Absence quota 31 cant be accrued by time evaluation

Hi
while i run tim evaluation i get error like absence quota 31 cant be accrued by time evaluation,i configured generation rules & also written rule to update quota 31.Any suggestions where i went wrong??how to correct this error??
Thanks&best regds
Shaila

Hi
Actually i had written sub schema for this..bcoz this URL is eligible for those employees who are Cash processing officer & also based on personnel area we have to check wheter particular employee is Cash processing officer or nt if yes then only update 1day URL to 2006 IT, if the employee is working on Public holiday..for updating i had written this PCR..ZMN1 Public holiday indicator(timetype), 31 is my quota group.
HRS=1
varstprsnt
N
Y
HRS=DZMN1
ADDDBZMN1
UPDTQ31

Similar Messages

Absence quota generation with PCR in Time Evaluation

Dear All,
I am generation absence quota Annual leave = 50 through PT60- ZM04. Its daily calculation and transfered at the month end.
The quota entitlement is 30 days per year.
I have written this pcr. Have configured a time type too. but not sure why its not generating any quota.
The time type I have configured is:
Time Type: 0097
Save as day balance - No Formation
Save as period balance - 1
Store for time accounts - 1
Have assigned the time type 0097 in Base entitlement for Absence quota generation as Day Balance and even in generation rules.
Have placed the PCR with ACTIO Z003 before CUMBT fucntion.
The PCR Z003 is:
000010 D HRS?0
000020 *
000030 = D OUTAQTYP
000040 = **
000050 = 50 Z GCY ZQTY
PCR ZQTY is:
000010 D OUTWPMOLGA
000020 **
000030 99 HRS=FR50C ADDDB0097Z ADDDB0097 HRS=D0097
I didnt mention anywhere in configuration or PCR that its 30 days per year.
Do I need to do this?
Have I missed out anything, please help me.
Thanks & regards,
Majid

Hi,
This you can do through config also without using PCR.
Base entitlement is 30 for calender year. Selection rule- Accrual period is daily and transfer time is time evaluation period.
Use appropriate rounding rule in selection rule.
Rgds,
Lata

Error in Generating Absence Quotas.....Time Management

HI All,
WRT TM
1)In the step SE38 using RPTQTA00 i get an error saying Generation rule is not selected for this Personnel Number.
2)If i try doing thru PA61, when i select the Absence quota defined n click create i get the Standard Absence Types rather than the ones i created...
So wat cud be the reason for it,,,,n how to rectify??
Thanx a lot in Advance
Regds
SAP Functional

Hi,
The error is solved wrt SE38 Generating Absence Quotas,but the output window displays the quotas i have defined as well as the standard leave(system default) which i hav not defined and the quotas are displaying multiple times i.e the sick leave is displaying 7 times n paid leave is displaying 8 times.
So the total for Sick leave is 7X7 = 49days and
for paid leave 30X8 = 240 days, n when i select subtotal than i wont get the total numbers instead the quotas get displayed multiple times.
So wats da solution, thanx for the past suggested solutions n for the future ones too.
Regds
SAP functional

Quota generation issue while running time evaluation

Dear Experts,
we are using positive time management ,generally we will generate quota based on number of working days of the employee ,so for counting working days we will add day off and public holidays also ,now quota is generating fine ,but if the employees applies leave in between week off ,then quota is using for the week off also but that day is adding to the working days so quota is generating for that day as well ,please give me some inputs how to exclude that day .it is very urgent,please help me experts .
if employee taken leave from 1st to 15th
calender days -15 days
absence days - 13 days
Quota Used -15 days
in this case the absence days should be 15 days

When you mention Absence Days as 13, this is what you see in 2001 screen. You cannot change this as SAP calculates the absence days as those which are working days.
When it comes to your PCR where you are counting WOFF and PH to generate quota you will need to query the absence type and include/exclude the leave types based on your business logic. If you can share the PCR which is used for generating quota, maybe it will give us a clue.
Regards
Pramod

Absence Quota In Time Evaluation

Hi,
I am working on Absences,i done the configaration part for abxebnce quota and i excute the report RPTQTA00.Its working fine for all Absence QTs.
But while i am running the PT60 its displaying only one Absence QT. I need to see the all the Absences QTs for that Ee.
Can U any body help me Hw to See the all Abs. QTs of that Ee.
Thanks In Advance
Swarupa

Hi
Executing RPTQTA00 and Time Evaluation are two different concept of Quota Generation. You have to executed RPTQTA00 before than Time Evaluation for Ee then you can see all the Absence quotas via time evaluation.
Once you execute time evaluation you can do the following :
click any of the date then click Manage Time Account > Quota > ABWKONTI.
In ABWKONTI you will see those quotas, which you generated via RPTQTA00 (but depends upon the Selection rule you've customized in V_T559L) and the till date Quota Generation for those Absences for which you put the button on Increase.
e.g., Ee DOJ 01.01.2008, you run RPTQTA00 on 01.01.2008 and CL and SL gets generated as follows :
CL Quota - 01.01.2008 to 31.12.2008
SL Quota - 01.01.2008 to 31.12.2008
After this you are executing Time Evaluation and you client execute time evaluation on daily basis. so when you run time evaluation on 01.01.2008 system will check the increase button in customization of Time Evaluation and credited the Quota depending upon the customization u've did in V_T559L (like you want to accrue Ee quota on a daily basis or calendar year.) so system reflects everyday quota for such absences in the log you can view these daily generated quotas in various sections of Time Evaluation.
hope it suffice
Regards
Pradeep

Use of Time Evaluation to generate Absence Quota

Hi,
We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
Any comments/suggestion/advise will be very helpful to us.
Thanks.
Sujit

We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
Thank you so much for the response.

Absence Quota Carried Forward to Next Year

Hi All
hope you are doing well. I was looping around for carry forward remaining absence quota from one year to next year
Requirement:
Absence Quota for 20 days generated from 01.01.2012 to 31,12.2012, deducted 4 days on december 2012
but absence quota to next year i.e from 01.01.2013 to 31.12.2013 is showing as 20 wherein actual should be 16
Followed Woods documents at Carry Forward Absence Quota but failed
Configuration of Time Types, PCR and Schemas as folows, request your kind attention at earliest as its business critical
Configured a constant at T511k
Created two time types
For Quota
For carry forward
PCR as follows
Schema
Request your kind attention on the same, helpful/ right answers will be rewarded with points
BR
Anil
Message was edited by: Sikindar A

Hi Anil,
I just had a quick look at the PCRs and I think some things are wrong.
First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
Until here you will have remain part of quota at last day of last month in time type 0904.
Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
I don't understand what ZCFT is for!
Regards,
Omid

How to Update Absence Quota with Time Evaluation

Dear Friends,
I would like to know how do we update absence quota within time evaluation. Currently i'm using UPDTQAXX, it works but when i search this forum everybody was using this simple code:
HRS=something
ADDDBxxxx
and the quota is updated. I just dont get it, with adddb its only update the daily balance table, how does that enable us to updated the 2006 infotype? Many Thanks

ADDDBxxxx adds the value of the number of hours field to the specified time type in the table of day balances (TES), it does not update the quota.
You can use function QUOTA to accrue absence entitlements periodically based on this customizing: Personnel Time Management>Time Data Recording and Administration>Managing Time
Accounts Using Attendance/Absence Quotas>Calculating Absence Entitlements>Rules for
Generating Absence Quotas>Define Generation Rules for Quota Selection.
You can use a time type to prorate that accrual

Not able to generate the absence quota WITHOUT Time Evaluation

Hi ALL,
When i try to generate the absences quota for employees without time evaluation using program RPTQTA00, I am not able to generate it.
And i am getting "E You have not selected any generation rules".
Kindly if any one come across this issue please throw some light and do a favour.
thanks all

Hi,
Pls check the follwing tables if u have made correct assignments
v_t559l
v_554s
v_556c
Check Quoma Feature
Check what status u selected in IT7
Check if ur using correct Schema
If ur Using RPTQTA00 then use No Generation,and if ur using PT60/RPTIME00 change it to Increase.
Check if u have maintained correct quota groupings.
Revert back if its not solved
Regards

Absence Quota creation during Time evaluation - Orgnaisational Assg change

Hello Experts,
I have one emplyee for whom the Transfer action has been run - his personal subarea has been changed from 1633 to 1654
obviously the ps grouping for time quota type changed form 35 to 40.
so function QUOTA is creating different quota for this employee than what there exist right now for infotype 2006.
so during time evaluation below error is comming.
    Error entry no. 83 Error when creating absence quota
    A complex application error has occurred
Kindly let me know how to overcome this error.
Thanks Jay

The reason 'error no. 83' occurs in RPTIME00 is because function QUOTA
is trying to generate a quota type which does not exist for the employee
on a specific day. It must have existed some time before. Normally,
the function QUOTA displays an error message concerning the
non-existing quota types. In this case, the 'error no. 83' can only
occur in the following scenarios:
1. If you deleted a quota type that was to be generated
2. If an employee has an organizational reassignment to a personnel
   subarea or employee subgroup which have different groupings for quota
   types and for these groupings the 'old' quota type does not exist.
Function QUOTA checks to determine if the quota types to be generated
are valid. If the quota type is not valid anymore (see reason 2) then
you will get a warning message.
"the problem in these situations was the following:
RPTIME00 is trying to generate a quota for a validity interval
(defined in table T559D) during which the employee belongs to two
different groupings, due to the transfer.
In your case the quota type should be generated with a validity interval
that begins before the employee's organizational change.
Unfortunately, for the time between the validity begin up to the
transfer of the employee there is no entry in table T556A for this quota
type.
or check the config of this quota running Rptquota_check in se38
Therefore, it is possible to solve the problem by defining a dummy
quota type for the 'old' groupings of the employee (table T556A).

Absence quota addition after Time Evaluation

Hi Experts,
This is regarding Time Evaluation.
Time Evaluation Configuration is fine. Absence quota is getting generated in days.
But while adding to the previous balance it's treated as hours and the net balance is coming as hours.
Example, Absence quota from previous year = 15 hrs
Quota generated = 0.77 days
After generation the total is 15 + 0.77 = 15.77 hours.
Please advise what could be the problem . Thanks

Hi ,
Thanks for your reply.
Cause :
Actually the employee had moved from one Personnel area to another but due to the settings same Absence quota was applicable to the employees in both cases.
Now i am not able to delimit the record in 2006 from transfer date.
Edited by: Tomesh Sahu on Jul 21, 2009 10:17 AM

Absence Quota Change ( Without Time Evaluation )-Change in Holiday Calendar

Hi Experts, We have scenario where we need to change the holiday calendar. Add additional holiday. This can be done through SCAL and after that we can generate work schedule through PT01 for the month where the holiday is added. We are not using time evaluation. Our time manangement status is 0 in IT0007. The input I require is how to correct the absence quotas of employees for which they have applied leave for the period where the new given holiday is created. Please advise. Thanks in advance. Regards, IFF

Hi,
Standard SAP provides TCode PT_UPD00 for this purpose. It calls program RPTUPD00 which creates a batch input session for revaluating absence and attendance records. You can use this program to resave all the leaves which overlap the given date which is now a public holiday.
I hope this information is helpful for you and resolves your query.
Thanks and regards,
Vivek Barnwal

Absence quota zero after Time Evaluation

Dear friends,
We are generating Absence quota automatically after Time evaluation. But CL/PL/SL leave quota generated is zero after TE.
Even I am not able to edit Absence quota(IT2006) manually or through IT2013.
Please guide me, what needs to be done.
Regards,
Nayak

Hi Dracula,
Thanks for your response. No am not able to simulate the situation, it happen just once in PRD server.
I do agree that some one might have chaned the value. But if the quota is generated by time evaluation then you cannot changed the record directly in infotype (2006). Time evaluation generated quota can be changed on through infotype 2013.
I do request all the expert please share your thoughts. Please do let me know what could be the problem here.
Regards
Sandeep

Absence quota should not get generate in Time Evaluation

Hi All,
For some employees we lock the payroll. But whenever we run the time evaluation every month employees who are under lock payroll their absence quota is getting generated every month. It should not happen..
Please provide solution for this....
Regards,
Sita

Hi,
Due to some reasons some employees payroll data was stopped for payment. for this they delimited in infotype 0001 start date and payroll area to 90 ie. stop payment.
So whenever they run time evaluation every month through payroll area wise the employees who are under stop ment their quota is also getting generated. How to stop generating quota?
Regards,
Sita

How to change the date generate absence quota(Time Evaluation)

Hi all experts,
Currently system use Time Evaluation, and generate absece quota in last day of month.
So any way to change that system will use differ day to generate absence quota?
Example use day 28 of each month will generate absence quota? Have any enhacement or configuration?
Thank you,

Tatsuya,
there 2 better solutions for this, one is Generate Period Parameters and according accordingly the month end date you follow and use the same period parameter in V_T559L table to your Quota.
and other Solutions is Write a PCR like Below.
ABCD     (PCR Name)
   varstcrumo
        Varstreday
             28
               hrs=1
               adddbTIME (TIME - Daily Time type - Create it in V_t555a table)
Save it and go to TM04 Schema, and put this PCR with Function ACTIO and make sure to insert this before QUOTA Function and Before CUMBT. and save it, and dont forget to put TIME Time to your Base entitlement.
you can run Time Evaluation to test it...let me know how it worked.

Absence quota 31 cant be accrued by time evaluation

Similar Messages

Maybe you are looking for