i need help on this...cze my 3g is showing error 1015
See this discussion: https://discussions.apple.com/thread/5110212?tstart=0
-
Need Help About AC or battery or pc :(
Hello!
i am kinda new to the forum,i have GT70 2pe dominator pro laptop(bought from ibuypower) When i play demanding games,my ac unplugs itself from the laptop i dont know what to do ,i updated ec,bios,did the ec reset,battery calibration(from msi support page), but i did these long time ago i dont know if this started then or the problem was already on pc when i bought it,i didnt test playing demanding games before i did those things
I tried playing w/o battery sometimes when the game loads laptop shuts down
So i really need help..?i think i have the correct model,well if it is going to fail can i use it until i buy a new one 2 weeks later?,i mean is this going to do harm to my computer until i get a new one?
Thanks for the help (sorry about the full sized picture) -
Hi everybody!
I'm from Italy, so I need help regarding button
I create an animation, I put a button to replay the movie by this code:
on (release) {
gotoAndPlay(1);
but in AS3 doesn't work. Can you help me pls?
Another problem...I need a very simple preloader that display only percentage, stop.
Anybody knows a template or tutorial about this?
Thx in advance!What do you mean by scene2?. You can only preload external content like a picture, another swf, etc...a much simpler example:
var myLoader:Loader = new Loader();
addChildAt(myLoader,0)
myLoader.load(new URLRequest("http://www.snowman-jim.org/science/images/north-pole-sun-moon.jpg"))
myLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loading)
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, finishLoading)
function loading(e:ProgressEvent):void{
info_txt.text="Loading.."Math.floor(e.currentTarget.bytesLoaded/1024)" Kb";//e.currentTarget is referring to myLoader.contentLoaderInfo
function finalizado(e:Event):void{
info_txt.text="I'm done!";
Just change myLoader.load(new URLRequest("http://www.snowman-jim.org/science/images/north-pole-sun-moon.jpg")) path for the relevant path to the file you want to preload. -
Need help about ref cursor using like table
Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advanceMy understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks
Maybe you are looking for
-
Slow performance of discoverer portlets
Hi, I am running into slow performance of a particular page in portal, there are multiple sites hosted on the portal but these all have static text and are very quick to load but the one page with discoverer portlets and a web-clippping portlet is ta
-
How many downloads do you receive with one purchase of the Illustrator cs6?
How many different computers can you download the program with one purchase?
-
Is there a problem with the latest iTunes update?
After getting the most recent iTunes update my iPhone is no longer recognized by iTunes. When its connected to my computer it charges but you can't see it on iTunes and none of the content can be accessed. I've never had this problem before, and it d
-
Discoverer 3.1 with Oracle 10g
Hi All, I want to use Discoverer 3.1 against Oracle 10.1.0.4 Database and Oracle 10.1.2.0.2 Application Server. This is a temporary solution only, since a client urgently needs to run his Discoverer reports. The operating system of the client machine
-
Whenever I create a web.xml file and place it in to th WEB-INF directory of an application, the app quits working. This is strange. Any ideas? Thanks, William