ABT1 and ABT1N using different transactiont types

Hi,
An issue was identified whereby SAP may be computing tax depreciation incorrectly in a year in which an asset converts to straight-line and is transferred.  This could potentially apply to all of the tax books in SAP.  Transaction type 153 (incorrect) vs. transaction type 145 (correct) for assets that have been converted and have a "multi-level" depreciation key.  Second level is incorrect.
This is because earleir they were ABT1 which was using transaction type 145. The new transaction ABT1N is using transaction type 153.
Best Regards,
V

he different dbs yre using different sql flavors. This is causing trouble if you change the connection to a db which is using a different flavor. I'm not aware that you can change the flavor used to build the queries to, but you can implement your own sqlbuilder which may just extend from the one for hte right flavor and then build the sql through the right class.
Check http://jobinesh.blogspot.com/2013/02/customizing-sql-builder-class.html for more info on how to change the sqlbuilder.
Timo

Similar Messages

  • G3 B&W and Sawtooth use different memory?

    Hi. I tried to add some memory modules to my new-to-me Sawtooth that were pulled from my older B&W. They didn't seem to work.
    Am I correct in surmising that the memory is a different type in these two machines, and hence incompatible?
    MTIA...Matt
    PowerBook Titanium G4   Mac OS X (10.4)   Also PowerBook G3, eMac, and misc elderly models

    A quick way to tell - if there are only three RAM slots, it is a Digital Audio model and needs PC133 RAM; if there are four slots, it is a GE, AGP, or PCI model and can use PC100 RAM.
    This necessitates a physical look - Apple System Profiler usually reports four slots for a DA, even though it actually has three.

  • Want to use different valuation type for one finish in house prod. materia

    Hi,
    Please update on subject requirement of different valuation type for same finish in house produced material.
    We take e.g. as below
    Valuation type -1) VA01
                             2) VA02
    Want to assign both valuation types to material FINISH01
    Then, i want create process order as per valuation type VA01 & VA02 ,let consider for 5 quantity each. While creating process
    order, system shoulf propose selection of valuation type.
    Regards,
    Chetan

    Hi,
    use Split Valuation, When u do the GR against production order...System will ask valuation type.
    and Same material code with maintained with different valuation type in your inventory.
    Regards,
    Pardeep Malik

  • Need links for creation varaibles using different processing types....

    Hi All,
    can you provide me   links for creation of variables  using diiferent processing types...
    it would be grateful if you  peovide any links which covers all most all the topics in bi reporting....
    Thanks All.

    Hi,
    Pl refer to following link as well
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0b25093-b548-2e10-0cba-fcac7890585f?QuickLink=index&overridelayout=true
    Customer exit for text variables
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d343131313235%7d
    http://help.sap.com/saphelp_nw04/helpdata/en/61/579b3c494d8e15e10000000a114084/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d313535373530%7d
    Thanks and regards
    Kiran

  • QBE issue when using different db types

    Hello,
    Our ADF application has the ability to connect to the same schema but different backends (Oracle and SQL Server). I have successfully implemented switching the AM data source. I am running into a syntax issue when performing Query By Example for a table. The error is (Incorrect Syntax near "|"). In the VOImpl I overrode the function public String getViewCriteriaClause(boolean forQuery) and I can see the viewCriteriaClause is "( (UPPER(TransMasterEO.TMMessage) LIKE UPPER( ? || '%') ) )". This works when running against the Oracle instance but fails when running against the SQL Server instance.
    I implemented code to replace the "||" with "+" but then we fail on Oracle. Can someone recommend an approach to resolve?
    Running 11.1.1.6
    Thank you
    Rudy

    he different dbs yre using different sql flavors. This is causing trouble if you change the connection to a db which is using a different flavor. I'm not aware that you can change the flavor used to build the queries to, but you can implement your own sqlbuilder which may just extend from the one for hte right flavor and then build the sql through the right class.
    Check http://jobinesh.blogspot.com/2013/02/customizing-sql-builder-class.html for more info on how to change the sqlbuilder.
    Timo

  • Misc transactions running total turns blank when using different exp type

    Hi,
    I would like to ask for some advise on how to fix this issue:
    When entering miscellaneous transaction with 2 different expenditure type (Labor and Material) the running total will be blank. But if we enter the same expenditure type (both Labor or Material) the running total will have values.
    Any idea how to fix this? Thanks!
    Application: 11.5.10.2
    Edited by: JulieAnn on Mar 27, 2012 11:21 PM

    This was fixed by changing the "Pixel Format" in the catalyst control center to "RGB (Full RGB)".. Somehow it got changed to "YcBcr".
    I removed the /etc/ati/amdpcsdb file that the fglrx driver likes to put settings in and did a fresh reinstall of catalyst-test and everything looks good now. Really no idea how the pixel profile got changed. Also noticed that my resolution was much lower than it should have been (which for some reason doesn't affect XBMC which runs in native resolution no matter what?), but that was an easy fix of adding Mode "1920x1080" to my Display section in xorg.

  • Trouble with channels and clients using different 802.11 g/n adapters

    Hi,
    I have moved to a new home and I have a lot of problems with the wireless network
    I have configured the airport extreme to use the "802.11n draft" with backward compatibility to b ang g at 2,4 GHz.
    I had to manually select channel because the "Auto" option will probably use channel 6 and in this way all my clients are unable to connect.
    After many tests I have found that I cannot use channels from 4 to 9 because my macbook airport card will not detect the wireless network. Channel 1 seems to be the best choice but it is used by other people in the near homes also.
    With channel 1 my macbook is able to connect and mantain a stable connection, the signal is about 35%, unfortunally other clients (using windows XP, broadcom wireless adapter or a d-link DWA-140 USB key) are unable to have a good and stable connection: it is always "low", "very low" or not available
    Using the D-Link DWA-140 wireless config utility I have discovered today that channel 5 seems to be the better for such device: using channel 5 it is able to connect windows clients from everywhere with good or excellent signal BUT my macbook wireless results completely dead instead :-/, the same for broadcom client.
    D-link is unable to connect if I set channel 6 to 9 also.
    Macbook is unable to connect to 5GHz 802.11n pre-standard, D-Link is able instead.
    I have no cordless phones or running microwaves in the kitchen, the only thing I have is an home alarm using infrared and microwave sensors in each room. But they told me that they are using a frequency range much different from 2.4 GHz. Unfortunally I am unable to completely power off them and test some more.
    May be that near homes have cordless phones, wireless routers or video/audio repetitors, I don't know. I also have much iron in my walls. It is very strange that d-link can use very well channel 5 while other wireless cards/clients are unable to find any network there.
    I am going to become creazy... if I was able to explain the situation, could anybody help to investigate some more or try to solve?
    thanks a lot in advance!
    Fabio

    may be I have found the cause of all these troubles: the alarm motion sensors installed in each room.
    I have made a search in the Internet and I have found the technical details of my sensors: microwave tecnology used by them is exactly using the frequency of 2.45 GHz :-/
    So I have moved outsite of my hause the Airport Extreme and notebooks to confirm my suppose:
    all channels were perfectly working, "auto channel" selection was ok, macbook was able to connect at 5GHz 802.11n mode. Windows client was ok too with all wireless cards or USB devices.
    The alarm sensors seem to be always active and seems not possibile to have them completely off when the alarm is not activated.
    I think I am going to switch them to a different version that does not use 2.45 GHz microwaves.
    It seems the solution to my troubles.
    Hopes this helps somebody else.

  • Rounding up off values using Different Condition types

    Dear All,
    There is a requirement from the client where they want to round up the values in all the condition type values.For Example:
    ZPR0-           1525
    ZCOM(15%)-  228.75(It Should be 229.00)
    NBT(Tax2%)   25.93(It Should be 26)
    Similarly all the values for the condition should be calculated as the above mentioned scenario .Kindly suggest
    Thank You!
    Chakradhara

    1.In V/06 goto the respective conditions type and in rounding rule field maintain A
    2.goto pricing procdure in v/08 in calculation type field maintain routine 17 against the condition type s
    3.in OB90 maintain 100( rounding unit) against your company code then check the results.
    Thanks
    Srinu.

  • SQL Plus and ODBC w/different database types

    In order to connect to Oracle lite, we go through ODBC in SQL Plus (ex:login/pw@ODBC:polite)
    Can I utilize this method to connect SQL Plus to a SQL Server 7 database and from there run the COPY TO command to copy data into my Oracle database? If so, what do I need to install to make this work? Is there a specific version of SQL Plus that this works with?

    examples:
    - optimizer_mode is 'RULE' when I select using SQL*Plus and 'CHOOSE' when I use SQL*Plus Worksheet.
    - large_pool_size is 32Mb when I select using SQL*Plus and 108Mb when I use SQL*Plus Worksheet.
    etc.

  • Use of different material types

    Hi Experts ,
    My client is thinking of expansion of its plant . This new plant would be copy of their already existing plant at another location . Now some of materials for manufacturing finish materials are same in both plants but they both use different material types . That is here there is only one mat type where there they use 4 mat types .
    Now do I need to create new plant here or I can use the same existing plant for creation of new materials ? If I want to use the same plant then would be the effect on valuation of mat. Can these mat with different mat types be transported successfully ?

    Hi Neal,
    So you did enjoy your weekend!!! Good good; well you go to IMG ( SPRO ) and on to ENTERPRISE STRUCTURE >> ASSIGNMENT >> LOGISTICS EXECUTION; and just in case you miss out the warehouse number, ENTERPRISE STRUCTURE >> DEFINITION >> LOGISTICS EXECUTION . You will find the links there. Unfortunately I created a screenshot for you but I just do not know how to attach it.
    The list I was talking about was MRP List or Stock overview list ( MD05 / MD04 ). There are two more transactions that I think might come in handy. Check them out:
    LS26 - stock overview of warehouse.
    LL01 - warehouse activity monitor.
    Since the plant and warehouse will be linked, I guess there would be no discrimination on checking stock but I am pretty sure system checks warehouse stock first. That is the entire procedure. I hope it helps. Do reward points if I was able to answer your query.
    Regards,
    Sreekant.

  • Different movement types in MM documents in SSR

    Hello,
    How can I use different movement types in logistic documents for meter readings?
    I set up additional meter event for own consumption and I need to get logistic document with other movement type (as standard we running creating logistic document types an 251/252 movement types for fuel sales).
    To realize at least those two types of sales wehave only two possibilities in the system:
    1. Setup separate processing profile for location for purpose of own consumption.
    The stop over point is only one processing profile can be assigned to the location at once.
    2. Setup a new process with new movement type.
    The stop over point - restriction in the customizing - only one main process can be used for posting based on meter readings (error message OQ_C601 "More than one entry selected as main MM process for location indicator 01").
    How can I solve this issue?
    Thanks and KR,
    Sergey

    Solved

  • Different movement types for goods issue via outbound delivery

    Hi gurus,
    How can I use different movement types for goods issue via outbound delivery?
    Thanks&Best Regards,
    Burcu

    To use different schedule lines, we need different item types and different document types. Is that right?
    Is there a user exit in outbound delivery to post goods issue?
    Thanks...

  • IN MATERIAL MASTER RECORD WHAT IS THE USE OF CLASS TYPE(CLASSIFICATION VIEW

    Hi Guys,
    Can you please explain what are the different critiria to use different class type and what exactly meaning of the each class type with respect to Material classification.
    Any material available on this to study. Please give link.
    Thanks,
    Dhanu

    Hi,
    Purpose
    The classification system allows you to use characteristics to describe all types of objects, and to group similar objects in classes u2013 to classify objects, in other words, so that you can find them more easily later.
    You then use the classes to help you to find objects more easily, using the characteristics defined in them as search criteria. This ensures that you can find objects with similar or identical characteristics as quickly as possible.
    Integration
    The classification system allows you to classify all types of object. First, you must define certain settings in Customizing for the classification system. For more information, see Customizing for the Classification System.
    SAP has predefined a number of object types (for example, materials, and equipment). The settings for these object types have already been defined in Customizing, so you can start to set up your classification system for these object types without defining further settings.
    Features
    Before you can use classification functions, you need to set up your classification system.
    The there are three steps to setting up a classification system:
    Defining the Properties of Objects
    You use characteristics to describe the properties of objects. You create characteristics centrally in the SAP R/3 System.
    See the SAP Library, Characteristics (CA-CL-CHR).
    Creating Classes
    You need classes to classify objects. These classes must be set up. During set up you must assign characteristics to the classes.
    Assigning Objects
    Once you have created the classes you require for classification, you can assign objects to these classes. You use the characteristics of the class to describe the objects you classify.
    This completes the data you require to use your classification system. You can then use your classification system to find objects that match the criteria you require.
    Once you have set up the classification system you can use it to find certain objects. To do this:
    Find a class in which objects are classified
    Find the object(s) you require in the class
    When you use classification to find objects, you use the characteristics as search criteria, and the system compares the values you enter with the values of the classified objects.
    Uts
    Award if helpfull

  • One message type different IDoc Types

    Hi All,
    Can we use one message type and different data types based on the requirement in PI mapping.Basically  I want to select mappings based on IDoc ...My requirement is to use different IDoc types for one message type in mapping ...will it work ?
    Thanks ,
    Vinay.

    If you will be wanting to have 1 message producing different IDOCS types  (to be meaning that not just multiple IDOCS of the same type) then this must be done via a BPM as the IDOC adapter will not be able to handle it by itself.  Have a receiver determination step in the BPM for each IDOC type - you'll then be sending each via foreach block.

  • Photoshop CS 5 crashes after updating and then using File -- Automate -- Batch

    I am running Photoshop CS5 (build 12.0.4 x32) on my XP 32-bit machine and have done so without major problems until about a week ago.
    Then all of a sudden when accessing File --> Automate --> Batch the program crashes and I have to force it shutting down manually after which I can restart Photoshop. When trying to access the batch command hereafter the same crash reappears rendering batch commands useless.
    I thought about posting here but then decided to reinstall Photoshop again. This enables the fully working software including batch commands once again. However after a short while the update software asks to download and install some patches for all programs. After doing so the same problem happens again in regards to the batch command. Photoshop crashes when accessing it and won't work at all.
    I now repeated this procedure twice and have no idea what to do about it.
    Is there anybody that has had this experience or knows about a solution?
    Do I have to contact Adobe with an error report?
    Any help and comment is welcome and mostly appreciated.

    Chris Cox wrote:
    Yes, a change in the Adobe update made the existing scanner bug show up more frequently.   No, that does not make your statement correct. The bug exists in the scanner driver, and existed before the Adobe update.
    The Adobe update is not the cause of the bug, it just made some unrelated change that made the bug appear more frequently.  That could be something as simple as putting different values in different locations of memory.  We don't know. Only the authors of the scanner driver can know for sure why it is crashing more often now.
    Photoshop supports the TWAIN standard, but cannot be responsible for the bugs in the third party drivers that attempt to implement that standard.
    The high frequency of bugs in TWAIN drivers is what made us move the TWAIN plugin to "optional" status in the first place -- because too many people were crashing, had a hard time figuring out the cause, and blamed Adobe for something completely beyond our control.
    And we already do inform scanner vendors about all the bugs we find in their drivers. But we cannot force them to fix their bugs, nor can we know the nature of all of their bugs to code around them.
    I understand that you're angry.  But please stop trying to blame an innocent bystander.
    Adobe cannot do anything to fix the bugs in your scanner driver. Only the authors of your scanner driver can fix the bugs in your scanner driver.
    Until they provide an update to fix the bugs in the driver, your choices are to keep crashing, or not use that buggy scanner driver.
    I am going to make this short.
    It depends on how you look at it. From your angle, Adobe did their's and the scanner companies are to blame for their buggy software. What you are saying here would be - if compared - resemble a situation where you would go to a car dealer, buy a car, then drive away just to find that the trailer tow hitch you attached your old trailer to would keep falling off all the time. When confronting the dealer about the issue he would reply to you that you have to talk to the manufacturer of the trailer because the problem is their responsibility. How would you as a client react...?
    Maybe it is true that the driver software is buggy. However it still did work though under other conditions before this update. That means that you updated something that made these things appear frequently. Maybe you don't know and only they do. Fair enough. But us customers don't have to work these problems out or live with them nor do we have to use our time on posting and fixing companies' errors and mistakes. That's what we pay you for. We only need to use this application hassle free on the spot. Maybe you should start crash testing in an controlled environment before you apply these updates and then post them. Or make a deal with those companies to do so for you. Maybe they will then ignore you or won't tell you about possible bugs to hike their own skin. Fair enough as well. Create some sort of program, a label or whatever that you apply and hand out only to those companies that are "certified by and working with Adobe software" and that they can put on their products or you on your very own Adobe website for all us customers to see and to use as a type of guidance in order to have working hardware and applications and avoid these errors.
    There is this saying that goes...
    "Where there's a will, there's a way"...!

Maybe you are looking for