Absence type not visible in ESS

Hello SAP Consultants
Employee when trying to apply leave thru ESS, the employee is not able to view absence types in the drop down selection. Backend version is 4.7 and portal is 6.0 version
We have checked with the portal team on the same issue.The portal team has conveyed that it is not a portal issue.
Please suggest the appropriate solution to the above mentioned problem.
Regards
Jyothsna

Hello,
As you are using ECC 4.7 , u ll not able to view mentioned table V_T554S_WEB.
You can check through SPRO settings PM-ESS-Service specific settings-Record working time-Select allowed Absence Types.
From this node , u will able to check allwed absences on ESS.
Hope this will help you.

Similar Messages

Currency Conversion type not visible in the query

Hi ,
I created one currency type conversion   Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visible

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

Button not visible in ess or mss appraisal portal.

i have implimented custome BADI implimentation for standard BADI " HRHAP00_ADD_HEADER " for my appraisal template for ess and mss. it is showing one additional data button in header section of the template. when i see this template in R/3 system in dev cleint or any cleint in server it is showing the additional data button. but when i go to web browser to open appraisal portal for ess or mss adn check the button is not visible there. please help. if it showing the additional buton in R/3 system adn standard BADI is implimented then it must show it in portal in web browser also. portal is built in web dynpro abap standard only.

I guess HRHAP00_ADD_HEADER badi is for only backend changes
Thanks
Bala Duvvuri

Custom subtype not visible in ESS benefits

Hi Experts,
in erp2005, i created a custom subtype 9B for IT0021 (family members). defined a use case to maintain records through ESS personal information workset. so, a new button with name beneficiaries is seen on portal. however, these beneficiaries are not visible when employee wants to add them in the benefits plans as a beneficiary in certain plans. in the backend system, they are visible however. they can be added to a plan.
thanks for reading, i appreciate your help.

Kumarpal,
did you check this thread
https://forums.sdn.sap.com/click.jspa?searchID=17218337&messageID=6299502
Thanks
Bala Duvvuri

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

Request Type not Visible in CUP

Hi,
We are in the process of configuring CUP.
We have uploaded file AE_init_append_data _CC.xml into the initial system data of CUP. But Request types MITICRLC etc are not visible in CUP.
Workflows for RAR are visible in CUP-> CONFIGURATION->MISCELLANEOUS
Any clues.
Regards,

Please check if you have activated the RAR workflows in CUP-> CONFIGURATION->MISCELLANEOUS along with proper exit URIs and User ID password details.
Once these workflows are activated only then you will be able to see the corresponding details under request type, priorities etc for RAR workflows.

Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

Eclipse - imported type not visible !?

I have an import at the beginning of my code but it is underlined and when you hover over it it says imported type ... is not visible. Why? I have added the jar and all other imports work fine. What could be wrong?

Another thing to look for is to make sure that the class you are looking for is in the Jar file, and not a different one. Like how the JavaMail api has multiple jar files.
Something you could try is to remove the import, but keep the part of the code where you use the classes from that import, and save the file. When you get an error, right click on the error and select "Quick Fix", and see if it offers the class as an option to add.

Transaction types(PO types) not visible on SRM 7.0 portal

Hi all,
We added transaction types in the SRM 7.0system.But these are not reflecting in the SRM 7.0 portal.
Under Purchasing role ->create Documents -> Purchase order .
Once I click on the purchase order it is giving a table with columns PO type and PO desc.
and showing a message the table does not contain any data.
But SRM consultant added the transaction types(PO types) in the backe nd.
Is there missing configuration steps?
Thanks and regards,
Rajesh

Hello Rajesh,
Few more pointers, if works:
1. Check the roles, sometimes security restricts role by document types.
2. Extended classic scenario is activated.
3. As a standard, there are 3 purchasing tabs in SRM 7.0 for buyer depending on portal roles, ECC, SRM & harmonized role (ECC & SRM), Check if you are trying to create PO in SRM/Harmonized role purchasing tab & not in ECC. Easiest way to check is you will have shopping cart POWL visible in SRM purchasing tab.
Hope this helps.
Thanks
Ashutosh

Ztransaction type not visible in webui as follow up under Zopportunity type

Hi Gurus,
I have made an exact copy(z005) of 0005 (outgoing email), have enabled the transaction for the Web Channel, have all the authorizations and still cannot see the Z copy on the webUI ib CRM test server,
and also assigned Categories (email) to Transaction Types(z005) in
spro>crm>transactions>settings for activities>maintain categories, goals & priorities>Assign Categories to Transaction Types
same way i have created an exact copy(zopt) of "oppt" have enabled web channel, and now when i open it and try to create follow-up transaction, here it is not showing (z005) i.e "z" outgoing email transaction as an option but showing other z activity transactions which i created automatically in CRM test system but it is working fine in CRM development system.
i am not able to figure out what is going wrong in CRM test system.
Please help it is critical.
thanks,
G.One
Edited by: wwgauravshah on Jan 28, 2012 8:14 AM

Hi,
in standard SAP offering , Business activity and task transaction type are given as follow up for opportunity transaction type , it becomes more evident in my case bcoz even in my CRM development server no copy control are maintained still it is visible in GUI and webui interface,
moreover i also checked authorisation( and profile sap all) for business transaction object "crm_order_op" it is " * " in my login role "sales representative".
even OP generic settings are same( total 572 ) in all CRM systems(i.e dev,test and prod),
and also as i said earlier that these transaction types (bus2000126-outgoing & incoming email activity) are visible in GUI (test & prod)but not in WebUI interface.
is there any note or something...or does it has to do anything to user assigned to a position in organisation model or any SICF object or any email setup (basis).
please help it is critical...
Thanks,
G.One

Note type not visible in Creation of Service Request

Hi there!
I am experiencing this OAF issue:
When creating a new Service Request there is a section "Problem Description" where we can see DFF, Summary and Notes.
The Notes region I can see is extended from another Region where there is the Notes Type and the actual Note to be entered (TextInput). But when creating a new Service Request I cannot see the Note Type messageChoice and don't know why. If I open the personalization page by clicking on "Personalise Page" link Ican see the Note Type item and it's visible according to the information but I still cannot see it. Is there any setup here that is used in the controller to hide the item? Is there something else happenning? Please, help.
//Patricia

Hi!
I discover that both Note Type and status are set to rendered=false in the controller. That's the answer. I have to check I customer needs to see those or if they can live with it as is. Question is why arethey invisible in Service Request entry?
//Patricia

All document types not visible in SAP EasyDMS

Hi,
We have configured a no. of document types in DMS ( in SAP R/3). But only a few of those are visible in the SAP EasyDMS ( Web GUI). We are not able to figure out how to make those visible. I am completely new to EasyDMS. Can anybody help?

hİ,
that is very general problem, you should be more specific.
i send you , link for easy dms configuration,
i hope this helps
[http://help.sap.com/bp_bl603/BBLibrary/Documentation/223_BB_ConfigGuide_EN_TR.doc]
best regards,

Pricing condition type not visible

All,
I have a condition type which is visible in SPRO> Sales and Dist> Basic Functions> Pricing Control> Maintain Condition types.
But when i go to VK11 to create record for this condition type, it doesn't exist there. Seems like its hidden or something.
What would make it not show up in VK11 ?
thanks

Hi,
Make sure it is not a header condition.
Also check if you have assigned an access sequence to it.
If you have created it from scratch, generate your condition table again.
Regards,
Amit

Date Types not visible in CRM Service Request

Dear Friends,
I am implementing Service Requests in CRM 7.0 in our project
I have configured the Date Types and assigned them to the Date profile
The Date profile i have assigned it to the Transaction Type
But when creating the new Service Request Transaction Type the dates are not appearing
Can you help me by directing me to any missing config
Regards,
Raj

Hi,
check if you have set the screen assignments in the date profile. When you assign the date type, in the left navigation area, one level below, you have to set the visibility of the date type.
Regards, Toine

Condition type not visible in billing document

Hi
We are currently in the process of making some changes to the pricing procedures.
While processing an IC order, we find the following discrepancies,
In VA03, when we enter the order details, the price shows the expected value and so do the condition details.
However, in the billing document for the same, in VF03, we find that one of the condition types are missing, hence the value in the sales document and the billing document are different.
I have checked the details in the condition types, pricing procedures and the access sequences, everything appears to be configured correctly.
Please advice as to how this can be corrected.
Thanks
sap10

Hi
Check in pricing procedure (tcode V/08) if you have any Reqt.
Other possibility, but I think that it doesn't matter in your case. See SAP Note 105621 - Authorization check for the condition screen, that it is used to hide conditions, but not for delete them.
I hope this helps you
Regards
Eduardo

Absence type not visible in ESS

Similar Messages

Maybe you are looking for