AC Wall Charger not working

Hi, This seemed to be the most appropriate place to post this...
My AC wall charger has just stopped working all of a sudden. The ipod doesn't respond at all when connected to it (it was working fine for the last 7 months). Firstly, it is a firewire one, and i've checked the firewire cable by connecting it to the PC and it works fine. I've tried other wall sockets and it still doesn't work. I've also tried another ipod and still nothing.
I got it included with the ipod mini from the refurbished ipods page last december.
*Any suggestions on fixing it?*
Also, do they have warrantys? I've noticed that it has a serial number on it but its not recognised on the page you use to report problems with the actual ipod.
Any help is appreciated,
Jads

I doubt it has a warranty anymore. As to being repairable, it might be, but that is one of those things where if you are asking if it is repairable, you probably don't know enough about electronics to do the repair if you can repair it. I.e. do you have a multimeter to get in there and measure voltages to find the dead component?
Patrick

Similar Messages

  • IPad 2 Wall Charger not working at my home only

    This is a strange one.  I'm hoping someone has seen this and has a solution.  My iPad 2 will suddenly not charge when using the included wall charger but only at my home.  I took everything into Apple and the tech found everything in working order at the store (adapter and USB cable as well as the iPad itself).  He suggested I try different wall outlets at home (which I had). 
    On my way home I tried what I thought was a long shot and plugged the wall adapter into a adapter I have that allows you to plug a 110 volt device into your cigarette lighter.  This worked and I was able to charge the iPad 2 on the way home.
    I have tried a dozen outlets at home now and none of them work.  I read some posts about cold booting the iPad and tried that with no effect.  I also read posts about changing the order of plugging in the cables.  This hasn't changed my situitation.
    This iPad 2 is only six weeks old.  I was ready to try purchasing a new wall adapter until it charged fine at the Apple store and in my car.
    Any help would be greatly appreciated.  I don't want to have to drain my car battery or waste gas just to charge my iPad.

    Update:  Apple support hadn't heard of anyone having this problem so I tried something else on my own.  I let the iPad2's battery run completely empty and then plugged tried charging it normally (using my home electrical outlet).  It worked!  My iPad2 is back to charging and working normally.  I'm still concerned that there is something wrong with the unit but I'll have to keep monitoring it.

  • IPhone 5c wall charger not working?

    I got the iPhone 5c yesterday and the wall charger is not working. The USB cable itself DOES work because I was able to sync/back it up with my computer and when I plugged it in with the iPad wall charger, the USB cable worked to charge my phone. I mean this piece is brand new out of the box. Not sure if anyone else has had this issue and if it's worth it to take the time to go back to Verizon to complain..?

    Sorry that this happened to you right out if the box. You can try to take it back to verizon I would say that all apple products are covered for one year. Because your iPhone 5C is under that warranty you can go to any Apple store and they will swap it out for free for a new one. Just let them know what's appended and they will do it willingly. Hope this helps

  • Why is my wall charger not chargering?

    My Iphone4s is NOT charging when I plug into Wall Charger. I have tried different outlets. I also have 2 other USB wires and tried them. It will charge with my computer which doesn't help when I am on the go.Got a replacement wall charger not working. So my carrier replaced my phone and still not working

    Clean the dock connector with a soft, dry brush.

  • I need an original wall charger that works as mens belt. I do not want to have my charger in my hands, neck or pockets when I leave home. make it please, I have an Iphone 4

    I need an original wall charger that works as mens belt. I do not want to have my charger in my hands, neck or pockets when I leave home. make it please, I have an Iphone 4

    You can send Apple feedback at http://www.apple.com/feedback, as there is no Apple representation on the forums.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • The optical drive red light stays on, no sound in OS X, the car charger not working

    The optical drive red light stays on, no sound in OS X, the car charger not working, I think that its all tied to 1 error or 1 issue, maybe something to do with the boot camp file?
    Any ideas ?

    Hi S,
    There is a switch inside the audio jack that may be stuck. Try gently inserting, wiggling, removing the audio plug.

  • Macbook 6,1 charger not working

    Macbook 6,1 charger not working A1344
    The Macbook is a 6,1 purchased in 2010.
    My friend has had a go at the shooting suggestions but nothing seems out of sorts beyond it not working properly.
    No damage or signs of misuse.
    Ordinarily I wouldn't have thought a warranty would still apply but this paragraph on Apple support page made me wonder.
    --- Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of the evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.---
    When my friend took the Macbook and charger into an Apple Store in central London she was told it's out of warranty and best option is to just buy a new one.
    Any thoughts regarding whether Apple has approved free replacement for these chargers?
    She is in UK but machine was purchased in Australia
    http://support.apple.com/kb/TS1713
    thanks
    Jason

    all sorted now - new charger given
    turns out a bit of intelligent discussion yielded results
    so .. if you have any problem with an older mac take it into an Apple Store
    theres an excellent chance they will fix and replace even when the machine is out of warranty

  • Charger not working after upgrade iPad air to ios8

    My iPad air charger not working after install ios8, can anyone help please, thanks

    Hey andon,
    The “voice-to-text” feature you are referencing uses Siri to translate your voice into text, so you will want to use the following article to help you troubleshoot this issue:
    iOS: Troubleshooting Siri
    http://support.apple.com/kb/TS4079
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

    genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

    Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
    Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

  • Mains Charger not working

    When I plug my mains charger into my blackberry curve, it recognises the charger is plugged in, as the charge symbol appear, and then after about 10 seconds it dissapears and stops charging. This is only an issue with the mains charger as it charges fine on the car charger. have tried other mains charger so know it is not a fault with charger itself. Can anyone help at all?
    cheers
    x

    If it charges fine with the car charger we can assume that the charging port is ok.  If your main charger works intermittently but other wall chargers work fine, I would assume that your wall charger is faulty and nees to be replace.
    Message Edited by jrdante on 10-19-2008 12:46 PM
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • Powerbook g4 charger not working, changed fuse and still no luck

    I've got a powerbook g4 laptop. A few nights ago the charger just stopped working. The wire is totally intact and we have tried changing the fuse within the plug but it keeps fusing out and still not working. I really don't want to buy a new charger as I've bought at least 6 over the last 5 years (through the wire fraying) AND replaced the battery once already. Is there anything I can do to fix it?
    Thanks!

    You must be remarkably hard on your adapter cords. I packed my Powerbook and adapter up and unpacked them again at least daily for six years and my original adapter is still working fine.
    If the port to which the adapter cord connects in your Powerbook is at all loose or wobbly, your DC-in card is shot, and that may explain why your fuse keeps blowing. If you're in the habit of tripping over your adapter cord, that would explain both the long sequence of ruined adapters and a broken DC-in port/card in the computer.
    Unless you plan to treat your adapter more gently in the future, buying an inexpensive third-party adapter instead of an Apple unit would be a good idea.
    http://eshop.macsales.com/item/Other%20World%20Computing/ACADPTG4/
    Message was edited by: eww

  • HP G60-458DX AC Charger not working

    So today, my AC charger stopped working, which wouldnt be too much of a problem except my battery life is abysmal and I have 2 papers and a presentation due this week.
    Does anyone know the steps to get a new one ASAP?\
    Thanks for the help

    In general, you can order the AC adapter directly from HP or you can try eBay. Unfortunately, you forgot to mention the model number of your notebook and the Forum members can NOT guide you to the correct web page so that you can order the AC adapter.
    This is an end user Forum and most the members are not HP/Compaq employee. You may need to email the HP/Compaq service center if you need feedback or reply from HP directly.
    Provide either your notebook model number or the part number of your AC Adapter and we can proceed the next step.

  • Macbook pro charger not working sometimes

    Sometimes my macbook pro would not work.. but then other times it would work.. I don't know what's going on and what to do to fix it. My charger also started to be like this today.. on my 1 year anniversary with this macbook -_- Any solutions to?

    Do a SMC Reset and follow the Magsafe links here
     Cheat sheet to help diagnose and fix your Mac
    Backup your data!
     Most commonly used backup methods explained

  • Lumia 920 Wireless Charging not working - Known is...

    I have a Nokia Lumia 920, which works perfectly fine. I haven't had some of the other issues reported here with freezing, apps, etc.
    I have a Nokia charging plate and I've found that no matter what I do the wireless charging plate absolutely does not work. I've turned off Bluetooth, Wifi, turned ON Battery Saver, disabled every background app, even hard reset my phone and tried charging it from stock. The wireless charging plate doesn't even maintain the current battery state - The battery slowly drains hour by hour. I've also tried placing the phone on the charging plate in different positions to ensure it's making good contact. Nothing works.
    Is this a known issue? Is there anyway to identify a defective phone? Is there a possible fix for this? I love my Lumia, but this a killer feature I would expect to work consistently.

    OK, this thread is odd. My charging plate works fine. It has a side with a little ring and Nokia in it, and the other side has an oval of rubber around the periphery with the usual conformance writing on it that side Qi, CE, don't throw it on the trash icon,  Mine works just fine with the Oval down, and the Nokia in the ring up. Is that not what others see?
    I can turn it over, but it is touchy as to whether I can get the light to come on. Usually not. I assumed, initially, the oval went down to keep it from sliding around on the table, and Nokia went up because they want you to know it's Nokia. Has always worked that way. I wish there was a larger rubber something on the 'top' as the phone can slide and spin more than I think it should.
    For what it is worth, I much prefer the charge stand, but the plate is more convenient if I am going to travel somewhere for a while. Couple of days, just charger, week or so, might bring the plate for the hotel.
    BTW, I do get the connect noise when putting it on the charge plate. Sometimes it can take a second otr two. When I take it off, it can take several seconds to get the disconnect noise and the charging icon to go away. If I put it back on the charger before the disconnect noise and the charge icon goes away, it does NOT make a connect noise, though the light comes on. The light will also eventually go off at full charge.

Maybe you are looking for

  • SAP Screen Personas - Can we trigger custom buttom from another screen?

    Hello All, Scenario I would like to implement is something like this. I am in "X" tcode and I have a button B1. On pressing of button B1 I want to go to tcode "Y" and press button B2. Both B1 and B2 are custom buttons. Is this possible in Personas? R

  • Roll out  Project systems

    Hi, Could you share with me regarding the main configurations and checks to be done while roll out the project in the point of Projects Systems(PS) module Thanks sudheer

  • How To Use BAPI_INB_DELIVERY_CHANGE

    Dear All, I did Some R&D About above BAPI But am not getting Clear Idea About what r all The Parameters Need to be passed for The Particular BAPI, I f any body Knows Please Send Some test data and A little bit Clear Information Please Post It.

  • T61 No Videos

    I have a new T61 and am unable to view DVDs.  I have the latest Bios and InterVideo version.  Some DVDs start with the intro screen then go blank, while others show the selection menu but freeze at the menu.  The movie plays in the background, but th

  • COMMPR01 Condition Rate vs ERP Moving Average Price

    Hi, Can someone please explain how the COMMPR01 product u2018condition rateu2019 is maintained in SRM? The reason Iu2019m asking is that the ERP moving average for the same material is different from the SRM COMMPR01 u2018condition rateu2019 value. T