ABUMN icons not active

The icons in tcode ABUMN (multiple assets) at the bottom of the screen are mostly grayed out. Does anybody know if these can be activated? If so, is there a specific security authorization, etc that does this?
Thanks
Message was edited by:
Steve Grammel

Hi,
it's only excluded here (by tcode ABT1N and ABAKN);
* Mehrfachkontierung nicht bei Anlagentrasnfer
   IF SY-TCODE = GC_TCODE_ABT1 OR
      SY-TCODE = GC_TCODE_ABAK.         "<0562532
      GT_EXFUNC-FCODE = GC_FCMULT.
      APPEND GT_EXFUNC.
   ENDIF.
regards Andreas

Similar Messages

On transaction FBL3N report change layout and save layout icons not activ

Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeed

Hi,
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70.
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: You can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
I guess that your user-id have set activity 03 for this object.
The SAP notes 374656 and 409190 are recommended.
So, if the values 01 and 02 are not included, then
the user can't change and save layouts.
For the line item display in FI the authorization
object FI_IT_ALV has been created as an extra security check in addi-
tion to the ALV authorization object S_ALV_LAYO.
Please check note 374656 where you should be able to find
relevant info about this. Also note 637554 should be helpful.
Regards,
Aidan

FBL3N change layout and save layout icons not active

Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeed

You are missing an authorization object in your user profile. Run FBL3N and then run SU53 to see which auth obj is missing. Then send those details to your Security.

Tool/Menu bar icons not active - Acrobat in BROWSER

I have installed the SP1 update of windows 7. I have the latest version of Acrobat 10. I also have the latest version EXPLORER (9) & FIRE FOX (4). The PDF file comes into the BROWSER & the Acrobat icons (print, save) show up on the tool/menu bar but are not active. The commands are active with the RIGHT MOUSE BUTTON.
Also, links to other web sites (URL's) within the PDF document are not active. ie. Does not LINK.
If I force ACROBAT to open as an independent program everything works OK.

Have you solved this yet? Perhaps trashing the preference file for the menubar would solve this? Go to the preferences folder-- /Library/Preferences --and trash this file:
com.apple.systemuiserver.plist

OpenPS4.0 - Upload icon not active

Hi Gurus
I am using openPS4.0 Version 2.02 to integrate SAP R/3 with MS project. I am able to download projects from SAP R/3 to MS projects as download icon is active. However I am unable to upload projects from MSP as the upload icon is grayed out in MSP.
I have created and assigned the SAP_PS_EPS role to my user ID as proposed by SAP Note 534045, but still the upload icon is grayed out.
Kindly guide me in resolving the issue
Regards
Abhijit Sen

Ken,
I can confirm that Google Chrome is now allowing multiple uploads for both the normal upload and the drag and drop on my end. It was not this morning so this may be an intermittent problem that we may want to start cataloging and see if we can back track the issue. Right now it's a one time occurrance we'll have to track this over the next few days to see what happens.
Good info to know about IE 8/9. I recommend sticking this Gem of Knowledge in a FAQ so others will know this is a browser issue and NOT a cloud issue.
The speed of upload has improved from this morning but I do not have hard numbers to post just a general observation at this time. Let's face it upload is never going to be particularly "snappy" at DSL speeds but there may be a port 80 bottleneck we are running into during peak times at the data center. It is something to think about and keep track of at least. Would be interesting to see the load chart by the hour but that is something for the server farm gurus to undertake.
Pat on the back for a good job and good info. Keep up the good work!

How do I delete pages that keep coming up when I open with first letter? Stop Loading Page icon not activated - does not respond

How do I delete pages I don't want loaded anymore from coming up? The 'stop loading pages' icon does not respond

If you update to Firefox 3.5.x or 3.6.x then you have more options for the location bar behavior.
See [[Smart Location Bar]]
For Firefox 3.0.x See http://forums.mozillazine.org/viewtopic.php?f=38&t=685365 - Customising the Firefox 3 Location Bar
Old Location Bar: https://addons.mozilla.org/firefox/addon/7637

Idvd 'burn' icon not active - help!

I have created my first idvd project and finished it. I used photo's from iphoto and audio from itunes. I want to burn to dvd but the 'burn dvd' icon is dormant. I tried to insert a dvd-r to the disc drive but it just spits it out. My iMac has the idvd 3..... I would really appreciate any help/advice!!! please.
Suzanne

Thanks Patrick,
I followed your instructions and I didn't get past the terminal...
here is what happened - .. what am I doing wrong. thanks for your help.....
Last login: Tue Nov 8 08:02:04 on ttyp1
Welcome to Darwin!
[Suzanne-Bonds-Computer:~] suzannebond% drutil list
drutil: Command not found.
[Suzanne-Bonds-Computer:~] suzannebond% 'drutil list'
drutil list: Command not found.
[Suzanne-Bonds-Computer:~] suzannebond% "drutil list"
drutil list: Command not found.
[Suzanne-Bonds-Computer:~] suzannebond% drutil
drutil: Command not found.
[Suzanne-Bonds-Computer:~] suzannebond% dr util list
dr: Command not found.
[Suzanne-Bonds-Computer:~] suzannebond% removable drives
removable: Command not found.
[Suzanne-Bonds-Computer:~] suzannebond%

Icon not active in Y report

Dear All
I have currently developed a Y report on store consumption. In the report Total and sub total option is in deactivated mode. How to make it activate mode.
With Regards
Arun

If you have used ALV grid for displaying the customized report then ensure specific field of total and subtotal have the following code.
http://www.sapdev.co.uk/reporting/alv/alvgrid.htm
fieldcatalog-do_sum = 'X'.
fieldcatalog-subtot = 'X'.
Regards,
Tehsin

The WI-FI icon is not active (I had to restaure my ipod after a drop in water...) How can I activate the WI-FI logo again?

The WI-FI icon is not active (I had to restaure my ipod after a drop in water...) How can I activate the WI-FI logo again?

You can try here. However, I suspect a hardware problem. It usually is.
iOS: Wi-Fi or Bluetooth settings grayed out or dim

I can not instal some apps on my iPad. For example Dolphin browser. the icone of this app is not activated. Help Help help!

I can not instal some apps on my iPad. For example Dolphin browser. the icone of this app is not activated. Help Help help!

As Johnathan has written yes apps for iPhone will work in the iPad, however there is a '+' mark on the icon you touch or click for download which indicates both iPhone AND iPad apps. Those apps will display perfectly for the iPad.

I have iOS 5 and I have purchased iTunes match, but the iCloud icon in iPad settings is not activated what do I need to do to get it to operate

I have purchased iTunes match and iCloud icon appears in my ipad2 settings, but it is not activated. What do I need to do to get it to operate?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

I cloud icon is not active on my i pad, just grey, unable to access the icon...what should I do?

I have i cloud on my i phone and Ipad. But the icon on iPAD IS NOT ACTIVE, JUST GREY...

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

What does 'Bridge's parent application is not active" mean?

I just installed Adobe CS5 design premium and I am trying to open Camera RAW files in Bridge in Camera RAW, but it keeps giving me an error saying, "Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature." What does this mean? What am I supposed to do in order to use this feature of Bridge? Thanks for helping me.

This has been a problem for some. Try opening Bridge from Photoshop or another application, rather than from the Bridge icon.

I get "an error has occured" when trying to download from the AppStore. I can not re-download as the button is not active.

I encountered the response "an error has occured" when I downloaded Maverick X from the App Store. I can not try to re-download as the download button is not active. I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
Suggestions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

ABUMN icons not active

Similar Messages

Maybe you are looking for