AC Adapter question?HELP!

I im ganna buy a adapter on ebay heres the link do Ihave to buy a firewire cable or can i use my usb cable???
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5820469180

Rigo.
-You don't have to use an ac adapter
-You can buy a USB ac adapter from Apple (Probably ebay aswell if you prefer)
-You don't have to use firewire
Get your facts straight before posting and don't post offensive material. It is against the Apple Discussions Terms of Use
<hr>Sam

Similar Messages

HT1981 I will use my 110V MacBook in the Philippines which has 220V sockets. Will the World Travel Adapter Kit help me?

I will use my 110V MacBook in the Philippines which has 220V sockets. Will the World Travel Adapter Kit help me?

Assuming you're in North America now, you probably won't need any sort of plug adaptor there; most sockets in the Philippines are the same as those in North America. In case you do, it doesn't contain the correct adaptor.
Voltage conversion is handled by the MacBook without any additional components.
(66079)

Apple id is disabled, to reset the password I do not know the email and security question. help what to do?

apple id is disabled, to reset the password I do not know the email and security question. help what to do?

Hi ingaosk,
Thanks for the question. Based on what you stated, it seems like you did not receive the reset email. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you didn't receive your Apple ID verification or reset email - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

HT1349 I for get security question help my too rest , send to my mail :

I send email for serves and send to my by email ling I tray eat not help my to rest my security question .
No we to send security question to my email or what I down I tray from many days
The serves send that and it,s not help : read it
Hello,
The following information for your Apple ID *********** was updated on 02/03/2013:
Phone number(s)
If these changes were made in error, or if you believe an unauthorized person accessed your account, please reset your account password immediately by going to iforgot.apple.com.
To review and update your security settings, sign in to appleid.apple.com.
This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
Thanks,
Apple Customer Support
Tel my what I do I need my program and my many in my account and wan I need to seal program he asking security question , what I do
I for get security question help my too rest , send to my mail : ***********
<E-mail Edited by Host>

Do not post your email adress here.
Open your browser and go to iforgot.apple.com and follow the instructions there.

HT201363 I forget security question, help me recover?

I forget security question, help me recover?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104340)

About Java 2 opaque font color question, help needed!

About Java 2 opaque font color question, help needed!
I was trying to test opaque font (the string has a foreground color and a background color), but i can't find the method for doing that.
i can change foreground by Graphics2D.setPaint(Color.black).
Anybody know how to change the background of the string?
Thanks!

Hi. The way I'd do it would be to use the font metrics to find the length of a string and draw a rectangle and then drawstring over the rectangle. If you want an example, I can post it although I suspect theres a better way.

I forgot my security queStions help me!

I forgot my security queStions help me!

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
You should get an email reply within, I think, about 24 to 48 hours (and check your Spam folder as well as your Inbox)

Sister was using my iPod, she changed Apple id to hers, then forgot the iTunes password, now it's disabled she doesn't know what backup email she use or the security questions HELP can Apple reset my iPod?

sister was using my iPod, she changed Apple id to hers, then forgot the iTunes password, now it's disabled she doesn't know what backup email she use or the security questions HELP can Apple reset my iPod?

Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

HT5312 forgot the answers to security questions. help.

forgot the answers to security questions. help.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

X-fi xtreme gamer Digital I/O Adapter question, please help!

< I have this card:
http://www.newegg.com/Product/Produc...=N82E682902006
I've been trying to find some kind of adapter for it so I can get my Optical connection to work with my card since my speakers and headphones can use this. Also its a pain unplugging my analog connection from speakers and heaphones everytime I want to use one or the other so if I can get optical working then it would be a very easy switch from my receiver to my headphones without getting behind my computer everytime.
Ok so it says that this product won't work on any other cards, it says
Sound Blaster X-Fi XtremeGamer Fatalty Professional Series?<span class="Apple-style-span">is supported but it fails to mention x-fi extreme gamer (my card) in the listings, however I assume that it would work since they are similar cards?
http://us.creative.com/products/prod...=6&product=780?
<span class="Apple-style-span">?Can i get an offical response if this product will work with my card? If this doesn't work then this is extremely dissapointing since I have the option to use optical and will have to buy a new card....
<span class="Apple-style-span">Thanks for any info!

Hi Ravenfrost,
I am not aware of an adapter that may work in this case because you can only use the flexi-jack for any of the following functions at any one time.
<div class="pSmartList" style="text-align: left; text-transform: none; font-variant: normal; font-style: normal; margin-top: 0pt; margin-bottom: 0pt; color: #000000; font-size: 9pt; font-weight: normal; margin-right: 0pt; text-decoration: none"><ul class="pSmartList" style="text-align: left; text-transform: none; font-variant: normal; font-style: normal; margin-top: 0pt; margin-bottom: 0pt; color: #000000; font-size: 9pt; font-weight: normal; margin-right: 0pt; text-decoration: none"><a name="wp2765" target="_blank" title="wp2765">[/url]<div class="pSmartList" style="text-align: left; text-transform: none; font-variant: normal; font-style: normal; margin-top: 0pt; margin-bottom: 0pt; color: #000000; font-size: 9pt; font-weight: normal; margin-right: 0pt; text-decoration: none">[*]analog devices like cassette players and other line-level sources<<a name="wp2766" target="_blank" title="wp2766"][/url]<div class="pSmartList" style="text-align: left; text-transform: none; font-variant: normal; font-style: normal; margin-top: 0pt; margin-bottom: 0pt; color: #000000; font-size: 9pt; font-weight: normal; margin-right: 0pt; text-decoration: none">[*]a microphone<<a name="wp2768" target="_blank" title="wp2768">[/url]<div class="pSmartList" style="text-align: left; text-transform: none; font-variant: normal; font-style: normal; margin-top: 0pt; margin-bottom: 0pt; color: #000000; font-size: 9pt; font-weight: normal; margin-right: 0pt; text-decoration: none">[*]external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream* from the Optical output<[/list]Message Edited by KokChoy-CL on <span class='local-date'> 02-02-2009<span class='local-time'> 04:2 [email protected]

External preview display via. Mini-DVI to video adapter QUESTION

Hello, I have been browsing this forum for a while, and this is my first question.
I have a Macbook Core2duo running Final Cut Pro. I purchased a Mini-DVI to S-video/composite video adapter.
I cannot get my work to preview on this external monitor. I would like to view the canvas on the monitor while working. I had this setup at school on a G5, but I cannot get it to work on my macbook. The only way apple suggests doing this is by setting up a camera via. firewire and then run from the camera to the NTSC video display (television). I would just like to do it via. mini-dvi to my television for previewing.
Any help is greatly appreciated. Thank you,
Morgan Bressler

From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
-Brian

DVI to ADC Adapter question

I've got a Quicksilver 933 (2002) and want to get the ATI Radeon 9600 Pro PC & Mac Video Card. I have a 17" Apple Cinema Display and want to add the new 20" Apple Display for an extended desktop. The ATI card has 2 DVI outs. I will need a DVI to ADC adapter. My question is, the adapters (see below) say they are good for connecting to DVI-D out and the 9600 card is DVI-I. Does this make a difference? Does anyone out there have experience running a set-up like this? I would hate to spend $200. on this card and $80. on the adapter only to find out I couldn't use the 17" Display.
My other choice is the 64MB ATI 9000 Pro Mac edition. (This has both a DVI out and an ADC out so I would save ~$200.) I will not be doing any gameing, just extended desktop work with Photoshop, Flash and Dreamweaver. Would there be any noticeable difference between the 9000 and 9600 in these activities? As always, thanks for your input.
AddLogix DVI - ADC Video Adapter
Addlogix's DVI-D to ADC adapter allows Apple ADC LCD monitors to be connected to virtually any DVI computer systems and retain the USB hub feature as well. The adapter combines the DVI and the USB signals from your computer and provides DC Power to the Apple Display.
http://eshop.macsales.com/item/AddLogix/MCADVIADC/
Dr. Bott's
DVIator, DVI to ADC adapter
http://www.drbott.com/prod/db.lasso?code=0111-DVAD

Hi Justin,
Can I further the questioning instead of starting my
own new thread?
No, worries, Mate!
I am in a similar situation.
I have a 2003 Quicksilver 933 with dual display
currently running.
(Using a 17" Apple Display & a 17" Sony CRT).
I eventually wish to either upgrade to a 20+ cinema
display and use the 17" Apple display as my extended
desktop, but that may still be down the road a bit.
Until then, Im looking to ditch the CRT for a 15 (or
so) LCD to dave on desktop space and make an attempt
to match the 17'' Apple Display.
Ok, on to the question.
I purchased a ATI Raedon 9800Pro Mac Edition and then
noticed it only have two DVI connections. This won't
be a problem for the eventual LCD upgrade (which has
DVI connection), but I need to purchase a DVI to ADC
convertor for the 17" Apple display.
The Radeon 9800 has DVI and VGA and S-Video output, I believe. If you want to run 2 LCD monitors, one of them will have to have a VGA input (which you can't get on Apple monitors).
1) Can I expect any loss in quality/performace due to
the conversion between DVI and ADC?
No, if the adaptor funcftions properly, there is no loss from DVI to ADC.
2) I believe there are mulitple brands out there
doing this conversion. (Apple, Geffen, etc..) Any
brand looking to be more preferred over the other?
The Geffen adaptor is presently the only one which will support the 17" ADC CRT studio monitor (as well as the ADC LCD monitors).
3) With the convertor will I still be able to power
my mac on and off with the use of the display power
button?
You can power the Mac on, however, some adaptors don't allow you to power it off.
Thanks for any help.
Justin
Cheers!
Karl

Mail adapter question

I have a question regarding the mail adapter scenario. Firstly data goes to ECC and some validations are performed and if there are any errors, ECC will provide me with some indicator saying this record has errors.
Now, the same structures are used in the opposite direction and I have to count the number of error records based of that and send that info as an email. If I created a UDF to count the number of error records, how do I put that information in the email ?
Is there anyway, I can capture that info in the mail adapter ?
Any useful links will be appreciated.
-V

being from a Java background is that every method/function declaration is supposed to have the return type and I was told that behind the scenes Java is being run which is why I assumed that thats a return type.Again, I am fairly new and I am in the process of learning things.
For simple UDF (cache = Value), returns string.
For advanced UDF (Cache = Context or Queue), returns array of strings.
The problem is I did not understand the use of ResultList class in this case.
Refer this -
http://help.sap.com/saphelp_nw04/helpdata/en/7d/028c4057d5701de10000000a1550b0/frameset.htm
use queue execution types but I am a little bit confused as to the usage of that.
Because of u201Cqueueu201D function, the arguments that we define automatically become arrays, because PI is assuming that we want to operate on multiple input values with this function. That's the reason you are able to traverse through each and every value of the field "ecode".
Any useful example would be appreciated.
Refer this:-
http://wiki.sdn.sap.com/wiki/display/XI/JAVAFunctionsin+XI
http://help.sap.com/saphelp_nw04/helpdata/en/40/7b8e40496f6f1de10000000a1550b0/content.htm
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=79955426
I am fairly new and I am in the process of learning things.
No short-cuts study and hands-on.

JDBC adapter questions

Hello all,
I have been playing around with the JDBC adapter on my XI sandbox to figure it out. I read through a few guides and I almost have a good handle on it, but there is still a big question lingering. I have configured an example scenario in which I would like to pull data out of the USR01 table from the XI database and transform some user data and place it back in the same table. I was able to get my connections correct and have the communication channel successfully execute SQL statements to alter the data. For example, my <b>Query SQL Statement</b> in the sender communication channel is as follows:
SELECT * FROM USR01 WHERE BNAME='ZTEST2'
And the <b>Update SQL Statement</b> in the sender communication channel is:
UPDATE USR01 SET BNAME='ZTEST' WHERE BNAME='ZTEST2'
This works fine and when I go to transaction se16 and pull up that table I see that the username gets modified when the interface is activated. However, I haven't really figured out exactly how to configure the communication channel / data types so that I can run a SQL statement that will populate my data type that I created for mapping. In other words, lets say I created a data type that looks as follows:
mt_sender
    row
         MANDT
         BNAME
         STCOD
And I want to populate that data type with data from the USR01 table (in the corresponding fields), what would my SQL statement look like in the sender communication channel? I read a few weblogs on how to do scenarios like this, so I built my receiving Data Type to look like this:
mt_receiver
     STATEMENT
          ROW
               action
               TABLE
               access
                    MANDT
                    BNAME
                    STCOD
But I still don't understand how exactly XI correlates the data types / mapping and transformations to the SQL statements....
I'm having a hard time putting this into words, but basically I'm asking a rather high level question I think. How does XI relate the data types to the data it pulls from the SQL statements? How do I actually get the SQL statement to populate my data types so I can do mapping and then repopulate the database table again? Does this make sense?

Hi Harrison,
      Also check out these JDBC structure links related to your question:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm</a>
Regards,
Subhasha Ranjan

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

AC Adapter question?HELP!

Similar Messages

Maybe you are looking for