ABT1N Error - Transfer to Non Affiliated Company with Manual Revenue

Posting with transaction type 210 is not possible here, see long text
Message no. AAPO177
Diagnosis
Transaction type 210 has a depreciation area limitation, although posting is not mandatory in all of the depreciation areas entered. However, it is not possible to select depreciation areas in the current transaction.
Procedure
Check the specifications for transaction type 210 or use transaction ABT1 to enter the transaction.
Can anyone shade light on preconfiguration of intercompany & intracomapny asset transfer (with revenue & without revenue)
Edited by: Rupesh Pillay on May 19, 2011 11:20 AM

Dear Rupesh,
Go to transaction AO74 and double click on transaction type 210, there in posting type section choose selection button as Post to affiliated company and Gross and SAVE.
I hope by making the above changes, you will able to post the Intercompany asset transaction.
This will help you to solve you issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Similar Messages

Asset transfer from an affiliated company with depreciation

Hello - Can you tell me how I can translate the following business scenario in SAP ?
1) An asset is purchased from an affiliated company. This company is represented as an inter-company vendor in our company code.
2) The initial value of the asset in affiliated company is 100 EUR. And it is depreciated with an amount of 30 EUR in the affiliated company.
3) In our books we would like to show the depreciation in the legacy system and continue depreciating the asset with NBV 70 EUR.

hi
post an FI Document with transaction type 145 or 146 and check

Error: there are non exicisable item with cenvat tax code

I am getting an error message there are non exicisable item with cenvat tax code while trying to add po for pick and pack from sales order. I request all of you to help me with it.
I have already checked if the item and ware house is exicisable in the check box of the master data.
Best regards,
Sandesh.Sreyamsh

Thanks mahendra and rahul,
Unfortunately my issue is not solved yet, the tax is not manually created it was created by sap during new company creation. I checked by adding other tax type in sales order but every time when I try to create sales bom it gives the above error.
@ Rahul the tax is under cenvat type and the Items has been added under exercise transaction. here is what im trying to do
I created a sales order for 4 of my items.
Then i try to create po for two of my as pick and pack items by checking Purchase orders indicator under logistics tab of sales order.
At this point i am getting the above said error.
All the items i am trying to add is exisable and tax is also of cenvat type.
Please help me out of this as im stuch very badly in this issue.
Regards,
Sandesh.Sreyamsh

Error: 'Transaction type not possible (no affiliated company specified)'

Hello,
I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN
It get the error message: 'Transaction type not possible (no affiliated company specified)'.
I could go to AO76 to mark the 'post to affiliated company'.
How can I check which transaction type it uses? With the transactio type group? Or something else...?
Regards,
Pamela

Hello,
actually, the problem lies with the transfer of assets under construction to low value assets with are happening in the CURRENT year, and not the previous year. AuC to LVA transfers from previous years are allowed, but not the one in the current year. Because it uses a different transfer transaction type... The transfer variant 4 (= transfer within company code) is the correct one I assume.
Regards,
Pamela

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error "Package in non-original system only modifiabl with Organizer Tools"

Assign Customer Objcet PROG to Package "Z001"(created by myself),it pop-up error "Package in non-original system only modifiabl with Organizer Tools"
how can i deal with this error?
could any warm-hearted fellow give me some tips ?
tks a lot !

Hi sophie,
i think you transported this package from another system to a new system and you are trying to modify the package.
just have a look at below link hop it will help ,otherwise let us know
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm
cheers
shibu

Error no. 4 in SAPGUI with Graphics call or file transfer

Hi Experts,
I have a requirement that is " I need to display the selected data from database table in bar chart".
I am using the Function Module " GRAPH_MATRIX_3D ".
I am getting the following error message.
" Error no. 4 in SAPGUI with Graphics call or file transfer "
Please can any one help me on this,
It is very urgent I need to deliver this to client very soon.
Please.....
Thanks
Basu

Hi,
have a look at the pdf that comes with the download package. It describes how to structure your data (depending on the chart type).
Use the Chart Designer to create your customizing settings (chart type, colors etc) and save them as a customizing XML file.
Finally have a look at report GRAPHICS_IGS* that shows how to use the XML in your own report and send them to the IGS (by using the class CL_IGS_CHART_ENGINE).
Regards, Kai

Stock transfer between plants in a company with different price

Hi, expert,
i want to transfer materials between plants inside a company with different price which set by supply plant randomly, not the valuation price, how can i achieve this?
Thxs & best wishes,
David

Hi,
In short, you cannot.
Within SAP you cannot make a profit or loss by transferring an item between two Plants within the same company code.
This is not necessarily an SAP restriction as such, it is due to basic accounting rules.
The company code is seen as the legal entity for accounting and so if a movement within that company resulted in a loss or profit then this would break the rules.
I am not saying that it is impossible to set it up this way (nothing is impossible) but I personally recommend that you find another way of achieving this. Trying to modify the system to break such an important rule will definitely cause problems.
In previous implementations I have used the following option.
Simple use basic STOs that transfer the items at the material valuation price. But then at the end of each month produce a report that shows what materials have been transferred between the relevant plants and at THAT stage make a financial posting to reflect the "benefit" that has been realised (based on prices held in a new table, that represent the price that would have been charged).
It does appear to be a failing of the SAP system but it really isn't. What it normally indicates is that somehow the wrong org structure may have been built and perhaps the two plant should really be attached to separate company codes (especially if you need to show "profits and loss" in this way)?
Steve B

SBWP - Error no. 11 in SAPGUI with Graphics call or file transfer

Hello,
I need help, Iu2019m trying to attach a file in a workflow, transaction SBWP, but the following error occurs Error no. 11 in SAPGUI with Graphics call or file transfer. Does anyone know what can be the reason?
Thank you and kind regards,
helena

Hi,
have a look at the pdf that comes with the download package. It describes how to structure your data (depending on the chart type).
Use the Chart Designer to create your customizing settings (chart type, colors etc) and save them as a customizing XML file.
Finally have a look at report GRAPHICS_IGS* that shows how to use the XML in your own report and send them to the IGS (by using the class CL_IGS_CHART_ENGINE).
Regards, Kai

Running JVA & Non-JVA Company Codes with a single Controlling Area

Hello,
I am currently working on a consolidation project. Our scenarios will involve activating JVA in some company codes while it is not activated in some other company codes. We intend to maintain a single controlling area in CO for all these company codes i.e. JVA and Non-JVA company codes have a common controlling area.
I would like hear from gurus that have implemented or a are supporting a scenario in which JVA and Non-JVA company codes share a common controlling area. I'd like to know if the technical and/or operational challenges of this scenarios, if there are any issues to keep in mind and possible work-arounds.
Any help in this regard would be appreaciated.
Thanks.
Oluwafemi.

Hello,
From FI/CO/JVA perspective there should not be any issues, even if two company codes one JVA active and other non JVA active are there in the same controlling area.(I have been part of the implementation where both JVA and non JVA company codes resides in the same controlling area)
Its important to ask from consolidation purpose are you going to use any of the JVA table. If yes then you have to be careful because non JVA active company code information will not be stored in the JVA table.
It would be gr8, if you can share some of the apprehension from consolidation perspective, so that we can elaborate on the issues.
Thanks & Regards
Kalpesh Chavda

Transaction type 100 not possible (posting to affiliated company)

Hi All SAP Guru's
I am trying to post asset acquisition through F-90
Asset Dr Transcation Type 100
To, Vendor Cr
while saving the above document i am getting an error Transcation type 100 is not possible (Posting to Affiliated Company)
to explain further my client are using Trading Partner Concept, may be that is the reason document is not getting posted
In Transcation Type I tried to change Post to affiliated Company then system allowing to post the document, but in real sense we should not give post to affiliated company at Transcation Type
can anybody help, is there any alternative to go ahead
Regards
Sreenivasulu
Edited by: sreenivasulu VAS on Feb 26, 2009 1:57 PM

Hi,
When there's a trading partner in the document, you need to use a different transaction type for external acquisition.
Have you tried this? (I've used this one. without chaging document type setting)
150 Acquisition from an affiliated company
Difference from Transaction type 100 is posting type. 150 has a posting type of 'Post to affiliated company' whereas 100 has not.
Check with IMG (T-code: AO73)
Heeseon.

Transaction type ZGC not possible (posting to affiliated company) in ABSO

Hi all,
We have depreciation areas 01, 30, 31, 32 .
dep area 30, 31, 32 inherits the values from 01.
We want to post credit value to dep area 01 after doing the aqusition .
Hence we created a seperate transaction type ZGC ( in aqusitions- Tcode AO73) and limited it to dep areas 01, 30, 31, 32.
Transaction type ZGC is having credit and " do not post to affliated company " radio button is selected.
Now the issue is when we run ABSO to do a credit post in dep area 01 we are getting the below error .
Transaction type ZGC not possible (posting to affiliated company)
Message no. AA390
Diagnosis
For the current document, you specified either implicitly (via the customer/vendor), or explicitly (with a manual entry), that this posting is to an affiliated company. In this case, Asset Accounting requires you to use special transaction types. This enables the system to separately identify such transactions.
Procedure
Check the line items that you have already entered, and the transaction type you entered.
Not sure why it is asking for affliated company .
It will be great if any one help on this why we are getting this issue.

Hi Daya,
Please try to choose Trans.Type 100 in AO73 transaction code and select the radio button Post to affiliated company under Posting type.
Thanks,
Kumar

Transaction type 100 not posible (posting to affiliated company)

Hil
While asset acquistion posting in f-90 ia geting error message "Transaction type 100 not posible (posting to affiliated company)"
can you please give solution for this one

Hi
pl check following settings in spro Img->Financial Accounting-Asset Accouning----Transctions--Acquisitions-Define Transaction Types for Acquisitions-in choose activity window -dbl clk on "Define Transaction Types for Acquisitions"
select transaction type 100--click on details--check posting type. if " Do not post to affiliated company." is selected then choose another transaction type which allows acquisition with option "Post to affiliated company"
regards
Vishwas
Edited by: Vishwas_bapat on Mar 24, 2011 1:24 PM

Issue in ABT1N(Intercompany transfer) - expired/remaining life

We are executing ABT1N for Inter company tranfer.
In Transfer variant, field transfer Group 19 & 20 - we have selected copy check box.
(Accounting is perfectly alright)
However, when we execute this transaction, expired/remaining useful life is not getting copied correctly into new asset.
Copying pattern is for example:
Old asset                                                       New Assets
Useful life            4 years                                4 years
Expired Life         3 years 8 months                  4 years 4 months
Reamianing life    4 months                              Nil
Above indicates that for new asset - Expired life, year is copied from Useful life(old asset) & period(month) is copied from Reamaining life(old asset). This is incorrect.
Kindly advise any suggestion/corrective action so that Expired & Reamaining life are updated correctly in New Asset
Thanks
Nikhil

Hi Prasad,
Please reconfirm whether you maintained AO90 settings for below mentioned items..
Contra account: Acquisition value
Acquisition from affiliated company
Please find below the expected entries.
Best Regards,
Madhu

Transaction type 180 not possible (no affiliated company specified)

Hi,
I am trying to do the down payment Request in F-47 with Purchase order and asset. When I am trying to do this by giving the Asset number and Purchase order with Item 10. I am getting this error Transaction type 180 not possible (no affiliated company specified). The vendor is also not linked to trading partner and not an affilated company specific.
Please help me solving this issue.
Regards,
Raj

Hi Raj,
If in OBY6, no company ID is defined for company codes, they are NOT affiliated companies and the opposite.
Please check also via OBA7 (document type), if the field "Enter trading partner" is flagged
If yes -> you need to use a transaction type (AO74) which post to affiliatedcompany
If no -> you need to use a transaction type which does NOT post to affiliated
Best regards Bernhard

ABT1N Error - Transfer to Non Affiliated Company with Manual Revenue

Similar Messages

Maybe you are looking for