About TV CARD and S/PDIF output

I have installed a TV Tuner card on my MEGA180 and when I play TV using the MEDIA center aoftware or the TV tuner card software, the Audio comes out will from Analog output.
Here is the connection sequence
TV cable -> Tuner card -> Tuner card sound out -> 180 built in sound card line-in -> Analog out on the sound card to analog speakers and S/PDIF to home theatre system.
When I record the program and replay, S/PDIF sound works. VCD/DVD play S/PDIF work.
Not when watching liveTV.
How to fix this issue.

Welcome to the forum,
As you will probalby already have found out, the Mega 180 is not "bug free", but you have come to the right place. Browsing this forum will give you many clues about how to solve most of these problems.
Concerning the "no sound" problem:
On the far right of the NVidia Soundstorm Mixer you can select which channel to "forward" to your digital output. Did you try to select "line in" here? Doing this solved my problem of getting no sound during live TV.
JaDi.

Similar Messages

Lots of questions about Sound Cards and DJ'ing

Hello,
I am thinking about purchasing a MacBook. First some background. I play in a wedding/corporate band who occasionally hires a DJ to play in between our sets. Sometime I just bring out my Ipod and plug in to avoid this cost. Most DJ's we use bring out a laptop and just plug directly into our PA. I started looking into laptops so we could cut out The DJ cost all together.
In my research I found that Mac's seem to be the Laptop of choice for most DJ's. My question is about the sound card inside the Macs. Is it a good quality. Would I need to upgrade in order for it to sound good going through a PA system. What are the audio outputs for Macs? As I said before I sometimes just use my Ipod and that sounds pretty good but its hard to search for things etc. And which Macbook do you think I should be looking at. The Pro or the regular?
Thank you for your help.

. Lithium Ion batteries last at peak performance for about 3 years, or 300-500 charges, whatever comes first. They will still work after this for several years, but at reducing performance.
2. Sorry, not sure...
3. Again, not sure. You're taking a risk that the adapter is compatible.
4. Only you can make that decision. Just look at this and the other players and compare the features and price.
5. The in-built microphones are not great quality, and really only good for recording interviews and meetings, that type of thing.

A serious complaint about credit cards and Adobe

ADOBE CASE: 209519450
I have just upgraded to master collection, and this has not been easy nor has it been clear. various people have been involved and none have been able to clear the matter. I was originally quoted a price which turned out to be connected to an "educational offer". One Adobe staff member took my credit card details yet they didnt send any further communication about the order. I am suspicious about this. I managed to get our IT company to circumvent the process and spent in excess of "the quote". I have not been able to log in to the area they suggest to escalate the problem due to it being"unavailable" since October (screen shots available).
I feel that there is something not altogether correct or legal about what is happening here, and am currently discussing with UK Police Fraud Investigation about this, as you simply cannot take credit card details and not respond. Apparently the site has been down since October 16 2012, today is November 9. How am i supposed to respond?
Having been a customer for 2 decades I see how matters are out of control and desperate with Adobe.
I have given you (Adobe) several hours of my time trying to sort this problem and yet there is no resolve as yet. No one called me back (as promised) - probably due to the fact that my contact number was (and has been for years, even after correcting numerous times) WRONG. Indeed, I gave Ranbir (Adobe agent) my correct number several times, but zero response.
I have paid you over the odds, I would like an answer. I am glad that I didnt invest in any of your other "schemes"
I am also intensley annoyed by your lazy, off hand customer services department.
regards
AS

HI Bing
Firstly, what a relief to have an understanding mail/response regarding this, thank you.
OK, the main point lies with the order on 10/16/2012, which was verbally placed (credit card details etc) and we were given the (again verbal) delivery date of "2 days" which wasn't confirmed by email. It became impossible to have this situation understood, and also worrying that we'd handed over details like that in good faith to Adobe.This phone conversation took place on the morning of the 5th November with a view to completing all the upgrades on the Friday due to work schedules.
As we could not get a response from anyone within Adobe, I was forced to purchase "on the day" in order that we didn't suffer major interruptions to our work. We contacted the UK distributor (CU), and explained this situation and they could only agree to selling to us at retail price, which we had to do, thus incurring courier costs as well as the huge amounts of telephone time - unproductive. Repeating time after time the same things, and being promised a "call back". I established a relationship with one operator who managed to inform me to send in my receipts to consider "some kind of compensation". These i have submitted 3 times now.
Thats whats happened in a nutshell, and it really hasn't been anything near a good experience, I am sad to say. I now have a fully paid upgrade CS6 Master Collection, but at a considerably higher price (in more ways) than i expected, and the concern over credit card information is a huge worry!
The addresses and contact information etc problem, has been a persistent, decade long, "repeating exercise" which, hopefully now will be resolved , as everytime our company has to upgrade, its a real chore - which it shouldn't be. You probably have seen all our Photoshop licenses, and see how far back our history goes.
I have to say, I felt completely defeated and negative about the whole experience, and seriously welcome a simple discussion/resolve to it
thanks for listening
(Still an Adobe customer.. just)
regards
Andrew Sutton

Question about graphics card and motherboard

My laptop is a dv6500 CTO. I have the geforce 8400M GS video/graphics card in my laptop. Recently I was playing a game and my computer locked up. I restarted my computer and had a message from Windows 7 saying my graphics card stopped working. I than checked my device manager and it said the card was working properly. Well now it dies if I am watching a video, playing any game it lasts for about 5 mins.
I than went to the device manager and disable my card. Before my card was disabled, I was still able to loud windows fine. This is where I have my biggest question. If I disable my card, than why is it that I can still use my computer? Does the motherboard have a small chipset for video besides the graphics card? Is this graphics card welded on the motherboard or can I replace it?
I always thought on laptops the graphics card was part of the motherboard and if it went out than my screen would go out and that would be the end of it. Is that not true? Thanks for the help.

Here are the specs for your HP Pavilion p6-2371ea Desktop Computer. According to the specs, this model shipped with Windows 8 and a 300 watt power supply. To use the GTX 650 Ti you will need to upgrade the power supply to a 500 watt or 600 watt unit. The Corsair CX500 and CX600 are known to fir most HP comsumer desktop computer cases and come highly recommended. The next thing you need to do is DISABLE "Secure Boot" and ENABLE "Legacy Support" in the BIOS. Doing these things should resolve your issue.
See THIS similar HP forum thread for conformation of your issue.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Question about video cards and render times

I would like to know if having a REAL video card (not a GeForce with a measly 64 megs of RAM), would help with the rendering times in iDVD? I prefer to use the High Quality settings, so rendering is taking a very long time. Would a card with more video RAM help this along any faster? Thanks in advance.

I would be surprised, if the grafic card (=display) is involved in the process of encoding a videoDVD... (???) this a computational task =>CPU, main system...
factors for encoding speed are:
* CPU (G3/4/5/dual/quad/Intel)
* RAM (… as much as your wallet allows...)
* speed of harddrive..
* other tasks... best practise: let encoding the only main task...
* lots of free space on internal drive (iDVD needs at last 10 - 15GB free); trying to create a videoDVD with letssay 3GB free adds hours of encoding time
helpful?

HT2534 But in my iPhone they ask about credit card and there no none between the choses

....

You are creating a new account and following the instructions exactly ? i.e. selecting a free app in the store and creating an account when 'buying' it.

Line connection between PCI-6527 card and instrument

Sorry for my foolish. My poor electronic knowledge prevent me from fully understanding what you explained in your last reply and need more help.
In fact, we plan to control two instrument switchs, one is for the Magnetic_Suspension_Control(MSC) , another is for control the Weight-changing-Device(WCD).
The instrument manufacturer provide a cable for the MSC and WCD. The cable looks as follows: there is one connection to the computer(25-pin subD-plug) of which two cables lead away, one to the MSC(6-pin Lemosa)and the other to the WCD(15-pin subD-plug).
The interface of the MSC is internally realized by using only two simple optocouples(OC). Their input-pins are connected directly to the 25-pin SubD-plug of
cable as follwing:
25-pol.SubD; meaning
Pin 9 anode of OC1-LED
Pin 7 anode of OC2-LED
Pin 23 cathode of OC-LED
Pin 18 cathode of OC-LED
Because of the optocouplers draw some current from the NI-card, the manufacturer let me make sure that the NI-card can source circa 7mA(better 10mA) on each pin.
The interface of the WCD consists of three simple TTL-level inputs, which are also directly connected to the 25-pin SubD-plug of our cable as following:
25-pol.SubD; meaning
Pin 4 TTL-Input (remote) (0-1V/3.5-5V)
Pin 3 TTL-Input (weight 1) (0-1V/3.5-5V)
Pin 2 TTL-Input (weight 2)(0-1V/3.5-5V)
Pin 5 common ground
The current drawn by the TTL-inputs is not worth mentioning.
By controling the logic state of these above pin states through labview, I then can control the instrument switch.
Based on above information, how should I choose right resistor for achieving the suitable v
oltage and current on each pin and How should I connect line between PCI-6527 card and 25-pin sub-D plug(I plan to use port 3 of PCI-6527 card).
Thanks, your help is greatly appreciately
zhou

Zhou,
My best recommendation is that you find someone who can give you a better and more direct advise in electronic circuiting. We don't have in our hands the manual of your instrument in order to clarify what it needs and where, although you gave some pin numbers we cannot take the risk of advising something that we don't have the absolute knowledge of. We can give you all the details you want about our card and what does it gives, but you have to decide how are you going to connect it to your instrument. If you recall your email about the manual, in fig. 3-6 page 3-12 you can see a picture of how to connect a TTL driven device, in the last email we gave you an option of how to connect the resistor and where, please read it again, basically I am going to repeat the same, we feel sorry about not been able to give you more help, but is opt to you to find help in electronic theory. Remember in my last email that I told you the 3 cases in which your instrument may need either voltage, current or both, and I told you how RL will change and what new resistors you may need to connect. Review that and make tests with your switch, your question about how to choose the right resistor is answered in the previous email and how to connect lines between the board and the cable of your instrument you have both pin outs... match them... the person who has in his hands the manual and the instrument is the best person to choose how to interfase both appliances... we are sorry Zhou but if we advise you about pin connections of your device with our blindness we have of your device we may make a mistake, we told you about our pins and how to choose resistors.
If you need more direct assistance on this Zhou you may better try to call us, by text messaging is limited and this requires direct guidance. If you decide to call us you can find instructions at www.ni.com/ask hope you move forward in your application as soon as possible.
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Help:java card and rfid

I searched a lot about java card and rfid, but don't have a clear idea about the relationship between the two. Please help me....

They have NO common grounds.
A java card needs a real "smart" processor because it contains a Java Virtual Machine, can do crypto and other stuff. The cost to produce one is in the multi dollar range. Some java cards can communicate contactless by "radio".
RFID is the term to describe a very primitive device, all it can do is report a unique identification (ID) and it does this contactless (RF). the cost to produce one is in the cent range. You can use it to track products or containers or other stuff.
Since RFID is also a very popular buzzword these days, the exact meaning of RFID varies.
Of course, you could use a java card to play RFID tag, but that would be
very expensive. Java cards are usually used for bank cards and similar applications.

HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918

TS1292 I have recently received an iTunes card and after scraping away the panel to get my code the first part of the code is unreadable how do I go about getting a code for the card

Hi there I have recently been given an iTunes card as a present.i went to use it today to put credit on my account and after scraping away the panel found that I couldn't read part of the code that was on the card how do I go about getting the card activated?

If the page that you postted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Need a recommendation about java smart card and a reader

I've been posting some message in this forum and others and haven't gotten a clear response.
I want to experiment with java smart card technology.
From what I gathered, Gemplus is a leading company in this field so I thought about buying a smart card reader from it and a java smart card.
I thought about buying the "USB Smart Card Reader/Writer Plug n Play (GemPC430)" reader which costs 69$.
Is this a reasonable price?
I need an answer from someone with experience using it.
Now then, which one should I buy?
I only want to do smart card to desktop application interaction without anything on the web (e-commerce or anything to do with encryption).
I can buy 5 "GS2.2 Standard Crypto GPK8000su512 RED"
cards which cost 87.50$
THATS A LOT OF MONEY!!!!
Are all java smart cards that expensive?
There is a list of other cards on their site but I haven't been able to locate their price and don't know which to buy.
Finally, there is the "Kit, GemSAFE Enterprise Workstation 2.21 Standard Cryptography Serial Port Reader" which as I read consists a GPK8000 card.
Is this card a java card?
Or do I need to buy the reader and java card seperately.
Any help and insight would be greatly appreciated.
Thanks.

I've looked closely at the Cyberflex 32K cards + SDK from Schlumberger.
My criteria was:
* Javacard 2.1 support
* visa open support (or whatever it is called now)
* complete sdk (develop, test, deploy)
* exportable
* upgradable
* customer support
I tried to get someone from Gemplus to contact me, but was unable to ever get even an
email response.
Schlumberger, on the other hand, won me over with the quick responses over email.
They offer fairly inexpensive upgrades after you buy the product, and technical support
is free.
For simple experimentation, you can get the JavaCard SDK for free. At JavaOne, several
years ago, they were giving away JavaRings with Card Readers (which presumably
means these are cheap to buy) from SCM or some company in Texas. You might
try to get one of these. They don't have much memory, but are an interesting twist
on the Java Card thing.
If you want to dive in, the Smart Card SDK from Schlumberger will run you about $499.
This includes the reader, 5 cards, and the SDK. Likewise, Metrowerks puts out an
IDE for Java Card which runs about $1200, and may be available as a bundle from
vendors like Schlumberger.
dk

HT1918 I have been using the same credit card for about a year and now it's telling me my security code don't match so it won't let me buy anything.... Any ideas

I have been using the same credit card for about a year and now it's telling me my security code don't match so it won't let me buy anything.... Any ideas

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Apple took money out of my account. I had to change debit cards, and they won't get another one so is there anything I can do about this problem. I rather cancel the phone before I have to worry with my bank accoung.

Apple took money out of my account. I canceled my charge card and will not give them another one. Is there anything else I can do? I will cancel my account before I worry with my bank acount all the time. Now I can't even sign in for free apps

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.

Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.

Hello Hellraiser24,
This question has actually been discussed in another thread here:
http://forums.ni.com/ni/board/message?board.id=170&message.id=95895&requireLogin=False
I hope this helps,
E.Lee
Eric
DE For Life!

I was so excited about apple pay and now setting it up hoping to replace a wallet within next year or so and then boom 8 cards you are done! Come on Apple 8 cards is that what you call wallet replacement?

I was so excited about apple pay and now setting it up and boom 8 cards and you are done is that the wallet replacement they thought they'll do? really? I mean most people have 10-15 cards at least and I am, well because of my side business I have lots so 8 is nothing to me!

Not sure what you are saying. I was able to very quickly set up my AmEx card - no problems at all. For my PNC and Macy's cards, companies still working on being ApplePay-ready.
It will happen, just not as fast as we might like, but I think it is going to be fabulous.

About TV CARD and S/PDIF output

Similar Messages

Maybe you are looking for