About Version compatibility and Forms Migration

Hello,
Like to know ...
1> whether i can use Forms 10g/Reports 10g with Oracle 9i rel.2
2> will there be any problem with any application.i want to migrate my application in Forms 6i to Forms 10g.My application was running in client-server mode with no web related features. any good doc on migrating from forms 6i to Forms10g.
regards,
Sidhant

Hi there
Firstly read this link:
http://www.irf-dv.de/oracle_produkte/info/f9i_obs.pdf
title: Oracle forms:Features Obsolescence fo Release 9i.
This will give you an idea of potential problem ereas in your application.
Form 10G comes with a migration assistance that can be run in GUI mode or batch mode (command prompt) the executable is called ifplsqlconv90.bat. Your 10G forms help will give you loads of info on both modes.
Oracle have also has an "Oracle forms Upgrade Center", which can be found at:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html. there are some demos(including for ), config hints etc
All the best
Q

Similar Messages

I have a Pc with win vista. i have safari 5.1.7 installed. i want to know if there is an upgrade for safari. i heard about version 6 and 7.

I have a Pc with windows vista. I have safari 5.1.7 installed. I want to know if there is an upgrade for safari. I heard about version 6 and 7.

Since Safari for Windows is a little old now. some things may no longer display properly if the website creator moves to newer technologies not supported on older browsers. You are likely to see this in more and more sites as they update themselves.
I suggest using a more modern browser.

Still about domain alias and domain migration

Our company is under a domain name transition. Currently, our domain is lab.D.com, and we are moving to aaa.com.During the transition, we wish both domains could work for us for a long time.
I added a domain alias aaa.com for our domain lab.D.com, the ldif shows:
dn: dc=aaa, dc=com, o=internet
objectclass: alias
objectclass: inetDomainAlias
aliasedObjectName: dc=lab, dc=D, dc=com, o=internet
dc: aaa
after restarting msg server, I can send email to [email protected] which is acutually [email protected]
However, this is only half-way to my goal. I wish our emails at receivers' mailboxes were [email protected], not [email protected], if we send emails though loging in web mail typing [email protected] in the user ID box, or by creating [email protected] accounts in MS Outlook.
===> Is there any way to do it?
===> can [email protected] account be created in MS Outlook?
In another post about domain migration, you suggested:
If you want to stop using the old domain, and make the new domain your "default domain", that's a little harder. It involves several steps:
1. changing all the mail addresses.
2. changing the "default domain" settings everywhere.
===> I wonder, how to do it? is there any command? ldapmodify?
as an alternative approach, if we decide to change our email addresses to [email protected] first,
===> will emails sending to either [email protected] or [email protected] arrive at users who are still in the lab.D.com, if I only change all the mail addresses' domian part to aaa.com since I have added domain alias aaa.com?
and, I do not think sending emails from [email protected] to the internet would be a problem, right???
The iMS we use is iPlanet Messaging Server 5.2 (built Feb 21 2002), Directory Server is 4.16 which are very old versions :(
Thanks.

I make no claim to be a programmer, nor am I expert
with ldap commands.
I know of no easy way to change all, other than
export to ldif, and use a global change with a text
editor, and then re-import.So, db2ldif -> change in text editor -> ldif2db, right?
Another question here is about Direct LDAP.
I enabled Direct LDAP.
aaa.com is the domain alias to lab.oldD.com (our old domain).
I also have changed user alas' email addresss from alas@ lab.oldD.com to [email protected] and added mailAlternateaddress for alas as [email protected], as you instructed in previous posts.
However, whenever I click "send" either to aaa.com or lab.oldD.com, it shows errors, for examples, - "Returning unknown or illegal alias: [email protected]", "Returning unknown or illegal alias: [email protected]"
The log shows:
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "user@[127.0.0.1]" 0x00000000
19:17:27.62: Right default: honey.lab.oldD.com
19:17:27.62: Parsing address with null fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "$*", literal = "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
// honey is our email server
19:17:27.62: Rewrite failed, not forward.
19:17:27.62: Rewrite: "$*", position 1, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "$*", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.0.0.1]", literal = "", tag = ""
19:17:27.62: Rewrite: "[127.0.0.1]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.0.0.1]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.0.0.1]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.0.0.]", literal = "1", tag = ""
19:17:27.62: Rewrite: "[127.0.0.*]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.0.0.]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.0.0.]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.0.]", literal = "0.1", tag = ""
19:17:27.62: Rewrite: "[127.0.*.*]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.0.]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.0.]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[127.]", literal = "0.0.1", tag = ""
19:17:27.62: Rewrite: "[127.*.*.*]", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: "[127.]", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "[127.]", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "user", host = "[127.0.0.1]", domain = "[]", literal = "127.0.0.1", tag = ""
19:17:27.62: Rewrite: "[]", position 0, hash table -
19:17:27.62: Found: "$E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon"
19:17:27.62: Mapping: name = "INTERNAL_IP", input = "127.0.0.1".
19:17:27.62: Mapping 2 applied to 127.0.0.1
19:17:27.62: Entry #2 matched, pattern "127.0.0.1", template "$Y", match #0.
19:17:27.62: New target ""
19:17:27.62: Exiting...
19:17:27.62: Final result ""
19:17:27.62: Mapping result:
19:17:27.62: New mailbox: "user".
19:17:27.62: New host: "[127.0.0.1]".
19:17:27.62: New route: "tcp_intranet-daemon".
19:17:27.62: New channel system: "tcp_intranet-daemon".
19:17:27.62: Looking up host "tcp_intranet-daemon".
19:17:27.62: - found on channel tcp_intranet
19:17:27.62: mmc_winit('tcp_intranet','[email protected]','') called.
19:17:27.62: mmc_determine_url beginning with pattern , xadr , mbox , subaddress
19:17:27.62: Queue area size 18871794, temp area size 18871794
19:17:27.62: 4717948 blocks of effective free queue space available; setting d
isk limit accordingly.
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "[email protected]" 0x00000000
19:17:27.62: Right default: lab.oldD.com
19:17:27.62: Parsing address with local fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "alas", host = "newD.com", domain = "$*", literal
= "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
19:17:27.62: Rewrite failed, not forward.
19:17:27.62: Rewrite: "$*", position 1, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "$*", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = "newD.com", litera
l = "", tag = ""
19:17:27.62: Rewrite: "newD.com", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "newD.com", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = ".com", literal =
"", tag = ""
19:17:27.62: Rewrite: "*.com", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: ".com", position 0, hash table -
19:17:27.62: Found: "$U%$H$D@TCP-DAEMON"
19:17:27.62: New mailbox: "alas".
19:17:27.62: New host: "newD.com".
19:17:27.62: New route: "TCP-DAEMON".
19:17:27.62: New channel system: "TCP-DAEMON".
19:17:27.62: Looking up host "TCP-DAEMON".
19:17:27.62: - found on channel tcp_local
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "[email protected]" 0x00000000
19:17:27.62: Right default: lab.oldD.com
19:17:27.62: Parsing address with null fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "alas", host = "newD.com", domain = "$*", literal
= "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
19:17:27.62: Rewrite failed, not forward.
19:17:27.62: Rewrite: "$*", position 1, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "$*", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = "newD.com", litera
l = "", tag = ""
19:17:27.62: Rewrite: "newD.com", position 0, hash table -
19:17:27.62: Failed.
19:17:27.62: Rewrite: "newD.com", position 0, rewrite database -
19:17:27.62: Failed
19:17:27.62: Rewriting: Mbox = "alas", host = "newD", domain = ".com", literal =
"", tag = ""
19:17:27.62: Rewrite: "*.com", position 0, hash table -
19:17:27.62: Failed
19:17:27.62: Rewrite: ".com", position 0, hash table -
19:17:27.62: Found: "$U%$H$D@TCP-DAEMON"
19:17:27.62: New mailbox: "alas".
19:17:27.62: New host: "newD.com".
19:17:27.62: New route: "TCP-DAEMON".
19:17:27.62: New channel system: "TCP-DAEMON".
19:17:27.62: Looking up host "TCP-DAEMON".
19:17:27.62: - found on channel tcp_local
19:17:27.62: Mapped return address: [email protected]
19:17:27.62: mmc_rrply: Return detailed status information.
19:17:27.62: mmc_rrply: Returning return address and channel OK
19:17:27.62: mmc_wadr(0x001abd40,'','[email protected]') called.
19:17:27.62: Copy estimate before address addition is 1
19:17:27.62: Parsing address [email protected]
19:17:27.62: mmc_address_to_tree: Parsing address.
19:17:27.62: Address: "[email protected]" 0x00000000
19:17:27.62: Right default: lab.oldD.com
19:17:27.62: Parsing address with local fixup.
19:17:27.62: mmc_address_to_tree: Returning.
19:17:27.62: Rewriting: Mbox = "alas", host = "lab.oldD.com", domain = "$*", l
iteral = "", tag = ""
19:17:27.62: Rewrite: "$*", position 0, hash table -
19:17:27.62: Found: "$E$F$U%[email protected]"
19:17:27.62: Match, pattern = "lab.oldD.com", current = "(*domaincheck*)"
19:17:27.62: old state = not checked.
19:17:27.62: Performing domainMap check on lab.oldD.com.
19:17:27.62: Added domainMap result 1 to cache for lab.oldD.com.
19:17:27.62: new state = succeeded.
19:17:27.62: New mailbox: "alas".
19:17:27.62: New host: "lab.oldD.com".
19:17:27.62: New route: "honey.lab.oldD.com".
19:17:27.62: New channel system: "honey.lab.oldD.com".
19:17:27.62: Looking up host "honey.lab.oldD.com".
19:17:27.62: - found on channel l
19:17:27.62: Routelocal flag set; scanning for % and !
19:17:27.62: Address [email protected] requires local processing.
19:17:27.62: Variant #1 = [email protected]
19:17:27.62: Variant #2 = *@lab.oldD.com
19:17:27.62: Checking for [email protected] in the system alias file
19:17:27.62: - not found
19:17:27.62: Checking for *@lab.oldD.com in the system alias file
19:17:27.62: - not found
19:17:27.62: - adding address [email protected] to headers.
19:17:27.62: Copy estimate after address addition is 1
19:17:27.63: mmc_rrply: Return detailed status information.
19:17:27.63: mmc_rrply: Returning unknown or illegal alias: [email protected]
I wonder why?
Thanks.

Info about oracle 7 and forms

I need manual or info about forms. I use a forms with oracle 7
over AIX.
thank in advance
gabriel

Are you after any specific info releated to Forms and/or Oracle
7?
sandeep

WRT-300N - Worries about future compatibility and current network support

Is there a way that this new router can 'trick' networking software ( Network Magic et. al. ) into running with this router.
Seems that the Network Tools vendors are all gloom and doom about them
because the standard is likely to change in 2008.
This means to us that upgraded to the 300N that we can use anyones networking tools because they refuse to support them.
Is this 2008 gloom and doom scenario true ?
Did I make a big mistake and will need a new router in 2008 when released standard cards try to work with this router.
I really really miss my home network !!
Steve

The highest I acheive is 270 and sometimes it does drop. I had a lot of tweaking to do especially with the antennas.

Oracle developer 4.5 (reports and forms ) upgrade

is there any one have a patchset to update developer suite 4.5?

is there any one have a patchset to update developer suite 4.5? What version are you wanting to upgrade too or are you just looking for the "latest" patchset for Forms 4.5?
If you are looking for a patch that will upgrade your Forms 4.5 to the latest version of Forms, there isn't one. You just install the latest version of Forms and you migrate your Forms 4.5 forms to this version using the Forms Migration utility.
If you are looking for the latest patchset for Forms 4.5, then you will need a support contract with Oracle Support in order to obtain product patchsets. However, I am pretty sure patchsets for Forms 4.5 are no longer available even if you have a support contract. Forms 4.5 is very old!
Craig...

RoboHelp Version Compatibility

Hello everybody from Greece,
I want to ask about version compatibility. I've got RoboHelp
HTML 5.0.2 and my client has RoboHelp HTML 3.1. He asks if I can
compile his project, but I wnt to know if he will be able to work
with the project that I will work with in version 5.0.2.
Is there a way to save the project to an older version?
Is there a compatibility problem in general?
Is there going to be a problem if I compile the project in
the newer version? (Will he see any differences?)
Any help would be appreciated.
Thanks in advance.

Hi Tansou and υποδοχή,
You should be able to open up the X3.1 in X5.02 without a
problem. X5 will preserve all the feature used in X3.1. Are you
compiling HTML Help? My guess is that you won't see any difference
in the output when you compile.
However, the problem comes when you try and do this the other
way around. Robohelp is not backward compatible. So you won't be
able to pass a modified project back to your client. Rick the
robowizard has a few tricks to help with backward compatibility if
you don't mind going under the hood. However, not sure if this
works with X3.1 jumping to X3.1.
What type of output are you generating?
Hope that helps
Craig

Use HCM processes and Forms without using the Enterprise Portal

is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
Saurabh

Hi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

HT201210 I have a "firmware file not compatable" message whilst trying to update my iPhone4 from Sofftware Version 5.1 to 5.1.1 via iTunes. I have tried about 3 times and keep getting the same message

I have a "firmware file not compatable" message whilst trying to update my iPhone4 from Sofftware Version 5.1 to 5.1.1 via iTunes. I have tried about 3 times and keep getting the same message. Any ideas/suggestions?

Since posting the above - I have now tried downloading the update on my iPhone rather than via iTunes, and its just worked and installed and seems fine! Was a lot quicker as well than the download time via iTunes

Ask the Expert: Cisco Unified Contact Center Express (UCCX) Version 10.0 - Upgrade, Migration, and New Features Overview

With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati

XMII version 12 and NW SPS compatibility

Hi.
I have been trying to find anything regarding xMII version 12 and compatibility with Netweaver SPS's. In the xMII installation guide it says SPS10 or later. Is this for real and can I upgrade Netweaver to the latest SPS ??
I have from Jeremy that I should use SPS10 to SPS14.
And finally, where to find the information, so I does not have to disturb all of you another time
PS. I have been via the PAM page, but it does not say anything. Installation guide (as I remember) says SPS10 or later.
BR
Poul.

Poul,
Per the installation guide: http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000683969&_SCENARIO=01100035870000000202&_OBJECT=011000358700000202932007E
"SAP xMII 12.0 runs on the SAP NetWeaver Application Server (SAP NetWeaver AS)
component of SAP NetWeaver 7.0 (2004s) SPS 14 or higher."
A nice thing about the PAM ( https://service.sap.com/~form/handler?_APP=00200682500000002212&_EVENT=DISPLAY ) is that it has some convenient links for s/w download and the guides too.
Regards,
Jeremy

Forms and reports migration tools from oracle and other vendors

Can someone through some light about the migration tools available on the market for the migration of oracle forms 10g to 11g?

are there any tools for doing this activity like oracle recommended tools?
Your question is unclear. As IK mentioned, the only tool you need is a new version of Oracle Forms/Reports. Open your v10 modules in a v11 Builder and select Save. You now have a v11 module. Doing a "Compile All PL/SQL" before saving is a good idea, but not required. The Builders and utilites provided with the version 11 installation are the only supported tools for upgrading your application. If you are trying to do the conversion of many Forms files in a scripted manner, you can use the Forms compiler in a script. Generating new "X" files will also update the source modules (fmb, mmb, pll). See MyOracleSupport Note 955143.1
Also included in the installation in the Forms Migration Assistant. Although it is more useful to people coming from older versions, it can also be used to move from v10 to 11. It allows you to select more than one file at a time. Documentation for this utility can be found in the Forms Upgrade Guide.
Using the Oracle Forms Migration Assistant

OID 10gR3 full version number and compatibility

I am a bit confused about the OID version and compatibility. Can anyone help?
Siteminder r12 is compatible with OID 10gR3 as per Siteminder compatibility matrix.
When I try to find OID version number and in turn its compatibility with Operating system and database, I am finding it hard to understand which version I should be looking for when I want to use OID 10gR3 (e.g. is it 10.1.4.0.1 or 10.1.4.1 or 10.1.4.2 etc)
There is no clear documentation providing this information. From one of the documents (www.oracle.com/technology/.../internet_directory_wp_10gr3.pdf) it seems it is 10.1.4.2
However when I goto download site it only has 10.1.4.0.1.
Also, as per certification matrix of OID 10.1.4 it says it is compatible with OEL5, whereas after downloading 10.1.4.0.1 it fails to install complaining that it needs Red Hat Linux 3 or 4.
Need you help to understand this.
Thanks,

The Base line version is 10.1.4.1.0, all others are patches. The latest being 10.1.4.3.0, which can be downloaded via MOS (formerly known as Metalink).
10G release 3 is marketing speak; 10.1.4.1 thru 10.1.4.3 are all 10G Release 3 (but different patchlevels. Guess you can speak of OID 10G release 3 patch 2, when you mean OID V10.1.4.3.0 - technicians tend to use versions).

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download.

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?

Go to iTunes > about iTunes. What version are you running? If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.

About Version compatibility and Forms Migration

Similar Messages

Maybe you are looking for