About user exit
Hi Gurus,
I have one query.I want to do the validation for the field SORT2 in XD01,XD02 for that I am using exit EXIT_SAPMF02D_001
& BADI CUSTOMER_ADD_DATA but its not working properly as in import parameter of FM structures don't have SORT2 field ? can anybody suggest any BADI or some other user exit ?
Thanks,
Sachin.
Moderator message: please use more descriptive subject lines from now on.
Edited by: Thomas Zloch on Sep 24, 2010 9:27 AM
Hi,
you can't find the field SORT2 in the exit EXIT_SAPMF02D_001 & BADI CUSTOMER_ADD_DATA , because these exits are not correct for your issue.
SORT2 is a field of the table ADRP of the Central Address Management.
The address validation routines are the following:
Enhancements:
SZRS0003 Address check - Interface to external providers
BAdIs:
ADDRESS_CHECK Business Address Services
but I cannot see the right one that fits your issue.
In my opinion a [field exit|http://wiki.sdn.sap.com/wiki/display/ABAP/Field+exits] on the Field/Data Elemnt SORT2 could be a good chance.
Regards,
Andrea
Similar Messages
-
Where can I get more information about User exits?
Where can I get more information about user exits,their related Tables and the source code of an User exit?
Thankswould you please give the Internet addresses of these places?
Mostly I want to get the source of some user exits in Oracle Application.
If you know how and where can I get these sources,I'll appriciate if you let me know.
Regards -
Want to know about User exit in detail
Hi ALL,
I M NEW TO sap ABAP. I WANT TO KNOW ABOUT USER EXIT IN DETAIL. PLS DO THE NEEDFUL . If there are eny document regarding this pls mail to this id [email protected]
thanks and regards
NandhaHi Nanda,
Welcome to SDN,
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
User exits are used when the flow for a particular transaction has to take some other route other then the normal flow. this can be the case when you have to attach some additional functionality lik u need a customised screen, or new functionality (using a functional module). based on these things user exits can be classified as screen exits, function module exits, field exits( not used anymore). hope this gives some help on userexits.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
For More information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm -
Urgent. Need to know about user exits.
Hello Everyone,
I am new to this forum. I need to know about user exits.
My next project requires me to implement user exits, screen exits, etc.
I am a rookie to this topic.
Can anyone help me as to how to start with his topic.
Any sort of help is appreciated.
Cheers,
Neelam.Hi Neelam,
Welcome to sdn.
This is a very frequently asked topic.
Please use teh search forum option for this type of queries.
http://help.sap.com/saphelp_47x200/helpdata/en/c8/19763443b111d1896f0000e8322d00/frameset.htm
Regards,
Ravi -
Hi experts i would like to know about user exit variables?
Hi there experts,
sorry for being pain, can some one give me an idea about what are user exit variables and where are they used ?cheers thanks.Hi,
1)for example user when ever executes his report he wants only for current date by default
then u create the user exit variable on 0calday example as 'zcedate'
then go to the tcode CMOD here create the project then go to the Exit_saplrrso_001
here u can insert the code like as below
when 'zcedate'.
clear l_s_range.
l_s_range-sign = 'i'.
l_s_range-option = 'eq'.(if it is between two dates then l_s_range-option = 'bt')
l_s_range-low = sy-datum(if it is range l_s_range-low = 'may be any date or by using sy-datum - )
append l_s_range to e_t_range.
like this we can start and write for month to date and week to date by using the FM week_get_first_day and dat_get week
and for year to date by using the FM first_and_last_day_in_year_get
if u have any detailed pls ince again tell me which are things u required.
thanks for giving this oppourtinity.
Thanks & Regards,
k.sathish -
Urgent ( Case about USER EXIT)
I need to place a Botton in CN20J (Project Builder).
How can I proceed,
Can there are User Exit for this ,
If It is there Plz Try to Add a button to aopen an URL,
I got aprocedure for URL.
I need to place a button............
If possible Plz send the Code to write it. or Steps to Proceed.....There are enhancements CNEX0006 PS customer specific fields project definition and CNEX0007 for WBS, these enhancement contain sub-screens for specific/customer fields.
You could use this enhancement to
- Put the button in sub-screen to display your URL
or
- Intercept the function-key "+CUD" to display your URL, then you have to "by-pass" the subscreen (or best, display the url in the sub-screen)
Regards -
Hi frnds.
For long time i have been searching for user exits for following txns. If any body have some idea i will appreciate it a lot.
1.ME01(MAINTAIN SOURCE LIST)
2.ME11(CREATE INFO RECORD)
3.MB01(GR for PO)
4.ME31(CREATE ONLINE AGREEMENT)
5.ME51(CREATE PURCHASE REQUISITION)
Waiting for your replies.
Regards,
ArpitHi Arpit,
You can use following code to find user-exits in any SAP standard transactions...
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Regards,
Sriram -
Hai SAP Experts
I want know the full details of USER EXIT,Use of user exit, where it can find and it where it will assigned to get our requirements
Including Basic, Can anyone explain inthis regards please
Note : I am the functional consultant
Thank UHi,
I guess it would be very hard for anyone to provide you with full details of user exit, as its a very open ended qns. Anyways just a few things, a user exist is a enhancement to SAP std program where-in you can add-in your custom logic to enhance the program to meet your specific needs. There are loads of user exits, so to check the one which meets your need, go to SMOD, click F4 & you should find SAP applications, click on that & then branch into the one which meets your specific need.
Now once you know which exit to use, go to CMOD & you need to create a project for this User-exit & activate the implementation. This is done by the technical person, so from your end, you would need to specify the logic which you would need.
Hope the above was of some help.
Regards,
Vivek -
A question about User Exits(EXIT_SAPLRRS0_001)
Hi,
i have a question about EXIT_SAPLRRS0_001.
In this case i want to get a start date of the quarter(Z0DD1) during 2 variables (year 'ZAYEAR1' and quarter 'ZAQTR1'), which are given in a POP-UP Dialog. The following codes:
CASE i_vnam.
WHEN 'ZODD1'.
IF i_step EQ '2'.
CLEAR: l_s_range.
READ TABLE I_T_VAR_RANGE INTO i_s_var_range WITH KEY vnam = 'ZAYEAR1'.
IF sy-subrc EQ 0.
l_var_year = i_s_var_range-low.
ENDIF.
READ TABLE I_T_VAR_RANGE INTO i_s_var_range WITH KEY vnam = 'ZAQTR1'.
IF sy-subrc EQ 0.
l_var_quarter = i_s_var_range-low.
ENDIF.
*==================start date of the quarter===============
CALL FUNCTION 'Z_0000_QUARTER_S'
EXPORTING
VA_APPLE_QUARTER = l_var_quarter
VA_APPLE_YEAR = l_var_year
IMPORTING
VA_APPLE_QUARTER_S = l_var_quarter_s.
clear l_s_range.
l_s_range-low = l_var_quarter_s.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDCASE.
Please help me to check if this program is right?
I have made a debugging, but i do not understand, why this program runs 3 time with I_STEP from 0 to 3. In fact I need only the data with I_STEP = 2.
Addtionally i want to know if the tabel e_t_range will provide the returned value (ZODD1) ?
THANKS A LOT.THanks your replies!
I would like to know if the e_t_range provides the returned value (In this program i want to get the value of ZODD1)?
IF yes, in I_STEP = 2 e_t_range save the right value for ZODD1. But this program run one time again--- I_STEP=3, at this time e_t_range hat not any value, that means if i will not get the value for ZODD1?
THANKS. -
ABAP Objects available in a USER-EXIT
Dear Sir,
I am very new to ABAP / User-Exit . To learn about User-Exit , I was refereing one tutorial related to USER-EXIT implementation in VL01 (form userexit_save_document_prepare) .
Sir , in this sample User-Exit , author is referring ABAP Objects like : xlips-lgort / xlips-matnr etc .
Sir , my query is that how can we know that which objects are available which can be used in a User-EXIT . How a new user like me will come to know that object xlips-lgort can be used in this User-Exit .
Pl help me .
Regards
B MittalHi,
A user exit is similar to an function module. The difference is you can write your own piece of code in a user exit to fulfill your requirements. If you look into the IMPORT parameters of the User Exit all these variable in the IMPORT are inputs to your exit. All the variables in the EXPORT parameters are the ones that can be sent out of the exit. You can change all the variables that are present in bothe IMPORT and EXPORT parameters. Ex: If i have V_data in IMPORT as well as EXPORT then i can change the value of V_DATA from 1 to 2 and pass it to next step in the standard program.
Also you have TABLES in user exit. These can be inputs and output parameters. For example i can enter a few records in the tables parameter IT_TAB in one of the exits and change these records inside the USer Exit include and export the same to the next step in the standard transaction.
Hope this is helpful.... reward if useful.
Thanks,
Anil
Edited by: Anil Japa on Mar 20, 2008 9:27 AM -
User Exit for Trans. V_RA - urgent
Hai All
I would like to know if there are any user exit available for transaction V_RA. I am yet to recv. the exact reqmt (logic) from functional. Can any one help me out.
Thanks in advance
VisuHi,
create one report program of your own, paste the below code, execute the report in selection screen you can give the Tcode and execute, it will display the list, which is having interactive facility, which will guide you about user exits related to that Tcode.
COPY FROM HERE
tables: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
FORM get_data *
form get_data.
select single * from tstc
where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = tadir-devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
endform.
FORM write_list *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
endform.
END COPY
Reward if useful,
Thanks,
Sreeram. -
Need help in finding tcode - in user exits
hi experts
in user exits, i can find many exits name using <b>SPRO </b>or <b>SMOD</b>. and by this i can find the package also.
my question is how to know where these exits are exactly used, ie., in which transaction these exits are used.
is there any way to find out the tcode, if we know exit name.
thanks
akilaHi
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward points for useful Answers -
Hi i want to become storng in user exit and bapi
hi experts.,
i want to become strong in the area of user exits and badi's .
please send me the documents for it ,
Thanks in advance.
Regards,
HituHi Hitu,
Check these links..
<u><b>Badi</b></u>http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
<u><b>User-Exits</b></u>
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Regards,
Younus
<b>Reward Helpful Answers:-)</b> -
i am extending my question on other topic..
now badi's or user exits.. or both...
thanks..
rajHi
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
<b>Reward points for useful Answers</b>
Regards
Anji -
User Exit for F-92 transaction!
Hi everyone,
I hope you all fine!
I hope you guys could help me with this. This is about user exit, I need one for the transaction F-92, when the user wants to sale a fixed asset I need to catch the fixed asset number to validate it, but I don't know if I'm doing something wrong with this user exits that I found here in the forum none of them stops when a type a break-point sentence.
SAPLF051 Workflow for FI (pre-capture, release for payment)
RFKORIEX Automatic correspondence
RFEPOS00 Line item display: Checking of selection conditions
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
FEDI0001 Function Exits for EDI in FI
FARC0002 Additional Checks for Archiving MM Vendor Master Data
F180A001 Balance Sheet Adjustment
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
Does any body know if there's any more user exit that are not listed in here for this transaction? or in the user exit listed above there's one that could stop at the break-point. but I'm not doing it correctly!
I hope you guys could help me with this, I'll really appreciate it.
Thanks for your time.
Regards,
Guillermo E.Hi Vinod,
Thanks for your reply, I also tried as you told me to use the transaction OB28, but I'm having some problems to understand how to use it. I found this documentation to create a user exit, here is the link:
http://www.richard-harper.me.uk/Kb/showtext.aspx?id=0007c
I followed the steps that it says, but the functional consultant can't see the new user exit that I'm trying to use.
I hope somebody could help me to understand how to set up a user exit with the transaction GCX2, and how to set parameters to make to make a query to a custom table and return a value to trigger the validation.
Or if I'm supposed to use another way to do it.
Thanks for your time!
Regards,
Guillermo
Maybe you are looking for
-
Erro na geração da NFe - Devolução de Transferência em Trânsito
Bom dia a todos. Estou tentando fazer o cenário de devolução de transferência entre filiais quando o produto ainda estiver em trânsito. Utilizei como referência para todas as etapas o documento encontrado aqui no próprio fórum Stock Transfer Order (S
-
Error when importing a web service from ES Workplace to NWDS
Hi guys, I'm working with SAP NetWeaver Developer Studio (SAP NetWeaver 7.1 Composition Environment SP03 PAT0000 Build id: 200710302120) The connection (through Services Registry) to the ES Workplace was successful. I found the service definition and
-
Embedded font errors after migrating pdfs to new web server
Hi All, After hundreds of working pdfs were moved to new web server, they produce variations of the "cannot extract the embedded font" (name of font) "some characters may not display or print correctly" error. The first page loads perfectly and the r
-
Hello! I started to use Ubuntu OS some time ago and Im wondering if there is a proper version of Toshiba Assist driver for Linux. I looked for it but neither the browser on the drivers' download page nor I can't find it ;| What I want is i.e. the FN
-
Hi, Could someone please upconvert these 5.1 VIs to 2010, please? Thank you! Solved! Go to Solution. Attachments: Powspec.vi 81 KB Integrl2.vi 26 KB 1Wanova.vi 43 KB