Absence quota generation with PCR in Time Evaluation

Dear All,
I am generation absence quota Annual leave = 50 through PT60- ZM04. Its daily calculation and transfered at the month end.
The quota entitlement is 30 days per year.
I have written this pcr. Have configured a time type too. but not sure why its not generating any quota.
The time type I have configured is:
Time Type: 0097
Save as day balance - No Formation
Save as period balance - 1
Store for time accounts - 1
Have assigned the time type 0097 in Base entitlement for Absence quota generation as Day Balance and even in generation rules.
Have placed the PCR with ACTIO Z003 before CUMBT fucntion.
The PCR Z003 is:
000010 D HRS?0
000020 *
000030 = D OUTAQTYP
000040 = **
000050 = 50 Z GCY ZQTY
PCR ZQTY is:
000010 D OUTWPMOLGA
000020 **
000030 99 HRS=FR50C ADDDB0097Z ADDDB0097 HRS=D0097
I didnt mention anywhere in configuration or PCR that its 30 days per year.
Do I need to do this?
Have I missed out anything, please help me.
Thanks & regards,
Majid

Hi,
This you can do through config also without using PCR.
Base entitlement is 30 for calender year. Selection rule- Accrual period is daily and transfer time is time evaluation period.
Use appropriate rounding rule in selection rule.
Rgds,
Lata

Similar Messages

Quota generation issue while running time evaluation

Dear Experts,
we are using positive time management ,generally we will generate quota based on number of working days of the employee ,so for counting working days we will add day off and public holidays also ,now quota is generating fine ,but if the employees applies leave in between week off ,then quota is using for the week off also but that day is adding to the working days so quota is generating for that day as well ,please give me some inputs how to exclude that day .it is very urgent,please help me experts .
if employee taken leave from 1st to 15th
calender days -15 days
absence days - 13 days
Quota Used -15 days
in this case the absence days should be 15 days

When you mention Absence Days as 13, this is what you see in 2001 screen. You cannot change this as SAP calculates the absence days as those which are working days.
When it comes to your PCR where you are counting WOFF and PH to generate quota you will need to query the absence type and include/exclude the leave types based on your business logic. If you can share the PCR which is used for generating quota, maybe it will give us a clue.
Regards
Pramod

Issue in Absence Quota generation wrt to actions (IT0000);using schema TQTA

Hi
I wanted some clarification on Absence Quota generation through schema-u201CTQTAu201D
The client Scenario is that they want Earned leaves (absence Quota type 0002 and 0003) and Half-Pay leave (Absence Quota 0004) semi-annually.
Whenever an action is run (whether with employee status active or inactive) the absence quota is generated twice:
1.     Last day of previous action
2.     Last day of evaluation period.
Main issue is that when it is reflected in IT-2006 it is summing up the quota generated on both the above said dates.
Also the quota that is generated on the last day of the evaluation period is not prorated but for the entire accrual period.
When the employment status of an action is inactive; the quota is generated upto the last date of previous active action, but if any other action is executed with employee status as u201Cactiveu201D in the same accrual period and time evaluation is run; the quota gets generated again on the last date of accrual period for the entire accrual period i.e. the inactive period is also taken into consideration. Moreover, both the quota generated are added up and displayed in IT-2006.
Kindly advice me the solution for the same.
Thanks and Regards
Parul Jain

Hi
I wanted some clarification on Absence Quota generation through schema-u201CTQTAu201D
The client Scenario is that they want Earned leaves (absence Quota type 0002 and 0003) and Half-Pay leave (Absence Quota 0004) semi-annually.
Whenever an action is run (whether with employee status active or inactive) the absence quota is generated twice:
1.     Last day of previous action
2.     Last day of evaluation period.
Main issue is that when it is reflected in IT-2006 it is summing up the quota generated on both the above said dates.
Also the quota that is generated on the last day of the evaluation period is not prorated but for the entire accrual period.
When the employment status of an action is inactive; the quota is generated upto the last date of previous active action, but if any other action is executed with employee status as u201Cactiveu201D in the same accrual period and time evaluation is run; the quota gets generated again on the last date of accrual period for the entire accrual period i.e. the inactive period is also taken into consideration. Moreover, both the quota generated are added up and displayed in IT-2006.
Kindly advice me the solution for the same.
Thanks and Regards
Parul Jain

Absence Quota Generation begining of Calendar Year

Hello Experts,
Although the said requirment has been already posted in SDN, could not see any solution for this from the threads.
I have a requirment to Generate Absence Quota i.e Annual Leave at the begining of the year, precisely when i run Time Evaluation on 01.01.2011 system should generate the Quota in advance for the Calenday year.
I could generate via Report RPTQTA00 but the same is not happening in TE, even i tried with all Accrual options like Calendar Year, Monthly, Payroll Period, Base Period etc but system picking only the last day of the month or year.
I am wondering if some potential solution would have released from SAP during EHP 4 and 5
Kindly help me with your expertise
thanks
Gita

Hi Vivek,
i am facing the following senio can you please provide and document with pcr. I dint find the solution in SCN so please provide solution ASAP...
I have one senario in TIme management ....
Employee have 1year probation period ,but he is entiteled for taking leave after 1 year . that to leave should be accured for calender years after probation period. & henceforth it should accur per calender year.
For Example: Employee have joined on April 2011 ,Then his leave should be accured after April2012 upto Dec 2012 & then for next year 2013 leave should accure from Jan 2013 to Dec 2013.
Please help me to map the senario with detailed configuration steps
Pls help me out here the requirement is immediate.

Absence Quota generation / Accruals

Hi Gurus,
I am trying to configure Absence Quotas with the below mentioned rules.
1. To be eligible for PTO you must be on the payroll at least 6 months at which time 20 hours of Paid Time Off is granted.
2. In the second year of employment an employee will receive 5.58 hours of PTO per pay period.
3. The accrual rate increases with continued years of service. After 5 years of employment the accrual rate is 7.11 hours per pay period. See the chart below:
Years     PTO Hours
1                  20 Hours
2 - 4            145 Hours       (5.58 hours per pay period)
5+               185 Hours       (7.11 hours per pay period)
A maximum of 240 PTO hours (6 weeks) may be accumulated.
Can you please advise if it's possible to automatically (using Time Evaluation) generate 20 hours of quota in one go after 6 months, and then after 1 year is completed, the quota accrual starts happening every pay period. If it's possible, then please advise me how can this be achieved.
Any kind of help is really appreciated.
Thanks in Advance,
Ashish Maini

Hi,
In table V_T559L you can set up to do the accrual based on a time type and using a rule, you can check based on infotype 41 when to generated it.
Regards
Frederick

Error in Generating Absence Quotas.....Time Management

HI All,
WRT TM
1)In the step SE38 using RPTQTA00 i get an error saying Generation rule is not selected for this Personnel Number.
2)If i try doing thru PA61, when i select the Absence quota defined n click create i get the Standard Absence Types rather than the ones i created...
So wat cud be the reason for it,,,,n how to rectify??
Thanx a lot in Advance
Regds
SAP Functional

Hi,
The error is solved wrt SE38 Generating Absence Quotas,but the output window displays the quotas i have defined as well as the standard leave(system default) which i hav not defined and the quotas are displaying multiple times i.e the sick leave is displaying 7 times n paid leave is displaying 8 times.
So the total for Sick leave is 7X7 = 49days and
for paid leave 30X8 = 240 days, n when i select subtotal than i wont get the total numbers instead the quotas get displayed multiple times.
So wats da solution, thanx for the past suggested solutions n for the future ones too.
Regds
SAP functional

CTM with Inbound Quota..with demand and time split

Hi Experts,
I am trying to use two different quota figures for two different time periods( with no overlap).
Product X at Loc1 is supplied by Vendor1 and Vendor2.
Inbound Quota with Demand Split is used as given below:
A) 1st Jan2011 to 31st Dec2012     Quota for Vendor1= 80   Quota for Vendor1= 20
B) 1st Jan2013 to 31st Dec 2099    Quota for Vendor1= 50   Quota for Vendor1= 50
But CTM considers it as given below.
A) 1st Jan2011 to 31st Dec9999     Quota for Vendor1= 80   Quota for Vendor1= 20
B) 1st Jan2013 to 31st Dec 9999    Quota for Vendor1= 50   Quota for Vendor1= 50
I have two queries....Why CTM is not considering correct time period for Line A? Also why its taking end point as 31st Dec 9999 and not 31st Dec 2099?
Will appeciate your opinion.
Thanks

Hi Sachin
Thanks for the input.
However, this does not solve the issue with decreasing time phased safety stock in combination with multiple demand priorities.
If you run CTM with the settings you mentioned, it will respect the demand priorities, but builds up safety stock when the time phased safety stock is decreasing. (This is a release restriction). According to the documentation available, you should run CTM with the additional settings 'do not plan demand' and 'consider shortage' to overcome this. However, it does not repect the other demand priorities anymore. I tried multiple runs (with use of pegging, with different planning settings), but they all do not lead to the required result.
Edited by: S. Geurds on Nov 17, 2008 1:57 PM

Error in Absences Quota Generation

Dear All,
I have generated absences quota for all the employees. But its generating and showing the same kind of absences in terms of no of days for newly joined employees also. For example if an employee joined on nov for him also Earned leave is generating for the full quota but he is not eligible for the full year of E.L.
How to reslove this.
Thanks and Regards
Suresh.V

Hello Suresh
use the tab allocation of quota based on pro-rata basis - and in quota type selection rule - use "decrese the quota based on inactive days"
and for earned leave - use different quota type selection rule - and use accrual period - for that you have to allocate the qouta on monthly basis (ie based on there presence they will get the leave quota).
Thanks and Regards
Jaydeep Jadhav

Leave Quota generation with diifferent rules for different countries

Hi,
I have the following requirement need help in achieving this.
Employers must grant 10 days paid leave to employees that worked for six consecutive months from the time of hiring and who worked on not less than 80 per cent of all schedule work days. This paid leave may be taken consecutively or separately. Where an employee's application to take paid leave will hinder the normal business operations, the employer may require the employee to take such paid leave at a different time.
The number of days of paid leave available to employees increases in proportion to employees' length of service as set forth in the below table.
Years of Service 0.5 1.5 2.5 3.5 4.5 5.5 6.5+
Paid Holidays 10 11 12 14 16 18 20
The right to annual paid leave expires after two years. In other words, annual paid leave left over from one year may be carried over and taken the next year only. For example, if an employee is awarded 10 days paid leave after their first 6 months of employment; those paid holidays will become invalid after 2.5 years of employment. Use them or lose them.
Simply put, holidays from one year can be carried over to the next year, but not to the third year. So, if you don't take your leave from one particular year within 12 months of that year ending, you will lose that first year's allowance.
Employee can take leave encashment of holiday leave only when leaving their employer. It is not legal for companies to buy up the holiday leave of those still working for the firm.
In my organization one PSG grouping has been used for all countries, it wont be possible to change the grouping now. In such a case how can we provide different rule for different country without customizing the Leave module.
Do we have to use any PCR for this, if yes which??
Regards,
Jailakshmi
Edited by: Jailakshmi on Aug 3, 2011 7:16 AM

Hi,
Use QUOMO Feature to give different entitilement to employees.
Leave entitlement as per seniority can be configured in base entitlement.
Keep validity and deduction period for 2 years by using :Relative postion" option in validity and deduction period table.
Rgds,
Lata
Rgds,

Quota Generation with different base entitlements

Hi,
I have a quota type PTO of 80 hrs which is applicable for all the associates who completed 90 days service.
So, I configured the base entilements seniority as 004-999 months and given 80 hrs. While generating the quota for an associate who joined on Apr 1st, he is getting 60.5 hrs which is correct, but this quota is valid from July 1st ONLY.
PTO (Paid Time Off) 60.50000 Hours 01.04.2009 31.03.2010 01.04.2009 31.03.2010
Maternity Leave 336.00000 Hours 01.04.2009 31.03.2010 01.07.2009 31.03.2010
How I can change that date to 01.07.2009? It should not be distrubed for other associates which are valid from 01.04.2009.
Please help.
Thanks & regards,
Venkat

Hi,
Some issue here - I did the changes like that, but when I ran the report for an assocaite who joined on 5/5/2001 also getting the quota from 01.07.2009. This is incorrect. This 3 months condition is applicable only for the new joinees. The condition is the associate should be having 90 days of service in the company to get this quota.
Please suggest.
Regards,
Venkat

Use of Time Evaluation to generate Absence Quota

Hi,
We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
Any comments/suggestion/advise will be very helpful to us.
Thanks.
Sujit

We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
Thank you so much for the response.

Absence Quota In Time Evaluation

Hi,
I am working on Absences,i done the configaration part for abxebnce quota and i excute the report RPTQTA00.Its working fine for all Absence QTs.
But while i am running the PT60 its displaying only one Absence QT. I need to see the all the Absences QTs for that Ee.
Can U any body help me Hw to See the all Abs. QTs of that Ee.
Thanks In Advance
Swarupa

Hi
Executing RPTQTA00 and Time Evaluation are two different concept of Quota Generation. You have to executed RPTQTA00 before than Time Evaluation for Ee then you can see all the Absence quotas via time evaluation.
Once you execute time evaluation you can do the following :
click any of the date then click Manage Time Account > Quota > ABWKONTI.
In ABWKONTI you will see those quotas, which you generated via RPTQTA00 (but depends upon the Selection rule you've customized in V_T559L) and the till date Quota Generation for those Absences for which you put the button on Increase.
e.g., Ee DOJ 01.01.2008, you run RPTQTA00 on 01.01.2008 and CL and SL gets generated as follows :
CL Quota - 01.01.2008 to 31.12.2008
SL Quota - 01.01.2008 to 31.12.2008
After this you are executing Time Evaluation and you client execute time evaluation on daily basis. so when you run time evaluation on 01.01.2008 system will check the increase button in customization of Time Evaluation and credited the Quota depending upon the customization u've did in V_T559L (like you want to accrue Ee quota on a daily basis or calendar year.) so system reflects everyday quota for such absences in the log you can view these daily generated quotas in various sections of Time Evaluation.
hope it suffice
Regards
Pradeep

Time Management Operation to Update Absence Quota Used

Hi Gurus,
Is there any standard operation available to update absence quota used. I'm already using UPDTQA to update Absence Quota Entitlement, but is there any standard operation tha i can use to Update Absence Quota used.
Thanks!!
Rajiv
Edited by: rajiv patel on Mar 27, 2008 6:38 PM

Hi,
I have many doubts about Quota generation with time evaluation. I need to discount two hours,for example,to a certain quota type at one particular situations and employees.
I think I can do it using function QUOTA and operation UPDTQ. To do it I have to select the option "Increase" or "Replace" in table V_556A_B,isn´t it? .But my problem is that I need firstly a quota entitlement generated with RPTQTA00,for example:
I have to generate a entitlement of 30 hours for all employees of a certain personal division ("No generate" selected in V_556A_B and RPTQTA00 ).
After that,when I run time evaluation on fridays for example,I have to discount 2 hours of this entitlement of 30 (Increase or replace in V_556A_B,and use then Quota and UPDTQ).
My real problem is to generate the quota by RPTQTA00 because I´ve checked "Increase"or "Replace" (V_556A_B) to permit quota generation (modification) with Time Evaluation.
I hope my explanation was ok and somebody can help me please.
Thanks a lot

Time management: Can we default absence quotas types in IT2006

Hi Team,
Kindly can you let me know if we can default Absence quota types with Entitlements in IT2006 without using RPTQTA00 and schema.
Regards,
Vimal

Hi Team,
It's working fine now.
In the SPRO node
Automatic accural of absence quotas i changed the radio button from "Increase " to "No Generation".
Thanks veyr much for your responses.
Regards,
Vimal

Absences not deducted from Absence Quota for One Employee

Dear Friends,
I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
But for Sick Leave absence type, it is updating in his absence quota records...
I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
I couldn't understand what will be the reason? Can anyone shed light on this issue?
Thanks in advance,
Sai Narayana,
SAP Functional Consultant.

Hi JS,
I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
I found -
1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
Thanks,
Sai

Absence quota generation with PCR in Time Evaluation

Similar Messages

Maybe you are looking for