Acc Assgnmnt details to be made non editable in MIRO for acct assgnmt cat A

Hi All,
1.How to make Account  Assignment details  ( like GL account,  WBS element etc ) to be made non editable in MIRO ( Invoice)  for account assignment category  A (Asset) ? .
This means that  the account assignment details  in  Invoice verification  (that is picked already  from PO after GR ) for account  assignment category  A  should not be allowed to be changed in Invoice verification.
In configuration, for account assignment category, the tick mark for " account assignment changeable" and " account assignment changeable at IR" have already been removed.
Still SAP allows Account  Assignment details  ( like GL acc, WBS element etc ) to be changed in MIRO.
Where else changes are to be done?
2.Is there also a way to restrict this non editable feature of Assgnmnt details  in  Invoice verification  for only one G/L account even  further within this account  assignment  category  A ?
Thanks & Regards,
Hari

Hi
chcek in OB41 for miro field seletion options

Similar Messages

  • How to made Qty field as non editable in MIRO

    Hi SAP Gurus,
    While Post a Goods Receipt (MIRO) for Receive the Material from Job
    Worker, the Qty of Raw Material which needs to Issue or consume from
    Stock will propose as per PO BOM. The Qty field of Raw Material is in
    Editable Mode. Business wants that Qty Field to be Non-editable and not
    to allow user to Change the Proposed Qty. As per PO BOM and based on
    Material Received from Job Worker, Raw Material has to Issue or Consume
    from Stock. If any Under Consumption or Over Consumption will be
    adjusted thru MB04.
    Pls let me know is there any setting to make Raw Material Qty field as
    non editable.
    Thanks & Regards
    Sathish
    Ph:9940518715

    Hi,
    There is no field selection in MIRO.
    USE SHD0 and create a screen variant
    Thanks & regards,
    Kiran

  • Text editor control to be made non-editable

    Hello Experts,
    Need a small help from you people.
    I need to make a text editor control  non-editable,i n a sub-screen; depending upon the value of a field on the main screen. Can you please let me know of the easiest way out with this?
    Thanks in advance,
    Kumud.

    HI,
    You can write a code in PAI of main screen. there by using loop at screen you can make that field editable or disabled.
    Code sample:
    loop at screen.
    ****condition for value check
    if screen-name = 'TEXT_EDIT_NAME'
    screen-output = 1.
    screen-input = 0.
    modify screen.
    endif.
    endloop.
    Hope this will help you.

  • Exchange rate in PO to be made non-editable after posting a GRN

    Hi Gurus,
    The requirement is to mask the exchange rate field in purchase order once a goods receipt is posted.
    We have tried to make the field as display only in ME22N, but that doesnot suit the requirement as we couldnot edit field in ME22N before GRN.
    Thanks a lot.
    Regards,
    Sathish K

    Hi Sathish K,
    The only solution is to make a custom program that can validate if the PO has a GR assigned.
    You need to check the following data once the PO wants to be changed (ME22N and ME23N):
    If in any item of the PO, the "Qty delivered" (EKET-WEMNG) is more than zero, AND
    the item is not marked as deleted (EKPO-LOEKZ), THEN
    the Exchange rate (EKKO-WKURS) cannot be changed.
    I hope this help.
    Kind regards,
    Sandra

  • COST CENTRE field to made non-editable for a particular ROLE

    Hi all,
      We ar running on SRM 4.0(Classic)..I have a query regarding the COST CENTER field under the node COST ASSIGNEMNT in the item deatils when i add an item to the SC.Here at our place,we have kept the field editable with F4 help only given for a particular role.
    However for other roles,there is no F4 help given for this field.Now i need to make this field 'DISPLAY' for these roles for which the F4 is not given.....
      Can anyone tell me whcih std program i will need to change wherin  for this field i can put up a check as to whcih roles the USER belongs to and based on that info i can make this field display?
      Any help is highly appreciated..Please help.
    BR,
    Disha.

    Hi,
      Any suggestions??
    BR,
    Disha.

  • To make the dynamic text eg. & GV_VALUE& non-editable in text modules

    Hi Experts,
                My requirement is to make the dynamic text in the text modules non-editable i.e, static text can be edited by the user but dynamic text should be made non-editable. Could you please help me out in doing this.
    Regards,
    Payal G

    Hi Amrendra,
    The reason why it gets read only its because you are deleting the object thus the binding becomes null (because the object is gone!!!). So if you don't want it to be gone, it needs to refers to anything but null. So, if once you delete the object you expect it to remain editable then you can do:
    - Instead binding the inputText to the VO, bind it to some other variable (in a bean or in a binding variable) and do the logic to update the VO when required OR
    - Once you delete the row, Execute a CreateInsert operation from your VO. This will allow you to create a new Row (which is going to have all values blank) but at least the binding wont be null and your input text wont get read only.
    Maybe if you share in more details what is what you want to achieve in term of why do you expect the input text to remain editable (can you create a new row??)
    Regards

  • How do I save a PDF as non-editable?

    I have a form that I filled out with Adobe Professional 7.0. What options do I select to make sure it saves as non-editable? Thanks for any help.

    Hey David, add some security to it. You can even keep people from printing it if you want to, or even need a password to open it.
    J.R.

  • Making the whole po line item as a non editable one (Greyed out)

    Hi all
    can any one please let me know is there is any way we can grey out the whole line item,
    i mean to say non editable mode.
    i am working on a user exit where based on certain field entries i have to make the whole line
    item as an non editable one.
    For example po change transaction if there are 5 line items i want to make the three as a non editable one and i have a user exit
    with me but dont have the idea of how to make it geryed out.
    Thanks in advance.
    Joe

    Hi
    Do you have a PO release strategy implemented. This can be done through PO release strategy. please tell  the exact requirement whether this is for all users ???
    hope it will help
    Regards

  • Fillable PDF to saved non-editable PDF

    I currently have a trial version of Adobe Acrobat 9 Pro and Livecycle Designer ES 8.2. I am looking to create a fillable form PDF and then send it to clients who will use adobe reader to fill the form and then save it as non-editable PDF form for general usage.
    How can this be done?
    Thanks, Vijay

    Hi Michael,
    Thanks much for the response, can you help me with instructions on how I can enable extended rights? Sorry, I am not too familiar with the things in Acrobat or Livecycle.
    Thanks,
    Vijay

  • Enabling the non editable fields

    Hello Friends..
    How to enable a non editable field. For example...how to make Personnel area field in IT0001 into a editable field. For some reason..we need this. Is there a way...?
    Kindly help..
    Thank you

    Hi,
    Assignmwnt which you hav don in info typ 0000 (Prsonnl area) will be as non editbl  fild in info typ 1
    i would like suggstest. instead of doing personnel area field editible, met ur requitmet with prsonnel subarea on same info type 1.
    If it is, there will be no problems
    Friends correct me if i am wrong.
    Edited by: MVRmvr on Aug 19, 2010 1:14 PM

  • (non)Editable field on Myspace & Firefox 3.5/6

    Symptom: flash app has an editable field that becomes non-editable on Myspace, but only when accessing it with Firefox 3.5 or 3.6;
    What's more, it actually can be edited, as long as one right-clicks into the field.
    The app is made with Flash Pro CS5 and embedded on Myspace using AddThis, if that makes any difference.
    The same app behaves just fine in Chrome or IE8. All of these are on WinXP, in case that's at play.
    My skills with flash are limited, so I'm at a loss as to where things would go wrong.
    As these apps are also working just fine on other sites, I'm guessing this is very Myspace limited issue, but what?
    thanks,
    karoy

    I had the same problem.  Called HP support and that was useless.  They tried to help me restore to before the problem but the restore wouldn't work!  In the end they wanted me to restoer to factory settings.  All because they haven't bothered to test their update with some pretty standard software (firefox).  I always get the same response from their service folks - "you are using software that is not from HP so we can't really help you".  Well, yeah - uh, I occassionally do use software on my laptop that is not made by HP.
    I had high hopes for moving from Dell to HP, but am just disappointed over and over again.  Perhaps my expectations were too high, but never the less, I will not buy an HP laptop again.

  • Item field to non-editable mode(display mode) in Purchase Order(ME22n).

    Hi SDN,
    Based on the Comany code i need to modify the item level fields like <b>Item, Account Assignment, Material</b> to non-editable mode(display mode) in Purchase Order(ME22n).
    So i modifed in the method MODIFY_SCREEN_TC_LINE of class CL_TABLE_VIEW_MM and set the value L_FIELD_STATUS = *  for the screen filed MEPO1211-EBELP. When i execute, the whole column changed to display mode and the empty rows filled with 0(zero). But i want only grey mode for the line items that are present for that PO but not for the whole column. So can any one guide me to do so. I am using 4.6c.
    Thanks in Advance
    Regards
    Basha

    Hi Ramesh,
    Normally you can change the currency field, after entering information in Data base's table, go to Detail's table and change the rate as you want, then directly choose your PO number.
    so the system accept the rate entered aven though the PO had another rate.
    Regards.

  • Payment block non editable on the basis of company code level

    Dear Gurus,
    we had made payment block "A" non editable in payment praposal through transaction code ob27.as per reqeust from
    our partent company in India but our subsidiary in France wants the payment block "a"  to be editable (to be insert
    payment block "a" in document to make document deselect). Is it possible to make payment block editable on the basis of
    company code level.
    Regards,
    Rajesh

    Hi,
    In this scenario, you need to have a NEW Payment block key like Z. Create Z with reference to A in OB27.
    For Z, you need to select check box Change in Payment Proposal and SAVE.
    Now maintain this Z in vendor masters of company code, where you want the payment block can be edited.
    Note: Payment Block codes are not company code dependent.
    Regards,
    SRinu

  • Non-editable element in an InDesign document.

    Hello, all.
    I need to add a non editable element to my InDesign document. This element will be my copyright notice. Although I will be sharing this InDesign document with others and will allow them to modify or customize it to their needs I wish to make my copyright notice non-editable so users will not have the option to remove the notice.
    Is there a way to make an element non-editable in an InDesign document so users can modify anything they want but that one element ?
    Thank you,
    Joe.

    In addition, as I explained on my previous e-mail, it should be difficult to implement such a feature considering Adobe currently offers something similar on its Acrobat application.
    My gut feeling here - not meaning to be offensive - is that you probably have no idea how hard or easy it is to lock something down. I am no developer, but I spend enough time working with devs to have a vague idea how hard it is to make something like what you're describing. And Bob is right about, defeating Acrobat security is trivial.
    It is not difficult but impossible to do what you ask for. All you can do is make it difficult to remove your copyright statement, and that difficulty varies according to the technical skills of the person(s) who wish to remove your copyright statement.. In your shoes, I'd just make it annoying to remove, and that would probably defeat 95% of the casual thieves who would file off the serial numbers and call your work their own. Heck, just locking it would defeat more than half of the casual uncredited reuse, if the frequency of posts here is to be believed. Put it behind a locked transparent frame on a locked layer and you've made it more difficult.
    I think that there may well be an untapped market for the feature you are describing, Joe - but if I were once again in your shoes, I'd be pitching it wherever Framemaker users hang out.

  • Making an editable PDF Form non-editable (a shortcut)

    How to make a PDF form non-editable or locked.
    For those who aren't script-savvy, I believe this may be a little shortcut to editing a PDF form and then saving and sending it as a non-editable or locked PDF.
    This is what I have written out for my client, whom I provided an editable PDF Form, so they could edit the PDF and then send it out to their own respective clients as a NON-editable PDF.
    Instructions as follows:
    How to save your PDF Form into a separate non-editable PDF to send to your client: (Using Adobe Acrobat Professional)
    Step 1. Fill out the original PDF Form
    Step 2. Once finished, go to “File” menu and click “Save a Copy” - title the file appropriately and save it to the desktop.
    Step 3. Close the editable PDF document and do not save it (Saving it will save over the original file). Now open up the PDF you’ve just saved to
                        the desktop (you’ll now take the steps to make this file only non-editable).
    Step 4. In the top menu, go to “Advanced” then select in that drop down menu “Security” then “Show Security Properties” - a ‘Document Properties’ window will now appear.
    Step 5. From this new window, select the “Security” Menu.  Set your ‘Security Method’ to ‘Password Security’.
    Step 6. A new window will appear named ‘Password Security Settings’. In this menu, tick the box that says “Restrict Editing & Printing of the document”
                you’ll need to a) set a password for it,  and  b) In the ‘Printing Allowed’ drop down box, select ‘high resolution’   and if you want to, tick the
                box that says ‘allow the copying of text, images and other content’
    Step 7. Click OK and Save the document. Now it’s not editable unless you have the password.
    Note: If you happen to want to edit the PDF at a later date, you can open the file and in the ‘Security settings’ menu on the left hand side
    (the menu is represented as a little gold lock) click ‘Permission Details’ then ‘Change Settings’ to revert everything back to an editable document
    - repeat the above steps to make it a locked document again.   

    Thanks for your suggestions. You should also consider flattening a form if you want a non-editable copy; because the permissions password is not always respected by third-party PDF applications (for some people the form will remain editable, depending on what software they're using).
    Flattening a form can be done in several ways in Acrobat: you can run a script - this.flattenPages() - or print the PDF back to PDF (aka refrying), or use the Sanitize tool in Acrobat X. It also strips out hidden content associated with the form (button actions, field calculation scripts, etc.) so provides additional data protection. Sanitize is the heavy-duty option of the three; it will remove all hidden content, leaving only what you see on the page.
    One correction to your workflow - the Save a Copy menu item is not intended for creating a duplicate of a normal form, it's only available if the  form has been rights-extended and it serves to remove the extension certificate from the PDF (allowing full editing in Acrobat again). As your client is working in Acrobat they don't need a rights-extended version in the first place, and working with a normal form will make things simpler for them. In Acrobat X Pro you could create them a custom Action which automatically flattens the file and saves a duplicate, so they don't accidentally overwrite the original.

Maybe you are looking for