AC3 sounds garbled when played back through the asset window

i have a 5.1 AC3 file i made with A.Pack with DVDSP3 (now using DVDSP4) and when i played the file back in my asset window via S/PDIF out on the Mac to a Dolby Digital Capable 5.1 amp (having the prefs in DVDSP set to SPDIF not default in the simulation pref window)...it sounds REALLY garbled.....i know what a raw AC3 file sounds like played back throught a standard amp (like a code-not being able to hear anything BUT that)...and the file i tried to play back was still barely understandable...but sounded like a robot. is this a bug or am i doing something wrong?

Awesome! This fix worked for me as well. I too don't know what happened after my system had been working just fine for years, then today it was all garbled. All is well now. Thanks!

Similar Messages

  • MTS files jerky when played back in the Editor of Premiere Elements 12

    Hi ATR
    I know there is only you that helps us Adobe users with problems!!
    I have now got Photoshop 12 and premiere Elements 12 set up yey!! so now I want to start my editing
    So I go into Premiere Elements Editor and choose my files which are on my hard drive
    These are MTS files that have been taken with my Sony Cybershot DSCHX20V however when I try to play back the videos they are jerky so I am unable to edit them
    Now I know I asked this question before when I had the trial of 13 and you got it working for me but I cant find the answer
    There is no orange or green line so I am unable to render the videos
    In the project settings it says display format as 25fps Timecode
    Frame size 1920 hoizontal 1080 vertical
    Hope you can help
    Jilly

    Morning ATR
    The camera was set for AVCHD and so the videos that were taken are in the format AVCHD mts. I since changed it to mp4 format but the videos that I want ti edit are in mts format and like I mentioned they are jerky
    When I am in the organiser of Premier 12 and I can hear the playback so that is ok but its jerky as well as the editor. I've also noticed that playing back in the organizer, the playback is very pixelated?
    1. Forced Timeline Rendering
    i did exactly what you said ATR and changed the time stretch to 99% and that worked perfectly!! You're a genius!
    2. AVCHD.mts versus AVCHD.mp4
    I found an MP4 format video and added it to my timeline with the MTS files and that one play ok. The time stretch on that file is at 100% so do I have to keep changing this to 99% all the time or only when its choppy and jerky?
    Step 3 you asked me to do the below
    From an AVCHD.mts 1920 x 1080 @ 25 progressive frames per second) project, export to Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p25 and
    tell us if the playback is smooth.
    Then, from an AVCHD.mp4 1920 x 1080@ 25 progressive frames per second) project, export to Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p25.
    Then compare the smoothness of the playback of each.
    From looking at my project settings the timebase is showing 50.00 frames/second?
    You have said from a AVCHD.mts 1920 x 1080 @ 25 progressive frames per second) project? Do I need to change this now?
    Would you be able to tell me how to do a screenshot in windows 8 please? It would be so much easier but I am struggling to do it on the website itself
    Thanks ATR
    Jilly

  • When playing music through the audio port on my macbook pro only the left speakers/headphones work. external speakers are fine!

    I am having problems with the 3.5mm audio jack on my mac book pro. its been just over a year and now when i connect 3.5 headphones or speakers they only play the left speakers. the right speakers do not work.

    If you go to System Preferences (from the Apple menu) > Sound and select Output, how is the Balance slider set? If it is all the way to the left, put it in the middle.
    Best of luck.

  • I have just added new CD (Rod Stewart Unplugged) to iTunes. It sounds awful - crackly and distorted - when played back thorugh my laptop and on iPod Classic. The CD sounds great on my CD player. (Other CD record fine onto iTunes). How can i fix this?

    i have just added a new Cd to iTunes on my laptop and then transferred to iPod classic (CD: Rod Stewart Unplugged). When playing back on the laptop or iPod the recording sounds awful - very crackly. On the Cd player it sounds fine. What is the problem and how can it be fixed? (Otherr CDs record fine onto iTunes)

    Hi there,
    I would recommend taking a loook at the troublehooting found in the article below.
    iTunes 11 for Windows: Import songs from CDs
    http://support.apple.com/kb/PH12486
    -Griff W.

  • Audio doesn't play back through DAE audio tracks

    I work on Digidesign HD hardware and Logic as a front end and a problem has crept in over the last week or so.
    I will be working on a song and suddenly with no warning Logic freezes for about 30sec or so. After this all audio files playing back on DAE tracks will not playback or white noise plays back from those track. The DTDM tracks and instruments tracks work fine. This happens wether i have a couple of tracks on the go or loads. It's like the DAE audio playback side crashes but all other things still play back through the DAE so it half works.
    PLEASE PLEASE help as i have to reboot Logic everytime and 10-20 mins later it happens all over again.
    Thanx
    G5 dual 2Gh   Mac OS X (10.4.2)  

    Just some quick thoughts....I'm not a "techie", but have had my share of softwaretrouble!!
    It could be that Logic is set to global 16bit - and you try to play back 24bit files. Had kind of same problem a year ago, but don't remember if it was Logic OR ProTools that gave this result (played for a while...then a burst of white noise). But the crash...no. This is probably caused by other components. It's usually a good thing to trash the Logic preference file and restart. Then check preferences>audio>drivers>DAE that the global bitrate is set as desired (according to your already recorded files). The DAE preferences don't contain that much information, but could be helpful to trash too. Just remember to set the playback buffersize to a reasonable amount for your setup.
    Hope this will help.
    G5 Dual 1.8 / 3GB RAM   Mac OS X (10.4.6)   Logic Pro 7.2/ProTools 7.1 HD2 Accel/192 IO

  • No sound when playing back videos, 10 out 14 taken all on the same day!!

    Ok strange 1, took videos this morning using my iPhone 4, when played back the sound was fine could hear everything, i took 10 more, i could hear no sound from these 10, i took 2 more when i got home they were fine, the phone was held in different ways all day so i wasnt covering anything, obviously some worked before and after so there isnt a problem with the microphone. tried restoring but I dont see the point if some have sound and some dont, have uplaoded to youtube and played back on the computer with the same problems, anyone any ideas?

    You could try either a Backup Restore or a Clean Restore. I usually do a CR with MobileMe as the restore source. Afterwards I reload the music, videos and apps.
    It could be a sound playing bug like the Bluetooth bug that bites me now and then (audio stops and goes once in a while, audio gaps in the video if the video is paused, and videos recorded have the audio very quiet).

  • Dropped frames when playing section in the timeline w/audio, Viewer plays fine. Plays for 1 sec, no sound, nothing on audio meters. Problem out the blue, made no conscious changes. FCP 7.0.3. iMac, 2.7 GHz Intel Core i5. OS10.8.4. Thanx.

    New to FCP. Dropped frames when playing section in the timeline w/audio, Viewer plays fine tho. Plays for bout 1 sec with no sound, nothing showing coming through the audio meters. Problem came out the blue, made no conscious changes to settings. FCP 7.0.3. iMac, 2.7 GHz Intel Core i5. OS10.8.4. If any other info needed please let me know, will be happy to provide it. Thanx.

    Thank you for the help. Below is my Source footage and sequence settings.
    The other footage I have on the timeline is an mp3 file made in Garage Band and some footage I sent to Motion to edit. I do have some offline media on there since I switched computers but FCP had been working fine for a few months with it on there. I have not tried trashing my FCP Preferences. If I did would I have to back up my project?

  • IPod plays music through the speaker on the back

    Hi,
    My new iPod nano 5th generation seems to play music through the back speaker for the camera and voiceover options. When i plug in my headphones, it will play through those, as well as the speaker, but even when I unplug the headphones, it plays through it still. This is annoying to the people around me to hear. Does anyone know how to fix it, i've gone through the settings on my iPod but I can't seem to figure how to turn it off and only have the music play through my headphones. Anybody have the same problem? How do I fix it?
    Thanks so much for your help.

    Is the speaker really on the back? I had been trying to figure out where the sound was coming out, and thought I had narrowed it down to the hole where the earplugs plug in. I tend to lay my iPod down on its back, and it doesn't seem to muffle the sound.
    Cutie962, I don't know about sound in general through non-iPod earphones, but in order to use the radio, you need the right earphones, because the antenna is in the cord. I can't use the delivered ones, because either I just don't know how to use them or my ears are the wrong shape - they just fall out immediately. I was trying to figure out which ones Apple sells also have the antenna for the radio, but they don't seem to list that information. I kind of like the pink ones that hook over the ear, but it would be a waste if they won't work.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • So i got my iphone 6 and works fine with the bluetooth on my lexus until i plug in the charger.  When i do so the music you can't hear the music.  When i have it unplugged the music plays fine through the speakers.

    So i got my iphone 6 and the music works fine with the bluetooth on my lexus until i plug it in to the USB charger.  Then you can't hear the music.  When i have it unplugged the music plays fine through the speakers.
    When i get in the car, if the audio is set on bluetooth the music will start playing automatically without me doing anything even if i don't have the music (itunes) running. 

    Hi . I Reset My iPhone & I Do Not Know The iCloud To Get pass Activation Screen.I Need To Find Out My IMEI Number From Here.My Phone Doesn't Take A Sim So It's Not On The Slot. It's Not Located On The Back Of My Phone. & When I Press This "i" on the Home Screen A Different Number Pops Up But Not The IMEI . Can You Please Give Me Answers To Find My IMEI Number !!??

  • When I import my files only the audio plays back not the video. If I export the sequence its there?

    When I import my files only the audio plays back not the video. If I export the sequence its there?
    I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
    Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
    As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
    Any help would be appreciated and if theres any more info I can provide please let me know.
    Thanks
    Drew

    Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
    Also, More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

    When I download my Final Cut pro project onto a DVD about 3-4 photos are continually repeated throught the presentation. If I play back via the computer this does not happen. It is the same photos repeated. I have taken loop off from view. Any assistance ?

    I have two projects one with DVD and photos and the other just photos. The DVD is 20 mins and the photos just 8 mins.
    I have tried to burn from the share dropdown menu  ( DVD ) in FCXP and also tried download to media browser then used DVD creator to produce the DVD but the problem exists with both actions. I deleted the repeated photos from the presentation but another 3-4 different photos repeat. I hope this makes some sense .
    thanks salty777

  • I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.

    I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.

    Does Phillips say it will work with a 4G iPod with 6.1.5?
    Have you went to their support site?
    Which dock did you get?
    This one
    http://www.usa.philips.com/c-p/DS8500_37/-/specifications
    says only compatilbe with the 1G, 2G and 5G iPod tpouchs (as well as some other iOS devices)

  • My iPhone plays music through the phone speakers when I plug in headphones. Can anything be done about this?

    My iphone4 plays music through the phone's speaker when I plug in my headphones. Is there any way to fix this?

    I'm having the same problem... just got this phone as a replacement for a iphone with bad wifi..******

  • When playing back stills, how do I turn off the G..D...n zoom?

    When playing back stills in imovie, how do I turn off the G..D...n zoom? I just want it to show stills, STILL, zoom-effects do not go well with a serie of meditative fotos of sculptures.... thank you. Anyone?

    Hi
    It's called Ken-Burns effect.
    Click on one photo in Project.
    Then You see a small cogg wheel like symbol
    - click on it and a menu opens where at bottom You can
    - select Crop/Ken-Burns/Rotation - select it
    Now in Viewer/Canvas at top set Size (Adjusted) from Adjust/Crop/Ken Burns menu - now the picture will show in full and no zoom.
    As You see - there is a linguistic barrier when not having an English version of iM.
    Yours Bengt W

Maybe you are looking for