AC3 pass through on Soundblaster Live! 24
Hello,
i just bought a SB Li've! 24bit and i am searching the pass through "switch" for AC3 / DTS.
Can anybody help me?
THX
Martin
P.S.: In my old card SB Li've! Value, i had a tool called audiohq, but now its gone...
thank you, but i have one other problem:
the li've 24bit has got a combined line in / sp-dif port? how can i change from line in to sp-dif?
thx
martin
Similar Messages
-
Encoding Dolby Digital 5.1 (AC3) sound in MP4 files using AC3 pass-through
Looking for an application that will encode Dolby Digital 5.1 (AC3) sound in an .mp4 container using AC3 pass-through for playing videos with surround sound on ATV.
Handbrake is out of the question because I run Tiger. The Tiger version cannot do AC3 pass-through.
Visual Hub is no longer available.
Any other options?You may need Apple's MPEG2 QT plugin as well for MPEGStreamclip.
Also, consider if running windows in parallels/Boot Camp etc that there's a windows version, and possibly a linux version.
VisualHub code was released open source - Google FilRedux and PunyVid (iSquint derivative). Not tried either though. -
ITunes 9 and Dolby 5.1 AC3 pass through doesn't work
I know that this is an old question. But for me, it still doesn't work. I can pass through Dolby Digital to my 5.1 Home Theater system in VLC Player or EyeTV without any problems. However, in iTunes it still doesn't work. When I select the surround audio track of movies purchased from iTunes, I get no audio at all or a completely silent Dolby 2.0 or 5.1 track. But I didn't manage to get real 5.1 sound. I tried to set the digital output to "Encoded Digital Audio" and selected 48 kHz which should match the right setting for movies. But it still doesn't work. What can I do? Thanks for your help!
Re Checked it.
Only AAC stereo tracks on bought movies are 44,1 kHz.
AC3 tracks are 48 kHz. -
OSS, vmix and AC3 pass through
I've been battling OSS for a few weeks now.
I have an ALC889 motherboard chip, and oss-mercurial 4.1-3 package (from AUR installed).
- Vmix works fine, goes through my optical jack out to my receiver, most apps and sounds play through fine, except for mkv, dvd, and any other file with an ac3/dts stream, no passthrough is done. All i get is the static/white noise on both headphones and my DD-ready receiver
- Turning off vmix allows ac3/dts to passthrough to the receiver, with headphones still getting the white noise.
I can live with this if this is the only way to get it to work, but I'm wondering if it's at all possible to get AC3/DTS passthrough working with OSS4 *with* vmix working. Now i know that you cant play digital passthrough at the same time as a regular pcm/mp3 file, and i make sure i have shut off all other audio apps while playing an ac3 file, but it seems kind of a pain in the ass.
On my old nforce motherboard, which uses the nvidia soundstorm (based on OSS), the digital out always works, with ac3/dts passthrough and regular apps sharing the mixer nicely.
So basically I'm wondering is anyone else has OSS working with AC3 passthrough while using vmix, or if you are also having to go through this "turn vmix off, play ac3, turn vmix back on to go back to normal".
the only reason i dont leave vmix off is because skype-oss only works with vmix enabled on my system, so I have to always go through the process of turning vmix on/off, closing all sound apps, restart OSS, use the app I want, and turn vmix on/off again, and restart OSS again.
I'm not interested in "try alsa" solutions because that has its own can of worms for me that I'd rather avoid.
Using the latest kernel, oss-mercurial, sound otherwise works fine for all apps, it's just the ac3 passthrough that i'm trying to get to work in vmix.thank you, but i have one other problem:
the li've 24bit has got a combined line in / sp-dif port? how can i change from line in to sp-dif?
thx
martin -
No AC3/DTS pass-through option on my X-
As the title says, i miss the pass-through option in the console to pass the signal to an external decoder (the whole decoder section is missing). What's the problem? Please help.Message Edited by Nazgul9 on 06-0-2006 06:00 PM
Hey
I see what you mean, but I've sent AC3 streams through the X-Fi card many times. Any way, I'm not looking for decoding abilities, I want the SPDIF signal decoded in an external Klipsch GMX D-5. decoder. I bought the "X-Fi XtremeGamer Fatalty Pro". In entertainment mode the card works fine and I get AC3 from DVD streams read in the external decoder. But in gaming mode using the realtime AC3 software encoder I think theres a problem getting the SPDIF stream through. To be sure of this I headed for the Creative Audio Console and decoder tab, only that the whole section is removed from the console. Please tell me why this option is removed, it's such a frustration when you go ahead an spend alot of money getting a new card, and then basic options are gone.
Thanks for any help given.
-Simon, Norway -
XBox 360/Audigy: SPDIF IN pass through to SPDIF OUT not working with 5.1
Hi,
I've a problem passing my digital dobly signal from my 360 over the Audigy soundblaster to my external decoder. I want to use digital SPDIF IN from the audigy?IO device to pass the signal directly without processing to the external decoder by using the SPDIF OUT.
There is only one digital in at the decoder, so I need this combination if I want my PC and XBox to be connected both without a toslink switch.
I activated the pass through and external decoder option in the audigy console application. I also disabled the DDL encoder. Additionally I set my Windows 7 speaker settings to use SPDIF OUT as standard device.
This is working for every dolby digital signal?from a dvd which I play on my PC, but not for the XBox signal. The signal is not recognized as a 5. dolby digital signal, but as a 2.0 signal. So something must happen with the signal in the audigy. The XBox settings are correct, because when I connect the toslink cable directly to the decoder everything works fine.
My drivers are the newest one (3.8)?from the support pack.
I don't want to use the DDL option, because the latency is much to high to allow regular playing!
Is there a possibility to pass the XBox signal through to my decoder by using the digital in and out of the audigy?
Thanks in advance,
AxelHi I have the same probleme, exept that I have succesfuly pluged my home theater receiver and the 5.1 works. Just my subwoofer seems not to work properly. Like when I plug it into a digital dvd player it works very nicely. but when pluged into the sound card it seems that it dosnt have any signal for it.
ANy clues??? I know i pluged everything finely I have tested the sound test for each speaker and sub to, from the receiver and from the creative software the sub seems to work but very quietly even if I cran the volume up on the sub or in the software , the sub dont work as it should.
1 thing I remarqued is that the sub works occasionaly in some movies. When listening to the music it not working and I dont understand that. -
Is there anyway to use my DV camera's pass through mode to record direct from a VHS player into my Mac?
I have all the physical cables and equipment and used to be able to do this with ease using iMovie4 (the easiest way being to set my camera up with no tape in when in VCR mode and getting its input from my VHS player)
Now with iMovieHD, it does not allow for import when there is no tape in the camera.
The tedious way around is to record from VHS onto miniDV, then import from miniDV to iMovie. But why can it not be done like it could be with iMovie4? Are there any work-arounds or 'patches' that can be installed to fix this negative development?Any idea whether this update (dated April 2005) did the trick in resolving the problem or not. Obviously I'll download it and try it out, but you may already know the answer?
About iMovie HD Update
iMovie HD 5.0.2 update addresses issues related to video and audio synchronization for DV projects and other issues. These include:
-Audio in PAL widescreen
-Sharing (exporting) HDV to videocamera tape
-Synchronizing with HDV 720p content
-Importing video from a DV videocamera when using analog passthrough or recording live video -Compatibility with some analog-to-digital converter boxes
-Capturing video with Hi-8 (Digital 8) devices
-Placing titles over DV content
-Playing iPhoto slideshows that include protected content
-Opening iMovie 4 projects that use speed-adjusted clips.
Found at http://www.apple.com/support/downloads/imoviehd502.html -
How do I enable SPDIF pass through on Audigy 2 ZS Notebo
I'm trying to pass Dolby Digital from a DVD played through Cyberlink Power DVD to my home receiver. Power DVD is set to output SPDIF. It seems that the Audigy 2 ZS is doing the decoding, then passing it to my receiver as 2 channel PCM. I can't find anywhere in the documentation where I can pass through the bitstream. It's just a regular movie with a standard AC3 soundtrack. Thanks for any help.
Message Edited by acribb on <SPAN class=date_text>0-07-2006 <SPAN class=time_text>08:43 PM
Message Edited by acribb on 0-07-2006 08:50 PMhttp://us.creative.com/support/kb/article.asp?l=2&sid=2929
Maybe you need to switch into Advanced Mode?
http://us.creative.com/support/kb/article.asp?l=2&sid=7460
jutapa -
Data has changed after passing through FIFO?
Dear experts,
I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
Short description:
I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
What I have done so far:
I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
A I/O 1 --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
A I/O 2 --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
This code shows NO weird behaviour and works as expected.
The Problem:
To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
Thank you very much,
Bjorn
Attachments:
FPGA-code.png 61 KB
FPGA-output.png 45 KBDuring the last couple of days I tried the following:
1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
4. Right now the code is compiling with constants as inputs like you suggested...
I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
Buffer 1 and 2:
- Type: Target Scoped
- Elements Requested: 1023
- Implementation: Block Memory
- Control Logic: Target Optimal
- Data Type: U16
- Arbitrate for Read: Never Arbitrate
- No. Elements Per Read: 1
- Arbitrate for Write: Never Arbitrate
- No. Elements Per Write: 1
The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often? -
Cisco ASA 5505 L2TP Pass through
I am having trouble with L2TP pass through on an ASA 5505 device.
L2TP server: OSX 10.6
I can connect with any OSX system and it works fine straight away.
When connecting with a windows computer I get a 789 error. "Error 789: The L2TP connection attempt failed because the security layer encountere a processing error during the initial negotiations with the remote computer."
I did not setup or configure the device to start with and apart from this issue its working fine so I am hessitant at trying to just mess around too much to try and find the problem.
I am using the ASDM 6.4 to manage the device.
Ports look to be forwarded correctly; 1701, 4500 & 500 UDP.
Im just looking for other common issues?
RobBelow is the commands you wanted.
Where you see: IPNOTWHATIWASEXPECTING
This is an IP I dont know. possible and old IP address.
and
default-domain value domain-notcorrect.local
This is an old domain from years ago.
Result of the command: "show run crypto"
crypto ipsec transform-set aes-sha esp-aes esp-sha-hmac
crypto ipsec transform-set aes-192-sha esp-aes-192 esp-sha-hmac
crypto ipsec transform-set aes-256-sha esp-aes-256 esp-sha-hmac
crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set transform-amzn esp-aes esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map map-dynamic 1 set pfs group5
crypto dynamic-map map-dynamic 1 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 2 set pfs
crypto dynamic-map map-dynamic 2 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 3 set pfs
crypto dynamic-map map-dynamic 3 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 4 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer IPNOTWHATIWASEXPECTING3
crypto map outside_map 1 set transform-set ESP-DES-SHA
crypto map outside_map 2 match address acl-amzn
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer IPNOTWHATIWASEXPECTING IPNOTWHATIWASEXPECTING
crypto map outside_map 2 set transform-set transform-amzn
crypto map outside_map 255 ipsec-isakmp dynamic map-dynamic
crypto map outside_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto isakmp policy 11
authentication pre-share
encryption aes-192
hash sha
group 5
lifetime 86400
crypto isakmp policy 12
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 13
authentication pre-share
encryption aes-192
hash sha
group 1
lifetime 86400
crypto isakmp policy 21
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 22
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 23
authentication pre-share
encryption aes
hash sha
group 1
lifetime 86400
crypto isakmp policy 31
authentication pre-share
encryption 3des
hash sha
group 5
lifetime 86400
crypto isakmp policy 32
authentication rsa-sig
encryption des
hash sha
group 1
lifetime 86400
crypto isakmp policy 33
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 34
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Result of the command: "show run group-policy"
group-policy evertest internal
group-policy evertest attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy petero internal
group-policy petero attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy awsfilter internal
group-policy awsfilter attributes
vpn-filter value amzn-filter
group-policy vpnpptp internal
group-policy vpnpptp attributes
dns-server value 10.100.25.252
vpn-tunnel-protocol l2tp-ipsec
group-policy vanheelm internal
group-policy vanheelm attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy ciscoVPNuser internal
group-policy ciscoVPNuser attributes
dns-server value 10.100.25.10
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy chauhanv2 internal
group-policy chauhanv2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy oterop internal
group-policy oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy Oterop internal
group-policy Oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
group-policy chauhanv internal
group-policy chauhanv attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy bnixon2 internal
group-policy bnixon2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
Result of the command: "show run tunnel-group"
tunnel-group ciscoVPNuser type remote-access
tunnel-group ciscoVPNuser general-attributes
address-pool vpnippool
default-group-policy ciscoVPNuser
tunnel-group ciscoVPNuser ipsec-attributes
pre-shared-key *****
tunnel-group petero type remote-access
tunnel-group petero general-attributes
address-pool vpnippool
default-group-policy petero
tunnel-group petero ipsec-attributes
pre-shared-key *****
tunnel-group oterop type remote-access
tunnel-group oterop general-attributes
address-pool vpnippool
default-group-policy oterop
tunnel-group oterop ipsec-attributes
pre-shared-key *****
tunnel-group vanheelm type remote-access
tunnel-group vanheelm general-attributes
address-pool vpnippool
default-group-policy vanheelm
tunnel-group vanheelm ipsec-attributes
pre-shared-key *****
tunnel-group chauhanv type remote-access
tunnel-group chauhanv general-attributes
default-group-policy chauhanv
tunnel-group Oterop type remote-access
tunnel-group Oterop general-attributes
default-group-policy Oterop
tunnel-group chauhanv2 type remote-access
tunnel-group chauhanv2 general-attributes
address-pool vpnippool
default-group-policy chauhanv2
tunnel-group chauhanv2 ipsec-attributes
pre-shared-key *****
tunnel-group bnixon2 type remote-access
tunnel-group bnixon2 general-attributes
address-pool vpnippool
default-group-policy bnixon2
tunnel-group bnixon2 ipsec-attributes
pre-shared-key *****
tunnel-group vpnpptp type remote-access
tunnel-group vpnpptp general-attributes
address-pool vpnippool
default-group-policy vpnpptp
tunnel-group IPNOTWHATIWASEXPECTING4 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING4 ipsec-attributes
pre-shared-key *****
tunnel-group evertest type remote-access
tunnel-group evertest general-attributes
address-pool vpnippool
default-group-policy evertest
tunnel-group evertest ipsec-attributes
pre-shared-key *****
tunnel-group evertest ppp-attributes
authentication ms-chap-v2
tunnel-group IPNOTWHATIWASEXPECTING3 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING3 ipsec-attributes
pre-shared-key *****
tunnel-group IPNOTWHATIWASEXPECTING2 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING2 general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING2 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
tunnel-group IPNOTWHATIWASEXPECTING type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsec"
INFO: There are presently no active sessions of the type specified
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsecOverNAT"
INFO: There are presently no active sessions of the type specified -
How can I have each pass through a for loop communicate with a new indicator?
Hello,
I am using 16 color boxes to indicate how 16 channels are behaving. If a color box is blue, its respective channel is running correctly, red means it has failed etc. I am continuously checking each channel using a loop, and I wanted to update the channel colors every loop. I have made an array of 16 numbers corresponding to the color I wish to have (which are blue = running, red = failed, green = completed, black = not in use). However, I cannot find a way to pull these 16 numbers out of the array and to the color boxes short of 16 index arrays connected to the color boxes.
I understand how to convert each individual number to a color, I just don't know how to use a 16 times for loop to communicate with a different color box each pass through. Is there any way to do this or should I just go for brute force?
Thank you.
Solved!
Go to Solution.Sorry I keep making new posts. Attached is an example i wrote up. There are three cases in the disabled structure, each has a different implementation of what i belive your specs are.
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect
Attachments:
update color box.vi 24 KB -
New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?
New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?
-
USB Pass-Through From Windows 8.1 Host To Windows Server 2012 R2 VM
I want to be able to connect with a Windows Mobile Device through Windows Mobile Device Center, within a Virtual Machine. When connecting through the Hyper-V Manager and through Remote Desktop, under "Other supported RemoteFX USB devices",
I can see the Symbol USB Sync Cradle. In the VM, in Device Manager, I don't see a USB connection. In the VM, I don't see any meaningful errors in the Event Viewer.
Host: Windows 8.1 Enterprise Hyper-V on a Domain. Upgraded from Windows 8.1 Pro. When this computer was originally installed with Windows 8 Pro, Hyper-V was enabled. I removed Hyper-V, and installed VMWare Player, because I wanted
USB Pass-through. I then uninstalled VMWare and installed VirtualBox. Recently, I uninstalled VirtualBox, upgraded to Windows 8.1 Enterprise, and enabled Hyper-V.
Virtual Machine OS: Windows Server 2012 R2 on a Workgroup. Started out with being a VMWare VM, using VMWare Player. Moved to VirtualBox. USB Pass-through was working in both those virtual environments. Used Disk2VHD to convert the
VM to a VHDX file.
On the Host:
Windows Mobile Device Center is connected to a Motorola Windows Mobile Device (MC959X) sitting in a Symbol USB Cradle. The OS on the scanner is Windows Embedded Handheld 6.5 Classic CE OS 5.2.29217 (Build 29217.5.3.12.26). Advanced Networking
(USB to PC) is not enabled.
Enabled RemoteFX.
In the RDP file, and in the Registry, added the GUID's for:
WPD "{eec5ad98-8080-425f-922a-dabf3de3f69a}";
Windows Mobile "{6AC27878-A6FA-4155-BA85-F98F491D4F33}";
USB Device "{88BAE032-5A81-49f0-BC3D-A4FF138216D6}";
Windows CE USB Device "{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}";
GUID_DEVINTERFACE_USB_DEVICE "{A5DCBF10-6530-11D2-901F-00C04FB951ED}"
Ran "sfc /scannow"
All Microsoft Updates are current.
What am I missing?I hope it's something like that. Those features have been installed. Here's what PowerShell shows is installed:
PS C:\Windows\system32> Get-WindowsFeature |Where {$_.Installed -eq "True"} | ft DisplayName, Installed
DisplayName
Installed
File and Storage Services
True
File and iSCSI Services
True
File Server
True
Storage Services
True
Remote Desktop Services
True
Remote Desktop Licensing
True
Remote Desktop Session Host
True
Web Server (IIS)
True
Web Server
True
Common HTTP Features
True
Default Document
True
Directory Browsing
True
HTTP Errors
True
Static Content
True
HTTP Redirection
True
Health and Diagnostics
True
HTTP Logging
True
Performance
True
Static Content Compression
True
Security
True
Request Filtering
True
Windows Authentication
True
Application Development
True
.NET Extensibility 3.5
True
.NET Extensibility 4.5
True
ASP.NET 3.5
True
ASP.NET 4.5
True
ISAPI Extensions
True
ISAPI Filters
True
Management Tools
True
IIS Management Console
True
.NET Framework 3.5 Features
True
.NET Framework 3.5 (includes .NET 2.0 and 3.0)
True
.NET Framework 4.5 Features
True
.NET Framework 4.5
True
ASP.NET 4.5
True
WCF Services
True
TCP Port Sharing
True
Ink and Handwriting Services
True
Media Foundation
True
Remote Server Administration Tools
True
Role Administration Tools
True
Remote Desktop Services Tools
True
Remote Desktop Licensing Diagnoser Tools
True
Remote Desktop Licensing Tools
True
SMB 1.0/CIFS File Sharing Support
True
User Interfaces and Infrastructure
True
Graphical Management Tools and Infrastructure
True
Desktop Experience
True
Server Graphical Shell
True
Windows PowerShell
True
Windows PowerShell 4.0
True
Windows PowerShell 2.0 Engine
True
Windows PowerShell ISE
True
WoW64 Support
True -
Static NAT pass-through; can not get to work
I am not having any luck getting a static NAT pass-through to work.
BM3.8/NW6.5 all patched to the latest patches (no betas). IPFLT is NOT
loaded.
My internal network on one LAN all have 10.100.xxx.xxx private addresses.
Dynamic NAT works great.
I have secondary public IP addresses bound to my public NIC. Static NAT
mapping between the secondary public IP addresses and the couple of
individual private addresses work just fine. In other words, all has been
working fine.
I need to give one of those internal resources its public IP address
(change it's private to its public).
OK, I went into the NAT table and changed the proper public <-> private to
public <-> public (identical addresses). I changed the internal computer
to it's public address/mask with the same default gateway the server is
using. The internal computer can now only ping itself; can't even ping
it's default gateway. I did reinitialize, and also restarted. I can not
get the pass-through connection to work.
Any thoughts will be well received.
BobRobert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
IVI class driver (layer) will provide interchangeable feature for a IVI class specific driver. It would work as a pass-through layer and finally make calls to the IVI class specific driver. Since there could be a lot of functions to be passed through. Are there any tools from NI (Labwindows/CVI or Labview) can do this ?
Thanks a lot.
BTW: the IVI class specific driver interface is generated from Labwindows/CVI tools.Hi Chris,
Yes, I did. To support interchangability, from my understanding of the IVI specs, there should be another layer IVI-C class driver on top of this IVI class specific driver. As in the IVI‑3.1: Driver Architecture Specification:
Although IVI‑C class drivers export inherent,
base, and extension capabilities, they do not actually implement them. Except
for a few inherent functions and attributes defined exclusively for class
drivers, class driver functions and attributes provide a pass‑through layer to
the IVI‑C specific driver. An IVI‑C specific driver is responsible for
implementing the operations of functions and attributes and for communicating
with the instrument. The IVI‑C specific instrument driver contains the
information for controlling the instrument, including the command strings,
parsing code, and valid ranges of each instrument setting"
So where is this IVI-C class driver and how is it created and communicate with my class specific driver?
Thanks a lot.
Cheers,
IVI‑3.1: Driver Architecture Specification
Maybe you are looking for
-
Provider is not compatible with this version of Oracle client
I am trying to access Oracle(10.2) DB from a .NET 2.0 Console Application.(.exe) in a Win 2008.Web code is also on the same Win 2008 system The Web application works fine and connects to teh DB , but when I try to run any of the Console applications
-
I have a problem with the indicator for power on the side of my HP DV6-1341el.
I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic progra
-
Partition by virtual column, select - sinlgle partition on two columns
Pls, I have a question - we have table with COLUMNs: -- TIME_KEY - julian - date value (to_char(sysdate, 'J')) - we would like to have virtual date value: -- TIME_ID - virtual column with interval partitioning (great!) CREATE TABLE lsd_cntr_pokus ( t
-
Time Machine restore to new hard drive fails
This is on a Mac Mini (Early 2009), 8GB RAM, that was running the latest version of Mavericks. This all started when the 120GB hard drive began failing. The computer was running slow so I tried to repair permissions to no avail and also to repair t
-
What the &*&?% My send button in mail is now a chat button Would just like to get it back to send thx