Absence Quota

HI All,
I hav a query kindly reply it.....
If i have put wrong dates for absence in infotype 2001 and in future if i have 2 either change the dates or convert it into present instead of absence. how'll i do tht?
Thks
Edited by: DeeptiGupta on Mar 13, 2009 6:02 AM

Hi,
The old entry to be deleted and enter the New Absence of Correct Dates.
This will not restrict you. As Many employees through ESS apply for the leave and once they return early from the vacation, they will cancel the leave and reapply for a fresh leave with the actual dates. In SAP, the record which created gets deleted and a new entry of leave is created. Hope this helps.
Regards
Team Member.

Similar Messages

Use of Time Evaluation to generate Absence Quota

Hi,
We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
Any comments/suggestion/advise will be very helpful to us.
Thanks.
Sujit

We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
Thank you so much for the response.

Absence quota prorate by monthly basis

Hi Experts,
I have an issue regarding the absence quota for the new joiner or leaver. My client wants the leave earned to be given upon completion of the month. My current configuration is base on calendar days.
For example, when a new joiner join the company at 2nd or mid of the month then the leave entitlement will be given for the following month. That mean when an employee join at 3rd or any other days in January 2010, the leave will be prorated starting from February. This same to the leaver, if the employee is leaving the company at 3rd or any other days in April, then the leave will be prorate till March. The entire April will not be take into account.
My question is how can I configure this scenario?
Appreciate the input.
Thanks

Hi,
If you are not using TE then you will can always write an ABAP program which will run and load data on the first of every month.
For Hire:
The program can check the hire date from IT 0041. If the hire date is less than the first of previous month then you can add the monthly entitlement to the absense quote in IT 2006. If it is in the middle of the previous month then you can prorate according to the formula and then add to the monthly entitlement to the absense quota in IT 2006.
For Termination:
You can base the above logic with the termination date in the IT 0041
If you maintain IT 0041 well and good or else you will have to base it on IT 0000 Actions infotype.
Hope this helps.
Ajay

Prorate absence Quota monthly based on number of days worked.

Hi All,
I need to Generate Absence Quota Prorated Monthly on the following criteria.
4.5 days Per month.
0 - 5 day = 0.5
6-10 days = 1.5days
11- 15 days = 2.5 days
16-20days = 3 days
21 - 25 = 3.5 days
26 and above = 4.5 days
54 Quota Yearly entitlement
Negative Time evaluation -
Time evaluation run at end of the month.
If use Base Entilement as .15 / days and daily accural in Table T559L ,
then without any PCR quota is generated but for 31 days it generates 4.65 days and people joining middle of the month is not as per the criteria mentioned above ie as per number of day worked.
Can any one guide me with the steps and PCR's required if any.
Thanks
Sethu

Hi Dinesh,
Thanks for your response. I have already created and assigned it in T559L. The below is the Rounding rule.
Lower inc     Upper     Target     Rollout
0.00000 X     0.75000      0.15000 X
0.90000 X     1.50000      1.50000 X
1.65000 X     2.25000      2.50000 X
2.40000 X     3.00000      3.00000 X
3.90000 X     4.65000      4.50000 X
As per my earlier thread description when i make it daily accural and assign this rounding rule then for 31 days it calculates 4.65 days and for people joining middle or last week of the month it is not prorating as per the requirement,
Thanks
Sethu

Employee Joined in Mid of Year : Absence Quota Generating wrongly

Hi Experts,
Below is my query ...
Employee joined in the month of April... Absence Quotas should calculate on prorate basis...
In a year there are 20 Casual Leaves for an employee...
So employee joined in the month of 1st april or 4th of april 6 Leaves should deduct from 20 that is on prorate basis
what I did was I have selected Prorate basis in accrual entitlements and selected month in Accrual period When I generate RPTQTA00 it is showing 13.2456 something instead of 14 leaves Do I need to do rounding rules or should I have to configure something else? How can I do that If it is rounding or if it is something else how Please let me know

Hi,
When you generate RPTQTA00 it is showing 13.2456 something instead of 14 leaves is correct, because you have selected month in ACCRUAL PERIOD tab.
please select the month in accrual period tab. and try..
might be when you have saved it, it might not got saved in to that table.
so please save the table again by selecting month and see it has to get stored in the table by asking you request no.
regards,
mohammed

Absence Quota generation / Accruals

Hi Gurus,
I am trying to configure Absence Quotas with the below mentioned rules.
1. To be eligible for PTO you must be on the payroll at least 6 months at which time 20 hours of Paid Time Off is granted.
2. In the second year of employment an employee will receive 5.58 hours of PTO per pay period.
3. The accrual rate increases with continued years of service. After 5 years of employment the accrual rate is 7.11 hours per pay period. See the chart below:
Years     PTO Hours
1                  20 Hours
2 - 4            145 Hours       (5.58 hours per pay period)
5+               185 Hours       (7.11 hours per pay period)
A maximum of 240 PTO hours (6 weeks) may be accumulated.
Can you please advise if it's possible to automatically (using Time Evaluation) generate 20 hours of quota in one go after 6 months, and then after 1 year is completed, the quota accrual starts happening every pay period. If it's possible, then please advise me how can this be achieved.
Any kind of help is really appreciated.
Thanks in Advance,
Ashish Maini

Hi,
In table V_T559L you can set up to do the accrual based on a time type and using a rule, you can check based on infotype 41 when to generated it.
Regards
Frederick

Issue in Absence Quota generation wrt to actions (IT0000);using schema TQTA

Hi
I wanted some clarification on Absence Quota generation through schema-u201CTQTAu201D
The client Scenario is that they want Earned leaves (absence Quota type 0002 and 0003) and Half-Pay leave (Absence Quota 0004) semi-annually.
Whenever an action is run (whether with employee status active or inactive) the absence quota is generated twice:
1.     Last day of previous action
2.     Last day of evaluation period.
Main issue is that when it is reflected in IT-2006 it is summing up the quota generated on both the above said dates.
Also the quota that is generated on the last day of the evaluation period is not prorated but for the entire accrual period.
When the employment status of an action is inactive; the quota is generated upto the last date of previous active action, but if any other action is executed with employee status as u201Cactiveu201D in the same accrual period and time evaluation is run; the quota gets generated again on the last date of accrual period for the entire accrual period i.e. the inactive period is also taken into consideration. Moreover, both the quota generated are added up and displayed in IT-2006.
Kindly advice me the solution for the same.
Thanks and Regards
Parul Jain

Hi
I wanted some clarification on Absence Quota generation through schema-u201CTQTAu201D
The client Scenario is that they want Earned leaves (absence Quota type 0002 and 0003) and Half-Pay leave (Absence Quota 0004) semi-annually.
Whenever an action is run (whether with employee status active or inactive) the absence quota is generated twice:
1.     Last day of previous action
2.     Last day of evaluation period.
Main issue is that when it is reflected in IT-2006 it is summing up the quota generated on both the above said dates.
Also the quota that is generated on the last day of the evaluation period is not prorated but for the entire accrual period.
When the employment status of an action is inactive; the quota is generated upto the last date of previous active action, but if any other action is executed with employee status as u201Cactiveu201D in the same accrual period and time evaluation is run; the quota gets generated again on the last date of accrual period for the entire accrual period i.e. the inactive period is also taken into consideration. Moreover, both the quota generated are added up and displayed in IT-2006.
Kindly advice me the solution for the same.
Thanks and Regards
Parul Jain

Time Management - Work Schedule /Absence Quota / Part-time quota generation

Hi Experts,
Need your help!
We have a requirement where we need to create distinct work schedules for each irregular / part-time work pattern and the number of work patterns we have identified is more than 1000. We are using report RPTQTA00 to generate quota. We have used work contract, employee sub-group & employee payscale group in the QUOMO feature to get the base entitlement picked up. We have defined base entitlement for the full time workschedules with 37.0 / 38.5 hours and there is a reduction rule which reduce the absence entitlement for part time employees as per the employement percentage in IT0007. Now we have a scenario where we have created a work schedule with different no of hours for each day of week (M-4, T-6, W-4, TH-6, F-4, S-OFF, SU - OFF); this work schedule is treated as full time work pattern by the system and quota is generated as full time work schedule refering to the QUOMO settings, but as per my client employees with this work schedule have reduced hours of working hours (24 hours, not 37.0 or 38.5 hours)and hence it should be treated as part-time employees, and the quota generated should be proportionately reduced. I have very limited scope to create any ESG or PSG as we do not have any distinct emplyee sub-groups maintained for full-time and part-time employees and the project has already gone-live with payroll/time. It is worth mentioning over here that we are recording absence through ESS and it takes into account the daily planned working time maintained in IT0007, so we are very particular to keep it as accurate as possible.
I would really appreciate if somebody can please suggest any possible solution for the above issue, or guide me on what would be the best way to tackle it. I can give more details in case anybody need to have a better understanding of the issue to suggest a solution.
Thanks in advance
Sujit

Hi Kathy,
Yes, i have found the solution to it. I do not know whether it will fit into your situation or not, but i got two solutions for my issue mentioned above, please check it may help:
1) To use capacity utilization field in IT0008 to get the FTE hours and defining the reduction rule of absence quota based on the capacity utilazation percentage.
2) There are three user exits available in the standard report RPTQTA00, i have used one of them to write my own rules for the calculations (deduction rule)
Do let me know if i can help you in any respect. Thanks.
Regards,
Sujit

Issue while creating Absence Quota for one employee

Hi Friends,
Our customer has a weird issue. When time evaluation is run, One Absence Quota type (Leave in Bank) is not getting generated for Only One Employee.
This leave type has been updated with quota in IT 2006 after running PT60 for all other employees in the PA. The issue is only with one employee.
This absence quota is assigned "Increase" in table V_556A_B (Permit Generation of Quotas in Time Evaluation)
Can any one please suggest how to generate the missing quota for this employee. Thank you !!

Hi
Thanks for your replies !!
Please find the screenshots attached.
Leave in Bank Absence type which is valid for 2014 is missing in IT 2006 instead This absence quota valid upto 31.12.9999 is present.
Current requirement is to remove the quota which is valid upto 31.12.9999 and replace the quota which is valid upto 31.12.2014.
I have checked for some PERNRs with same EG/ESG/PA/PSA combination. They have the absence quota valid upto 31.12.2014 Only.

Time Management / Absence Quota

Hi Experts,
Need help to have clarity as to how to generate paid leave :
Quota Generation: per month (3 day for every completed month of service) accrual during the probation period (first 6 months after joining)
Deduction Rule: Deduction from the accumulated leave balance
Availing Rule: Need to restrict for availing during probation period.
Rounding off: Rounding off fraction to full day during every quarter.
Accumulation Rule: Till 300.
Encashment: Encashment over and above 60 days of quota; only once in a year /or during separation / superannuation.
Pl treat it as urgent as I have no clarity how to fix it
Regards,
Dev

Hari Prasath
Would you mind send me these docs, too? I really appreciate it... I've to customize some absence quotas and I've some problems... I think that I'm missing steps...
Thank you and regards.

Absences not deducted from Absence Quota for One Employee

Dear Friends,
I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
But for Sick Leave absence type, it is updating in his absence quota records...
I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
I couldn't understand what will be the reason? Can anyone shed light on this issue?
Thanks in advance,
Sai Narayana,
SAP Functional Consultant.

Hi JS,
I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
I found -
1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
Thanks,
Sai

Absence Quota Accruals from days to hrs

Hi Guys,
I need to change the Absence Quota Accruals process in SAP ERP ECC 6.0 system from Accruing time in days to hours. All necessary configuration changes are to be made in the development system (including Time and Payroll Schema changes for absence quota accrual, year-end transfer of unused balance and payout) and upon approval be transported and tested to the Quality Assurance system and Production. All past historic/archive transactions and records must be changed and reflect the absence quotas in hours.
Pls. let me know the steps for doing the same.
Tnx
SKR

Go to the table V_T556A and change days to hours for your quota.
Ccheck the deduction rule attached to the absence(which is related to quota) and change the units to hours.
You may have to run the time evaluation in the update mode from the retro date (past date).But I wouldn't suggest you to run the time eval from the past date untill it is tested regurously in the QA system,because retroing may cause some issues.

Absence Quota Carried Forward to Next Year

Hi All
hope you are doing well. I was looping around for carry forward remaining absence quota from one year to next year
Requirement:
Absence Quota for 20 days generated from 01.01.2012 to 31,12.2012, deducted 4 days on december 2012
but absence quota to next year i.e from 01.01.2013 to 31.12.2013 is showing as 20 wherein actual should be 16
Followed Woods documents at Carry Forward Absence Quota but failed
Configuration of Time Types, PCR and Schemas as folows, request your kind attention at earliest as its business critical
Configured a constant at T511k
Created two time types
For Quota
For carry forward
PCR as follows
Schema
Request your kind attention on the same, helpful/ right answers will be rewarded with points
BR
Anil
Message was edited by: Sikindar A

Hi Anil,
I just had a quick look at the PCRs and I think some things are wrong.
First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
Until here you will have remain part of quota at last day of last month in time type 0904.
Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
I don't understand what ZCFT is for!
Regards,
Omid

Absence Quota - Negative Deduction to

We are currently configuring Absence Quotas in SAP 4.6C but are also in the process of upgrading to ECC 6.0 Enhancement Package 1.
For annual vacation, we are accruing on a daily basis so that only the balance accumulated to date is displayed as the Quota number. However, employees are allowed to record their absences for the entire year in advance.
We are trying to use the "Negative Deduction to" field but have encountered two situations that are not working in alignment with the business requirements.
1. Since there are differing levels of entitlement based on years of seniority, the number of hours each employee can go "negative to" is based not just on Quota type but also on the employees grouping & seniority. The Negative Deduction to field in T556A is only at the level of the Absence Quota.
- Is there a mechanism for applying additional logic to the decision on what the Negative Deduction to value should be?
2. When the entitlement does start to accrue to the Quota Number field, this is added to the "Negative Deduction to" value. In our business requirements, the Negative Deduction to value would represent the fixed cap for the employee not one that is over and above the guaranteed number of the entitlement.
- Is there a way to cap the hours taken at a maximum, not add to the entitlement?
We have reviewed the user exits in HRPTIM03 but none of these appears to be functioning on the deduction side of the evaluation.
The function module that is performing the edit checks where the Negative Deduction to is evaluated is HR_DEDUCE_QUOTA but we have not located any user / customer exits in this code.
Any suggestions would be appreciated.

Point 1: one quick solution I think about is you could use MODIF Q in the schema to set the Quota selection grouping based on what you want (in your case seniority) but it means you need to generate the quota from time eval, and you may still have the problem when employee "upgrade" in the middle of the quota period.
Point 2: I must admit I don't have much good ideas right now, the easiest would be to check in a schema rule and generate an error message, but the inconvenient is you know it too late, when the absence has already been saved. I'll keep thinking about it..
For your info I've been in 2 projects with 2 diffrerent ways to handle the problem (none is a perfect solutions):
A) Give in advanced the full entitlement, and re-calculate in Time eval every month (so the real part increase and the "estimated" part decrease)
B) Have 2 quotas: one with full entitlement with the absence deductions and another one with the real "cumulated" amount. The link bewteen the 2 of them is also driven by time eval and error/info messages...
If any one has the perfect solution (well, without 6 months of Abap development), I am also interest in knowing it.
Regards,

Absence Quota Generation begining of Calendar Year

Hello Experts,
Although the said requirment has been already posted in SDN, could not see any solution for this from the threads.
I have a requirment to Generate Absence Quota i.e Annual Leave at the begining of the year, precisely when i run Time Evaluation on 01.01.2011 system should generate the Quota in advance for the Calenday year.
I could generate via Report RPTQTA00 but the same is not happening in TE, even i tried with all Accrual options like Calendar Year, Monthly, Payroll Period, Base Period etc but system picking only the last day of the month or year.
I am wondering if some potential solution would have released from SAP during EHP 4 and 5
Kindly help me with your expertise
thanks
Gita

Hi Vivek,
i am facing the following senio can you please provide and document with pcr. I dint find the solution in SCN so please provide solution ASAP...
I have one senario in TIme management ....
Employee have 1year probation period ,but he is entiteled for taking leave after 1 year . that to leave should be accured for calender years after probation period. & henceforth it should accur per calender year.
For Example: Employee have joined on April 2011 ,Then his leave should be accured after April2012 upto Dec 2012 & then for next year 2013 leave should accure from Jan 2013 to Dec 2013.
Please help me to map the senario with detailed configuration steps
Pls help me out here the requirement is immediate.

Absence quota changed to 0

Hi,
we generate the absence quota through time evaluation. but after executing the time evaluation absence quota of EL lchanged to ZERO. How ever it has been corrected after executing the time evaluation once again.
I just wanted to know, how it has changed to zero? is there any bug in the application or there some other reasons.
Please let me know what could be reasons.
Regards
Sandeep

Hi Dracula,
Thanks for your response. No am not able to simulate the situation, it happen just once in PRD server.
I do agree that some one might have chaned the value. But if the quota is generated by time evaluation then you cannot changed the record directly in infotype (2006). Time evaluation generated quota can be changed on through infotype 2013.
I do request all the expert please share your thoughts. Please do let me know what could be the problem here.
Regards
Sandeep

Absence Quota

Similar Messages

Maybe you are looking for