Absence days not picked up in PARX and PARTA

Hi
Under PARX which is in the output of function PAB in the PY schema, we are not getting the absence days when a start and end time is entered in the absence record. If we book a full day it ouputs 1 day absence which is right. If we book a half day, say from 09:00 to 12:45 the absence days shows 0 in PARX instead of 0,5.
The absence days is needed to deduct unpaid days in payroll (NPO), PY reads PARTA to get absence days but this also shows 0 when start and end times are entered.
Can you kindly help?
Kind Regards
Sajan Mathew
Removed_Moderator

Hi
dont give the time
just fill the hours as 4 for half day
from the work schdule it will automatically brings the time
for afternoon half day holiday
u have to input
the time say for example if ur ws is 9-17
9-13 for for forenoon
13-17 for afternoon
with regards
partha
keep sharing and learning

Similar Messages

WebDynPro ABAP iViews not picking the portal look and feel

Hi,
In our case , WebDynPro ABAP iViews not picking the portal look and feel.
Is there any way to provide the custom developed portal theme link or css file to the WebDynPro application.
Can it be done programmatically in the WD ABAP application.
Best Regards
Sid

Look at the below link, it will answer your question:
Re: EP 7 Portal stylesheet with WD ABAP
Raja T

TS4079 Siri is not picking up my voice and Siri is not talking back after ios7 upgrade. .?

I have tried to use Siri after upgrading to ios7 and now the ring just spins with suggestions of what to ask , but Siri does not pick up my voice and Siri does not speak back.
I have internet connection , I have done a phone reset etc etc , it was working fine before the upgrade , any ideas please.?
Also have the language set to uk english ..
Upgrade to iPad 4 worked fine , just the phone. (Iphone5)

ok, got the same problem! here is what i tried and found out:
ok, now i tried again a factory reset and it didn't help...
Also tried a reset with restoring from an icloud backup! Didn't help...
Switching Siri off an on, didn't help
Switching off Siri and reseting the iPhone (holding down the power- and the homebutton till Apple logo) and then switching back on, didn't help...
Using Siri with the headset, working!
Using raise to speak option working also! So only the Homebutton activation does not work!
Called the support, the answer is: Buy a 35 € protection plan or help yourself...

Liquidity Report not picking up Noted item and Sales orders

Hi Experts,
I created planning levels from source as PSK, yet the liquidity is not picking up these items from sales orders and purchase orders. Also while creating noted items, i have given planning levels in the configurarion and the same is not picking up in the liquidity too
Please advice
Thanks in Advance

Hi Hien,
We have created planning levels separately for MM and SD and we have created under SDF and MMF respectively.
IT is working for group created for direct FI entrly and linked the same with PSK and the same is working fine.
I am new to FSCM. Can you please elaborate FDFD?
Thanks and Regards

My computer will not pick up the I-pod. Will not pick up the port and I have replaced the cord thinking there may be a problem What do I do next???

It is disabled and I need to do a restart. I have tried on 2 different computers. I have replaced the cord. I have un-installed and reinstalled Itunes more times then I can count. I have checked all the ports and restarted them. It is not picking up the device at all. Its not the USB ports on the computers because they read my document USB drives I do not know what to do next.

- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Itune 11.3 is not picking up my iphone5 and iPhone4

Dear User group,
I recently update my iTunes to version 11.3 on my windows 8 64bit operating system. Every since i have update the itunes software, itune does not even pick up any of my devices, i have an iPhone 4 and an iPhone5. both devices are updated with iOS 7.1.2. I'm highly irritated because i use both my device as ipods too and i have the latest Tomorrowland 2014 sets and i can't sync. beside not being able to sync, iTunes does not even pick up my devices. Can someone please assist me.

iOS: Device not recognized in iTunes for Windows
Start here

HT201263 MY IPHONE 5 WILL NOT CHARGE AT ALL AFTER THE BATTERY RAN OUT. ITUNES IS NOT PICKING UP THE IPHONE AND TRIED SEVERAL GENUINE CHARGERS AND STILL IS NOT CHARGING JUST A BLACK SCREEN. THE PHONE HASN`T BEEN DROPPED OR GOT WATER IN IT. IT ONLY 12 MONTH

I have the Iphone 5, it is just over 12 months old, and it was low on charge, by the time I could get to a charger it had cut out. So i plugged it in the charger like no other time, went back after 10mins and noticed the screen was still black. So i tried to turn it on but nothing still black screen, i changed the charger for my other apple charger and the same thing happened. i decided to plug it in using the usb in the computer and still the same thing has happened. Took it to the apple genuis team to be told they can`t do anything, and now its out of its 12 months warranty makes it even more difficult. Has anyone else had this issue, this is my 4th iphone since they released them and am very dissappointed to say the least that the iphone 5 for me seems to have a life span on just over 12 months and no one is prepared to take any responsiblity as i have not damaged it. One extremely dissappointed Iphone user. Any ideas on how to get it working again?

Hey jojo-10!
Here is an article for you that can help you troubleshoot this issue with your iPhone:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Adobe Clip Notes picking up random words and timecode markers from speech transcription metadata

I've been experimenting with the speech transcription feature in Premiere CS4 - sometimes my results are good, sometimes not. Regardless, after I'm finished editing my project and export it via Adobe Clip Notes for client review, the clip notes file has hundreds of random words from the speech transcription already time stamped in the PDF. The only way to remove them seems to be going through the PDF document and deleting them one by one. There are no markers visible in the Premiere timeline or anywhere else before I export the file. I would go back and delete the entire transcription from the metadata panel in Premiere, but there doesn't seem to be any way to do a bulk delete.
Anyone else run into this problem?
Thanks!
Ed
P.S. I'm all up to date as far as software is concerned.

I have a very similar issue,,, analysis text field is always empty
I tried with avi files, with mp3... same result...
I am using c5.5 but also tried a trial CC with the same outcome.
very strange

Oracle B2B not picking up Document type and document version from JMS msg

Hi,
We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
Error Code B2B-50083
Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
This is our Java code for testing that drops the message, and I can see the JMS header with these values.
message.setText(messageText);
message.setStringProperty("FROM_PARTY", "CT-Sender");
//message.setStringProperty("FROM_PARTY", "RemoteTP");
message.setStringProperty("TO_PARTY", "MyCompany");
message.setStringProperty("DOCTYPE_NAMEe", "CT");
message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
We were able to test a 850 document successful through different document and agreement ....
Thanks
John

We have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
Thanks
John
Id 0A9F196E132459F393C00000184B4897
Message Id 0A9F196E132459F392300000184B4893
Refer To Message Refer To Message
Sender Type Name
Sender Value CT-Sender
Receiver Type Name
Receiver Value MyCompany
Sender CT-Sender
Receiver MyCompany
Agreement Id
Agreement
Document Type
Document Protocol
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 09/07/2011 04:40 PM
Receive Time Stamp 09/07/2011 04:40 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)

External Microphone Not Picking Up Sound

Hello,
I recently bought a product that works better with an external micorphone headset. This was my first time ever using one with my laptop. When I went through the set up process, the microphone was not picking up any sound and I could not hear anything through the external headset. I tried using both the microphone and headset port as well as different headsets with the same result. The headsets work fine on other devices.
When I use just a plain headset connected through the headset port, I can hear just fine.
I went to Control Panel>Hardware and Sound>Sound>Manage Audio Devices to troubleshoot, but nothing worked. I tryed updating the latest drivers and was told the latest are already installed.
The Product Name is : HP Pavilion dv7 Notebook PC
The Product # (NOT serial number) is : B5R46UA#ABA
The External Mic is called: IDT High Definition Audio CODEC
Please advise,
chriscinthed
This question was solved.
View Solution.

Hi @chriscinthed ,
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. It will also fix the sound.
When performing a System restore please note remove any and all USB devices and the headset. Disconnect all non-essential devices as they can cause issues.
In talking to Rosetta Stone says the headsets for use with there software is for USB connected headphones Plug and Play technology. The other computers you have tried do they have Beats Audio. To enable or disable Beats Audio, press the fn key in combination with the b key. The Jack does have influence on the Beats Audio which might need to be turned off. Then try the Mic.
Did you ensure that you are plugging the Mic headset into the selection for headsets on the Notebook.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

House Bank not picked in the payment proposal - F110

Dear All
We have done the FBZP configurations to use F110 automatic payment run. However the house bank and account ID does not get picked automatically. We have to go line by line and reallocate. We have maintained the payment method, and house bank ranking order. Please let us know if there are any other changes that we need to make for the house bank to be be picked automatically ????
Thank you
Gayani

Hi,
Please try to maintain bank detail in vendor master and if bank details are not maintained while posting than APP will not pick the house bank and bank account.
Now, you can add the bank detail in vendor master for future invoice posting, bank detail will be picked by APP in future runs. For current open item you need to use mass update for line items.
Regards,
Anand Raichura

'Move order pick slip report' Report not picking XML publisher Template.

Hi,
SUB: i have to create one XML report on .RDF(move order pick slip report).
Submitting procedure move order pick slip report : i have created one Discrete Job and released that Job, then Component pick release for that particular job. then move order number will generates. then automatically fires the 'Move Order Pick Slip' Report.
NOTE: what i meant to say is i am not submitting the report from SRS window. it will fires automatically when Component pick release.
For this i have taken .xml and generated .rtf according to my layout and i have registered with XML publisher also.it is correct . But while running the report i am geting output as XML codes not in template(wht i have .rtf) format.
if i have to see the output in template from. (i have taken in conc program output as XML also) still same problem.
please help me if anybody having solutions.
Thanks
Valli

Hi Valli,
1:The first thing i would suggest that please check the BI Publisher version you are using (on apps/and on template builder also).
2: In any case if your report is not picking up the template and generating the xml output , i suggest you to attach one program "XML Report Publisher" in your SRS.
Oncwe you run your report and its generate the xml output. you have to take the request id & from view ---> submit request--->XML Report Publisher. run this request again.
it will ask for the request id , select the appropriate request id and it will generate the pdf output as per your requirement.
But this is temporary solution , i strongly recommend you to check the updated version of BI Publisher and instaal it on your oracle apps instance. also use the updated version of bi publisher for Layout(Template Builder).
Regards
SRatnesh

NFS Adapter not picking up file

Hi Guru's,
Scenario is File(NFS) to File(FTP) without using repository part.
The NFS directory name has been maintained correctly. File name is also correct. Channel is active. Checked in RWB also.
All configuration settings are fine. But NFS adapter is not picking up the file and also not showing any error.
Tried following thing but not working
1) Manually deactivating and activating channel in Directory.
2) Stop start channel in Communication channel monitoring.
3) Put exact file name in Communication channel.
4) Testing mode changed from Delete to Test and again test to delete.
5) File type binary to text.

Hello,
Verify the below mentioned points:
a. Is the file adapter locked? ....Visual Admin (till PI7.0) or NWA(for PI7.1 and above) . Entry comes as $XIAdapter*
b. Check permission / authorization to read/ delete the file?
c. Adapter Services are active
-Rahul

Workflow not picking in the agent

Hi SRM Experts,
We are doing an SSp implementation on SRM50. Here we are stuck with the workflow for shopping cart approval. We have done all the settings including the event linkage activation and agent determination.
But here the workflow works fine if we manually assign the agent. otherwise it is not picking up the agent and it shows'Adhoc Agent not found'. What could be the reason for the same. Please suggest.
Thanks & Best Regards
Raj

please check wether the start conditions for the workflow are active
at the following location
transaction --> SPRO --> Supplier Relationship Management --->SRM Server ---> Cross Application Basic Settings ---> SAP Business Workflow --> Define conditions for starting workflows.
which workflow are you using?
1) one step
2) two step
3) N- STep
>
Further to the above please check wether the manager has been maintained for the requestor in ppoma_bbp.
In the case of classic workflows --> managers are determined by the system from org structure.
Edited by: khan voyalpad usman on Feb 21, 2008 8:39 PM

HT4796 iPhoto did not pick up the photos I migrated. What can I do?

my migrated photos were not picked up by iPhoto, and I can't find them. How do I get them?

If you used Migration Assistant to transfer your pictures from a PC, it's normal that you don't see them in iPhoto. Also, Migration Assistant creates a new user with the transferred data, so open  > Log Out, and log in the new user. Then, open iPhoto and drag all the pictures from Pictures folder (if they were there in the PC) to iPhoto

Absence days not picked up in PARX and PARTA

Similar Messages

Maybe you are looking for