AC Adapter for 802.11n Base Station.

Hi all,
Does anyone know where I can get a replacement AC adapter for a 802.11n Base Station?

Yes and they don't sell it separately.

Similar Messages

Manual Static LAN IP address for 802.11n Base Station when using PPPoE

We have a network of about 75 machines. We want to replace our main router with the new Airport Extreme 802.11n base station. WAN connection is PPPoE so we'd use the NAT function. All IP addresses of our machines on the LAN are statically assigned.
Problem is our machines are assigned to find the router at a specific address: 192.168.0.254. The default base station IP in that subnet is 192.168.0.1. Is there any way to change the IP of the base station to 192.168.0.254 from the default of 192.168.0.1? We can do it if we have it join our existing LAN in bridge mode, but we want it to provide the main NAT functions AND connect to our ISP's PPPoE server WITHOUT having to change all our LAN devices to find it at 192.168.0.1. Possible?

The HH will only show devices which use DHCP in the list of devices, unless you've set the device to use a static IP in the HH Home Network page. It's a bit of a silly idea and IMO the software on the router is terrible, but you do it like this...
- Set the printer to use DHCP to get an IP address.
- Log in to the HomeHub 5 and browse to the Home Network page (http://192.168.1.254/index.cgi?active_page=9130)
- Find the printer in the list of devices and click on it.
- Click on 'Yes' next to the "Always use this IP address" option.
- Set the IP address on the printer statically and update your devices to use the new IP address of the printer (if it changed from what it was before).
That will ensure that the DHCP server in the HH5 doesn't lease the same IP to another device. This will also allow you to see the printer in the list of devices.

Is my AirPort Extreme (802.11n) Base Station defective?

I'm trying to set up a wireless network with my new AirPort Extreme (802.11n) Base Station. I dismanteld my existing network that consisted of an old model AirPort Extreme and an AirPort Express. I can't seem to get anything to work properly with the new hardware. I have a G4 Quicksilver that uses an AirPort card. Is that the issue? I thought they were compatible. I was not able to update the Setup Utility because I don't have an Intel Mac. Still, that shouldn't prevent me from doing an initial setup. I'm thinking perhaps the unit is defective. I've been working on this several hours a day for almost a week. This is the most trouble (by far) that I've ever had with any Apple product. I'm really disappointed. I suspect the hardware is defective, but based on all of the issues I've read about in this forum, I think it could just be reflective of the poor overall quality of the new AirPort Extreme. What a let down.

What is the exact name of the application you are using to configure the airport?
You should be using "AirPort Utility"
It is a Universal application, so it should work on both a PPC and Intel mac.
As for the update, if you can't download it via software update, you most likely do not need it.
The quicksilver only has an Airport card:
http://support.apple.com/specs/powermac/PowerMac_G4_Quicksilver2002.html
That means that you will need to configure the airport extreme N to operate in the 2.4 GHz range. You will need to tell it that it needs to be compatible with 802.11b
There is probably an option for 802.11 b/g/n compatibility.
Are you going to still use your airport express? you could either use WDS to extend your wireless network without connecting the two airport base stations with an ethernet cable... or you could connect them together with an ethernet cable and configure the same network name and use two different channels (only use 1, 6, or 11). If you extend a network, they both need to use the same channel.
If the quicksilver is the only machine on your network, it will not be any faster.
Actually, you could make things faster, now that I think about it... I am guessing that your quicksilver is not located near your airport extreme. If I am wrong, just ignore this...
You could use one of your airports as your main base station, connected to your cable modem/dsl whatever... then you connect the other airports ethernet to your quicksilver. you then turn off the airport card in your quicksilver and set up the airport connected to your computer to use WDS and connect to the other airport using 802.11g.
You now have gone from an 11 mbps max (5 mbps real world) connection to a real world 30-40 mbps link.
Other options would be to look for 802.11g or 802.11n usb adapters for the quicksilver... I am not sure what is mac compatible out there, since it is probably a small market since it is built in to all new macs.
Good luck

Airport Extreme 802.11n Base Station blocking RealPlayer 11 completely

I am trying to play this radio station (just a brasillian sports channel) on RealPlayer 11:
rtsp://real.rbsonline.com.br/liverbs/*/broadcast/rdgaucha/gaucha.rm
Which is completely blocked on my Airport Extreme 802.11n Base Station with the latest firmware update.
It even blocks when RealPlayer is configured for HTTP only.
I am using it on my iMac which is connected directly via a ethernet cable instead of wifi to the Airport Extreme 802.11n Base Station.
RealPlayer can play it fine when I plug my iMac directly to the cable modem so it proves is the router. I never had RealPlayer issues before when I was using a linksys router.
It does really feel like Apple put an intentional block on RealPlayer to stop competition.
Anyone seen this issue? Guess it is related with the BBC RealPlayer issue.

Fixed myself, problem was because I setup OpenDNS on base station, removed it now works

No longer seeing 802.11n base station

Hi,
I have a two-week old 17" MBP. I just reinstalled OS X (10.4.8 w/ all the latest updates) and I can no longer see my Airport Extreme base station when it is in "n only" mode.
I have reinstalled the "AirPortExtremeUpdate2007001.dmg" update a few times to no avail.
What do I have to do to re-enable the 802.11n functionality of the Airport Extreme card in my MBP?
Thanks!

You might need to reinstall the N enabler which was on the CD that came with the base station. To see if you do go to
Applications --> Utilites --> Network Utility. Select the interface for the wireless and on the bottom it will say a/b/g/n. If it doesn't have the N on the end, then you need to reinstall.
If you already have the n there then you probably need to reset your base station

Can I Use 802.11n Base Station and 802.11n AirPort Express in an 802.11 ac Time Capsule Main Base Station WDS Network?

I havea "wirelessly challenged" 2-story home and need to extend the range. Currently I have an 802.11n Main Base Station with an 802.11n Airport Express Remote. It's not getting the job done (upstairs connection is weak).
I am considering getting an 802.11ac Airport Time Capsule to help, even though I currently only have devices with 802.11n wireless connectivity (future-proof a little).
I an planning on setting up a Wireless Distribution System (WDS) Network:
1.) Setting up the Time Capsule as the Main Base Station connected to a Cable modem
2.) Reconfiguring and Setting up the current AirPort Extreme 802.11n as a Relay Base Station
3.) Reconfiguring and Setting up the current AirPort Express 802.11n as a Remote Station
I cannot "hard wire" one Base Statio to the other.
Will this work?

Will this work?
Unfortunately, no. WDS is a older, very inefficient way to extend the wireless network signal.
As such, newer operating systems like Lion, Mountain Lion and Mavericks do not even offer settings for this older WDS type of network.
In addition, the new Time Capsule has no capabilities to use WDS settings at all, even if you used a Mac with another operating system to try to set things up.
Even if it were possible to set up a WDS network, the speed on the network would be incredibly slow. As you know, WDS only operates at "g" wireless speed levels. Each "relay" or "remote" that you add to the network each cuts that bandwidth or speed in half.
With a WDS "main", "relay" and "remote", the network would be operating at about 14 Mbps......a tiny fraction of what the devices would be capable of providing normally.

Extending a network with two AEBSn 802.11n base stations

Problem: Laptop on remote Airport Extreme (n) doesn't get internet, but can see entire network.
I have set up 2 new Airport Extreme's (n). One is connected to the cable modem and set to "create wireless network" and "Share a public IP address" . The other is about 80-100 feet away and set to extend the network.
A PowerBook G4 is connected to the remote Airport Extreme and gets an IP address correctly, and can connect to a computer on the primary Airport Extreme. Transfer rates from the remote laptop to a computer on the primary Airport Extreme are strong (15-30 Mbit).
According to the Airport utility, link speed between the two Airport Extreme's fluctuates between 104 and 130 Mbit.
The problem is that the computer connected to the remote Airport Extreme can't get out to the internet. Computers connected to the primary Airport Extreme get a very fast connection to the internet. What am I doing wrong?
Airport Extreme 802.11n Mac OS X (10.4.9) AEBSn

Let's double-check your AEBSn's settings...
AEBSn - Extending a wireless network Setup
- If practical, place the base stations in near
proximity to each other during the setup phase. Once
done, move them to their desired locations.
- Open AirPort Utility and select the base station
that will connect to the Internet.
- Choose Manual Setup from the Base Station menu, or
double-click the base station to open the
configuration in a separate window. Enter the base
station password if necessary.
- Click AirPort in the toolbar, and then click
Wireless.
- Choose “Create a wireless network” from the
Wireless Mode pop-up menu, and then select the “Allow
this network to be extended” checkbox.
- Next, select the base station that will extend this
network, and choose Manual Setup from the Base
Station menu, or double-click the base station to
open its configuration in a separate window. Enter
the base station password if necessary.
- Choose “Extend a wireless network” from the
Wireless Mode pop-up menu, and then choose the
network you want to extend from the Network Name
pop-up menu.
- Enter the base station network and base station
password is necessary.
- Click Update to update the base station with new
network settings.
(ref: Page 45 of "Designing AirPort
Extreme 802.11n Networks.
I followed the exact instructions above with one AEBSn connected to the DSL modem and "creating the wireless network", and a second AEBSn "extending the network". Depending on the location (1st or 3rd floor), my PowerBook G4 connects perfectly to the AEBSn with the stronger signal.

What to do with old 802.11g base station?

Hi. I've upgraded to the 802.11n base station and I was hoping to use my old one (the dome) to connect a remote printer, but Airport Utility doesn't recognise it.
Any suggestions welcome, thanks, pmarkoni

Hi Duane, thanks for your welcome and for your suggestions.
I've tried the hard reset, yes. I think maybe it wants to be the boss, or nothing. I also have a dead Airport Express, so maybe it's just me! It flashes amber forever, and it used to support a printer. I also have another AE which I use for AirTunes to my Logitech speakers, and that works fine, but that AE is right next to my Mac,so what's the point? If I connect the same plug to my Mac's speaker port nothing happens.
Any more help appreciated! Thanks again, pmarkoni.
Mac Pro Desktop Mac OS X (10.4.9)

HT4259 I have an 802.11n base and extender and still cannot get a good signal 80-90 ft away . Why?

I have an 802.11n base and extender and still cannot get a good signal 80-90 ft away . Why?

Hardwire is always recommended because there is virtually no signal loss in a wire....at least up to 300 feet or so.
Another advantage of using Ethernet cable...if you can...is that you can locate the AirPort Express where it is most needed.
If it extends using wireless only, it pretty much needs to be located about half the distance from the main router and the general area that needs more coverage.
I like to use WiFi Explorer since it displays SNR (Signal to Noise) readings, which are the best way to evaluate signal quality.
Mac App Store - WiFi Explorer
If the signal is varying constantly, something is causing it to do so....assuming that the AirPorts are functioning correctly.
Cordless phones are a huge problem for wireless networks. You want to try to figure out if the phones are causing a problem as a first troubleshooting step.
That is why I suggested that you turn off the phones for an hour or two and watch the network to see how it behaves. If the signal stops fluctuating....that is a good clue that the phones are interfering with the wireless signal.

Notice Re: New Airport Extreme 802.11n Base

About an hour ago, I got off the phone with Apple Support. They were very helpful in getting "phase one" of my installation going. But in the process WE both discovered that the new Airport Extreme Base Station (802.11n) I had bought from the Apple Store nearby contained: OLD versions of setup software and pdf manuals!
I could not proceed to the final step (as we intended while on the phone) because I had just installed "v. 4.2" of the software and of course version 5 is needed.
Checking the pdf manuals - I could plainly see the OLD "flying saucer" model base was being depicted and the instructions were for that model. It was "funny" because the Apple Support person asked a couple of times, "Is the base you have a square about 1-inch thick?"
Of course, Support will send out word that there are some (who knows how many at this point) Airport Extreme Base Stations in stores (even Apple Stores) with obsolete software and documentation.
I just thought I'd post this for those who have not yet bought an AE Base Station - be sure to check this before buying.
My consequence are less happy: It's now Friday Aug. 31: It will take 5 business days for the replacement disk to arrive, next Monday is a US Holiday, which means I won't be able to complete my setup until week after next.

Thanks Rajesh, I may do that but it seems a shame now that the Apple Support lady is sending me a copy. I think instead, I may call the local store and ask if they know of the problem, first.
Because this Apple Store opened only about 5 weeks ago, I suspect this may be "new stock" which indicates that's all they'll have. Also, Apple Support said they'd notify the right parties - by which I think they mean their own and independent Apple retailers.
Anyway, I wasn't posting the info as a question: I wanted to notifiy those who may be about to buy Airport Extreme for themselves. I did some checking before posting here and found no other notices of this problem. So I guess I've got a "scoop" and wanted to be first in spreading the news.
I left out a good part of the whole story in my orignal post: what got me to Apple Support was that just connecting the base station (with ethernet cable) to computer knocked out my DSL service. I first called my ISP tech support and got that fixed. But such an easy procedure "backfiring" like that got me thinking, so I then went to Apple Support via phone. Only then did we discover I had the old version of the software. My "phase two" is just getting an eMac in the next room connected wirelessly - no big deal - so I may wait for that complimentary disk after all.
One possibly related item: After I finished talking to Apple Support, almost at once, Mail.app went down. It turned out - the mail .plist had gotten corrupted. I trashed that and Mail came back -but then I had trouble connecting to the mail server and had to re-do password and so-on. Right now, I'm "back to normal" but suspect that installing the old Airport software (a second time) is what kicked Mail to it's knees. Sure was a heckuva coincidence if it wasn't that, I've never - never had trouble with any version of Mail.app until now.
Message was edited by: macnoel

Airport Extreme 802.11g base station loses internet connection often

I just installed an Airport Extreme base station (802.11g version Apple Base Station V5.7) last week. And it keeps dropping my internet connection at least once a day.
I simply replaced an old SMC Barricade wireless router that died (and was a POS). But I only had to reset the SMC about once every 2 months. Nothing else has changed in my setup. Only the router/base station is different.
The wireless part is fine. Even when the internet connection gets dropped the hard wired AND wireless clients can still access the local network. Reseting the DSL modem has no effect. The only solution is to power cycle (unplug and plug back in) the AEBS OR restart it from Airport Admin utility.
But you can't do that from offsite. When the AEBS drops the internet connection I can't access my office network from home!
Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?
Any ideas on resolving this?
Thanks

"Any ideas on resolving this?"
Looter,
Based on your description, open AirPort Admin Utility and check the configuration of your main base station on the "Internet" pane. If you're using ethernet cable from the modem to the base station, the top selector [Connect Using:] should show "Ethernet" and the second selector [Configure:] should show "Using DHCP"
Also, check your iMac's System Preferences>Network at "Show: AirPort" and check the PPPoE pane which should show no entries (unless your isp requires its use), and the TCP/IP pane which should show "Configure IPv4:" as being "Using DHCP" - while all other info is filled in automatically.
"Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?"
No, the AirPort Admin Utility is not web-based, only located on your computer with the information available to it necessary to operate the AirPort system. It does not actually administer the signal. I think that is done only by System Preferences>Network.
"I'm actually referring to the Airport Express base station not my MacBook Pro's wireless connection. Is there anywhere in the Airport Admin Utility software that tells you the status of the AEBS' internet connection NOT the wireless connection."
No, that info is not available in that utility. The information you seek is at System Preferences>Network, but only after the system scans for it. Click the "Assist me..." button and then, on the "Do you need assistance setting up a new network connection or solving a network problem?" panel that opens, click the "Diagnostics..." button. A "Network Diagnostics" panel will then open and if its scan shows there is no internet the lights to the left of "Internet" and "Server" will be yellow instead of green. Meanwhile, it continues scanning for the connection until it is re-established. I determined this by pulling my cable from the phone jack, later reinserting it.
Further information that may be helpful to you can undoubtedly be found in threads such as this other one:
http://discussions.apple.com/thread.jspa?threadID=884049&tstart=0
edit-
In re-reading, I may not have given you what you need. It sounds as if you may be "timing out" somehow on your connection. You might want to check around at some of your log-on settings to see if there is that possibility connected to one of them, even though the only thing I can think of is the "Renew DHCP Lease" button which is unknown to me, as I've never used it.
Message was edited by: myhighway

Trying to Connect 10.7.5 to 802.11N Airport station to print

Hi I have been trying to connect my printer and my computer via my AirPort Utility Station 802.11N, the airport station has the Orange light on solid and is connected to my laser printer via ethernet cable (I have also tried connecting with USB). I have tried pressing reset on the AirPort Station but it has made no difference.
The error I am getting on the computer in AirPort Utility (Version 6.3) is 'No configured Airport base stations have been found. AirPort Utility will continue searching'.
Does anyone know how I can configure this as the 'Base Station' Settings in AirPort Utility are all greyed out I can not reset from the computer.
Any help would be greatly appreciated.
thank you

Not quite sure how your question is related to any Adobe software.

IMAC G5 ethernet port for 802.11n

Does anyone know if you could get the 1GB ethernet port to work with a new 802.11n Airport Extreme unit ? 540MBS sounds pretty interesting.

You have posted a question about your G5 Mac in the G4 iMac forum, so it might be getting overlooked.
You can wire your iMac into the newe AEBS, but the Draft N networking that you are talking about is not available for your Mac. The only Macs that have support for the Draft N standard are the currently shipping Intel units. Even my first gen BlackBook will not support Draft N.
The ethernet ports on the new AEBS are not gigabit ports either, so while your iMac can connect it will be limited to the 100mbps of standard fast ethernet.
Unless Apple comes out with an adapter for us, we will be left out.

802.11n Base using USB Raid Volumes?

Hi All,
Got the new Airport base station, pulled out the old one, factory defaulted my three other Airport Express base stations, and then joined them as WDS extenders. All is good. Won't be testing throughput yet all I am still all PPC.
Bought the new base station for the USB disk sharing as I have computers all over the home and this was going to be great to facilitate sharing!
Before it arrived, I purchased a new USB eBOX-U Eight (8) drive enclosure from Firewire Depot (as reviewed by AMUG).
Very nice box for $265. Loaded six new 400GB (newegg.com @ $105/ea.) and a couple of old misc. drives. Formated top two as raid 0, next two as raid 0 and then mirrored the two together (I just went through the worst hard disk crash I've ever had with a stripped 0 volume, I never want to go through this again - 100% data loss).
Anyways, last 2 400GB drives as mirrored raid.
Fire the puppy up and for an overnight backup device, it's perfect. I couldn't use it for encoding video but for going to bed and letting my computer backup cheaply and safely, I am delighted!
So now I'm ready for the new Airport base station, I can share these massive, safe drives over the wireless network and get all of my computers backed-up.
Nope.
The base station refuses to recognize the Macintosh-formated arrays, it only sees one drive and that unusable.
Any ideas? I can't find any prohibitions to such a configuration.
JP
G5 Quad Mac OS X (10.4.8)

Why doesn't the new base station support Mac software RAID volumes? I can't believe there aren't more people up in arms over this missing functionality. A Mac product not supporting a Mac software configuration? Seems downright silly.

How do I tell what the password is for my airport base station

My computor and wireless ( airport extreme ) were isnstalled several years ago, how do I retrieve my password for the network?

Go to this link:
http://
http://www.askdavetaylor.com/recover_wifi_password_mac_os_x_107_lion.html
You are assuming that the user has a Mac. Even if he does, this is much more complicated than simply resetting and entering new passwords.
You also have to know the main administrator password for the Mac
If the user does not know his base station and wireless passwords, he probably doesn't know his admin password either

AC Adapter for 802.11n Base Station.

Similar Messages

Maybe you are looking for