Absence Management set-up Documentation

Hello,
Can anyone share any documentation about absence management. We wanted to start using this functionality. Any help is greatly appreciated.

You can look at the following sources. If you know the basics of absences, suggest going through the PTO FAQ first, otherwise go through the comp and ben guide first.
1. PTO FAQ -
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5911870172542922414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,146730.1,1,1,1,helvetica
2. Oracle HRMS Compensation and Benefits Management Guide -> Chapter 4 : Leave and Absence Management
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115hrcbug.zip
The link is for the generic one, choose the one for your legislation from the apps documentation.
http://download.oracle.com/docs/cd/B25516_18/current/html/docset.html
Some additional metalink notes for quick references
3. How Do You Set Up an Accrual Plan for HR-Only?
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5911870172542922414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,1064687.6,1,1,1,helvetica
4. How Does the PTO Carryover and Accrual Balance Work?
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5911870172542922414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,734240.1,1,1,1,helvetica
Hope that helps. Post any specific questions.

Similar Messages

Power Manager Setting To Preserve Battery Life When Using A Docking Station

I have a Lenovo Thinkpad X220 which is about 19 months old. When at work, the computer is in a Lenovo docking station. At the end of the day, it is removed and any further evening use is typically on the battery.
Yesterday, the battery symbol in the tray at the bottom of the screen displayed a red X on it and indicated that there was an "error". I presume from this that that battery is dead and needs to be replaced. I am surprised by the comparatively short life of this battery.
I was thinking that perhaps the use of the powered docking station played some role in shortening the battery's life. For example, it may have repeatedly overcharged the battery.
Is there a Power Manager setting that will reduce the likelihood that the battery is being overcharged while in the docking station? In the future, is it feasible to simply remove the battery before inserting it into the docking station so that this won't continue to occur?
Thank you.
(I did a search of the community's knowledgebase, but didn't find anything on point.)

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that battery of your Lenovo ThinkPad X220 had undergone wear and tear and has to be replaced.
Capacity of a battery declines as the battery ages, with the number of charge cycles and time at high temperature. Under average usage patterns your battery maintains approximately 70% of its power capacity after the first year of operation.
Most laptops today use lithium Ion (Li-ion) batteries. Overcharging Li-ion batteries is not a problem and does not affect the battery life span. These batteries have an internal circuit to stop the charging process at full charge. This is why the Li-ion batteries are more expensive. The only way for the Li-ion battery to overcharge is if the charging system malfunctions, and then the battery will heat up while in the charger. Older laptops use Nickel-cadmium (Ni-Cd) and Nickel Metal Hydride (Ni-MH) batteries. They require more maintenance than Lithium Ion batteries. They must be fully discharged and then fully recharged so that they don't lose battery life.
Refer this document to see the tips on how to increase the battery life.
Hope this provided enough clarity for your query!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Color management setting wont stay set?

Running Acrobat Pro 9.4.1 in conjunction with CS5 Design Premium. Not only does the color management setting in Acrobat not change when set and synced from Bridge. The setting wont stick when set directly in Acrobat. Does anybody have a similar issue or a solution? I run Europe prepress 3 in bridge which has no effect on Acrobat but if I select Europe prepress 3 directly in Acrobat it will stay on that setting until I quit Acrobat then when re-launched it will be set to Europe Prepress 2! Any help or explanation much appreciated.

Guys I appreciate your help but nothing is working.
I tried deleting the preferences file and the same thing happened again anyway.
I then uninstalled the whole Creative Suite and deleted all files associated with it and all entries in the Windows Registry related to it.
I then reinstalled everything ( spending the hours it took) and it is doing the same thing again. I can not think of anything that has changed on the machine at all and I have never had this happen before in the years I have been using Premiere.
Everything used to work fine and Captures would go without a hitch even if they took hours as long as the Preferences were set to “None” on Device Control. But now it just won’t stay set, even after reinstalling everything. The Capture Window Device Control will stay set to “none” but not Preferences regardless of what I do.
I tried changing other Preference Settings and they stay changed but not device control. And it is the same regardless of whether the ADVC-300 is on or off. I even tried deactivating the Firewire Port in the Bios just to see what would happen and it made no difference.
Does anyone have any ideas?
My last option is to reformat my drive and reinstall everything from scratch but that will take me a day and a half.
I can not understand what is making it do this when it never did it before.
Here is what I am using:
Premiere Pro CS4 with a Canopus ADVC-300 Capture Box. It is installed via Firewire and goes to the Firewire Port on the Motherboard.
I am using XP Home SP3 on a Core I7 Computer with an Asus motherboard.
If no one has any ideas do me one favor. Go into your own Preferences file and set Device Control to “None”, close the panel and open it again to see if it is still set to none.
It may help me feel a little better about reinstalling all my software and spending the day and a half doing it if I know it is something with my machine and not the program itself.

How to get the iPhone to remember the "manually manage" setting?

The first time I plugged in my iPhone, I set it to "manually manage" under options. I am attempting to sync my iPhone to the same computer each time, but each time I plug in my iPhone, it forgets the "manually manage" setting. If I go to click the manually manage setting again, it wants to "erase and sync". I have done the "erase and sync" on the phone twice now and don't want to do it again - it is laborious to set up the library and playlists and podcasts over and over again. When I plug it in, despite having set the manually manage last time I sync'd, it won't let me drag anything into the iPhone (the iPhone music and podcast libraries are greyed out, and the manually manage checkbox under options is not checked).
How can I make iTunes remember the "manually manage" setting so I don't have to resync the entire library each and every time?

Hi Elisabeth,
A couple of things you could try that might help out.
First try resetting the iphone by holding down the power button on top of the iphone and the home button at the same time until you see just an apple logo. Then try connecting to itunes and setting the manually manage.
If that does not work something might have become corrupted on the iphone and you can try a restore. This will completely erase the iphone and set it back to factory defaults. If you choose the restore option, after the restore you will see an option the restore from back up. Don't restore from back up, instead choose set up as new iphone. This way if any thing was corrupted previously to restoring the iphone you won't run the risk of putting it back on the iphone. Then you will se a page asking if you want to sync all music, video,... Make sure to uncheck this box since you are trying to set the iphone to manually manage.
Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414
Hope this helps.

Performance Manager - Set Analysis

Hi
I am getting an error with BO Performance Manager - Set Analysis. I have created few sets (20) by logging in as a user. After that when i try to create new Sets - I am getting an error "0300-0101 Sets Cache Error : Maximum Number of Sets created for this User".
But when i login as a admin user/any other user I am able to create new Sets.
Please suggest.
Thanks
Aruna

Hi the soultion is simple log into Set Analyzer Architect go to Security then Profiles Select the User by Double Clicking the username Select the Limits Tab and change the maximum number of sets Save and close all done!

OTL Absence Management Integration Issues

We are planning to implement OTL integration with Absence Management. We want to capture unit as DAYS and would like to capture half day leave as well. We applied for half day leave (0.5) in Absence Management, when reviewing the information from OTL, it is appearing as 1 instead of 0.5. OTL does not support absences in half days, it supports only in FULL days.
Has anyone come across this situation? Your inputs are really appreciated.
Best Regards
Gupta Nagubandi

Hello,
There is an Enhancement Request that was logged for that requirement:
Bug 14042699 - NEEDS TO ENTER DECIMAL VALUES IN THE TIMECARD WHEN USING DAY INPUT VALUE
This ER is logged, here in the Community. Development is tracking all voting and customer comments related to this ER and will take your ideas and requests under consideration.
By Voting for this ER your information will be tied to the ER, so there is no longer a need to be attached to a bug. We understand this is a new way of working and capturing information,
and we hope you will find it more beneficial to know what ERs are being logged by customers and how many customers in fact are seeking out the same improvements as you.
This issue has been identified as an Enhancement Request. We are excited to share with you that we now have an Enhancement Request Community in Service. All customers can now
log new Enhancement Requests via this channel and track the progress. This community will give visibility to current recommendations and allow others to collaborate, discuss, and vote
on existing requests. This part of the community is owned and maintained by Oracle Development.
We also encourage you in the future to log the ER directly as the thread will be tied to your 'My Oracle Support Username', which will allow development to communicate with you directly
should they have any questions or need clarifications. Also, by creating the thread yourself you will automatically be notified by email on any replies to the discussion. This will allow you
to track the progress of the recommendation.
Please follow these steps:
    Navigate to the Service Community via the URL: https://community.oracle.com/community/support/oracle_e-business_suite/service
    Reference the Your Ideas Count!template to help ensure you log a complete idea. https://community.oracle.com/docs/DOC-892134
    Select "Create an Idea" at the right of the Community Screen
    Add the Subject for the Enhancement Request. It would be recommended to make this as generic as possible, but summarizing the issue in a one-liner at the same time
    Include in the content region the details of what you are requesting and why. It is best to give as much detail as you can to help others customers understand the request so they can vote
    on the ER if they also find it     desirable. This detail will also help development with their review and consideration.
    For more information about this community, please see the Enhancement Request Community FAQ (Doc ID 1584210.1)
Thank you,
Andrea Minor | Senior Support Engineer
Oracle Global HRMS Support

Recurring Leave in Oracle Absence Management

Hi All,
I have requirement where employee will have recurring leave like every thursday he/she will be off for next 4 months lets say. This thursday can be any other day in next week. Basically 1 day per week. There is proper schedule for employee for his/her leave day in a week. Please let me know how this can be achieved using seeded Oracle absence management functionality.
Please let me know if more details are required.
Cheers,
Sandip Jadhav
[email protected]

Hi Vignesh,
We are capturing this data in schedule management system(Not Oracle CAC).
They want to create absence also for such leaves And they do not want employee to enter multiple times.
I am thinking of using EITs and Absence Attendance API to create multiple absences.
Other approach we are discussing is create user friendly OAF page for only this type of leave entry.We have one .net based leave management system which internally calls oracle leave sshr page. So for this type of leave we will call either custom web page or EIT page.
Please let me know your views.
Cheer,
Sandip Jadhav
[email protected]

Manage set in SAP SRM

Hi all,
in SAP ERP, with transactions GS01,GS02,GS03 I can manage set...are ther similar transactions in SAP SRM to do the same?
Thanks very much,
Best Regards,
Maria

Hello Maria,
I am trying to exploer the possility of maintaing set similar to one in ERP GS01 or GS03.
Were you able to get this to work using SRM.
Regards

Absence Management-Annual Leave CarryOver

Hi,
I have a single BG with multiple companies, the requirement is, in absence Management- Annual Leave carryforward is different for different companies.
For one of the companies the maximum carry over is 60 days and other company there is no limit for the carry overs.Employees can carry any number of leaves.
Can i achieve the requirement. Appreciate your reply.
Regards,

For one accrual plan there is only one carry over formula.
You have to handle multiple conditions to satisfy the different companies carryover policies in same Carry Over Formula.
Thanks

FDMEE version 11.1.2.3 not dispaying options in Data Management- Set up

Hello Experts,
I am in the process of creating the Hyperion Financial Close Management (FCM) application, particularly Accounts Reconciliation Manager (ARM) version 11.1.2.3 on Windows Server 2008 R2, 64-bit Operating System (RAM is 30GB).
Now in order to perform all the data related activities on ARM, I am using FDMEE but I am not seeing the “System Settings” tab when I go to Workspace->Navigate->Administer->Data Management->Set up.
All I am seeing is the “Security Settings” tab and no "System Settings" tab.
So need your help in finding out what is that I am missing out here.
Let me know in case you need any additional information from my side.
Thanks in advance.
Regards,
Sumit

Hi Jeff,
Yes I am provisioned as an administrator for FDMEE in shared services.
Still I am not seeing the "System Settings" option.
Please suggest as what am I doing wrong.

HT1414 I am new on the iPod 5th Gen, I have managed setting up ok, I can send emails via Mail but cannot seem to receive them ? help what am I doing wrong

I am new on the iPod 5th Gen, I have managed setting up ok, I can send emails via Mail but cannot seem to receive them ? help what am I doing wrong

Try this...
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.

Restricting absences in the absence type dropdown in Absence Management

Hi friends,
How can I restrict the absence types in the absence type dropdown in the Absence Management. Also can we change how the days are calculated when the "Calculate Duration" button is pressed.
Kindly let me know any ideas so that I can try.
Thanks in Advance

For LOV restriction -
How To Restrict Absence Type LOV in Oracle Self-Service Human Resources (Doc ID 1122674.1)
For calculate duration -
https://forums.oracle.com/message/10752228#10752228
https://forums.oracle.com/message/10460289#10460289
Cheers,
Vignesh

Copyright Management setting

I have a DVD project that I am making duplications of on my own duplication tower but I do not want others to make copies from my duplications. I tried setting the Copyright Management setting to 'No Copy Permitted' but when I made a copy from the duplicated disc, the copy played just fine. So I'm not sure what the use of setting it to 'No Copy Permitted' if I can make playable copies from the duplications.
I read up on this in the DVDSP3 User's Manual. It does not seem to indicate that I need to set a 'Macrovision' type or click on 'Format to CSS' for this to work.
Am I missing something here?

The copy management only really works on replicated discs and not duplicated ones. You'll ideally set this up with the bureau and send them DLT masters with the copyright management flags set up from DVDSP.

Oracle SSHR (Absence Management) Error - ORA-01436: CONNECT BY LOOP

The following error message is displayed in Absence Review Page while creating a Leave of Absence for some employees, while working propoerly (withpout any error) for other employees,
"An Invalid Setup has been detected for the current Transaction Type in Approvals Management. Please contact your System Administrator."
Please note that I checked the Supervisory chain through the follwoing query and it shows data properly without any endless loop,
SELECT levels, ppf.full_name, ppf.Employee_number
FROM per_all_people_f ppf,
(SELECT level levels, paf.person_id
FROM per_all_assignments_f paf START WITH paf.person_id = &person_id
AND paf.primary_flag = 'Y'
AND SYSDATE BETWEEN paf.effective_start_date
AND paf.effective_end_date CONNECT BY PRIOR paf.supervisor_id = paf.person_id
AND paf.primary_flag = 'Y'
AND SYSDATE BETWEEN paf.effective_start_date
AND paf.effective_end_date ORDER BY LEVEL) paf
WHERE ppf.person_id = paf.person_id
AND SYSDATE BETWEEN ppf.effective_start_date
AND ppf.effective_end_date
ORDER BY levels
further it may please be noted that we have currently set a singly level for approval (testing purposes).
Any help to resolve this issue shall be highly appriciable.
Regards,
Nahidullah Khan

Please also see the following docs.
Invalid Setup Has Been Detected For The Current Transaction Type In Approvals Management [ID 1313961.1]
An Invalid Setup has been detected for the current Transaction Type in Approvals Management. [ID 602920.1]
An Invalid Setup Has Been Detected For The Current Transaction Type In Approvals Management. ORA-06502: PL/SQL: numeric or value error: Character string buffer too small [ID 1458422.1
An Invalid setup has been detected for the current transaction type [ID 1300417.1]
Connect By Loop Problem in Supervisor Hierarchy [ID 579750.1]
Initiating A Transaction That Goes For Approval Fails With ORA-06502 [ID 795063.1]
Thanks,
Hussein

Absence management/substition rules for workflows in UI5

Hi,
we would like to set the substition rules for the workflows in UI5 because some users don't use the SAPGUI but UI5 and need to maintain the substitution in case of planned absences (and maybe also in general) in case of an unplanned absence.
Therefore we are searching for the possibility to set the substition rule for the workflows within an UI5 application. Does ist already exist (maybe as Fiori app) or are there any NW GW services like WFService that support this as a good starting point for our development?
Regards, Vanessa

Hi,
Set substitution app is included in My Inbox (Wave 7), for more details please check
Solving the workflow inbox clutter - Manage all your workflow tasks in SAP Fiori

Absence Management set-up Documentation

Similar Messages

Maybe you are looking for