About TPM module MSI P45 platinum
Hello.
I need some information about this function, supported in MSI P45 Platinum - TPM module. Where can i buy such thing, and eventually prices for it.
Thanx in advance!
TPM is nothing MSI Specific. Please read this article first:
http://en.wikipedia.org/wiki/Trusted_Platform_Module
Similar Messages
-
Msi p45 platinum power up problems
Hey guys, i have got a fairly new system i think its about 2 months old
e8400 e0
msi p45 platinum bios 1.71beta
4g kit 1066 kingston hyperx
palit 1g 4870
huntkey 650w psu
Okay so heres the deal, the computer was running at 3.6ghz, stable for the past 2 months.
I have tried 4ghz with almost every possible combination of volts, but it passed prime 95 for about 36 hours 1 day, and the next have a random reboot
I also noticed that my psu was making this weird whining noise so i just ordered and installed a pc power and cooling 750w.
To my happyness comp booted up at 4ghz and seemd stable enough for 2 hours. (just searching net and stuff) then boom, comp turns off.
okay so i thought maybe it wasnt stable. tried to reboot but to no avail. all i get is about half a second when my fans try to spin up but then it just cuts off again.
i have tested the usual out of box, 1 stick of mem, clear cmos with power cord removed, removed battery for 10 minutes but nothing. Also did the same with the old psu which was working.
All that happends is it trys to start, eg leds everywhere flicker and i mean flicker there is no way i can see what order. Im refering to the 8 leds down the bottom. the flick on then off.
After trying to start it up once, i wont get another chance to start it. eg i have to remove the power and wait till the power is completly gone from the system b4 i can try again and only have the same thing happen.
Thanks for your help guysSomething may have been damaged during overclocking. What voltages did you work on when you overclocked the system to ~4GHZ? What where your temperatures?
Quote
Next, I see that you are using a Beta BIOS, what's the reason behind it?
I suppose the reason is this:
https://forum-en.msi.com/index.php?topic=117741.msg947085#msg947085
Quote
Updated changelog for 1.71:
1.Add the patch for Wolfdale CPU OC capability.
2.Fix the system hang in WHQL after Disable SMBus Controller.
3.Fix the system keep restarting when disable ACPI function and without TPM card.
4.Add CMOS location changed warning code for M-flash boot fail. -
Problem with MSI P45 Platinum DDR2 mainboard and Corsair Dominator PC8500C5D Ram
Hi, I have encountered with a problem.
First I had
MSI p45 platinum ddr2 bios ver. 1,4
Intel E8400
Corsair Dominator PC8500C5D 2x1Gb
2 Asus ATI EAH 3870 Crossfire
and it was running with windows XP without any problems.
Problems began when I decided to upgrade to 6Gb of ram and to install Vista 64. Ram modules witch I bought are the same Corsair Dominator PC8500C5D, but 2x2GB.
When i put them together adjust voltage 2.1v and timing 5-5-5-15 they fail mem test with huge amount of errors.
when I test only 2x2gb modules memtest sometimes doesn't open at all, sometimes just stops working on 8 minutes of test. couple of times they completed memtest without any errors.
Can someone advice what should I do and what could the problem?
Thank you for your answers.Quote from: obsessed on 15-October-08, 18:20:44
Corsair Dominator PC8500C5D 2x1Gb
Problems began when I decided to upgrade to 6Gb of ram and to install Vista 64. Ram modules witch I bought are the same Corsair Dominator PC8500C5D, but 2x2GB.
1) the modules are not the same (the DDR2 chips are different)
2) as general rule, mixing 2x1GB with 2x2GB is a bad idea.
cheers -
I just got done reading the guide on tweaking VTT/GTL which helped me get a better grasp about the awesome settings the P45 have.
Anyway I have a bit of a dillema, I can't seem to get 4.0Ghz without cranking my settings up to this:
Vcore = 1.525v (This will fry it eventually)
CPU GTL REF0 = AUTO (For now)
CPU GTL REF1 = AUTO (For now)
DRAM Voltage = 2.100v (Manu specs)
DDR_VREF_A = AUTO (For now)
DDR_VREF_B = AUTO (For now)
MCH Voltage (Is this the Southbridge?) = 1.556v (I have no idea what to set this to, I just cranked it up as high as it would go)
MCH GTL REF = AUTO
VTT FSB Voltage = 1.60v (What the hell is VTT?)
ICH Voltage (Is this the Northbridge??) = 2.12v
The problem with this is I'm going to cook my system...the funny thing is I can remove the jumpers and run my CPU at 3.6Ghz and all stock voltages without a single problem - however going even 1Mhz above this requires me to crank the hell out of this system.
Anyone here have any settings they use for this board w/ an E8400? I'm kind of out of ideas at this point.
Specs:
MSI P45 Platinum
Intel E8400 Core2Duo @ 3.0Ghz
OCZ OC RAM DDR2-1066 @ 5-5-5-15-2T and 2.1v
Antec TruePower 750w w/ (4) Independent 12v railsQuote
...the funny thing is I can remove the jumpers and run my CPU at 3.6Ghz and all stock voltages without a single problem
Thats a good starting point. Set BIOS to default and then ensure your memory is at DDR2-800 at ~1,9V.
From there start increasing your FSB. I think you will have a better chance at what you are trying to achieve with a lower memory frequency. See how far you can go that way without changing any other voltages, but always check your V Core under load as you increase the frequency.
I have had my proc at up to 3,7GHZ (board jumpers removed) all other BIOS settings being stock/auto, but I manually kept my DDR at 800.
My core Voltage will rise to 1,296 under full load at that freq, which is still below the Intel spec max of 1,3625 "Table 2-3. Voltage and Current Specifications in the Intel spec sheet". So I know there is room for more. My CPU core temps will be between 55 and 60C depending on the auto speed-up of the cooler, which I must say is very effective.
Running some real world tests though, i.e. 3D gaming, I found that the increase above the 3,4GHz I am running now, is hardly worth the additional heat and obvious associated higher voltages. My chipset especially heats up to about 55C and I need to take the passive cooling off at some stage to check the MSI factory paste. -
MSI P45 Platinum and RAID 0!
System specs below! First of all this system is basically a gaming rig. I am running Vista 64 on one single Western digital hard drive, and using an identical drive for storage. I was thinking about setting up a RAID 0 array with these two drives. Can this be easily done with this mobo? I am just wondering if there are any quirks associated with the MSI P45 Platinum mobo that would make this a pain to set up. Anyone else running a RAID 0 with this mobo and having good results? Would it even be worth it?
I was told my several different people in the gaming community, that RAID 0 really speeds up map loading, which would be great. I would be backing up the array to another internal drive using True Image.
Any advice would be great!!Quote from: Jack t.N. on 20-May-09, 03:16:19
Only, if you set the controller to AHCI Mode (which would not really be a problem either). You probably won't need any additional drivers when the controller is working in IDE Mode.
If you have to install drivers, use the latest ones from the JMicron FTP Download Server:
ftp://driver.jmicron.com.tw/jmb36x/Win2k_xp_Vista/
Ok, well I won't have my new storage drive until Thursday. I will run HD tune on the drive connected to both different controllers and see what is the fastest.
I know we talked about this just a little. Still wondering about the RAID drives, or any drives attached to the ICH10R's SATA connections when it is set to RAID in the bios. The drives, including my SATA CD/RW drive does not show under "Standard CMOS features". Just #7 and #8 of the JMicron's show since they are still set to IDE in the bios.
You commented with:
"They are now Controlled by the ICH10R Firmware. Look here":
--> Integrated Peripherals --> On-Chip ATA Devices --> AHCI Devices Group
--> Integrated Peripherals --> On-Chip ATA Devices -->
Those locations are just where you set the RAID mode. There's no actual drives listed there. I do see a screen popup when booting my system with the two RAID drives saying "ok" and bootable. Plus I see them in the Matrix storage console. Is this normal then? There really is no place when you search through the bios that you can see them listed?? I can hit the Ctrl and I keys and go into the actual RAID bios, but I don't see my RAID drives listed in the actual bios.
Am I explaining this right?? Just wanting to make sure everything is working right. It sure seems to work well with bench marks. Here's a shot of my array with HD tune. I'm thinking that burst rate can't be right. -
Problems Powering up MSI P45 Platinum board --LED3 still flashing
Hello all
I've currently started a new build using the following equipment:
Coolermaster COSMOS 1000
MSI P45 Platinum
Intel Quad Q2600 Processor
1200 MHz patriot 2x1GB Memory
xfx 9800 HD 1GB Graphics Card
power supply Trust switching power supply ATX 400W&P4 :
220 v AC
+3.3v---20A
+12v ---18A
-12v --- 0.5A
+5v ----24A
-5v ---- /
+5v sb ---2A
Wired everything up, connected all the connectors. When I go to power up the system, I get a Red LED 3 but no fans or anything spins up. Switched out for a known good power supply and received the same problem. Not sure where to go from here?
and also i press cmos reset button and nothing happingQuote from: flink on 30-April-09, 13:56:54
i'm sure the hole for the cmos clear button in the i/o shield is the problem. the button is pressed by the i/o shield and your pc won't start.
a well known problem.
I remember reading about this issue before I built my P45 Platinum system. I made sure during the build that the button was not being pressed by the i/o shield. -
Msi p45 platinum cpu voltage problems...?????
my system...
msi p45 platinum:bios(1.4v) intel e7300.... ocz 800 mhz ddr2 ram
his ICQ 4850....
I m changed in bıos voltage but cpu-z dont looking..
1.34v in bios and 1.2v in cpu-z looking....
not nevertime I don"t did...... what you think about this.....
help me pls...
This is a known v1.4 BIOS Bug. It was fixed in BIOS v1.5b1 and in all BETA Releases that followed. If you don't want to flash a BETA Release, you need to wait for the Release of the official/final v1.5 version.
-
Q6600 & MSI P45 Platinum...
hi guys,
my pc specs...
CPU - Quad 6600 @ 2.4Ghz G0 Stepping
MB - MSI P45 Platinum with Zalman Cooler BIOS V 1.5
RAM - 2x2GB Team Extreem Performance DDR2 1066Mhz 5-5-5-15
VGA - Gigabyte 9600GT 1GB DDR3 PCI-E
HDD - WD 640GB SATA
PSU - Silverstone 450W
DVD - Samsung Sata DVD-RW
OS - Vista SP1
** 5 Xigmatex Fans connected to MB sockets (SYS FANS) **
currently i'm running @ 266*9 = 2.4Ghz n my fsb/dram ratio is 1:2. the thing is wen i set my FSB to 400 , fsb/dram ratio is changed to get 1064Mhz for my rams thou, (CPU stil runs @ 400*6=2.4Ghz), i c my NBB Voltage is marked in RED color in d core center software.
the thing is i'm not sure wat is d safe voltage to set it in BIOS to as i'm afraid i might fry d board. PC parts over here are freakin expensive. All settings in BIOS is set to AUTO as i didn't OC my Q6600. Except my ram timings in BIOS is set to 5-5-5-15 (others all auto). so guys, please help me out here. i'm sorry if tis question is lame or a repeat post. i've been checkin around for months but just cant seem to get an asnwer. once again, thanks for all d help guys...If all voltages are set to auto and everything's running without an issue you don't need to change any voltage setting because the auto settings are safe. Forget about core center software as it is quite crappy. What does your HW monitor in bios report for nbb voltage?
-
DDR3 Ram are compatible with MSI P45 Platinum motherboard
hello friends,
I want to ask question about MSI P45 Platinum motherboard. MSI P45 Platinum Motherboard support DDR3 Ram or not.
I am very confuse.Read here for specs P45 Platinum.
http://global.msi.eu/index.php?func=prodmbspec&maincat_no=1&cat2_no=170&cat3_no=&prod_no=1479#menu
5th line from top, DDR2 800/1066/1200.
Like Henry mentioned, the P45D3 Platinum supports DDR3 -
Add a new 4tb hdd to msi p45 platinum ?
I'm planning to add a new 4TB western digital, caviar green HDD's for my msi p45 platinum motherboard ist work will or use 3 tb .
thank youJust some notes regarding large drives on the older chipset boards.
The P45 Plat has
• SATAII controller integrated in ICH10R/JMicron® 363 chipset
- Up to 3Gb/s transfer speed.
- Supports six SATAII ports by ICH10R
- Supports two SATAII ports by JMicron 363, support SATA RAID 0/1/JBOD.
In principle the ICH10R allows amongst Raid capability also the ability(potentially) to handle up to 2TB in AHCI.
What other users with similar boards have however commented on is that they were able to use up to 3TB drives on the JMicron controller, obviously with the latest firmware for that controller and also AHCI. We all know that the JMicron ports are a bit slower than the Intel ports, but that is evident with Asmedia as well.
So when you do test, check both your Intel and JMicron ports and see what they report as the drive capacity in the BIOS. -
Overclocking Q6600 with MSI P45 Platinum
Hi again!
I need some advice regarding my OC settings.
Unfortunately, im an unlucky owner of the infamous Q6600 L8XX batch which has a high VID (1.3250v)
Anyway, I was able to reach 3GHz stable with these settings:
MSI P45 Platinum official v1.5 bios
Motherboard OC Jumper set to: default
================================
C1E: Disabled
Green Power: All Disabled
================================
Multi-Step OC Booster: Mode 1
DOT Control: Disabled
Intel Eist: Disabled
Adjust CPU FSB Frequenxy (MHz): 333
Adjust CPU Frequency: 3000
CPU Multiplier: 9
================================
Advance DRAM Configuration: Manual
Enhanced Settings: Enabled
NB Drive Config: auto
CAS Latency (CL): 5
tRCD: 5
tRP: 5
tRAS: 15
Advanced memory Setting: Disabled
FSB/DRAM ratio: 1:1.2
Adjusted Dram Frequency: 800
================================
ClockGenTuner: No Changes Done
Adjusted PCI Frequency: 37.5
Auto disable DRAM/PCI Frequency: Disabled
================================
CPU Voltage: 1.3175v
CPU GTL REF0: auto
CPU GTL REF1: auto
Dram voltage: 2.100v
DDR_VREF_A: auto
DDR_VREF_B: auto
MCH Voltage: 1.4v
MCH GTL REF: auto
VTT FSB Voltage: 1.35v
ICH Voltage: 1.52v
================================
Spread Spectrum: Disabled
My goal is set at 3GHz and to get a lower cpu voltage (lower than my current 1.3175v), but anything below 1.3175v restarts when i stress test using OCCT. I've run memtest and it's ok. Can anybody advise which voltage I can configure to lower my cpu voltage? Also, is 333 x 9 to achieve 3GHz better? Or should I go with 375 x 8? Thanks! Btw, I plan to maintain these settings for the remainder of my CPU's life.. :Dthanks for the tip. i'm currently logging all my OC settings in an excel file. i just finished played an hour of COD4 without any restarts or instability. currently my settings are just the same except CPU voltage is at 1.344v and i reduced my Dram voltage to 2.0v. running memtest for over an hour, 2 passes already with no errors. i'll stress test it over the weekend.
i have a question though. a lot of people are suggesting a 1:1 FSB/DRAM ratio. but using 333x9 settings @ 1:1, you get 667.. i'm using 2x 2GB GeiL PC6400 800, that's why i used the 1:1.2 FSB/DRAM ratio to get 800. is it ok to keep using the 1:1.2 FSB/DRAM ratio even though people say 1:1 is the ideal ratio? many thanks for the reply -
Msi p45 platinum - freezes after power save turns off displays
Just put this computer together, everything is stock, no overclocking. Seems to run fine, played a few hours of modern warfare 2 with no issues.
I noticed It seems to freeze after the monitor gets turned off by the power save mode. I just tested this by setting it to turn off displays after 1 minute of inactivity, waited watched the monitor turn off, then I went to the move the mouse and the screen came back on but the cursor would not move. sometimes the screen will not even come back on.
I have turned the computer on, left the room while it was booting to eat breakfast or take a shower, came back the screen was still on but the computer was frozen. Window 7 login screen was up, but there were some graphic glitches. this has happened a couple of times.
If I manually put the computer to sleep it seems to come back properly.
msi p45 platinum 1.6 bios, optimized defaults loaded
e5200 intel dual core @2.5 ghz, 200FSB 12.5 multiplier
4 x 1gb ddr2 (800mhz, nanya brand)
nvidia gtx 260 (195.63 drivers x64)
win7 ultimate x64
enermax 720w powersupplyI think it might be the video card or power supply. Was building two systems,
second system has identical motherboard, processor and ram,
galaxy gts 250 instead of the evga gtx 260.
antec 430 earthwatts instead of Enermax EIN720AWT 720W Power Supply
Installed from same OS disc and same set of drivers. Second system seems to operate the powersave mode for the monitor correctly. Will have to do some testing switching videocards tonight. -
MSI P45 Platinum and Scythe Ninja 2
Hi all,
I'm a rookie here and sorry if this question has already been asked but search didn't give solution. I'm planning to buy an MSI P45 Platinum and found Circu-Pipe 2 interesting. They said it leaves enough space for "giant CPU heatsinks". Scythe's Ninja 2 seems to be a giant one... Cause I will purchase them via net, I cannot try them manually in a shop. Does anyone (or friend...) have the same or similar Circu-Pipe-d mainboard with a Ninja 2? Will them work together?
Thanks in advance!
Cheers!Managed to find the following link after doing a search, hope it answer ur queries
http://www.scythe-eu.com/forum/mainboard-compatibility/498-msi-p45-platinum-compatability.html -
MSI P45 PLATINUM with Cooler Master V8
Hi i was wondering if the Cooler Master V8 would fit well with an msi p45 platinum board (mid size tower with q9550 cpu) without hitting the pipes. cus i havt been able to google any images with these two together
any suggestions?!
cheers!The Zalman 9900 would be another good choice to consider. http://s326.photobucket.com/albums/k432/HU16E/P45/
-
Hello,
I am a student Studying in Male', Maldives. Iwould like to know this MSI p45 platinum Motherboard.
If anybody could help it would be really very helpful. So the problem is that the motherboard has a green led 3 red leds showing so i want to know how i can change it to green according to the manual.
LED 12, LED 8, LED 14, LED15 are Red and the LED 10 is green so.. how can i change LEDS 13, 7, 11 to green..
thanks..
XimanQuote from: Ximan on 01-March-11, 18:29:43
Hello,
I am a student Studying in Male', Maldives. Iwould like to know this MSI p45 platinum Motherboard.
If anybody could help it would be really very helpful. So the problem is that the motherboard has a green led 3 red leds showing so i want to know how i can change it to green according to the manual.
LED 12, LED 8, LED 14, LED15 are Red and the LED 10 is green so.. how can i change LEDS 13, 7, 11 to green..
thanks..
Ximan
Most probably same problem as mine, ram no seated properly, I unplug and plug many times, sometimes have to lay the cpu (if it a tower) on its side, then boot up can function.
My problem as follow
https://forum-en.msi.com/index.php?topic=144468.0
Description of LED array status
https://forum-en.msi.com/index.php?topic=123890.0
Nothing to do with LED status but problem related to USB
https://forum-en.msi.com/index.php?topic=123722.0
Maybe you are looking for
-
Trying to sync my iPad and iPhone to a new account without losing all information
Okay here is the situation. I have an iPhone and an iPad all synced to my iTunes's account. My fiancé has as iPhone and our new iMac synced to his iTunes account. I am fully aware that you cannot merge two accounts. We would like to use his as ou
-
Nokia 6700 supported by Nokia Multimedia Transfer
Hello All, Please note that Nokia 6700 device is supported by nokia multimedia Transfer for mac http://europe.nokia.com/support/download-software/nokia-multimedia-transfer/download Download Nokia Multimedia Transfer Connect the device and select PC s
-
Turning iBook pages on the iPad with the apple remote
Something I'd love to see; using any reader; I have my pad on a stand; and Im engrossed in a book; with each page turn I have to lean forward and reach toward the screen; how great it would be to use the remote or an iphone in hand to turn the pages
-
Issue with clearing the Differences in 999 storage type in HU managed S.Loc
Hi Experts, We are trying to writeoff the differences stocks which are there in 999 storage type, but getting an error message 'Quantity difference document line item for HU's' with Message class L6 & Message number 606. Any idea how this can be reso
-
Hello, I am running CiscoWorks 2000 with LMS ver 2.6. How can I run a report that will show me all devices with an uptime of 1 year? Thanks.