Absence quota changed to 0

Hi,
we generate the absence quota through time evaluation. but after executing the time evaluation absence quota of EL lchanged to ZERO. How ever it has been corrected after executing the time evaluation once again.
I just wanted to know, how it has changed to zero? is there any bug in the application or there some other reasons.
Please let me know what could be reasons.
Regards
Sandeep

Hi Dracula,
Thanks for your response. No am not able to simulate the situation, it happen just once in PRD server.
I do agree that some one might have chaned the value. But if the quota is generated by time evaluation then you cannot changed the record directly in infotype (2006). Time evaluation generated quota can be changed on through infotype 2013.
I do request all the expert please share your thoughts. Please do let me know what could be the problem here.
Regards
Sandeep

Similar Messages

Absence Quota Change ( Without Time Evaluation )-Change in Holiday Calendar

Hi Experts, We have scenario where we need to change the holiday calendar. Add additional holiday. This can be done through SCAL and after that we can generate work schedule through PT01 for the month where the holiday is added. We are not using time evaluation. Our time manangement status is 0 in IT0007. The input I require is how to correct the absence quotas of employees for which they have applied leave for the period where the new given holiday is created. Please advise. Thanks in advance. Regards, IFF

Hi,
Standard SAP provides TCode PT_UPD00 for this purpose. It calls program RPTUPD00 which creates a batch input session for revaluating absence and attendance records. You can use this program to resave all the leaves which overlap the given date which is now a public holiday.
I hope this information is helpful for you and resolves your query.
Thanks and regards,
Vivek Barnwal

How to change generation date of absence quota with Time Evaluation methos

Hi all,
IS there any way to change generation date when TIme Evulation generate absence quota?
Currently system will use last day of month as generation date, Validity and Duduction period set correctly.
Base entitlement relate with Monthly,
Accrual period setting in selection rule is Month
Example: system generation absence quota in PT60 with 1 day Normal Leave Entry date 31.06.2011
Valid from 01.06.2011 to 31.12.2012 ; Deduction from 01.06.2011 to 29.02.2012 (extras 2 month)
Can we change ENtry date to 28.06.2011 , because in the last day of month they did not yet have quota but they need it for advance (approver from his/her Manager) ...
Thanks,
R1V

Hi,
The best way i think is to have negative deductions for the quota.
This time as it is on 28 you want to push it to 2 days earlier and later if there is another person with a day as 25, you need to again change the generation date isnt it.
Instead, if you have the negative deductions, you need not worry about the generation date.
Hope this helps.
Cheers,
LG

Absence Quota creation during Time evaluation - Orgnaisational Assg change

Hello Experts,
I have one emplyee for whom the Transfer action has been run - his personal subarea has been changed from 1633 to 1654
obviously the ps grouping for time quota type changed form 35 to 40.
so function QUOTA is creating different quota for this employee than what there exist right now for infotype 2006.
so during time evaluation below error is comming.
    Error entry no. 83 Error when creating absence quota
    A complex application error has occurred
Kindly let me know how to overcome this error.
Thanks Jay

The reason 'error no. 83' occurs in RPTIME00 is because function QUOTA
is trying to generate a quota type which does not exist for the employee
on a specific day. It must have existed some time before. Normally,
the function QUOTA displays an error message concerning the
non-existing quota types. In this case, the 'error no. 83' can only
occur in the following scenarios:
1. If you deleted a quota type that was to be generated
2. If an employee has an organizational reassignment to a personnel
   subarea or employee subgroup which have different groupings for quota
   types and for these groupings the 'old' quota type does not exist.
Function QUOTA checks to determine if the quota types to be generated
are valid. If the quota type is not valid anymore (see reason 2) then
you will get a warning message.
"the problem in these situations was the following:
RPTIME00 is trying to generate a quota for a validity interval
(defined in table T559D) during which the employee belongs to two
different groupings, due to the transfer.
In your case the quota type should be generated with a validity interval
that begins before the employee's organizational change.
Unfortunately, for the time between the validity begin up to the
transfer of the employee there is no entry in table T556A for this quota
type.
or check the config of this quota running Rptquota_check in se38
Therefore, it is possible to solve the problem by defining a dummy
quota type for the 'old' groupings of the employee (table T556A).

How to change the date generate absence quota(Time Evaluation)

Hi all experts,
Currently system use Time Evaluation, and generate absece quota in last day of month.
So any way to change that system will use differ day to generate absence quota?
Example use day 28 of each month will generate absence quota? Have any enhacement or configuration?
Thank you,

Tatsuya,
there 2 better solutions for this, one is Generate Period Parameters and according accordingly the month end date you follow and use the same period parameter in V_T559L table to your Quota.
and other Solutions is Write a PCR like Below.
ABCD     (PCR Name)
   varstcrumo
        Varstreday
             28
               hrs=1
               adddbTIME (TIME - Daily Time type - Create it in V_t555a table)
Save it and go to TM04 Schema, and put this PCR with Function ACTIO and make sure to insert this before QUOTA Function and Before CUMBT. and save it, and dont forget to put TIME Time to your Base entitlement.
you can run Time Evaluation to test it...let me know how it worked.

Delete or change the absence quota

Hi Friends
Is it possible to delete or change the absence quota and absence
after running the payroll...
our scenario is suppose an employee applied leave on jan ....but he didnt take that leave ..without correcting that leave payroll is run for jan..whether it is possible to correct it in Feb ?
If yes how
pls guide me
Regards
lsp

Hi,
You can't delet the entry if any quota deduction.
for that you have to delet it from 2001 then automatically it will be deduct from 2006.
In your case. you had made some deduction in Jan. you want to give it back to the emp. You can change the quota number (increase to 1) or else delet from 2001. nothing will happen. only retro will run.
anyway that is paid leave. so wages will not be changed.
Kumar

Use of Time Evaluation to generate Absence Quota

Hi,
We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
Any comments/suggestion/advise will be very helpful to us.
Thanks.
Sujit

We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
Thank you so much for the response.

Absence Quota Accruals from days to hrs

Hi Guys,
I need to change the Absence Quota Accruals process in SAP ERP ECC 6.0 system from Accruing time in days to hours. All necessary configuration changes are to be made in the development system (including Time and Payroll Schema changes for absence quota accrual, year-end transfer of unused balance and payout) and upon approval be transported and tested to the Quality Assurance system and Production. All past historic/archive transactions and records must be changed and reflect the absence quotas in hours.
Pls. let me know the steps for doing the same.
Tnx
SKR

Go to the table V_T556A and change days to hours for your quota.
Ccheck the deduction rule attached to the absence(which is related to quota) and change the units to hours.
You may have to run the time evaluation in the update mode from the retro date (past date).But I wouldn't suggest you to run the time eval from the past date untill it is tested regurously in the QA system,because retroing may cause some issues.

Absence days vs payroll days - their implications to absence quota counting

Hi Gurus
Would like to understand why is absence quota deduction based on payroll days instead of absence days?
If there is a scenario in which the officer applied for a leave period which encompasses a Saturday (ws at that time is on alternate saturday), absence days and payroll days stored in IT2001 are the same.
However, if the same officer later backdates a change in work schedule in which his new working hours are from Monday - Friday, the IT2001 records would be recalculated and payroll days for that period with a Saturday would be 0 which is different from the absence day value.
Since so, wouldn't there be cases in which employees overtook leave when in fact they have really consumed the leave?
Thanks.

Hi,
Absence counting is driven by legislation. For example, in some countries leave entitlement is given in calendar days, in others in working days. In general absence days reflect calendar days, and payroll days reflect days that are paid. Obviously depending on legislation (if it gives entitlement in calendar days) absence and payroll days can be the same.
Cheers

Not able to generate the absence quota WITHOUT Time Evaluation

Hi ALL,
When i try to generate the absences quota for employees without time evaluation using program RPTQTA00, I am not able to generate it.
And i am getting "E You have not selected any generation rules".
Kindly if any one come across this issue please throw some light and do a favour.
thanks all

Hi,
Pls check the follwing tables if u have made correct assignments
v_t559l
v_554s
v_556c
Check Quoma Feature
Check what status u selected in IT7
Check if ur using correct Schema
If ur Using RPTQTA00 then use No Generation,and if ur using PT60/RPTIME00 change it to Increase.
Check if u have maintained correct quota groupings.
Revert back if its not solved
Regards

Absence Quota to be generated on basis of Working Day

Hi Experts,
I have got a scenario in Time management ( negative time management, no time evaluation) where the client wants absence quota to be generated on the basis of working days of employee. I have checked the configuration for creating base entitlement V_t559E but the following options are available:
Currently i have done the cofiguration on the basis of Accrual period, leave entitlement is 22 days in a year. Wherein entilement each month is coming to 1.83 leaves, but client wants that in case employee is come for only 5 working days in a month the leave generation should accordingly get prorated and in case of 0 working days in a month there should be no entitlement.
Calendar year
Accrual period
Time evalution period
Payroll period
Other period
Please help.
Regard,
Jyoti

Firstly Update the Period Parameters as per ur dates this has to be done manually T549Q
later generate the Pay Roll Periods useing this Period Paramter
and Change the evaluation Period parameter in T559L to the Period paratmeter which you have generated
a lot of threads has been raised on the same issue please check

Absence quota zero after Time Evaluation

Dear friends,
We are generating Absence quota automatically after Time evaluation. But CL/PL/SL leave quota generated is zero after TE.
Even I am not able to edit Absence quota(IT2006) manually or through IT2013.
Please guide me, what needs to be done.
Regards,
Nayak

Hi Dracula,
Thanks for your response. No am not able to simulate the situation, it happen just once in PRD server.
I do agree that some one might have chaned the value. But if the quota is generated by time evaluation then you cannot changed the record directly in infotype (2006). Time evaluation generated quota can be changed on through infotype 2013.
I do request all the expert please share your thoughts. Please do let me know what could be the problem here.
Regards
Sandeep

Store the vital info from the absence quota record in an internal table

Hi experts,
I want to detrmine if the Absence records (PA2001 rec) deduction from date (PA2001-BEGDA) and absence to date (PA2001-ENDDA) are permissible for the validity period of the Absence Quota record (the PA2006 rec). If the quotas deduction from date, PA2006-DESTA, is greater than the PA2001-BEGDA, we then need to identify this absence quota record for change and change the deduction from date, PA2006-DESTA, to be the same as PA2001-BEGDA. Store the vital info from the absence quota record in an internal table and record the new date that the deduction from date that needs to be changed to. The changes will be made via a BDC session.
Please help me out...
Thanks,
Vicky

This looks possible if we code it in 'dynamic action' table, but the BDC may not read it during run time.
Do you still have this issue?
Thanks
Narasimha

Dump when run Report RPTQTA00 - Generate Absence Quotas

Hi,
I run a report RPTQTA00 - Generate Absence Quotas. when we execute it, a runtime error display.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLHRP3" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPA/FEAT000BIMAP " in
     include "/1PAPA/FEAT000BIMAP " in
    line 0:
    "The program "/1PAPA/FEAT000BIMAP" is not Unicode-compatible, according"
    " to its program attributes."
    The include has been created and last changed by:
    Created by: "DDIC "
    Last changed by: "SAP* "
    Error in the ABAP Application Program
    The current ABAP program "SAPLHRP3" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Pl. help...

thanks dear..
Please let me know, in Object Name, what should i insert...my program name or subroutine name where check of unicode not ticked.
My Program Name -
             RPTQTA00
Subroutine -
                        /1PAPA/FEAT000BIMAP
plz help

Regarding Absence Quotas - SAP Time Management

1. I want to delete absence quota info type (2006) but iam unable to delete that ..
I deleted absence infotype (2001)
Planned working time
I changed absence infotype (2006)
I changed Time constraint from Z to 2 still i couldnt able to delete absence infotype (2006)
It is throwing an error message "Record already deducted (deletion not possible)"...
2. How many times i can execute RPTQTA00 Program?
Suppose I created absence quotas Casual Leave 15 days
if i generate twice it is showing 20 days underneath another 20 days
what would be the reason for that?
3. 2001 infotype is completly blocked I cant enter absence hours in that screen itself locked what would be the reason for that
plz answer immediatly

Entries made manually...
when i configured absence quotas automatically it has shown in absence infotype > 13 casual leaves but i configured 20 it has shown 13 I generated RPTQTA00 it has shown in green colour (13 casual leaves)..
I deleted that absence quota in 2006 infotype which is showing 13 and i entered 20 in place of 13 now when i generate rptqta00 it is showing 13 plus 20 that is 33..
i tested for another employee i updated 20 casual leaves when i ran that program it is showing 20 casual leaves in white colour and 13 leaves which is updated automatically in 2006 before even after deleting that 13eit is showing in green colour
how can i delete green colour data that is showing 13 casual leaves
Now i generated RPTQTA00
what can i do now? Please let me know..
Iam unable to delete absence quotas too? still that error not resolved....
Below are the steps that i followed...
Please check my procedure correctly...
1st Step
I updated 20 casual leaves in absence quotas
2nd step
I entered number of deduction days
3 step
Generated RPTQTA00

Absence quota changed to 0

Similar Messages

Maybe you are looking for