ABS WINE issue, or simply looking for 20041019 package

Hello folks. I am having a slight problem with WINE. I am in need of wine 20041019 package. I used to be able to run foobar2000 on WINE 20041019 flawlessly, with no redraw problem or anything and it was simply working like native. However, at one point, wine was upgraded to newer version and foobar2000 started having various problem.
The problem is, I don't have that package cached and for some reason, I can't build functional WINE via ABS. Any version of WINE I installed through pacman worked, however, when I try to build WINE via ABS, it creates a WINE package, and I can install it, but it doesn't run. When I type in:
wine blahblah.exe
It hangs, without spitting out any error or doing anything, and I just have to Ctrl + C to kill it. It doesn't even start. WINE seems like the only package that doesn't build well, as I build various packages via ABS quite often. Other apps usually build quite well. I tried quite a few things to see if I could get foobar2000 to work again on WINE, but so far no go. I tried that sysctl thing as well as it was suggested with 2.6.10...
If anyone has tips to build WINE, or have 20041019 package, let me know. I miss foobar2000 [/code]

nightfrost wrote:Hate to revive a dead thread, but I'm need of that package as well. May I ask where you found it?
check http://ftp.nluug.nl/os/Linux/distr/archlinux/
it might be there

Similar Messages

OSD TS looking for previous package version, not finding it.

Yesterday, I upgraded our SCCM environment from 2012 R2 to 2012 R2 CU3.
I am currently unable image most machines (only VM's work, for some reason) as the TS is failing with the error about it not being able to find the package xxx00002, which is our Configuration Manager Client package. As a part of the CU3 upgrade, it
initiated a update on this package, taking it from version 10 to version 11. All distribution points now have the version 11 package.
My pain point is that the task sequences we are attempting to reimage with are failing when looking for version 10 of the package. Snippet below. I'm hoping someone has some ideas on how I can resolve this or has seen it before. I tried
changing the package in the 'Setup Windows and Configmgr' step to another package, saving, and changing it back, to no avail.
Log snippet below.
Content location request: TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Package : XXX00002.10 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Client : GUID:EB7523EE-E5F0-48B0-8F27-C84D21BEE0DC
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Local : 1 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Remote : 4 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Internet: 0 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Sending RequestContentLocations for XXX00002
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Setting message signatures. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Setting the authenticator. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
CLibSMSMessageWinHttpTransport::Send: URL: servernameFQDN:80 CCM_POST /ccm_system/request
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Request was successful. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
::DecompressBuffer(65536) TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Decompression (zlib) succeeded: original size 244, uncompressed size 882.
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Location Reply: <ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="111" MasterSiteCode="111"
SiteLocality="LOCAL" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site><Site><MPSite SiteCode="222" MasterSiteCode="222" SiteLocality="LOCAL" IISPreferedPort=""
IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><RelatedContentIDs/></ContentLocationReply>
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Processing 0 locations. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
No static content server. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
LocationsList.size() > 0, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,2138)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
FALSE, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,1930)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Content location request for XXX00002:10 failed. (Code 0x80040102)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
hr, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,2702)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Failed to resolve PackageID=䛸ǅ TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
(*iTSReference)->Resolve( pTSPolicyManager, dwResolveFlags ), HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,3488)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
m_pSelectedTaskSequence->Resolve( m_pPolicyManager, TS::Policy::TaskSequence::ResolvePolicy | TS::Policy::TaskSequence::ResolveSource, fpCallbackProc, pv, hCancelEvent), HRESULT=80040102 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1564)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Failed to resolve selected task sequence dependencies. Code(0x80040102)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Thanks in advance!
Scot

Yes. They have version 11.
In the meantime, I have created a new Configuration Manager Client package and swapped it out with successful results, as might be obvious.
Most likely, I'll simply update the package on the distribution points to resolve it permanently (to version 12). It's just not a quick fix for us as we have
a lot of distribution points. Sending down another copy, since the files are already there in content library, won't require nearly as much WAN traffic or time. We'll swap the task sequences back once
we update XXX00002 to version 12.
Thanks,
Scot

Looking for Installation package "AcroPro.msi"--my computer says it's already installed, but I can't find it or get it to run

I am looking for the installation package "AcroPro.msi". I had previously installed Acrobat Pro XI, but it seems to have disappeared, although the computer says it's installed. Where do I find this installation package?
I use Acrobat Pro to save documents as pdf files, mostly tax returns and documents for transmittal to clients

Hi Billstrom,
What was the Acrobat version installed on your machine.
You may visit this link to download Acrobat version you own: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
If you have windows, click on Start > in the search box , type Adobe Acrobat and wait and see if you have Acrobat listed there or you may visit C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat and look for "Acrobat.exe " or "Acrobat". It should be there if you have Acrobat Already installed.
Regards,
Ajlan Huda.

Looking for SUNWrsc package (rsc2.2.3_packages_s9.zip)

Hi,
I am looking for the SUNWrsc package: rsc2.2.3_packages_s9.zip. The link http://www.sun.com/servers/rsc.html on the Oracle web site does not appear to point to it.
Does anyone have it? Could someone share it as a download? My search on the web for this file has been very unfruitful.
Thank you.

I actually found it on support.oracle.com, here is how to:
1) login to support.oracle.com
2) click on "Patches & Updates" in the top menu
3) in the search window (located on the right) clic "Product or Family (Advanced)"
4) in the updated search window type "Sun Remote" in the "Product" box, then select "Sun Remote System Control"
5) Click the "Release" box (which says "Select up to 10", in that box click "Sun Remote System Control" and then select the version "Sun Remote System Control 2.2.3".
6) In the new window you can now download RSC 2.2.3 (called p10264451_223.zip) by marking it and clicking "download".
hope this helps! I've noticed that a verbose instruction is often better for the oracle support site, since its not very intuitive .
.7/M.

Agent 10.2.0.3 install on OEL5 looking for OEL4 packages?

We are trying to install Oracle grid control management agent 10.2.0.3 on OEL5 x86_64. The install is looking for packages which are not contained in OEL5. It is looking for pdksh, openmotif21, xscreensaver. These packages are available for OEL4. How do I install the agent?

Please check the metalink certification.10203 agent is not supported against 64 bit OEL, it certfied only on 32 bit OEL.

Looking for VRML packages

Hey all. I am looking for either VRML packages that work with Java or an older jdk that has VRML (and where to find it). I've been told that jdk 1.1.7 does but, I am having trouble finding it. Any help would be appreciated.

Upgrade kernel to version which is equivalent to distributed ASMLib package.

Install win 8.1 error looking for disk

I have a new Mac Mini w/ Mavericks OS. I have been trying to install Win 8.1 for days. I had a keyboard on order, finally came today to allow me to Recover the Mac from a failed Win 8.1 install. I have read hundreds of conversations on this topic. And to air one question constantly asked, 'Why! Why is it that there are dozens of different ways people are having to use to install one program? Why?!?'
I am able to get to the page in Windows setup where I am to select the drive called BOOTCAMP.
I select the drive
I then FORMAT the drive
Then I am told that drive - or any installation for Windows drive - is NOT found or available.
I've gotten to this screen a dozen times now.
I have arrived there by two methods 1) following the 'book' on Win 8.1 installation via BOOTCAMP and 2) Once here I shut the machine down and reboot with CTRL-key at restart -> select the WINDOWS drive from those available -> then follow the Windows install panels. Which, every time leads me right back to this page.
A note about this page. Every online tutorial, including the one on the Windows site and here on Apple forums, shows a DIFFERENT layout of the page. The tutorials show a page with a link to click for Advanced settings. My window just shows those Advanced settings. I don't see how this makes the process work or not, but that's a peculiarity of my setup woes compared to the instructions that exist.
NOW .. HOW in the name of all that is sensible!! -- do I get from the page where I select the partition I need to install Win 8.1 on..?
Again ..PLEASE!!! DO NOT retroute me through all the old settings everyone has been hashing about since September 2013. I need to know What Works NOW - January 2014- to get Windows 8.1, installed and working on my Mac Mini running latest version of Mavericks.
Thank you ... I HOPE!

Windows 8.1 is not yet officially supported in Bootcamp. There is no way to know when it will be supported.
Having said that some systems will install it and it runs fine, though these systems appear to be few and far between.
The only advice I can give is to try some of the workarounds available on various sites or wait until it is supported by Bootcamp.

Urgent help in looking for a package

Hi,
May i know where to download sun.awt.win32.Win32PrintJob?
I have searched for it but fails to find it.
Thanks
Yours sincerely,
Xueli

hi,
the class Win32PrintJob is there in rt.jar in the jre/lib folder.
but the package name is sun.print.Win32PrintJob just see if this is enough.. (jdk 1.4.1)
b t w me too couldn;t find any package of the form.. sun.awt.win32.Win32PrintJob
-cheers,
Jer

Looking for some packages

Hi there.
I'm just finished installing the Solaris 10 on a sparc, and need some additional packages that are not present by default on when installing the OS.
what I'm missing is :
64-bit drivers
SUN ONE STUDIO 8
SUNWsan
SUNWsprox
SFWbdb
SFWcurl
SFWsudo
I guess the "SFW" are freewares ?
I was able to access the Sunsolve to load the patch bundles, as well as download the Solaris 10 for sparc, but I can;t find the page where to find the missing applications / freewares.
Can someone help ?
Many Thanks !

I found all those packages on the OEL4 installation cd's. I am pretty sure they're also included in release 5.
Did Oracle finally create an installer for BI or do you still need to install it on a Windows Computer and copy the files to the Linux environment?
And watch out using OEL5, it's not certified for all Oracle software. I had to find this out the hard way when I was installing R12 on it.
Regards,
Jeffrey

Looking for FREE info on app submission process

Hello,
I am looking for information on the app submission process to assess the feasability. I am at a very, very early stage at this point and would like to get details on the technical requirements, any finacial requirements, and an approximate timeline for an iOS app submission.
I have poked around on these forums and found some info, but most of it seems to be locked behind the paywall. As I stated before, at this time I am not looking to pay the $99 to sign up as a developer without getting some of the very basic background information. Does anyone know of any handbooks or publications with the details that are available for free? Am I just looking in the wrong place?
Thank you in advance for your time.
-Spencerm1

Hmm... that's a shame.
I am definitely more serious than simply looking for blog topics, but I am not in a position to fully commit to something that may have requirements I can't meet at this time. I'll keep poking around.
Thanks!

Looking for a way to encode IDs

Hi
I have a problem � I am looking to join two data bases for a research I am trying to do but -
These two databases are from two separate government agencies. Both include different info of (among others) the same people, identified by personal IDs. Neither of them is allowed access to the info of the other. I am not allowed to see any info with IDs.
So I am looking for a package that can transform the IDs in two sites into another series of numbers, identical in both cases - That I will later be able to join
Is there a friendly package that can do this? A nice GUI will help a lot with bureaucracy! :(
Can you tell me about a nice complicated function that will encrypt as needed here and that the values of which are dependant on a user given input so that the same input will always (in the two cases�) give the same results?
Thanks a lot!!!
gil

But I have two questions:
1) Its an abstract class, any implementations you
know of? If not, I couldn't get what do I need to
implement?The usual object-oriented magic is going on here. The static
instance method is returning instances in some non-abstract subclass.
2) How do I get both sites to run exactly the same
encryption so I will be able to join them? Without
this it will be useless� will using MessageDigest
with SHA give me that (I couldn't figure it out)?The digests are deterministic and portable. You will get the same result
on difference machines.

No way to view changes with PKGBUILD for community packages

I noticed that you can't view PKGBUILD changes for new community packages. I thought we move community to svn so it should be viewable.
Example:
http://repos.archlinux.org/viewvc.cgi/c … nity-i686/
Just my 2 cents.

Everything that is need for the transition is still a work in progress... This a known issues. As a workaround you can use ABS or check out the SVN for the packages you are interested in.

Just received my GS60 2QE-040XFR: Big issues/Looking for help

Hello,
I just received my GS60 ghost pro without any OS. Installed Win 8.1, drivers available in the hard drive, anti virus... and slowly but surely started having more and more BSOD (several types of error codes). At the same time, the laptop started having issues to reboot: looks like it's powering up during 1 second, then turning off, then trying to turn on 2 seconds after, turning off, etc... On the first tries it was able to boot onto the Win 8.1 from time to time (to have some more BSOD), now it's over, it can do that for minutes so I am not even trying anymore.
So I started looking on the internet for possible solutions, and my guess is that I have 2 different issues, I'd like to have some input about the community as I am quite new to MSI hardware:
Issue #1-The regular BSOD may come from the Killer Lan drivers. It looks like they have a some bad reputation, and I believe I started having BSOD as soon as I installed them. I'd like to format/install a new fresh Win 8.1 and not install this drivers anymore, unfortunately I cannot because of issue #2. Anyway, can anybody advice? If you believe the issue is coming from these drivers, is there any proper way to delete them and install better ones? which ones then?
Issue #2-Unfortunately for this one I believe I cannot do anything but sending the laptop back to MSI. My guess is that the laptop is not even able to reach the BIOS when booting. I'd like to clear the CMOS but I would need to open the laptop, which would end the warranty... Does anyone believe there is a possible workaround here?
Hope someone can help...
Sorry for my poor english, that's not my native language.

Not sure if you are able to enter the OS now, but I'll still suggest you go to MSI's website to update your drivers.
http://www.msi.com/support/nb/GS60-2QE-Ghost-Pro.html#down-driver
If all of the drivers are the latest ones, you can press CTRL+ALT+DEL to open Task Manager and go to Startup page to disable Killer Manager and restart again to see if it resolves the problem.

Wine Project looking for Photoshop CS users who want Linux support

If you're not a Linux user, or if you don't like the idea of
running Photoshop for Windows on Linux, you can stop reading now,
this message probably won't be interesting to you.
The Wine project is looking for hardcore Photoshop CS or 7
users who use Photoshop professionally, all day, every day,
and who are willing to tell us why they can't do that in Linux
using Wine yet.
We know everybody would like Photoshop CS3 or at least
CS2 support, but support for CS2 and CS3 isn't quite
ready, so we'd like to focus on our strengths, and support
Photoshop 7 and CS excellently. Don't worry, we're also
working on the CS2 and CS3 issues. Getting all the 7 and CS
issues taken care of builds a stronger foundation for CS2 and CS3.
If something doesn't work in Photoshop 7 or CS itself,
or your favorite plugin works in Windows with 7 or CS
but not in Wine, please let us know how to reproduce
the problem. To do that, just reply to this post,
or post in the wine-users mailing list,
or leave a comment in the wine appdb for Photoshop 7 or CS,
or file a bug in the Wine Bugzilla,
whichever you're more comfortable with.
We'll take it from there; if we can reproduce it, we'll
file a bug and see if we can get a wine developer to fix it.
Ideally you'd test with the latest release of Wine
(currently 0.9.51), but if you're still on a slightly older
version, don't sweat it, we'll retest on the latest for you.
Thanks!
Dan Kegel
Wine 1.0 Release Manager

Here's my original post the cnet article is based on:
http://google-opensource.blogspot.com/2008/02/google-sponsors-wine-improvements.html
Here's another post giving more details:
http://www.winehq.org/pipermail/wine-devel/2008-February/062550.html
Here's the response of Adobe's Photoshop product manager:
http://blogs.adobe.com/jnack/2008/02/wine_offers_imp.html
Here's another nice writeup:
http://arstechnica.com/news.ars/post/20080219-google-intoxicates-linux-users-with-wine-imp rovements.html
At the risk of repeating myself: I'm serious. I really want bug
reports from professional Photoshop users. Leave them here,
send them to the wine-users mailing list (see http://winehq.org),
or file one in our bug tracking system (http://bugs.winehq.org),
any of the three ways is fine.
Thanks,
Dan

I have brought Lightroom 5 for a new MACBOOK PRO, but wondering, am I still alllowed to load on my desktop as well running Win 7? It looks like the office enviroment that says you can!

I have brought Lightroom 5 for a new MACBOOK PRO, but wondering, am I still alllowed to load on my desktop as well running Win 7? It looks like the office enviroment that says you can!

Eww, thanks for your reply, as it makes good sense, and common sense is practical when you walk into an Apple store.
I guess all the reviews and great specs of the new MB pro's made me want one...
I should probably use my current setup till it is totally outdated or simply is beyond repair.
I could ask Santa Claus for one, but by than, the 2012's will be coming out..:)
Thanks Eww for your reply, IAN....

ABS WINE issue, or simply looking for 20041019 package

Similar Messages

Maybe you are looking for