Absent AIF audio in CS6 after converting from earlier version

The timelines I'm working on were originally created in Premiere 5 and 5.5. The issue I'm having is when I openthem in CS6 some AIF files stop showing any wave form and playing (the Mp3's are fine).
This doesn't happen on all timelines or all the time - but one timeline in particular. The audio is gone both when playing a single clip in the source monitor - and when playing a sequence in the program monitor. But when I go back to the original file - it plays fine (these files are stored in an external hard-drive enclosure attached to the computer). But even when I re-import the audio file - it doesn't play in the timline.
I'm on a new Imac with 3.4GHz Quad-core Intel Core i7, 16GB 1600MHz DDR3 SDRAM, 1TB hard drive1, NVIDIA GeForce GTX 675MX with 1GB
(Not to muddy the water - but just to provide all potentially related info...each time I open the file, random video files go wacky - turning into a red and green screen. By contrast, when I re-import these files - they work in the timline fine).
Any help would be hugely appreciated...I'm at a loss!
Jacob

Hi jzhess,
Please check the below forum link. The issue might be with the audii channels
http://forums.adobe.com/message/5602187#5602187
Regards,
Vinay

Similar Messages

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

What happens when you click the Save/Download button after the file conversion is complete?

I installed the InDesign CC Testversion and now i try to open INDD-Files from earlier Version. Always i get the error "This file is made by an earlier Version...." but it´s CC that is the latest Version. What is the problem ? Should i have to convert the

I installed the InDesign CC Testversion and now i try to open INDD-Files from earlier Version. Always i get the error "This file is made by an earlier Version...." but it´s CC that is the latest Version. What is the problem ? Should i have to convert the files ?

Adobe has been using confusing version names for at least five years.
There are now two versions labeled CC, version 9 and version 10 (also known as CC 2014). Version 10 is the latest, and if you attempt to open a version 10 file in Version 9 that is not fully patched you will get an error message telling you that the file cannot be opened. The latest patch for version 9 should use a cloud-based service at Adobe to convert version 10 files to IDML and allow you to open that.
I suspect you may be using an older operating system. Version 10 requires that your system runs at least OS X 10.7 or Windows 7 SP1 and if you are not it will not even be offered to you.

Opening projects in CS4 from earlier versions of Premiere

I have various projects in Premiere 2.0. They work fine.
I tried opening one in Premiere CS4. It mostly works, but I found a small hickup where a transition (cross disolve) is quite messed up. Otherwise, it seems the project is playing the same in CS4.
My question is: how accurate is it to open projects in CS4 from an earlier version? I don't really want to have to go through every second of every project to make sure it works properly, yet I would like to upgrade to CS4.
What's the normal protocol for this? I'm sure people deal with having to open projects from earlier version of Premiere all the time.

Harm,
Thanks for your answer -- it's helpful. I will follow your advice.
What blows my mind is what the legions of editors out there do when they have to old up an old project? This must happen all the time!
Do editors have to maintain two machines -- one with the old version of Premiere to open up their old project, and another machine to work on new projects? Oh, I guess they need one machine for each version they've ever created a Premiere project in. That's like 5 machines.
Seriously, what to people do when they have to open up an old project for whatever reason? It's seems like if you open it up in the latest version of Premiere, you would have to go through every second of the project very carefully to make sure there are errors introduced -- way time consuming.

Updating projects from earlier versions of FCPX to FCPX 10.01.3. FCP does'nt see the project i want to update.

I've successfully updated projects that were already in previous version libraries, but have some archived ones from earlier versions of FCPX which the program does not see to update. Any ideas on how to do this!

I am assuming you mean projects from 10.0.x
You need to place them in the traditional location "Final Cut Projects" (at the root of an external drive or inside your Movies folder), and likewise your events inside a folder "Final Cut Events".
Then use File->Update Projects and Events...

Mini Bridge Missing from InDesign CS6 after Upgrade to InDesign Version 8.1

I discussed this same problem https://forums.adobe.com/message/5833991 after upgrading to the prior version 8.0.2 of InDesign.
After upgrading to InDesign Version 8.1, Mini Bridge no longer works. Mini Bridge does not show under the Window menu and shift-clicking the Bridge icon opens the full Bridge, not Mini Bridge.
With the prior version 8.0.2 problem, I was able to recover Mini Bridge by doing a re-install of InDesign under Window's Safe Mode. Microsoft has somehow changed Safe Mode and I can no longer do the reinstall using Safe Mode. I have tried several different ways of reinstalling version 8.1, but none of them correct this problem. Still no Mini Bridge.
Mini Bridge does work in Photoshop CS6 with no problem.
I have read through all of the messages that seem to relate to this problem in this forum, but none of the suggested solutions work for me.
Can anyone provide me with an answer? If not, how do I get help from Adobe? I am willing to pay for support, if necessary.

RESOLVED - I can't believe it, but I have actually figured this out.
Getting frustrated with going in circles, I decided to dig into security options. First off, I opened Windows' Properties for the start-up icon for InDesign. Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3). This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign. Low and behold, the option Window | Mini Bridge was now displayed! And it worked!
Sorry to have bothered you gentlemen with this problem. I really appreciate your assistance!
Mark.

Receiving a message in my word document after converting from a PDF to word. Please advise

After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.

Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David

Unnecessary text behind listbox after converting from a web-page

When I make convertation from htm-page containing listbox to pdf, there also appear text on the back of Listbox object. The strings are equal to Listbox values. If I create listbox manually, these strings not appear. How to fix this bug?

OK, I see now what you mean. It's been a while since I've web-captured an HTML form and I've never noticed that before. I don't think there's anything you can do to prevent it from happening though. You can change the color of the text so it's not visible, or remove it through redaction or other editing tools.

Template From Earlier Version

My website was created using Dreamweaver MX in 2004 by someone who is no longer with our company. I am attempting to revise the site. I have loaded DW CS4 and am operating on Windows XP. I have created new pages using a template from MX version. The pages show up in my design view and in the local file list. They appear on the remote file list but the size says 0 KB (they say 10 KB on the local list). When I sync them, it says it works. When I "put" them for the upload, they will not. Is there a problem with using the template from the older version? Note: changes I made to existing pages (also created by this same template) upload fine and appear on the website.

When it asked if you want to put dependent files, it is asking if you want to upload any linked/imported css files,
any graphic files that might be used on the page, etc.
I you insert an image into a page, you will have to upload that to the webserver (ftp). If you select yes to put dependent files, then that is done for you by DW, otherwise, you will have to do it manually (select the file in the "files" menu and "put".
If your pages are on the web server, then it sounds like DW is doing what it is supposed to.
Jim

Missing title from earlier version

Hello Apple, iMovie community,
I am strageling to find a very useful 'title' animation that was once used in iMovie software.In the new one and in Final Cut I could not find it anymore.
If I import an old iMovie project which has this 'title' and would like to edit it, iMovie crashes.
Here is a link to a clip containing the above 'title':
https://www.dropbox.com/s/0vjmvik4yju4xr7/title_example.mov
Could you help finding a way to use this 'title' animation again?
Any help appreciated.
Regards,
Kris

Michael,
The one problem with sending files from my, or anyone's, copy of PrE is that all of that material is © by Adobe Systems. They are not mine, per se, to send.
When I am sent such files, usually Menu Sets in PSD, from versions of PrE, or Encore that I do not own, to test for the Forum, I Delete those, as soon as my testing is complete, as I do not have the rights to use those files - only if I had the version of the Adobe program, from which they came.
I do not recall if the Additional Functional Content is available as a second install from the physical media discs in PrE 8 (never had that version), or whether it will install if another, later version of PrE is installed on a system, but if you have either the physical, or the second of the two download files, you might try to install that Additional Functional Content. One consideration is whether this Generic1 Title is in the limited Functional Content, that is installed WITH PrE, or is in the CAB (or other file type), in the Additional Functional Content.
Knowing that it IS in PrE 4.0 does not answer the above question. Heck, until ATR did his research, I never thought that it might be in my older version, but with the PNG (necessary to display the PRTL file in the Library Display) elsewhere. Thanks to ATR for that work, and info. Not sure if that points to a mistake on Adobe's part, of if it is "hidden" for some other reason? We will probably never know.
Why it was removed from later versions is just the way it happens. Adobe will add Additional Functional Content, from time to time, and will remove some, that they deem to no longer be useful. Though smallish files, they DO take up HDD space, and as most Additional Functional Content is now on Adobe hosted servers, I feel that someone decided that that particular Title was no longer popular enough to include.
Good luck,
Hunt

How do i import albums from earlier version

how do i import albums from earlier version

Import your bookmarks from IE. <br />
https://support.mozilla.com/en-US/kb/Importing+bookmarks+and+other+data+from+other+browsers
PlainOld Favorites needs to be fixed for Firefox 22 by the developer of that extension, who had sufficient notice about the changes which were originally slated to be in Firefox 21 - six weeks ago, at least.

NO AUDIO during playback after converting the VIDEO using Creative Video Conver

I have a ZEN 2GB/4GB/8GB/6GB/32GB.
I tried to convert video from a dvd using Creative Video Converter.
The video is fine but there is no audio during playback.
What am I doing wrong?

"If this is the case, the original video file may be in a format that contains muxed (multiplexed) audio and video, and cannot be exported with audio."..."If the format is "MPEG1 Muxed" or "MPEG2 Muxed," the audio portion of the file may not be retained with QuickTime Pro or iMovie."
I have read that article and I thought it ment that the sound will work after you convert to the MPEG4 format, which I did.
Are you saying that if it starts out as "Muxed audio" then there is no way to convert it?
If that is the case then in what situation would you need to use the Videora Converter?
Thanks,
Sean

After converting from fla to html 5 "413" warnings!

Hi
We have a fla file for a homepage, where we build in Flash 4 and then convert to Flash 5. After we convert with Wallaby we was a little confused about so many warnings. Here the start of the big logfile:
<?xml version="1.0" encoding="utf-8"?>
<conversion_log input_name="main_flash5.fla" output_name="main_flash5.html" date="Tue May 31 12:53:10 GMT+0200 2011" >
<status label="reading fla file..."/>
<warning label="Unsupported feature: Compiled Clip Not Supported" context="CompiledClipItem not supported: Form" code="18"/>
<warning label="substituted missing font: Swis721 BT with Arial Narrow" code="23"/>
<warning label="substituted missing font: Walkway Black with Arial Narrow" code="23"/>
<warning label="substituted missing font: Cheboygan with Arial Narrow" code="23"/>
<warning label="substituted missing font: AG ForeignerULB-Plain with Arial Narrow" code="23"/>
<warning label="substituted missing font: GeoSlab703 Lt BT with Arial Narrow" code="23"/>
<warning label="substituted missing font: DINMittelschrift with Arial Narrow" code="23"/>
<warning label="substituted missing font: standard 07_55 with Arial Narrow" code="23"/>
<warning label="Unsupported feature: Compiled Clip Not Supported" context="CompiledClipInstance not supported" code="18"/>
<warning label="substituted missing font: English111 Adagio BT with Arial Narrow" code="23"/>
<warning label="substituted missing font: standard 07_56 with Arial Narrow" code="23"/>
<warning label="substituted missing font: kroeger 0853 with Arial Narrow" code="23"/>
<warning label="substituted missing font: standard 07_58 with Arial Narrow" code="23"/>
<status label="converting fla to HTML5..."/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: bg_1_1/FrameSet[1]: frames[3,14]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: bg_1_1/FrameSet[1]: frames[3,14]/Group[0]: instance of bg_1/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: Layer 35_1/FrameSet[1]: frames[2,10]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: preloader_main/TimeLine[0]: preloader_main/Layer[0]: Layer 2/Mask contains multiple framesets: FrameSet[0]: frames[0,98]" code="31"/>
<warning label="Unsupported feature: Sound Not Supported" context="Symbol: preloader_main/TimeLine[0]: preloader_main/Layer[4]: Layer 16/FrameSet[0]: frames[0,99]/Audio not supported: Beep" code="15"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: footer_section_1/FrameSet[1]: frames[42,51]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: eq1_my_eq/TimeLine[0]: eq1_my_eq/Layer[0]: Layer 1/Mask contains multiple framesets: FrameSet[0]: frames[0,37]" code="31"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: eq1_my_eq/TimeLine[0]: eq1_my_eq/Layer[0]: Layer 1/Mask contains multiple framesets: FrameSet[0]: frames[0,37]" code="31"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: eq1_my_eq/TimeLine[0]: eq1_my_eq/Layer[0]: Layer 1/Mask contains multiple framesets: FrameSet[0]: frames[0,37]" code="31"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
I think, there are so many problems that we start to build the webpage from the beginning in html 5. Regards Marlise

It looks like you have a variety of issues here:
1) Missing fonts. Just like with anything else, you need to have the fonts you use in a file available on the machine where you are trying to utilize that file. I'm guessing the FLA was created on a different machine than where you ran Wallaby. Wallaby is just trying to make you aware that it is changing the fonts since it couldn't access the original font on the system where it was run.
2) Complaints about filters. At this time CSS3 doesn't support filters so these will be dropped in the FLA to HTML5 conversion. Starting with HTML5 will not help you here. You'd have to create your content in a different way in HTML5, change the content in Flash to not have filters, or just ignore the warnings in Wallaby and accept the visual differences. However, sometimes the visual differences w/o filters are too dramatic.
3) Complaints about compiled clips. Likely because of the use of components within the FLA. Wallaby doesn't support actionscript at this time and compiled clips use actionscript. Depending on what components you are using, trying to recreate similar content in HTML5 from scratch may be difficult.
4) Complaints about tween color transforms. These are effectively filters and fall in the same bucket as #2 above.
5) Complaints about dynamic masks. This first release of Wallaby only works with static non-moving content in masks.
6) Complaints about audio. This first release of Wallaby doesn't support sound.
We are actively working on a new release of Wallaby and will continue to add more features to make the transition from FLA to HTML5 easier.

Poor jpeg quality after converting from pdf.

I am trying to make a book video out of a collection of pdf files in Premiere Elements 11. Apparently Premiere does not take pdfs so I converted the pdfs to jpegs via Photoshop CS5. When I try to run the video the quality of the images is horrible - very pixalated and some of the text is unreadable. Even though Photoshop psd files are said to be useable I get the same results. Rendering did nothing. Help?

ksreid
What are the pixel dimensions of your jpegs?
For now, I will assume 1920 x 1080 pixels.
In Premiere Elements 11 Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset to:
NTSC
DSLR
1080p
DSLR [email protected]
After OK'ing the above, you will see the New Project dialog displaying your project preset.
Make sure that there is a check mark next to the option "Force Selected Project Setting on This Project" in the New Project dialog, and
then OK out of there.
Back in the Premiere Elements 11 Expert workspace, use Add Media/Files and Folders/ to get your source files
into Project Assets from where you drag the source files to the Timeline. Render the Timeline content and
determine if the quality of that content playback in the Edit area monitor is improved in comparison to your prior projects.
You might also explore applying fx Effects/Blur & Sharpen/Sharpen (just a little) to the Timeline content.
What is your intended export for your Timeline content?
Please review and consider and then let us know the outcome.
Thank you.
ATR

Absent AIF audio in CS6 after converting from earlier version

Similar Messages

Maybe you are looking for