Absolute navigation: link

Is it possible to instead of "ROLES://portal_content/myFolder/myRole/Content/iView/", just use a Quick Link created for iView (under Property Editor->Navigation) as a parameter for the method WDPortalNavigation.navigateAbsolute(..) ?

Hi Lieven,
As per SAP Doc
Performs a navigation to a absolute defined navigation target.
The assumption is that this navigation target uses the SAP application launcher.
All defined parameters are handled as GET parameters.
Regards,
Ayyapparaj

Similar Messages

Navigation Link failes : _layouts/15/AreaNavigationSettings.aspx fails to load on subsites

PROBLEM: The navigation link in Site Settings will only works on the root site. Any sub site I get the notorious "Sorry, something went wrong An unexpected error has occurred."
When I look at the logs I see the following that relate to the correlation ID below. Any ideas on how to get Navigation working?
This was caused when I migrated sites from one farm to another and only if I created a new site collection and replaced the root site with one from the other farm.
What I've Tried:
I've done this on other site collections where I moved the sites but made them subsites and did not overwrite the root site and the navigation feature works fine.  Even sites where I
didn't do a migration it worked great.
I've tried the following found at this link which seems to be the most popular solution but I've had no luck.
https://praveenix.wordpress.com/2014/03/16/sharepoint-2013-left-navigation-and-top-navigation-bar-does-not-render-links-and-shows-error-an-error-occurred-while-rendering-navigation-for-requested-url/
Anyone have any ideas on how to get Navigation working?
LOGS:
Application error when access /_layouts/15/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.GetInheritedNavigationCaption(StandardNavigationSettings settings)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.GetInheritedNavigationCaption(StandardNavigationSettings settings)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not
set to an instance of an object.     at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.GetInheritedNavigationCaption(StandardNavigationSettings settings)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
This also appear in the logs:
UserAgent not available, file operations may not be optimized.    at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb,
Boolean copyOnFirstWrite, Boolean disposeIlb)     at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult)     at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound)     at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath)     at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate)     at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.ApplyMasterPage()     at System.Web.UI.Page.PerformPreInit()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at
System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr
nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

Hi Craig,
I understand you encountered the issue with navigation link in the sites after migrated to another one.
The issue might be caused by
Navigation links that were added by site owners as relative links in the old site continued to work, and links that were added and managed automatically by SharePoint continued to work as well.
Please try the script in the article below and see if it fix the link:
http://sharepointtaproom.com/2014/11/12/how-to-fix-broken-navigation-links-after-sharepoint-upgrade-or-migration/
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to pass the values from one report to another using navigation links

Hi All,
I am facing a strange issue where I have to pass a column value from one report to other.
I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
Can anyone advice where I was going wrong
Thank you,
AO

Hi,
The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
mark if helpful/correct.........
thanks,
prasanna

Problem with Absolute Navigation (External Window) and Light Framework Page

Hi All,
We are using Light Framework page for the portal devolopment. We have an application including two webdynpro iviews where absolute navigation is used to traverse from first iview to second iview (When user clicks a button on first iview). We are showing the second iview in external window (SHOW_EXTERNAL). When ever i clicks the button to traverse to second iview, i am getting an exception.
When we are showing it in same window (SHOW_INPLACE), it is working fine. But the iview is appeared in half of the page with scrollbars. It is working fine with default framework page (with both options SHOW_INPLACE and SHOW_EXTERNAL) and dispalyed in original size as mentioned in iview properties.
Could you please suggest us whether there is any work around for this.
Thanks,
Sudheer

Hi Kathiresan
I couldn't see the address bar of the window (In which second iview is getting displayed). But i can observe no parameters that i passed from first iview is visible in the view source of the second iview (When SHOW_EXTERNAL is used in absolute navigation). I could see all the parameters in the view source (when SHOW_INPLACE is used for absolute navigation). But i am using the same url for both the options (for SHOW_INPLACE and SHOW_EXTERNAL).
I doubt about the url being passed when SHOW_EXTERNAL option is used. But when we checked in debug, The correct url is being triggered (Atleast from first iview). Is there any way that could display the second window with address bar. What is making difference between SHOW_INPLACE and SHOW_EXTERNAL with absolute navigation and light framework page.
Could someone please suggest.
Thanks,
Sudheer.

BI Report in Web UI - Cross Navigational Link

HI Gurus,
I made the neccessary customizing settings in CRMC_UI_NBLINKS to display my BI reports in the CRM Web-UI.
Now I want to use the 'Cross Navigational links for InfoObjects' to be able to navigate from a BI report to a CRM UI component.
I am using a report about activity partners (0BP_ACTIVIT/0BPARTNER).
My settings in CRMC_UI_NBLINKS for this report:
InfoObject: 0BP_ACTIVIT
Navigational Link ID: Z_XXX
Seq.: 1
Object Type: BP_ACCOUNT
Object Action: B Display
Text: BP Link
However in the context menu on the report I do not see any 'BP link'. I tried 3.x and 7.x web templates and 3.x and 7.x queries, no luck.
What am I missing?
Regards,
Michael

Hi,
We are facing the same problem.
Can you tell us how you solved it, if you did.
Thank you,
A.Morais & I.Llopis

Add the Z report to the Navigation Link

We are working on the SAP CRM 4.0 with Web client as a interaction center.
As per our requirement we need to add custom report to the navigation link.When the user clicks on this link the report should appear in Web client.
At present i am trying with SAP provided display customer functionality.That link is fetching me SAP Netweaver website instead of CRM BP transaction.
Pls advise as how i can i achieve this.
Thanks.

Hi -
Changes to be done in Z_QUINNOX_PAYMENT_SUMMARY
methods:
1. GET_ACTION_DEFINITION
class cl_crm_ic_abox_constants definition load.
concatenate cl_crm_ic_abox_constants=>bor_action
              'REPORT' "#EC NO_TEXT
              'EXECUTE' "#EC NO_TEXT
              'CRMSYS' "#EC NO_TEXT
         into rv_result.
2. CLASS_CONSTRUCTOR
class cl_crm_ic_abox_constants definition load.
gv_atype =
    cl_crm_ic_abox_constants=>bor_action.
gv_method =
    'EXECUTE'. "#EC NOTEXT
gv_bortype =
    'REPORT'. "#EC NOTEXT
gv_mappedlogsys =
   'CRMSYS'. " 'R3SYS46C'. "#EC NOTEXT
gv_version =
    '2.0'. "#EC NOTEXT
Is return data flow requested?
gv_is_return_df_requested =
    'X'. "#EC NOTEXT
similarly set the BOR obj name et all in the CONSTRUCTOR also....check the class 'CL_CRM_IC_ABOXSAMPLE_CREATESO' and make the changes accordingly.....you can ignore the t.code parameters which they have passed, jus add the relavant BOR obj details and the log sys details in the relavant places....
Now in ur BOR obj method 'EXECUTE', call the report using the SUBMIT prog stmt.....
This shd work.....
_Aarthi.

OBIEE Guided Navigation Link - How to open in New page.

Hi,
I am using Guided navigation links in OBIEE dashboards to link some of my reports.
When i click on the Link it opens the report on the same page. Instead i have to open the report in a new page. This Option is available in 'Link OR Image' section, not in 'Guided Nav. Link' section. Please suggest me if there is any way to achieve this.
Thanks
Swami

Hi
We have the same need: from within a report we have guided navigation to a detail report, that uses the values of the record in the master report as filterparameters. When clicking a row in the master report , we should open the detail report in a new window, while leaving the master report in the dashboard open. How can we achieve this?
Swami just mentioned the Link or Image object to indicate that this possibility of choosing the same or a new window is present there, and asked where to find the same choosing option for guided navigation.
Frits

How to Set Individual Managed Metadata Navigation Links to Open in New Window?

I am using a managed metadata term set for the global navigation in my client's site. Most of the global navigation links point to pages in the current site, and should open in the current browser window/tab as the end user is just navigating within the
site content. However, I have one particular node in the navigation term set that points to related content scattered around other external sites. The client wants these links to open a new window.
Unfortunately, I can't seem to set the target for navigation links in the term set. If I was using standard global navigation, I'd be able to select the "Open in new window" checkbox when setting up the link, but that option doesn't appear to be
supported via MMD navigation.
Any clever suggestions?
Thanks!

I had a similarish requirement at a client once upon a time, they wanted any links that went outside of the intranet web applications to open in a new window.
The way we managed that was to use jQuery to overwrite the standard hyperlink references for any hrefs that didn't point to internal sites to use the same javascript functions that SharePoint used for links configured to open in a new window. It worked out
as being about half a dozen lines; check the URL and if it doesn't begin with a set range of options then overwrite the on click behaviour using standard jQuery behaviour.
If you want it site wide then you just add jQuery and the code snippet to the master page, if you just want it in some places then add a CEWP or a HTML form web part to the relevant pages.

How to Open a Navigation Link in a new Window?

Hi guys,
I am trying to add a link to one of my team site. And i have activated the SharePoint server publishing infrastructure service. In the navigation link i am sure the clicked the check box open in new window. But i not getting the new window.
The link still open in the same tab. How to open it in new tab ?!!
I am using SharePoint 2013. I am using free trail pack.

Hi
one way is to code.
open the page using Deisgner, goto that hlink, and insert inside it target="_blank"
like
<a href="the_URL" taget="_blank">you text or a xslt tag</a>
Alose check this article
http://www.w3schools.com/HTML/html_links.asp
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Using variables as filters in analyses launched by Guided Navigation links

I'm trying to build a navigation link that will launch an analysis and have the filters in that analysis respect the values of either Presentation Variables or Session Variables. I'm having success with an ordinary column. I'm not having success with a number that I need to type into a prompt.
Here's what I've done so far:
1. Created a dashboard prompt based on the Month column. When a Month is selected, that selection populates the Request (Session) variable called Selected_Mo
2. Created an analysis with:
- a filter on the Month column: = Selected_Mo
- the Month column
- a column showing the value of Selected_Mo
3. Placed both of those onto a dashboard page. When I select a value of Month, the month in the analyis changes, and the column showing the value of Selected_Mo changes. So far, all is good.
4. Placed an Action Link on the dashboard. That action link launches the same analysis that I can see on the dashboard.
5. Clicked the action link. The value of Month that I selected on the dashboard is shown in the analysis.
Now, I'm trying to do the exact same thing with a numeric entry field in a dashboard prompt, and I'm running into a stumbling block. I want to type a number into a field in a dashboard prompt, and populate a session variable called Change_Pctg. Selecting "Variable Prompt" in the dashboard prompt only lets me populate a Presentation Variable. But no matter. I've created a "dummy" field like we used to do in 10g, just creating a Column Prompt against a column formula of 1.
When I put the analysis onto the dashboard, it's correct. I can enter a number into the dashboard prompt field, click Apply, and that value is shown in the analysis on the screen. I'm filtering against that value as well, and the number of rows is right. So I know that I'm setting the value of that Change_Pctg session variable.
But when I click the action link, only Selected_Mo is respected by the target analysis. The Change_Pctg session variable is ignored.
Any thoughts?

I'd like to abort this post. I've been able to replicate the error using a much simpler method. Refer to the post entitled 'Passing Presentation Variables to Guided Navigation'.

Absolute navigation issue

Hi
I am trying to go to the ESS main page using the following code in my WD ABAP application but it is not working.
please help
        CALL FUNCTION 'HRXSS_SER_GETAREAGROUPLINK'
          EXPORTING
            areagroupkey         = 'Z_TC_SAPDEFAULTESS_ERP2005'
            portalcontext        = 'X'
            personnelnumber      = lv_empno
            countrygrouping      = lv_molga
          IMPORTING
            areagrouplink        = lv_arealink
          EXCEPTIONS
            areagroupkey_invalid = 1
            OTHERS               = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
*Get portal manager reference
      l_api = wd_this->wd_get_api( ).
      l_portal_manager = l_api->get_portal_manager( ).
*Absolute navigation started
      l_portal_manager->navigate_absolute(
      navigation_target = lv_arealink-linkpcdpage
      navigation_mode = if_wd_portal_integration=>co_show_inplace
      history_mode = if_wd_portal_integration=>co_no_duplicates
All the variables used are filled correctly. PCD path appearing in v_arealink-linkpcdpage is trunckated but it is of string type. And I suppose it will be holding the full path though it is displaying only 255 characters of it.
Thanks
Vishal Kapoor

closing

Purchase Order Authorization through Navigation link

Hi
   I am having an requiremnet like these........
        1) 2 users entering purchase orders in diferent systems alternatively.
        2) After entering purchase order 1 user didnt allow to see other user purchase order through navigation link he can see other user purchase order
           (Note:if he navigate means only that particular users purchase orders only have to display)
        3)only manager user have to see all the users purchase order.
   Is there any Authorization will be there to acheive the above process.
Regards
Vinoth

Hi Vinoth..
Check with the data ownership authorizations.
https://help.sap.com/saphelp_sbo882/helpdata/en/45/05bc8224a70489e10000000a155369/content.htm
Regards
Kennedy

Facing issue in PDF print on using Guided Navigation Link on dashboard

Hi,
I am facing one issue on using Guided Navigation Link on dashboard.
I have created one Guided Nav. Link on dashboard and renamed it as "RAW DATA".
It was working fine.It is coming as RAW DATA link and when I am clicking on the link it is drilling down.
Till now it is working fine and good.
But in Printer friendly option of dashboard when I am selecting PDF option( To save it as PDF) it was showing text "Guided Nav Link 1" instead of "RAW DATA" in the downloaded pdf.
Please give me some solution.
Thanks in Advance
Santanu Manna

Try this:
1) Drag Guid. Nav. Link to dashboard in a new section.
2) Click on properties of the Guid. Nav. Link object.
3) For the source request, click on browse and navigate to the report.
4) In the Link Properties, check the "Use Dashboard Oject name as link object" checkbox and click "OK."
5) Click on the Rename button of the Guid. Nav. Link object.
6) Type in the name you wish to appear in the link and click "OK."
When you click on Print>PDF, the name of the link will appear in the pdf instead of "Guid. Nav Link 1."

IWeb Page Navigational Links not working with Internet Explorer 7

I'm hoping someone can help me out here? My wife created her 1st website using iWeb. I am testing the sites functionality before we publish it. All the pages and links work fine on Firefox and Safari for windows. However, the page navigational links are not working on Internet Explorer 7. All I see is a dot to the left side of where the page links should be. When I start the site in IE7 I get an Active X script warning and I am asked if I want to allow the script to run; to which I reply yes. After I allow the Active X script the dot to the left side of where the page links should be disappears, but the links do not appear.
Is there anyway to resolve this? Most of the members of her club have Windows based PCs and are using IE7.
Message was edited by: cviz821

Yes, Javascript is running on IE7 and other java script applets appear to be working with the exception of the Navbar script.
It would be great if my wife's friends used a "real" browser, unfortunately 70% of the people on the web use IE7, so this is a real concern if we can't get this to work. I'v seen other iWeb site on IE7 that seem to function fine, so I'm not sure what the issue is here.
Message was edited by: cviz821

Iweb navigation links not working

Hi there i was wondering if someone could help. I have done my website in iWeb 3.04 (601) The navigation links on my website are not working. I have tried turning the navigation menu on and off, it worked temporarily and then stopped. The website is www.cut2fitness.com Id really appreciate if anyone knows what I can do?
MAny thanks!

Your navigation is covered by this image which has a lot of wasted space around it...
You need to crop it down to size. The image is 810 x 862 but the area with the text is only about 350 x 400.

Absolute navigation: link

Similar Messages

Maybe you are looking for