About which user-exit do they talk at note 424635

Hi!
Has Anyone an idea about which user exit they talk about at note 424635 ?
Thanks and Regards,
Franz

1)go to the main program sapmv45a
include MV45AFZZ ->userexit_move_field_to_vbak
depending on ur conditions ...
keep a break-point in the form userexit_move_field_to_vbak ,and if it stops there Check for vbak-lifsk .
Write a condition to set the deliveryblock that is vbak-lifsk = 'xx'.
2)then regarding your second point ...what is the middle ware used to interact with legacy system
let me know

Similar Messages

I have to find out which user exit useing

Hi All,
functional consultant useing user exit ,for substitution of profir center.
can any body plz tell ,which user exit he useing to get profit center value.
thanks,
venu.

For substitution Tx:GGB1 is used. go to the tx, select FI accounting, line item, Step, double click on substitution, u'll find user exit like U100, double click on it, thats the code used for substitution.
If its different functionla area, select it instead of FI in GGB1
Tx: GCX2 shows the Z program (like ZGGBS000) used for substitution.
Regards
Sridhar
Message was edited by: Sridhar K

Populating cost center automatically by Ts code WVFB - Which user exit ?

Hi experts,
I want to populate cost center and to do 'k' assignment automatically using WVFB for Sotre Order creation.
Which user-exit should be activate? thanks a lot in advance.
( the purpose is when user create a store order by transaction code WVFB , the fields of 'k' assingment and cost center don't need to be filled out, an user exit should make 'k' assignment & fill out cost center KOSTL. I just need to know this user exit).
EXIT_SAPLWVFB_002 will be good for my problem? please advice. thanks.

Yes. I solved my problem.
EXIT_SAPLWVFB_002 was used to do it.

Which user exit is triggered on Save of CV01N/CV02N

I have some requirement to be triggered on the Save of a document using CV01N/CV02N.
I found three exits in the transaction EXIT_SAPLCV110_001, EXIT_SAPLCV110_002, EXIT_SAPLCV110_003 but none of them get triggered on Save even though I have activated the enhancement.
If someone knows which user exit gets triggered on Save of CV01N/CV02N please let me know.

You can use BADIs.
You can use DOCUMENT_MAIN01.
Go to SE18. Display 'DOCUMENT_MAIN01.
On the menu bar, Click on Implementation > Create.
Give your own implementation name starting with Y or Z.
There's a method called BEFORE_SAVE in this.
It has all the data DRAW, DRAD, DRAZ etc as Changing Parameters.
So you will be able to manipulate that data in that method.
Activate the implementation And you are good to go.
Reward if helpful.

Which user-exit or BAPI triggered when a schedule line is changed

Dear All,
Does anyone know which user-exit, enhancement or BAPI is triggered when we do change on schedule line item?
Let's say, I have two line schedule line item, then I do change for delivery date. After triggered "Item Availability" button, system will accumulate confirmed Qty on first line and second line into first line. And then the second line will remain zero.
I need to know, which enhancement or user exit or any standard FM do this process.
I searched, but not found any user exit or enhancement that will go through.
Best regards,
Dinivian.

Hi,
For MFBF there are sollowing user-exits....
XMRM0001 - Backflushing in Repetitive Manufacturing.
PTRM0001 - For lead column in REM planning Table.
SAPLRMPU - Customer Exit for Article Staging.
Reward points if useful....
Regards
AK

Which User Exit / BADI I can use?

Hello All,
While Saving PO or PR I need to check the value of commitment Item(FIPOS).
Which User Exit / BADI I can use?
Regards,
Lijo John

try this method;
Go to Tranaction: SE24.
open class CL_EXITHANDLER
Open the method " GetInstance"
Put Break point in the statement
call method cl_exithandler=>get_class_name_by_interface
when u run the po transaction it will repeatedly stop at the breakpoint check the value of exit name there press f8 to continue now when u just save the po then check the values of exitname in the debugger

Which user exit can be use before production order creating?

which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.

Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit

Which user exit to use in Fixed Assets?

You should have Funds Management implemented and integrated with Asset Management to understand this problem.
Create an asset (AS01) and while doing that notice that you dont see a "Derive Again" button in the Time-dependent tab. Save and Exit. Now got to AS02 and then to Time-Dependent tab. Now you see a "Derive Again" button at the bottom.Click the Derive Again button, you see that the Fund and Fund Center are automatically derived. Save it.
Now my question is - Is there any user exit/bte through which I could automatically populate the Fund and Funds Center once the asset record is created. ( instead of manually going to AS02 and clicking the Derive Again button every single time. Because it doesn't make any sense for us to tell the end user to do that manually every time)
Appreciate if you could throw your ideas in detail. By the way we are using ECC 6.0
R@vi

Dear Ravi,
Check the following one's,I hope this can help you.
AAPM0001 Integration of asset accounting and plant maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Regards
Mangalraj.S

Which user exit MV45AFZZ or MV45AFZ1 or MV45AFZB to use.

Hi All,
In the Sales Order Types ZDRC and ZCRU, when Sales Org is US15, the field VBAP-MVGR1 shall be mandatory.
We need to use MV45AFZZ or MV45AFZ1 or MV45AFZB user exit.
In MV45AFZB, USEREXIT_CHECK_VBAP, seems closest, which is used to carry out additional checks (e.g. for completion) at item level.
Please suggest.
Thanks.

Hi
Pl check this exit...this may be useful to meet the requirement
in program MV45AFZB
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
Thanks,
Ravi

About the user exit of MM06

Dear experts,
Can you tell me the user exit of MM06?
Best regards,
Merry zhang

hi,
there is no user exits availble for this transactions..but badi's are availble.please find badi for your requirement..
finding badi.
go to se 24
and give class CL_EXITHANDLER
click diplay
and goto method GET_INSTANCE and double click on this
and put break point at call method cl_exithandler=>get_class_name_by_interface
and in another session open MM06 transaction ,then it will go to debugger mode
then keep on press F8 and observ on which badi it triggers MM06.
based on your rerquirement.find apprpriate badi
Thanks and regards
Durga.K

Which user exit belongs to which project

hello,
1) imagine I have got the user exit name
   EXIT_SAPMV45A_003 and now I want to find out
   to which project this user exit belongs.
   How can I obtain this information
2) Is it possible to deactivate only one
   or designated user exit instaed of the
   whole project
Ilhan

Hi,
Herewith i am sending the sample coding for the report which will help to u can find through whatever transaction codes are having how many user exits are there and through that u can run that user exits and u can go to any transaction code.
*& Report YMS_USEREXITTEST                                            *
REPORT YMS_USEREXITTEST no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR' and object = 'FUGR' and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab where pgmid = 'R3TR' and object = 'SMOD' and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt where sprsl = sy-langu and name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
-End of Program-
Thanks,
Shankar

Which user exit allows to get cost element derivation in CO-PA after F-op.?

Dear All,
According with business requirements we need to get cost elements used in Sales in CO-PA document after F-operations.
We've got the answer from SAP that it could not be done by standard way. Cause profit segment we define in Sales order before we had performed outbound delivery (vl01n )and billing (vf01).
However, we still need to get this cost elements after F-operation in CO-PA documents.
Could anyone name user exit which could be used for that purpose?
With best regards,
Kamila.

Hi,
Thanks for response. But the link doesn't work.
"System Error
Sorry, internal server error occurred (500 error).
What can you do?
Try selecting Refresh in your browser.
Check the URL in the browser address bar and make sure it was entered correctly.
Use our Search feature (in the top right hand section) to locate the correct URL for the page or document you are trying to access.
If all else fails:
Please take a screenshot of this page (usually Function + Print Screen), or copy the URL from the browser address bar along with the text of the error message and email it to [email protected] Please include your user ID in all correspondence.
<< Go to the Homepage."
Could you please, resend this link?
Thank you,
With best regards,
Kamila.

Which user exit in FM IDOC_INPUT_ORDERS to take IDOC segment E1EDP01 Plant

If the EDI inbound create order IDOC segment E1EDP01-WERKS is populated with plant code. Can some one please inform what user exit in FM IDOC_INPUT_ORDERS I need to modify to capture the plant code (E1EDP01-WERKS ) from IDOC and use to create and save that plant on a new order.
We saw that in "LVEDAF5N" other fields like E1EDP01-LPRIO are being moved from the incoming IDOC, but nothing for E1EDP01-WERKS.
We are hoping that we can use any of the SAPLVEDA exist ......EXIT_SAPLVEDA_XXX but not sure which one.....so if some one out there has some information please share ......

Try with the below exits.
EXIT_SAPLVEDA_004
EXIT_SAPLVEDA_005
Thanks,
Srinivas

How to delete Remittance Advice through FB01 - which User exit or BADI?

I have created a BDC program for transaction FB01 to create an FI posting. During this BDC session, i need to delete the associated remittance advice using the function REMADV_DELETE.
Is there a user exit or BADI that i can use to call REMADV_DELETE once the FI posting is successful?
Thanks,
Jay

Jay,
In BTE there are two types of exit - Publish and Subscribe (P&S) and Process. Generally P&S give access to read data from a transaction and trigger your own processing as a result, while Process give access to change parts of the data in the SAP transaction. For what you want, P&S probably gives the functionality you need.
You need to copy the sample function to a Z function in a Z function Group. Put in your code, and activate the function and function group. As an initial test just a break-point in the code is useful to see when the exit executes and what data is available.
Then in transaction FIBF you need to insert customising to link in and activate the exit.
In the FIBF transaction, go to menu option Settings>Products>Of a Customer. Select New Entries and create a Z... entry with appropriate text. Leave other fields at this time and save.
Go to Settings>P/S Modules>Of a Customer. Select New Entries and create an entry for the relevant event number with the Z product you just created and add your function module name. Country and Appl can be filled or left blank for "All". Save the entry.
Go back to the Settings>Products>Of a Customer entry and selct the activate check box and save the entry.
Your function should now get executed at the relevant point. Remember this will get executed in all posting transactions, so include appropriate checks for your transaction code, document type, etc.
One note. Transaction FB01 performs some of its updates using "IN UPDATE TASK" so some records may not be created at the time some exits are executed. In the old style debugger a commit is performed when you debug so the update is triggered, but then when you run without the debugging things work differently. The new style debugger lets you debug these exits without the commit and thus gives a better picture of what will really happen.
Andrew

Which User-Exit is used to create IDOC when we release procee order?

My question is the IDOC (Basic type: LIOPRO01 and Message type: LIOPRO) is generate when user save the process order or when he release process order? I want to trigger IDOC when user release process order.
Is this the use exit i can use PPCO0007?

hi
ty this user exit
EXIT_SAPLCOIH_002
Bharat Bhushan

About which user-exit do they talk at note 424635

Similar Messages

Maybe you are looking for