AC adaptor or battery problem?? HELP PLEASE!

When I plug in my computer, the little side light is on, indicating that power is going into the computer. However, it is not charging the battery or giving my computer enough power to come on. My battery still had enough power to work without the adaptor but the computer is now dead. Is this a battery problem or an AC problem?

If ya bought it new, Id take it to the apple store and have them give ya a new battery.

Similar Messages

I kept my iphone on my table so with a half charged battery. I picked it up and it would not turn on then i charged it about an hour but still is not turning on.is it a battery problem? please help!

i kept my iphone on my table so with a half charged battery. I picked it up and it would not turn on then i charged it about an hour but still is not turning on.is it a battery problem? please help!

Press and hold both the home and power button until the apple symbol shows up, about 15 seconds.

My iPhone 5 is charging but wont turn on even with the hard reset and restore. Keeps showing low battery. HELP PLEASE

My iPhone 5 shows it's charging but wont turn on even with the hard reset and restore. Just keeps showing low battery. HELP PLEASE
I usually sleep with my phone on charge through the night and I haven't had any problem since, I left my iphone 5 charging last night and in the morning it stated 100% charged so I decided to turn the power off normally (Hold the hold button till it says slide to turn power off) I turned it off and suddenly my iphone went straight to low battery. Although I have been having weird battery percentage changes for example it would stay on 1 % for an hour or so or drain really quickly.
I have restored it as i thought was the thing to do all it's doing it restoring and still stating low battery and I have charged it for hours +. I can't hard reset it nor restore it NEED HELP PLEASE.
Most Apprieciated.

Hello, skittles_5ive.
Thank you for visiting Apple Support Communities.
You may find this article helpful in troubleshooting your issue. If all troubleshooting steps have been processed please see step 6.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Regards,
Jason H.

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

V570 battery problems HELP !!

Hi as I said I have a v570 ive had it about a year ,and today its saying that I need to replace the battery and that theres a problem with the battery Exact warning is There is a problem with your battery so your computer may shut down suddenly .Im really worried ,right now its my dedicated computer and I have a ton of work to get done on it so im really dependent on it .What I wanted to know is
1If I can just keep using it pluged into the adapter even if the battery has problems ,I think thats called ac power ?
2 if this could be an error message (and if I can do anything about that).I more than likely cant get a battery for it ,so im kinda screwed here .And I dont think I can afford another computer right also this has like a lot of stuff on it so thats not an option .help ? please

vbr wrote:
Wait take it out along with the adapter and then hold the power button again ,with it out ? can I ask why ,just for curiousity ,as it doesnt have either battery or charger wouldnt it be technically without any power ? Or does it have residual power or something .Again thank you
It needs to be done without adapter and without battery. This process releases any residual charge from system. This helps in most hardware cases.
The settings in Energy Management do not lead to the issue that you are facing. Also battery gauge rest\et does a full discharge and charge of battery. It helps in activating all cells of battery and increase backup. In your case, I would suggest not to try it. It may cause more damage.
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an Accepted Solution

My I-Pod has a problem Help Please!

Hey,
My i-pod is having some strange problems. First off, it is not turning on when it isn't plugged into a power source. I'm not sure if that is because it is the battery being low or what. Second and most important. My i-pod seems to be deleting songs off itself. The songs are still on my I-tunes on my computer, but they are being deleted off the I-pod itself. Then when I try to re upload the songs to my Computer, it says that I don't have enough write access. Please help!
Thanks.

Try to reset your iPod
Press and hold the MENU and CENTER buttons - at the same time - until the Apple logo appears. This should take about 6 seconds. Also, you want to do this while your iPod is connected to your computer.

SoundBlaster Zx major problems help please!

I tryd 3 Soundblaster Zx,s so far and i still dont understand why i have this problem, my mainbord is a MSI Big Bang Xpower 2 my previous soundblaster was a X-Fi Fitality Titanium Pro so if seen the reviews of the Zx on the net i was really exited about it, but now comes the weird part my mainbord wont detect any of these cards! i tryd 3 so far and al 3 had the same problem its not detecting the card the first one was acually detcting it for 2 days after that one morning i booted the pc and there was the speaker with the red cross true it no soundcard detected, the second one did not regonize the card @ all, and the third one was the same thing i tryed updating to the latest bios i tryd resetting cmos i tryd really everything i could think of, i realy need help with this so someone from creative please look further into this because this is a combination thats not working well i think
My X-fi is working perfect no matter what.
In other systems the Zx is working fine the problem i have is similar to this http://www.overclock.net/t/1350082/m...series-problem
Hopefully i get some ansers soon because this is just unacepteble.

i tryed updating to the latest bios i tryd resetting cmos i tryd really everything i could think of,
FWIW might want to check here: http://www.msi.com/service/forum/
MSI boards, Intel at least, seem to hold onto data, can be a bit of a PITA to clear the bios & update. Folks in the forum recommend not just using the reset button if you have one, or using the reset jumper, but pulling the battery for a while -- if the date's reset you know it was cleared -- if not than you only got at best a partial clear or reset. For updating the bios they recommend a tool & procedure you'll find in the forum, & they have a separate section with beta bios that might also help.
Also, I'm not familiar with your m/board, but you might want to double check the manual etc... My board for example has 2 pci-e slots [beside the 3 for graphics cards], but only one can be used at any one time.

Ipod touch 2nd generation goes from apple logo to low battery symbol when trying to turn it on. Won't show up in itunes either. Is it a dead battery? Help please.

Hi, I have a 2nd Geration iPod touch. The ipod will NOT go past the apple logo when turning on. After about three minutes of waiting the screen will go blank. So, I push the sleep/wake button and the low battery symbol appears, indicating that the ipod is being charged. After about three minutes the ipod goes to sleep. Wake up and the red battery shows up again but this time the apple logo appears after about three minutes and stays on for 5 minutes before going to sleep again. When you wake it up it is on the red battery again. and the process repeats. The battery symbol never increases from the low mark.(no matter how long I charge it.) It also gets a little bit hot after a while. The ipod will NOT show up in iTunes either. Please help thank you.

Try here:
iOS: Not responding or does not turn on
iPod touch: Hardware troubleshooting
If not successfl then an appointment at the Genius Bar of an Apple store is in order. Maybe a battery.

Shockwave Player 11 - Problem HELP PLEASE!!

I have upgraded to Shockwave Player 11 but I am having big
problems. I have installed it but when going on a Shockwave
supported sites ie; iSketch, it comes up in a white-box with a
message ''Adobe Shockwave Player is now installing.'' ''Installing
compatibility components.'' with a white bar below which is
supposed to fill up but doesnt. Screenshot on Link below. I have
been trying it both on IE7 & Firefox, tried both semi and full
installer but no luck. Please help?
http://i7.photobucket.com/albums/y295/ldndude/others/ShockwaveFlash11Problem.jpg

quote:
This worked for me. It will actually let me access the game,
but it is unplayable. The drawings are all just random lines. When
I draw people see this problem, it looks like I am just drawing
random lines on the canvas.
I'm glad 4 helping u.4 me all the games r playable.But the
new ones like....
http://www.miniclip.com/games/power-boat/en/
or
http://www.miniclip.com/games/rally-championship/en/
r very slow.

How do I solve the following Itunes error -42404 I have tried uninstalling as well as repair and re installing, I keep getting the same problem, Help please

Please help I am un able to get my I Tunes back on my Windows 7 -64 after a Virus clean out, How can I solve a problem with the followin ITunes error of -42404 I have tried the usual uninstall and reinstal, as well as the repair all at no success, do any of you have any solution Ideas that have solved this in the past? Please Help, Thank you...

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

AC adaptor or battery problem?? HELP PLEASE!

Similar Messages

Maybe you are looking for